Uttar Pradesh Housing And Development Board Tender

Providing and laying cement concrete in 1:4:8 (1 cement 4 C.sand, 8 graded Stone aggregate 40mm nominal size ) and curing including supply of all material, labour T&P complete in foundation and floors.

Supply of 80mm thick Precast cement concerete Interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement smooth high gloss finish, skid resistant: manufactured from rubber moulds through vibro- compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa (M-40) confirming to IS: 15658-2006 including cost of material, labour, T & P etc required for proper completion of the work as directed by Engineer-in- charge.

Separation membrane of impermeable plastic sheeting 125micron thick

Providing and laying in position bitumien hot sealing compound on expeansion joints etc including making expention joint complete with respect as per direction of E/I

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.

Providing and laying of cement concrete in 1:1.5:3 (1 cement, 1.5 C.sand, 3, 20mm stone grit) including supply of all materials labour T&P etc.complete with form work as per direction by E/I.,

Disposal of extra earth/dismantled material within 10km distance.including loading , unloading & cartage as per direcion by E/I.

Dismantaling of old existing ramp/slabs i/e disposal of dismantaled material within 10km distance as per direction by E/I

Drain Earth work in excavation in ordinary soil (loam, day or sand) i/c lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavaled earth in to the trenches or into the side of foundation trenches or into the plinth and removal and disposal of surplus earth as per direction by E/I.

Providing and laying of cement concrete in 1:4:8 (1 cement 4 C.sand 8 40mm stone balast) including supply of all materials labour T&P etc.complete with form work as per direction by E/I.,

Class 150 Brick Work in 1:6 cement and coarse sand (FM 1.50 to 2.00) mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work & as per direction by E/I.

12mm thick plaster in 1:6 cement and coarse sand (F.M. 1.50 - 1.75 ) mortar, single coat on fair side of single or half brick wall for interior plastering including internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth No extra for mixing any additive with neat cement finished as per direction by E/I

Disposal of surplus earth including loading, unloading cartage and disposal in low lying area as directed by the Engineer-in-charge upto 10 Km within the scheme and from the site of work and also including leveling and dressing of surface in required level and slope.