Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Oct 2024
Closing Date14 Nov 2024
Tender Amount₹ 1,04,00,000
Costs
EMD
₹ 2,10,000Document Cost
₹ 5,310Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPHDB_969668_1Tender No
2419/ENG-24/270 Dated 24.10.2024Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
20.45
1225
25051.25
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
451.13
225
101504.25
Providing and laying in position specified grade of reinforced cementconcrete, including the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Pinth band
14.23
8100
115263
Providing and laying in position specified grade of reinforced cementconcrete, including the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Pinth band
17.04
7000
119280
Providing and laying in position specified grade of reinforced cementconcrete, including the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) For Slab
61.08
8600
525288
Providing and laying in position specified grade of reinforced cementconcrete, including the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Lighter Beam
15.23
8800
134024
Providing and laying in position specified grade of reinforced cementconcrete, including the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) RCC Column
13.29
8250
109642.5
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
119.18
5400
643572
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
43.29
155
6709.95
M-150 brick work in 1:6 in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:4 cement : coarse sand)
144.41
5400
779814
M-150 brick work in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
1.21
5600
6776
P/F Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
83.76
8955
750105.14
15mm cement plaster on plinth of mix 1 cement :4 coarse sand.
77.43
205
15873.15
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
910.67
195
177580.65
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand.
890.81
170
151437.7
Making grooves 10 to 12 X 12mm and 8mm deep in plaster of the walls or in ceiling vertically or horizontally as required.
342.29
32
10953.28
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, Including cement slurry, but excluding the cost of nosing of steps etc. complete. (40 mm thick floor)
93.78
390
36574.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specifled by the approved make & colours) with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all! colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), Including grouting the Joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
318
1550
492900
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to 1.5. 15622, of approved make, in all colours & sharde, In skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), Jointing with grey cement slurry @3.3 kg/sqm Including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
33.3
1050
34965
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): 25 mm thick
92.66
1350
125091
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
24.68
1000
24680
Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey. Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1) Cement 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,
1.67
700
1169
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, In all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
31.98
700
22386
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red
9.6
4264
40943.71
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : (a) 35 mm thick Single leaf
33.5
1700
56950
(b) 35 mm thick Double leaf
2.52
2060
5191.2
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (a) Fabrication of hold fast for door, chaukhats and windows.
120
85
10200
Providing & fixing of door / windows grill.
1785.79
85
151792.15
Z-Section steel windows with Openable panels, excluding Glass panes.
1461.94
115
168123.1
Angle iron chaukhat (40x40x5)
240.45
90
21640.5
Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats
15
110
1650
(b) Window chaukhats
21
85
1785
(c) Ventilator chaukhats
1
60
60
Distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undercorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger J&N shalimar Asian paints after thoroughts brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved syntheritc material & sand papered smooth including cost of all materials.
1240.31
100
124031
Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm.
890.81
180
160345.8
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2131.12
75
159834
Providing stainless steel sliding bots 16mm dia with nuts and 250mm long.
19
391
7429
Providing stainless steel sliding bots 10mm dia and screw. (i) 250mm long
19
245
4655
(ii) 200mm long
19
221
4199
Providing stainless steel doors handle with screw 150mm long.
38
52
1976
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above
437.39
1180
516120.2
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3, Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping including.
177.26
75
13294.5
Same as item above but on new wood surface.
72.03
75
5402.25
Providing and fixing stainless steel (Grade 304) ralling made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, 1/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
150.8
350
52780
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes
58.21
884
51459.97
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved staal primor
6.12
5408
33096.96
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand
8.64
1120
9676.8
Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt.
28.49
145
4131.05
Filling of carted earth.
86.75
396
34353
Providing and laying in cement concrete 1:4:8 (1) cement 4 coarse sand :8 graded stone ballast 40mm nominal size) including supply of all materials, labour, T & P etc required for proper completion of the work & curing complete, including cost of form work, in foundation & floors
8.16
5550
45288
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
3.57
1225
4373.25
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, pipes & conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Partll 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows: (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/som
21.53
225
4844.25
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). Pinth band
2.38
8100
19278
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) Raft Footing
3.65
8600
31390
As in item no. 6 above but for Lighter Beam (Using 1:1.5:3 Mix concrete)
0.16
8600
1376
Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
16.66
5400
89964
Same as in item no. 9 above but in super- structure above plinth level up to floor two level ( up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.
14.39
5850
84181.5
Same as in item no. 10 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
2.39
5850
13981.5
Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any.
6.36
155
985.8
P/F TMT Bar Fe 500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor to level.
5.97
8955
53463.8
M-150 brick work in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
10.65
5850
62302.5
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finished even and smooth. (1) 1 cement: 6 coarse sand
26.28
195
5124.6
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement: 6 coarse sand
93.12
170
15830.4
Cement concrete flooring 1:2:4 (1 cement 12 coarse sand 4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
14.06
390
5483.4
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): 25 mm thick
3.88
1350
5238
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
3.07
1000
3070
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab upto 0.50 sqm)
1.69
4264
7207.8
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1) Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
15.65
700
10955
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
75.31
680
51210.8
Providing & fixing commercial quality ISI marked flush door shutters conforming IS: 2202 construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. Single leaf- (35mm thick)
8.4
1700
14280
Double leaf- (35mm thick)
3.78
2500
9450
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. (when not included in an over all rates) wrought to required from including supply of steel & its wastage including cost of bolts, nuts if required for & welding, grinding & making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.
31.2
85
2652
Providing & fixing of door / windows grill.
47.25
110
5197.5
Z-Section steel windows
47.25
110
5197.5
Angle iron chaukhat (40x40x5)
105.6
700
73920
Fixing of Door, windows / ventilators chaukhats in position. (a) Door Chaukhats
7
110
770
(c) Ventilator openings
5
85
425
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
48.99
100
4899
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
93.12
180
16761.6
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
142.11
75
10658.25
Providing stainless steel sliding bolts 16 mm dia with nuts and 250 mm long.
7
90
630
Providing stainless steel tower bolt with 10 mm dia and screw. 250 mm long
7
140
980
200 mm long
7
140
980
Providing stainless steel door handles with screws 150 mm long.
14
75
1050
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finised smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonany Coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T& P etc complete for proper completion of work.
21.4
1180
25252
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour T & P etc. required for proper completion of the work.
11.09
75
831.75
Same as item 29 above but on new wood surface.
24.36
77
1875.72
Fixing 4mm thick panes of glass with atul or equivalent I.S.I. marked quality putty, brads and springs complete.
1.89
884
1670.84
Construction of drain along with apron.
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
6.85
1120
7672
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
28.12
32
899.84
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
176.72
350
61852
Centering & shuttering including strutting, propping etc. and removal of form for all heights: (a) Suspended floors, roofs, landings, balconies and access platform.
28.24
169
4772.56
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
23.08
368
8493.44
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. a) Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
3
3750
11250
b) W.C. pan with ISI marked white solid plastic seat and lid
3
3700
11100
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm brass pillar taps, brass chain with rubber plug, 32mm brass waste of standard pattern including cutting & making good the walls wherever required. a) Flat back wash Basin size 630x450 mm with single 15mm brass pillar tap.
5
2000
10000
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.
5
1135
5675
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern
1
6050
6050
b) Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
1
9125
9125
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fitting and brackets, cutting and making good the wall wherever required: Size 600x450x200 mm
2
4100
8200
Providing and fixing lexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin)
5
65
325
40 mm dia (for sink and urinal)
6
75
450
Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe.
50
925
46250
b) 75mm dia centrifugally cast iron S & S pipe.
35
810
28350
Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. 100 mm
15
300
4500
75 mm
12
280
3360
Providing & fixing M. S. holder bat clamps of approved design to sand Cast iron/cast iron (spun) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). Including cost of cutting holes&making good the walls etc. 100 MM dia pipe
12
170
2040
75MM dia pipe
13
190
2470
Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls and floors. 100 mm linlet & 100 mm outlet
4
850
3400
100 mm linlet & 75 mm outlet
4
860
3440
Providing & fixing Sand Cast iron S & S coller. 100mm diameter
15
325
4875
75mm diameter
12
205
2460
Providing & fixing sand cast iron S & S bend of required degree with access door insertion rubber washer 3 mm thick, bolts & nuts complete. 100mm diameter
8
395
3160
75mm diameter
6
325
1950
Providing & fixing plain sand cast iron S & S Bend of required degree. 100mm diameter
8
330
2640
75mm diameter
6
245
1470
Providing & fixing heel rest sand cast iron S & S sanitary Bend. 100mm diameter
8
330
2640
Providing & fixing single equal plain sand cast iron S&S junction of required degree with necess door, Insertion rubber washer 3 mm thick bolts & nuts complete. 100x100x100 mm
4
430
1720
75x75x75 mm
4
340
1360
Providing & fixing of sand cast iron terminal guard. 100mm diameter
8
300
2400
75mm diameter
6
245
1470
Painting sand cast iron/centrifugally cast (spun) iron pipes & fittings with paint of any colour over a coat of primer of approved quality. (for new work). 100mm
9
57
514.62
75mm
12
43
521.88
Providing & fixing PTMT towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw 450mm. Long with total length of 495mm, width 78mm and effective height of 88mm
4
478
1914.68
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes. 110MM
70
262
18403
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall. 110MM
24
308
7399.44
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
247
2971.8
Providing & fixing G.1. pipes complete with G.l. fittings & clamps including cutting & making good the walls etc. 1) Exposed on wall. (internal work) a) 25mm dia nominal bore (medium duty)
80
380
30400
b) 15mm dia nominal bore
60
220
13200
(c) 20mm dia nominal bore
45
260
11700
Painting G.1. pipes and fittings with synthetle enamel white paint over a ready mixed priming coat, both of approved quality. a) 25mm dia nominal bore.
80
25
2000
c) 15mm dia nominal bore.
60
15
900
d) 20mm dia nominal bore.
45
20
900
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore
12
110
1320
Providing & fixing brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore
5
400
2000
Providing & fixing brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore
5
600
3000
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). a) 20 mm. Nominal bore
3
450
1350
Providing and fixing gun metal gate valve with wheel of approved quality. a) 25mm dia nominal bore
2
480
960
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capacity 500 litre
1200
8
9600
Providing and fixing brass stop cock of approved quality. a) 20 mm nominal bore
2
300
600
b)15 mm nominal bore
2
350
700
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm In depth including consolidating each deposited layer by ramming, watering, ete & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
75
145
10875
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement 1 flue sand) including testing of joints ete, complete. a) 150mm diameter
30
300
9000
b) 100mm diameter
45
200
9000
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 150mm diameter S.W. Pipe
30
830
24900
b) 100mm diameter S.W. Pipe
45
560
25200
Providing and fixing square mouth S.W. Gully trap grade 'A' comp. with C.1. grating brick masonry chamber with F.P.S. bricks of class designation 75 & water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg & frame to be not less than 2.70 Kg as per standard design. a) 150 x 100 mm. size P type
2
1900
3800
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt of cover 23 Kg & wt. of frame 15 Kg.
6
10200
61200
b) Extra for depth of man hole size 90x80 cm
0.5
5150
2575
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete.
79
610
48190
Same as item No.(1) but for fan and light duty exhaust fan.
36
671
24156
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.
28
327
9156
Supply and wiring of submain 2 number 6 sqmm. FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4.0 sqmm FR PVC insulated multistranded copper conductor. cable as earth contunity wire etc. complete in all respects.
210
204
42840
Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all respects. 4 X 10 sqmm
100
505
50500
Supply & wiring of submains with 2 nos. 2.5 sq.mm & with I no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer UC
230
121
27830
Supply fixing and concealing of 20mm dia 2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. (For Telephone)
85
62
5270
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
28
140
3920
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
4
195
780
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of mek
28
150
4200
Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. Category AAA
30
1650
49500
Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects. CAT: AAA
39
1190
46410
Supply & fixing of recess mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respects. Category AAA
2
1350
2700
Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
28
517
14476
Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies Leic and with double ball breaing sistem
28
1800
50400
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proner completion of work. 600x480x200 mm. size
4
650
2600
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc, including supply of all material, labour and T & P etc. required for proper completion of the work. a) 600x480x200 mm. size
4
1720
6880
Supply and fixing of flush/surface mounting distribution boards complete in all respects. a) a) 6 Way TPN (CAT-A)
2
3660
7320
b) 4 Way TPN (CAT-A)
2
3080
6160
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A/10 K.A.in existing MCB, DB complete with connections as required.6-32 amps. (CAT-A)
28
260
7280
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT-A)
28
25
700
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of eneincer-in-charge. S&F of 63 Amp. D.P. Isolator. (CAT-A)
2
595
1190
S/fixing of power plug with 150/250 V flush type switch and 3 Pin 15 A/250V Nush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cun washer.
10
340
3400
Supply and burying of 600mm x 600 mmx6mm G.1. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.L.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.L. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
2
5380
10760
Supplying & Laying of 25mmx3mm G.1. Strip for earthing purpose as required complete in all respects.
50
90
4500
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
100
210
21000
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size SINO 501/D 35 sqmm 3.5 core
150
422
63300
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth. 35 sqmm 3.5 core
10
178
1780
Supplying and fixing of Palm/pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 35 sqmm
20
31
620
Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frume fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC sunports The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. The minimum clearances between bus bars shall be as follows: Incoming: One (1) No 200Amp. TPN I NO. Outgoing: 100 Amps TPN -2No. OR outgoing as per site requirment
1
76700
76700
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. Telephone socket outlet
2
124
248.2
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit las required 2 Pair
85
31
2711.5
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required. 300mm sween.
4
2150
8600
Supply & fixing of fire extinguishers, ABC type 9.00 Kg capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
11100
44400
Supply & fixing of fire extinguishers, CO2 type 6.50 Kg capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
19900
79600
S/F of Fire Bucket, round bottom made of G. I. sheet 9-11 Ltr. capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in- Charge.
8
490
3920
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil (loam clay or sand) Including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer 1/c with in a lead of 50m. (A) In all kind of soil upto 1.5m depth
22.59
145
3275.55
(B) In all kind of soil upto 1.5m to 3.0m. Depth
22.59
170
3840.3
(C) In all kind of soil upto 3.0m to 4.5m. Depth
22.59
195
4405.05
(D) In all kind of soll upto 4.5 m to 6.0m. Depth
10.54
245
2582.3
Providing and laying in cement concrete 1:2:4 (1 cement 2 coarse sand 4 graded Stone aggregate 20 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
1.2
6500
7800
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
24.14
5600
135184
Reinforcement cement concrete work In RCC culvert slab with 1:1.5:3 (1 cement: 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) including centering and shuttering and reinforcement.
1.61
8600
13846
TMT Fe-500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.27
7371
9361.17
12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement: 3 Coarse sand)
46.16
236
10893.76
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
10
452
4523
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D.-10-Circular shape 500mm internal diameter
1
973
973.68
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments. tools, plants & machineries required for the job, all complete as per direction of Engineer -In-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
15
587
8815.35
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to 15: 12818, including hire & labour charges, fittings & accessories etc all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
15
670
10057.05
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
2.45
1253
3071.49
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, In required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
2.45
1277
3129.39
Supplying, illing, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, In required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer- Incharge.
2.45
1277
3129.39
Gravel packing in tubewell construction in accordance with IS: 4097, Including providing gravel fine/medium/ coarse, In required grading & sizes as per actual requirement, oll complete as por direction of Engineer-in-charge.
1
1681
1681.06
DESILTING CHAMBER Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil (loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer l/c with In a lead of 50m. In all kind of soil upto 1.5m depth
10.05
197
1979.85
In all kind of soil upto 1.5m to 3.0m. Depth
4.06
242
982.52
Providing and laying in cement concrete 1:2:4 (1 cement:2 coarse sand 4 graded Stone aggregate 20 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
1.04
6990
7269.6
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
3.52
6715
23636.8
Reinforcement cement concrete work in RCC culvert slab with 1:15:3 (1 cement: 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.38
8623
11899.74
TMT Fe-500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.09
7371
8034.41
15mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement: 3 Coarse sand)
17.36
236
4096.96
Providing and fixing in position precest RCC manhole cover and frame of required shape and approved quality. M.D.-10-Circular shape 500mm internal diameter
1
910
910
DRAINAGE NETWORK
Constructing brick masonary open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1) cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement: 4 coarse sand) with a floating coat of neat cement Inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: Drain 300 wide average. Depth 45 cm
130
3478
452220.6
Inside size 60x60 cm & 90 cm deep Including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
13
7437
96693.09
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 1.5m depth
28.22
145
4091.9
In all kind of soil upto 1.5m to 3.0m. Depth
25.93
190
4926.7
In all kind of soil upto 3.0m to 4.5m. Depth
6.91
235
1623.85
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement: 2 coarse sand: 4 gradded stone aggregae 20mm nominal size)
1.91
396
756.36
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement: 4 coarse sand)
13.6
5600
76160
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement: 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) including centering and shuttering and reinforcement.
1.52
8600
13072
TMT Fe-500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.19
8955
10656.94
12mm plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)
60.95
200
12190
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6 gradded aggregate of nominal size 20mm) as per standard design with 20x20mm sq bars.
12
395
4740
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
630
1260
Providing & fixing 75mm dia vent pipes.
1
810
810
Providing & fixing of 75mm dia cast iron terminal guard.
1
245
245
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm Internal diameter
2
575
1150
M.D. -2.5- Circular shape 450mm internal diameter
2
575
1150
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
2
18000
36000
Centering and shuttering including strutting, propping etc. and removal.
15.19
169
2567.11
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
90
587
52892.1
Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
50
670
33523.5
Supplying, assembling, lowering and fixing in vertical position in bore wellunplasticized PVC medium well screen (RMS) pipes with ribs, conformingto IS: 12818, including hire & labour charges, fittings & accessories etc.all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
30
670
20114.1
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge.
8.48
1253
10631.12
Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sandcontent (beyond permissible limit), with required capacity air compressor,running the compressor for required time till well is fully developed,measuring yield of well by “V” notch method or any other approved method,measuring static level & draw down etc. by step draw down method,collecting water samples & getting tested in approved laboratory, i/cdisinfection of tubewell, all complete, including hire & labour charges ofair compressor, tools & accessories etc., all as per requirement anddirection of Engineer-in-charge.
14
789
11046
Providing and fixing suitable size threaded mild steel cap or spot weldedplate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm nominal size dia
1
164
164
Providing and fixing M.S. clamp of required dia to the top of casing/housingpipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm nominal size dia
1
1140
1140
Providing and fixing Bail plug/ Bottom plug of required dia to the bottomof pipe assembly of tubewell as per IS:2800 (part I). 100 mm nominal size dia
1
197
197
Supply of Submersible pump of make KSB 2.0 hp with control panel support wire etc.
1
25000
25000
Providing two coar PVC insulate submersible cable from pump panel to submersible
80
100
8000
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
60
600
36000
Prividing and fixing gun metel gate valve.
1
815
815
Supply of 100 mm dia Johnson screen
10
600
6000
Earth work in exacavation in t. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in alead of 50m.
18.13
197
3571.61
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form- work, in foundation and floors. (Side Wall & pathway)
36.53
6099
222796.47
Class M-150 brick work in 1:4 cement coarse sand (of 2.5 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
10.93
6715
73394.95
Interlocking Tiles-Rubber moulded refiective Zig-Zag 80mm Providing and laying of Interlocking Concrete Block Laying of Pavements having thickness 80mm including levelling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504
203.23
980
199165.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements