Uttar Pradesh Jal Vidyut Nigam Limited Tender

Same as in item 6.18 above but in super structure for 230 mm thick wall.

First class brick work in 1:5 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work.

Add to item 6.01 to 6.06 above for extra labour in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work, thickness of wall not to be less than 1.5 brick.

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granit, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:2:4 in lintels or bends and sun shade of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.

Concrete with 4cm gauge I class brick ballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion.

Cement concrete with 4cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work.

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes riveting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less than 10 mm including supply of all material labour and T&P etc for proper completion of work.

Applying BIRLA PUTTY or equivalent putty on previously Birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothening and leveling of the surface as per requirement and direction of E/I including cost of all material, labour and T&P required for proper completion of work.

Two coat of distemper in which One priming coat and one coat oil bound distemper on new work including supply of all materials, labour and T&P etc. and every coat after the first coat. required for proper completion of the work.

White washing two coat including supply of all materials, labour and T&P etc. required for proper completion of the work.

Finishing walls with water proof cement paint of approved made like "Super Snowcem" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work.

S/F 15 mm dia brass bib cock of approved quality (200 gms) with all labour material & T&P etc. completion of work. (L&K or equi.)

Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work.

Attending minor type of repair for full day by engaging one carpenter for carrying simple type of repairing of all wood work including all wood work including all T&P etc. but excluding cost of material.

Providing and fixing first quality white glazed European type pattern W.C. Pan Hindustan, cera make. Size 580 mm. (Hindustan, Cera Make) without "P" trap including supply of all materials, labour and T&P etc. complete.

S/F of earthan ware wash hand basin 510x400mm Indian make of approved quality without any accessories.

Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.)

Providing and fixing CP BRASS SHOWER heavy Quality (225)

Supply and fixing PVC nahani Trap India make of heavy approved quality complete with cl grating, including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work but for 100mm trap.

Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts. locks, handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

supply of GI Hinges 100 mm size12 gauge thick

Supply of CP iron Ldrop16mm dia 300mm long with bolts and clamps.

CP IRON Handle 100mm long door handle

Providing and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials, labour and T&P etc. complete.

Providing and fixing false ceiling at all heights with integral densified Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Noncombustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanized iron section of 0.40 mm thick on Silhouette profile, rotary stitched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet.

Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour, wastage. and T&P etc. required for proper completion of the work.

Hiring of iron pipes welding machine with welder and other work.