Uttar Pradesh Housing And Development Board Tender

SITC of Delegate Unit Microphone: Frequency Response: 40Hz-16KHz; Sensitivity: -44 dB:2dB ; Length Of Gooseneck: 420mm; Supports Discussion & Video; Connectivity : Daisy Chain connection with Loop In Loop Out; Dimension: 130x55x105(mm) ; Installation Dimension: 105x40(mm)

SITC of Audio Controller : The main unit of the portable digital conference system can support 60 units of Chairman & Delegate microphone. ; It support 250 Microphones with extension power unit.; Equipped with four groups or 8p-DIN interface for system connecting.; Modes : Discuss mode, Free mode, FIFO mode (1-9),Limit mode (1-9) ; 9 Microphones can be on at a time. First In First Out ; The working mode is displayed on LCD screen. ; Look At Me – Speaker tracking compatible with camera and processor; Connection: 8PIN x 3 plugs for Microphone ; 8 PIN x1 socket for system connection; RCA : 4 x RCA Port; RJ 45 x 1; XLR Port x 1

SITC of Amplifier:Power Output 245W Max., 175W RMS at 10% THD, 110W RMS at 5% THD, Output Regulation 2 dB, no load to full load at 1kHz , Input Channels 5 X Mic. 0.65mV/4.7k Ohms , 2 X Aux 100mV/470k Ohms Frequency Response 50-15,000Hz ±3dB, Signal to Noise Ratio 60dB, Tone Controls Bass ±10dB at 100Hz, Treble±10dB at 10KHz, Outputs Line: 200mV/600 Ohms, 1V/1k Ohms, Speaker Output 4 Ohms, 8 Ohms & 100V, Digital Player MP3 Player with USB, SD Card & Bluetooth, Power Supply AC: 220-240V 50/60Hz , DC: 12V, Power Consumption : AC : 250VA DC : 4A Power Consumption AC : 250VA DC : 4A, Consist of USB Pen drive Port ,SD Card Plug and Play, Compatible with Radio & Bluetooth, EQ & Recording, 5 Channels Microphone Inputs, 2 Channels Aux Inputs, 1 Channel Line Output. 100V Constant Voltage Output and 4Ω\ 8 Ω \16 Ω Resistance Output.

SITC of Speaker: Should have Two-way speaker configuration , Power handling: 200W peak (50W RMS) or more, 5.25” woofer and ½” titanium-laminate tweeter or better; Frequency range (-10 dB): 80 Hz – 20kHz or better ; Frequency response (+/-3 dB): 100 Hz – 18kHz or better ; Power Capacity: 150W or more ; Sensitivity: 87 dB SPL, 1 W 1 m (3.3 ft) or better; Maximum SPL: 108 dB continuous, 114 dB peak or more; Directivity Factor (Q): 6.0 or better ;Directivity Index (DI): 7.8 dB or better ; Nominal Impedance: 8 ohms or better ; Crossover Frequency: 4.2 kHz or more ; Overload Protection LF Driver: 135mm (5.25 in) low frequency loudspeaker or better ; HF Driver: 19 mm (.75 in) polycarbonate dome tweeter or better ; Enclosure Material: Polypropylene Structural Foam Should have All-weather construction for the outdoors; Easy setup ; Input Connectors: Spring – loaded terminals

SITC of DSP : : It should be equipped with reference-quality mic preamps that should spec in at an incredible 0.0007% THD, the DSP should be excellent for live streaming, video conferencing or recording applications specially in PC/Laptop The DSP should includes 2 channels of reference-quality mic preamps, 2 direct outputs for recording, a stereo input channel, a dedicated media channel, Bluetooth wireless input and high quality digital effects. It should also have features like 48 volt phantom power, dual selectable control room outputs, built-in stereo compressor, an on-board selectable high impedance preamp equalized for guitar, 3-band EQ per channel with bypass, signal/clip indicators, and a stereo master LED meter bridge. The Bluetooth should allow seamless connection to smart devices. It should have direct outs on the mic channels allowing easy connection to most DAW interfaces for recording. The DSP shall stream the stereo mix directly to and from a PC via USB. It should also have a tablet cradle to hold a smart device like tablet on DSP, for convenient display and easy operation. It should have 2 combination XLR/1/4" low noise mic preamps, 3-band EQ on all channels, 2 channels of EQ, EQ bypass per channel, LED clip and signal present indication, 2 Channels of direct out, Stereo pan control per channel, Channel 3/4 stereo 1/4" or 3.5mm input channel, Channel 5/6 stereo 1/4", RCA, or Bluetooth input channel. It should have Dual selectable control room outputs- 1/4" main stereo outputs. Should have high quality master LED meter bridge, Built-in master compression, Studio quality headphone output, Should be equipped with Bluetooth wireless connectivity, Bluetooth 3.0 + EDR, A2DP, Stereo USB-B streaming audio in and out, 16-bit, up to 48kHz sample rates. Should have built-in Digital Effects, Should have exclusive on-board Hi Z guitar input and global 48V phantom power.