Uttar Pradesh Jal Vidyut Nigam Limited Tender

First class brick work in 1:4 cement and coarse sand mortar in superstructure including supply of all materials, labour & T&P etc. required for proper completion of work but for walls of one brick thickness.

First class brick work in 1:4 cement and coarse sand mortar in fsuperstructure including supply of all materials, labour & T&P etc. required for proper completion of work but for walls of 1/2 brick (115 mm) thickness.

2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and including 7.5 cm thick base concrete consisting of cement, coarse sand and 4cm gauge I class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.

4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and including 7.5 cm thick base concrete consisting of cement; coarse sand and 4cm gauge I class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.

Applying BIRLA PUTTY or equivalent putty on previously Birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothening and leveling of the surface as per requirement and direction of E/l including cost of all material, labour and T&P required for proper completion of work.

White washing two coat including supply of all materials, labour and T&P etc. required for proper completion of the work.

Painting/varnishing one coat of approved superior quality ready mixed paint or clear synthetic varnish on previously painted old wood or steel work including its rubbing and sand papering and cleaning with supply of all material, labour and T&P etc. required for proper completion of work.

Supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete.

BRASS BIB COCK 15 mm dia. 200 gms( L & K and equi.)

P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

S/F of CP BRASS Piller cock HEAVY QUALITY (L&K or equi.)

Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing 15 mm dia Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing 15 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing, and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials labour and T&P etc. required for proper completion of the work.

Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm. (Hindustan, Cera Make) without "p" trap including supply of all materials, labour and T&P etc. complete.

Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul, Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cleats with C.P. brass screws and washers including supply of all materials, labour and T&P etc. required for proper completion of the work.

Attending minor type of repair for full day by Engaging and supplying one suitable and experience Plumber with kits for attending deffects of water supply pipe line cictern and fixiture with water supply defects within colony with all T&P etc. but excluding cost of material.

Attending minor type of repair for full day by engaging one carpenter for carrying simple type of repairing of all wood work including all wood work including all T&P etc. but excluding cost of material.

Attending minor type work like cleaning of roof terrace works and sun shades and other misc. work by engaging labour for full day including all labour and T&P etc. complete.

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S: angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work. except cost of M.S angle and flat.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres.

Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to 1.S.2202 part-1 (1983) IS marked including 'fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Supply and Laying 6 mm thick glazed tiles in floor and skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P.etc. completion required for proper completion of the work.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Colour washing two coat using approved colour of approved shade as per sample including two coat colour washing including cost of all labour, T&P etc. required for proper completion of work.

Two coat of oil bound distemper on previously old distempered surface including supply of all materials, labours and T&P etc. required for proper completion of the work.

Providing and fixing first quality europian type white glazed earthan ware seat ISI market size 450mmx350mm approx as per approved sample (hind ware required design No. 183660 or equivelent make) including supply of all materials, labour, T&P etc. required for proper complete of the work.

Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc, required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules.

Providing, and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality 1.8.1. marked (Hindustan, Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when Rot included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured, (Steel shall be arranged by the contractor)

Supply and fixing of 32 mm. thick Shisham wood part panelled and part glazed door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)

Cleaning of septic tank including disposal of waste out side the UPPCL area as par direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.

Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granit, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:2:4 In lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.

Precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with, cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labor and T&P.

Providing and fixing of first quality white glazed earthan ware flat back front urinal basin size 465mmx355mmx265mm as per approved sample (Hindware or equivalent make) with necessary fittings, 32mm dia P.V.C. flush pipe with brass unions including cost of all materials, labour,T&P etc. required for proper completion of work.

Providing and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED Including supply of all materials, labour and T&P etc.complete.

Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap. applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work.

Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature, pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work.

Attending minor type of repair for full day by Engaging and supplying one suitable and experience welder with kits (with all consumable like welding rod etc.)for attending deffects of water supply pipe line cictern and fixiture with water supply defects within colony with all T&P etc. but excluding cost of material.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test."All above operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire-performance-as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/mK as per ASTM 518:1991; in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD: 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black), comprising of main-T runners of size 15x42 mm of length 3000 mm, cross T of size 15x12 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm S of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm cuter diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26,23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet

Providing barbed iron wire fencing including fixing in post after straightening it including labour and T&P etc. required for proper completion of the work but excluding supply of posts and wire. (labour rates only).

Dismantling existing barbed wire fencing, including making bundles and stacking etc.complete.(labour rates only).

Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG-2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter.

S/F 50x50mm, 8-gauge G.I. chain link fencing 1.8 M high including fixing to vertical posts, horizontal runners with 10mm dia. 40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.