Uttar Pradesh Housing And Development Board Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Feb 2025
Closing Date19 Mar 2025
Tender Amount₹ 3,65,00,000
Technical
Technical
Financial
Bid Capacity
... View More
To determine the bid capacity required, specific financial and technical requirements must be met. The bid capacity required includes:
- Financial capacity to meet the earnest money deposit, liquid assets, and turnover requirements.
- Technical capacity to execute the work, including experience and availability of necessary staff and equipment. Given the bid value of Rs 365.00 Lacs, the specific requirements are:
- Liquid Assets: 15% of Rs 365.00 Lacs = Rs 54.75 Lacs
- Turn Over: 30% of Rs 365.00 Lacs = Rs 109.50 Lacs Formulas for calculating the minimum requirements based on the bid value (BV) are:
1. Minimum Average Annual Financial Turnover: 0.3 * BV 2. Minimum Liquid Assets: 0.15 * BV
3. Minimum Experience Value: - For three similar works: 0.4 * BV - For two similar works: 0.5 * BV - For one similar work: 0.8 * BV The bid capacity required is at least 30% of the estimated cost of Rs. 365 Lacs, which is Rs. 109.50 Lacs. Thus, the bid capacity required to bid includes having a certain amount of liquid assets, a minimum turnover, and specific experience in construction works. The bid capacity can be summarized as follows:
1. Financial Turnover: Not less than Rs 109.50 Lacs.
2. Liquid Assets: Not less than 15% of the bid value, which is Rs 54.75 Lacs.
3. Experience: - Three similar works > 40% of the bid value (Rs 146.00 Lacs). - Two similar works > 50% of the bid value (Rs 182.50 Lacs). - One similar work > 80% of the bid value (Rs 292.00 Lacs).
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in construction of building and development work for the last seven years in the organized sector. The bidder should have completed similar works with the following values and percentages:
- Three similar completed works costing not less than 40% of the estimated cost, which is not less than Rs 146.00 Lacs.
- Two similar completed works costing not less than 50% of the estimated cost, which is not less than Rs 182.50 Lacs.
- One similar completed work costing not less than 80% of the estimated cost, which is not less than Rs 292.00 Lacs. These values represent the minimum amount of similar work experience required, with the percentages indicating the proportion of the bid amount that the previous work experience should represent. The experience requirements can also be summarized as:
(i) Single largest work: 80% of the bid amount, not less than Rs. 292.00 Lacs
(ii) Two works equal to: Each 50% of the bid amount, not less than Rs. 182.50 Lacs
(iii) Three works equal to: Each 40% of the bid amount, not less than Rs. 146.00 Lacs The estimated cost of the project is Rs 365.00 Lacs, and these percentages and values are derived from this estimated cost.
Costs
EMD
₹ 7,30,000Document Cost
₹ 7,080Tender Fee
Refer Documents
Summary
Construction Of Administrative Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_1009094_1Tender No
363/M-10/39 Dt 16.02.2025Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
114.62
5006
573881.71
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.
(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm
(3) Treatment of top surface of plinth filling 5 liters/sqm
(4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
843.1
227
192134.06
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
R.C.C. work upto plinth Lvl. (M-25)
263.53
6985
1841017.94
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum R.C.C. work Above plinth Lvl. (M-25)
363.59
7247
2635078.53
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
12.22
6935
84752.67
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
51.63
301
15590.71
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
51.63
107
5546.09
... More
Brick work with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
285.41
8386
2393516.76
... More
Half brick masonry with bricks of class designation 15 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
102.77
8866
911221.51
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
843.53
7926
6686645.44
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
51.63
302
15625.3
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Coarse sand (FM 1.50 to 2.00)
2800.96
290
813902.96
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
1624.02
252
410194.97
... More
Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.
916.66
73
67777.84
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate.
134.92
451
60908.28
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand (FM 1.50 to 2.00)), finished with a floating coat of neat cement.
18 mm thick
23.89
486
11625.11
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
473.64
1141
540797.42
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand (FM 1.50 to 2.00)), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
35.87
1192
42790.76
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)) :
25 mm thick
405.22
1431
580258.83
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand (FM 1.50 to 2.00)) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 25 mm thick
24.22
1730
41917.55
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand (FM 1.50 to 2.00)), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
62.51
805
50380.56
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand (FM 1.50 to 2.00)) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
231.67
931
215902.54
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60): 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
25 mm thick with 20 mm nominal size stone aggregate
128.48
282
36250.63
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Single leaf
87.26
2553
222799.21
... More
Same as above but for Double leaf
18.48
2631
48633.82
... More
Providing & fixing of hold fast made of mild steel Angle sections of size 35x35x5 for chaukhats of doors and windows.
302.4
95
29006.21
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to steel windows by welding
2901.3
161
467225.35
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 B and K12 etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand (FM 2.20 to 3.60): 6 graded stone aggregate 20 mm nominal size))
3626.63
96
349317
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand (FM 2.20 to 3.60) : 6 graded stone aggregate 20 mm nominal size))
1133.78
143
162663.42
... More
Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.
Door chaukhats
48
159
7659.36
... More
Window chaukhats
50
159
7978.5
... More
Ventilator chaukhats
8
159
1276.56
... More
Distempering (Two or more coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials.
(For Internal wall surface)
4369.88
136
596270.13
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
1624.02
125
204236.76
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5993.9
114
687500.33
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
48
199
9576.96
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm .
48
400
19200
... More
Providing & Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 250 mm x 10mm
48
300
14400
... More
Providing & fixing stainless steel handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
125 mm
96
150
14400
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
798.95
1238
989243.91
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
208.51
125
26159.66
... More
Same as item above but on new wood surface.
211.47
125
26531.03
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
4.0 mm thick glass panes
145.07
782
113520.18
... More
Construction of drain of size of size 150 x 150 mm along with apron including excavation, base concrete 1:4:8 in thickness of 7.5cm of and brick work in foundation 1:4 ( 1 cement : 4 coarse sand FM 1.50 to 2.00) and 25mm thick 1:2:4 cement concrete flooring in base and 12 mm thick plaster in 1:3 finished with neat cement.
142.76
824
117661.36
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
20.75
2000
41500
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
83.52
453
37878.83
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,
(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
312.12
567
177193.65
... More
Expansion joint 50mm
-
-
-
... More
Supply & Fixing of expansion joint system (Make Vinayak Techno Products) related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self-aligning / self-centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063.) Floor Joint of 50 MM Gap
17.88
3660
65440.8
... More
Supply & Fixing of expansion joint system (Make Vinayak Techno Products) related with wall joint (internal/external/Ceiling) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self-aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize lightweight aluminum profiles exhibiting minimal exposed Aluminum surfaces mechanically snap locking the multi cellular to facilitate movement. (Material shall confirm to ASTM 6063) Wall Joint of 50 MM Gap
35.76
3060
109425.6
... More
Supply & Fixing of expansion joint system (Make Vinayak Techno Products) Related with various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of Extruded aluminum base members with, self-aligning and self centering Arrangement support plates as per ASTM B221-02. The system shall be such That it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered selfcentering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).
Roof Joint of 50 mm Gap
17.88
3435
61417.8
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
291.06
288
83892.22
... More
Suspended floors, roofs, landings, balconies and access platform
1250
681
851912.5
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
786.68
706
555836.62
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1810.1
541
979716.63
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, vaccum dewatering, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
30.61
8157
249696.79
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Using grade ‘A’ sealing compound conforming to IS: 1834.
10mm Width & 50mm Depth
111.65
31
3549.35
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor Local Sand
59.06
1560
92190.3
... More
WATER SUPPLY AND SANITARY WORKS:-
SANITARY INSTALLATIONS
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
4974
9948.08
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
6
4788
28733.58
... More
Providing & fixing toilet paper holder
C.P. brass
6
590
3544.32
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
6
256
1539.78
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar tap
10
1636
16363.7
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
10
760
7605.8
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
6
170
1022.88
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
10
81
819.2
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
123
1237.4
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
1181
11818.4
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
4
796
3185.48
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink)
15 mm nominal bore
25
422
10552.75
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
19
71
1365.15
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
100 mm diameter
4
142
570.2
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
15 mm nominal dia
4
5101
20405.8
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore
2
492
985.56
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less
than 190 gms.
4
521
2084.32
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040 mm bowl depth 200 mm
2
5261
10523.74
... More
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe
32mm Dia
10
87
878.7
... More
40mm Dia
2
87
175.74
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15mm nominal bore
8
372
2980
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15mm nominal bore
5
587
2936.15
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
7
5864
41052.97
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
2.89
2978
8606.74
... More
Providing and fixing of Kent Elite Plus Water Purifier (RO+UV+UF+TDS Control) with flow rate (50L/hr) including all its accessories, complete in all respect including testing etc.
1
41370
41370
... More
Providing and fixing of Water Cooler 40/80 Litre (Voltas Make) including all its accessories, complete in all respect including testing etc.
1
42000
42000
... More
Providing and fixing of storage type (pressurised type) electric hot water heater copper sheet container, 25 mm thick insulation, stove enamelled M.S. jacket thermostatically controlled immersion heater with pilot neon lamp, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc. Capacity 25 Liters
2
12795
25590
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]
6
1500
9000
... More
WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
For Internal Toilet
-
-
-
... More
15 mm nominal outer dia Pipes
7
365
2561.16
... More
20 mm nominal outer dia Pipes
47.08
395
18603.19
... More
25 mm nominal outer dia Pipes
15.4
461
7099.86
... More
32 mm nominal outer dia Pipes
12.1
543
6575.02
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
... More
20 mm nominal bore
31.68
246
7800.57
... More
25 mm nominal bore
28.16
295
8311.14
... More
32 mm nominal bore
40.48
381
15434.21
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall
Terrace loop & Tank Filling Pipe
-
-
-
... More
32 mm nominal bore
22
490
10785.5
... More
40 mm nominal bore
22
596
13128.5
... More
50 mm nominal bore
93.5
770
72045.49
... More
Supply, fixing, testing and commissioning of following Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve - IP65CB - 230VAC, as per specifications:-
Lehry Make Automatic OHT Level Control System Consist of Following Items
1) LEHRY Make On-Off Type Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve with CI Body & SS Disc 2) Level Float Switch- 5M 3) Control Box (a) IP 65 Finishing(250 x 160 x 115)mm (b) LED Lamps: Tank FULL, Tank EMPTY, Power (c) Power supply toggle switch (d) Accepts 230V Single Phase power supply and provides 24VAC to float switch and 230VAC to valve coil. (e) Accepts NO/NC feedback from float switch.
-
-
-
... More
50mm
1
41225
41225
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
32mm diameter pipe
22
26
587.84
... More
40mm diameter pipe
22
31
689.7
... More
50mm diameter pipe
93.5
37
3505.32
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
2
670
1340.5
... More
50 to 80 mm nominal bore
8
1312
10497.84
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
For vertical pipe connection with terrace ringmain
-
-
-
... More
20 mm nominal bore
2
396
793.72
... More
25mm nominal bore
4
457
1829.84
... More
32mm nominal bore
4
506
2027.44
... More
40mm nominal bore
1
607
607.18
... More
50mm nominal bore
2
754
1509.18
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
8
4045
... More
ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm dia (for rain water)
225
277
62412.75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single Push Fit Coupler
110 mm dia
72
93
6752.88
... More
Single tee with door
110x110x110 mm
15
172
2581.5
... More
Plain bend 87.5 deg
110 mm dia
30
110
3315.3
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm dia
90
272
24561.9
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
15
219
3288.15
... More
INTERNAL DRAINAGE
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.
-
-
-
... More
90 mm
71.5
535
38252.5
... More
110 mm
168.01
610
102486.1
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
Bend without door (87.5°)
-
-
-
... More
110mm bend
10
260
2600
... More
Bend without door (45°)
-
-
-
... More
100mm
7
220
1540
... More
75mm
17
135
2295
... More
Y' Fitting without door
-
-
-
... More
100mm
7
415
2905
... More
75mm
17
230
3910
... More
Reduced 'Y' Fitting without door
100mm x 75mm
3
335
1005
... More
Single Tee without door
-
-
-
... More
110mm
7
365
2555
... More
75 mm
17
225
3825
... More
Single Tee with door
110mm
5
425
2125
... More
Reduced Tee with door
110mm x 75mm
6
370
2220
... More
Coupler
110mm
38.4
220
8448
... More
Clean Out Plug (COP)
-
-
-
... More
110mm
4
200
800
... More
75 mm
4
140
560
... More
Vent Cowl
110mm
8
90
720
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal
-
-
-
... More
50mm dia. Pipe
13.53
345
4667.85
... More
32mm dia. pipe
28.52
185
5276.2
... More
Elbow (90°)
-
-
-
... More
50mm
7
85
595
... More
32mm
10
40
400
... More
Elbow (45°)
-
-
-
... More
50mm
3
70
210
... More
32mm
6
45
270
... More
T fitting
-
-
-
... More
50mm
7
100
700
... More
32mm
10
45
450
... More
Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.
110mm x 75mm x 50mm/40mm (Toilet)
9
750
6750
... More
Providing, fixing, jointing and testing, of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.
110mm x 75mm
10
450
4500
... More
150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)
19
144
2750.44
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 15 (Class-150)
7
2009
14067.48
... More
Constructing brick masonry manhole with M-150 F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
8
9386
75090.8
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:
100 mm diameter
10.5
326
3423.53
... More
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.
All kind of soil
Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
69
258
17859.27
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100mm dia SW pipe
69
709
48927.21
... More
ELECTRICAL WORKS :-
INTERNAL WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group - C
227
1125
255579.3
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1358
178
242837.56
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
96
211
20261.76
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
780
256
199945.2
... More
2 X 6 sq. mm + 1 X 4 sq. mm earth wire
90
336
30322.8
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
90
771
69418.8
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
72
1047
75427.92
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
45
366
16474.05
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
26
449
11693.24
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
3
557
1673.88
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
41
283
11611.2
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
38
30
1166.6
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
129
66
8613.33
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
178
91
16256.74
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
41
162
6649.38
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
Upto 450 mm sweep
8
345
2762.96
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
8
158
1270.96
... More
FANS & LIGHT FIXTURES
Supply of LED 4ft 2x40W LED Tube light with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (including driver).Including connection with 1.5 sqmm FRLS PVC insulated copper conductor-MAKE c&s OR SIMILAR
25
5580
139500
... More
Supply of LED 4ft 40W LED Tube light with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (including driver).Including connection with 1.5 sqmm FRLS PVC insulated copper conductor
53
1590
84285.9
... More
Supply of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 21W (including driver).
58
558
32364
... More
Supply of Surface mounting round 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
8
684
5472
... More
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.
10
1012
10125
... More
Supply of LED Flood light 50 Watt , suitable for 24Hr Continuous Operation, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, CCT 3000K, complete in all respect,
6
4095
24570
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
18
100
1809.72
... More
Supplying of 9 Watt 4 Star LED Wall Light Blub complete in all respect.
18
210
3790.8
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
41
2095
85904.43
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.
300mm EXHAUST FAN
8
1600
12800
... More
DISTRIBUTION BOARD
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required
100 A,30KA,FPMCCB
2
5927
11854.52
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way Double door
1
3817
3817.45
... More
8 way Double door
4
4579
18318.24
... More
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.) 4 way (4 + 12), Double door
2
5765
11530.64
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
40 amps TP MCB
3
1743
5229.9
... More
63 amps TP MCB
2
1823
3646.8
... More
40 amps 4P MCB
3
2301
6903.9
... More
63 amps 4P MCB
2
2392
4784.4
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required.
25 amps
15
1556
23346.75
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
52
196
10216.96
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
32
9
319.36
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm ,CUBICAL PANEL BOARD ( MCCB TYPE ), MAIN L.T.PANEL(METER PANEL BOARD),Incoming :- one (1) No.400Amp. MCCB-1No.,Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.,One (1) No. (0-400A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.,One (1) Set of Phase Indication Lamp.,Bus Bar : One (1) No.200 A, TPN aluminimum bus bar of suitable length.,Outgoing :Phase indication lamps on each outgoing to be provided.,200 Amp. MCCB- 2 No., 100 Amp. MCCB- 1 No. 63 Amp. MCCB- 1 No OR outgoing as per site requirment(AS/SLD)
1
203851
203851
... More
EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
1
206
206.45
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
2
5734
11469.24
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
80
110
8841.6
... More
Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth
electrode including connection with G.I. thimble excavation and
re-filling as required.
20
220
4405.4
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
187
9363.5
... More
TELEPHONE & LAN SYSTEM
Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes:
2 Pair (4 core)
324
29
9447.84
... More
Providing, laying, connecting and testing of multi-core telephone armoured cable of conductor size 0.5mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable along wall or ceiling or through existing pipe.
10 Pair telephone cable
100
238
23850
... More
Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.
10 pair tag block
1
3115
3115.8
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia PVC conduit
100
98
9824
... More
25mm dia PVC conduit
250
111
27820
... More
32mm dia PVC conduit
100
141
14122
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required :
1 or 2 Module (75mmX75mm)
20
228
4574.2
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
-
-
-
... More
Telephone socket outlet
9
113
1022.31
... More
RJ-45 Data Socket outlet
11
563
6197.4
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
462
43
20212.5
... More
L.T. CABLES
Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Up to 35 sq.mm.
140
297
41582.8
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required :
Up to 35 sq.mm.
20
28
568
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required
Upto 35 sq. mm (clamped with 1mm thick saddle
20
42
844.2
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
20
34
690.8
... More
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 35 sq.mm
200
375
75060
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required :
3½ X 35 sq. mm (32mm)
4
283
1132.8
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
100 mm wide x 50 mm depth x 1.6 mm thickness.
10
513
5134.5
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
100 mm wide x 50 mm depth x 1.6 mm thickness.
2
889
1779.02
... More
FIRE FIGHTING WORKS
EXTERNAL WORK
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
100 mm dia.
50
3500
175000
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia.
1
5116
5116.8
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
100 mm dia.
1
8480
8480.67
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
2 way - 100 mm dia M.S. Pipe (Siamese Connection)
1
5174
5174.36
... More
INTERNAL FIRE FIGHTING WORKS (HYDRANT SYSTEM) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all
respects, as required: (Terrace Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
450 lpm at 35 m Head
1
66159
66159.24
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (for terrace booster pump)
1
1186
1186.53
... More
Providing & fixing flow switch in following sizes M.S.
pipe including connection etc as required.
100 mm dia
1
5766
5766.86
... More
Providing & fixing of start/stop push buttons including complete connection etc. as required. (for terrace booster pump)
1
850
850
... More
Providing and fixing in position the industrial type pressure
gauges with gun metal / brass valves complete as required (for terrace booster pump)
1
917
917.91
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia.
2
5116
10233.6
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
100 mm dia.
1
8480
8480.67
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
80 mm nominal bore
4.4
1446
6365.48
... More
100 mm nominal bore
44
1960
86280.48
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
2
5868
11736.34
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
40 m
2
9265
18531.62
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Gun metal
4
3992
15969.76
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Gun metal
2
1854
3708.48
... More
Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.
2
1640
3280
... More
Providing and fixing Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 1500 mm high x 1000 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “Fire Hose Cabinet” to be painted on the box.
(Approx. size of door: 1000mm Wide & 1500mm Height)
2
10800
21600
... More
Providing and fixing weather proof standard hose cabinet (900mm x 750 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5mm thick M.S. sheet having central opening glazed door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint and housing 2 Nos. canvas hose pipe and branch pipe as required. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The words “Fire Hose Cabinet” to be painted on the box.
1
7950
7950
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
2
1013
2027.68
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
14001
14001.94
... More
FIRE EXTINGUSHER
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
11980
23960
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
9100
18200
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
4
1000
4000
... More
FIRE FIGHTING PANEL
Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor)
1
20000
20000
... More
Supply, installation , testing & commissioning of XLPE insulated and PVC outer sheathed Aluminium conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 (with upto date amendments) of following sizes.
3 Core, X 6 sqmm.
30
276
8280
... More
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/ XLPE Al.conductor cables of 1.1 KV grade as required.
3 Core, X 6 sqmm.
4
76
304
... More
Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required.
2 x 2.5 sq.mm
30
145
4350
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width x 50mm depth x 1.6 mm thickness.
30
463
13906.8
... More
FIRE DETECTION AND ALARM SYSTEM
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
6 zone panel for fire alarm system
100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set.
Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No.
Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set.
Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
1
37390
37390.18
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
4
884
3539.64
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
4
211
847.28
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
2
2970
5941.84
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
2
363
727.58
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as
required.
2
427
854.98
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
15
2034
30518.85
... More
Supplying, installation, testing & commisssioning of ceiling/wall mounted loud speaker, 3/1.5 watt in ABS enclosure complete as required
1
1863
1863.45
... More
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
2
694
1389.14
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
750
132
99577.5
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
Speaker cable Four pair, 2 core, 1.5 sqmm.
750
121
90945
... More
Supplying and fixing 25 mm dia pvc flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
600
40
24408
... More
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300.
15
1250
18750
... More
BOUNDARY WALL
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
37.48
130
4889.64
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
3.03
5006
15170.66
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
13.22
6648
87894.89
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
3.03
8456
25623.32
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
R.C.C. work in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
3.47
7976
27679.91
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
28.17
7926
223303.03
... More
Brick work with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
5.42
8386
45453.42
... More
Half brick masonry with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
7.8
8866
69159.56
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
319.37
252
80666.47
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
319.37
125
40163.97
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
M.s. grill
780
90
70863
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
23.4
125
2935.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
27.3
288
7868.68
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
301.6
706
213098.5
... More
Lintels, beams, plinth beams, girders, buttresses and cantilevers.
91.43
541
49486.49
... More
C.C. ROAD
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
22.21
130
2897.52
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
20.35
5006
101888.79
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
6.53
6935
45289.27
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
140
160
22524.6
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, vaccum dewatering, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
18.48
8157
150748.01
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer’s specification in cement concrete.
245.65
40
10020.06
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Using grade ‘A’ sealing compound conforming to IS: 1834.
10mm Width & 50mm Depth
41.15
31
1308.16
... More
EXTERNAL SEWERAGE WORK :-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
50
258
12941.5
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm dia
20
511
10228.2
... More
250 mm dia
30
1106
33198.6
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
150mm diameter S.W. Pipe
20
867
17343.8
... More
250mm diameter S.W. Pipe
30
1169
35071.5
... More
Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg)
2
9386
18772.7
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)
1
19408
19408.04
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design
15
400
6005.25
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type
4
2059
8238.32
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250mm diameter
5
595
2978.4
... More
EXTERNAL ELECTRIFICATION WORKS
EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
1
5734
5734.62
... More
Earthing with Copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
1
9687
9687.16
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter
below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)
60
110
6631.2
... More
Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.
40
891
35672.4
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
187
3745.4
... More
EXTERNAL LIGHT FEEDER PILLAR
Supply installing testing & commissioning of out door type street light feeder pillar (Distribution Panel) compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below.
Incoming
63 Amp. 10 KA FP MCCB 1 No.
Suitable contractor and timer for down & dusk
100 Amp. TPN Alu. Bus bar
Outgoing
25 Amp. 10KA SP MCB 6 No.
1
32571
32571.86
... More
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect.
2
15581
31163.16
... More
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 60 watt. Confirming to IP 66 and above protection complete in all respect.LR02-671-XXX-57-G3 LED Street WIPRO
4
5703
22812.52
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
2
196
392.96
... More
UNDER GROUND CABLES
Supply of 3.5core and 4 core 1.1 KV LT power cable with solid/stranded compacted aluminium conductor, XLPE insulated colour coaded, Laid up, PVC inner shethed armoured with single layer of galvenized round wire or flat strip and over all ST-2 Grade PVC shethed conforming to IS 7098 (part-1) and ISI marked.
-
-
-
... More
4 X 10 sq. mm
80
121
9703.2
... More
4 X 16 sq. mm
60
258
15483.6
... More
3½ X 25 sq. mm
40
303
12128.8
... More
3½ X 70 sq. mm
45
699
31499.55
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required,but excluding sand cushioning and protective covering.
-
-
-
... More
Upto 35 sq. mm
50
153
7675
... More
Above 95 sq. mm and upto 185 sq. mm
60
179
10775.4
... More
STORM DRAIN
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
16.44
130
2144.76
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
2.48
5006
12416.91
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (F.M. 2.20 to 3.60) (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
0.26
5790
1505.58
... More
Cement plaster 1:3 (1 cement: 3 coarse sand (F.M. 1.50 to 2.00)) finished with a floating coat of neat cement.
12 mm cement plaster
56.57
330
18691.86
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
7.05
7110
50131.07
... More
U.G. TANK
EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
109.28
130
14256.67
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
-
-
-
... More
1.5 m TO 3.0 m
43.71
223
9776.18
... More
3.0 m TO 4.5 m
21.86
316
6926.56
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
2.91
5006
14569.85
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M30 grade with minimum cement content of 350 kg /cum
R.C.C. work upto plinth Lvl. (M-30)
30.25
7096
214682.44
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
37.68
7926
298688.61
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60): 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
17.5
451
7900.2
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm
56.95
347
19794.68
... More
For horizontal surface one coat @1.10 kg per sqm.
17.5
266
4666.55
... More
Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg
3
5567
16703.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
6.54
288
1885.02
... More
Suspended floors, roofs, landings, balconies and access platform
22.96
681
15647.93
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
126.1
619
78086.16
... More
TUBEWELL & BORING PUMP
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.
All Types of Soil
350 mm dia
90
568
51203.7
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
Rocky strata including Boulders
350 mm dia
60
674
40457.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
150 mm nominal size dia having minimum wall thickness 5.00 mm
100
1449
144960
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia
40
1889
75588.8
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Around Pipe (3.14*0.15*0.15*120.00)
10.6
1130
11984.47
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (3.14*3.50*3.50*0.30)
11.54
1488
17171.64
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
48
797
38280.48
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
150 mm dia
2
181
362.28
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
150 mm dia
4
1484
5936
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
150 mm dia
1
236
236.67
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore
80
765
61252
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 10 x 4 sq. mm
110
497
54706.3
... More
Supply of Submersibule pump with control panel, support wire etc. complete 5.0 H.P. (KSB / EQ.)
1
40341
40341
... More
SEPTIC TANK & SOAK PIT
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
From 0.00 mt to 1.50 mt
28.22
130
3681.58
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
-
-
-
... More
1.50mt to 3.0 mt
25.93
223
5799.5
... More
3.0 mt to 4.50 mt
6.91
316
2189.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (F.M. 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
2.77
5006
13868.89
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2.27
6648
15092.39
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
14.27
7110
101470.97
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1.78
7926
14110.02
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
60.95
302
18445.91
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60): 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
25 mm thick with 20 mm nominal size stone aggregate
10
282
2821.5
... More
Providing & fixing soil, waste and vent pipes.
75mm dia Sand cast iron S&S pipe as per IS: 1729
2
871
1743.42
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
18
400
7206.3
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 15 (Class-150)
1
19743
19743.5
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
10
681
6815.3
... More
RAIN WATER HARVESTING
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
-
-
-
... More
In all kind of soil upto 1.5m depth
14.92
130
1946.46
... More
In all kind of soil upto 1.5m to 3.0m. depth
14.92
223
3337.01
... More
In all kind of soil upto 3.0m to 4.5m. depth
14.92
316
4727.55
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60)) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
0.95
5006
4756.48
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
16.18
7110
115052.58
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.8
8456
6765.23
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
7.99
681
5445.42
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
0.63
7926
4994
... More
15mm cement plaster on rough side of mix 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
25.91
290
7528.93
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
11
400
4403.85
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
M.D. -10- Circular shape 500mm internal diameter
1
861
861.86
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
Pipes 80mm to 300mm diameter.
60
258
15529.8
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
100mm diameter
60
326
19563
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.
100mm diameter S.W. Pipe
60
709
42545.4
... More
Supply and stacking of graded stone aggregate of 45-90mm size
1.21
1542
1866.21
... More
Supply and stacking of stone chippings of 11.20mm size
1.82
1652
3006.82
... More
Supply and stacking of moorum at site
1.82
564
1027.68
... More
Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slabwith 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 finesand : 10 graded stone aggregate 40 mm nominal size), inside Plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarsesand), finished smooth with a floating coat of neat cement on wallsand bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep forsingle pipe line :
With common burnt clay F.P.S. (non modular) bricks of class designation 15 (Class-150)
8
5099
40794.88
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitablemethod prescribed in IS: 2800 (part I), including collecting samples fromdifferent strata, preparing and submitting strata chart/ bore log, includinghire & running charges of all equipments, tools, plants & machineriesrequired for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level.
300 mm dia
40
606
24275.6
... More
Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
150 mm nominal size dia
35
593
20771.8
... More
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
500
500
... More
Transport of boring tools other required equipments and installation at site.
1
750
750
... More
Furniture
Supply & Installation of Modular Furniture of approved make such as Godrej Interio, Durian, Neelkamal, Delite or equivalent as per specified below :-
-
-
-
... More
CABIN DESK
MAIN DESK- 1800(W) X 900D) X 750(H)mm
SIDE STORAGE- 900(W) X 450(D) X 750(H)mm MADE OF 25MM THICK PLPB WORKTOP WITH 2MM THICK PVC EDGE BANDING ,25MM THICK PLPB LAMINATE GABLE END AND 18MM THICK LAMINATE FRONT MODESTY SIDE STORAGE UNIT MADE UP OF 18MM THICK PLPB WITH 2MM THICK EDGE BANDING WITH 3 DRAWER AND SHUTTER WITH HANDLE AND LOCK.
4
36630
146520
... More
WORKSTATION
MAIN DESK- 1200(W) X 600D) X 750(H)mm MADE OF 25MM THICK PLPB WORKTOP WITH 2MM THICK PVC EDGE BANDING ,25MM THICK PLPB LAMINATE GABLE END AND 18MM THICK LAMINATE FRONT MODESTY PEDESTAL UNIT MADE UP OF 18MM THICK PLPB WITH 2MM THICK EDGE BANDING WITH 3 DRAWER WITH HANDLE AND LOCK.
23
12960
298080
... More
SOFA
Size in mm ‐ 1190(L) X 770(D) X 740(H)
2 SEATER
5
19476
97380
... More
SOFA
Size in mm ‐ 1190(L) X 770(D) X 740(H)
3 SEATER
2
23143
46287
... More
CENTRE TABLE
SIZE- 900(W) X 600D) X 450(H)mm
MADE OF GLASS TOP WITH SS FRAME UNDERSTRUCTURE
5
7245
36225
... More
CORNER TABLE
SIZE- 600(W) X 600D) X 450(H)mm
MADE OF GLASS TOP WITH SS FRAME UNDERSTRUCTURE
1
4950
4950
... More
MEETING TABLE
MADE OF 25MM THICK PLPB WORKTOP WITH 2MM THICK PVC EDGE BANDING, 25MM THICK PLPB LAMINATE GABLE END AND 18MM THICK LAMINATE FRONT MODESTY.
SIZE- 4800(W) X 1500(D) X 750(H)mm
1
31365
31365
... More
MEETING TABLE
MADE OF 25MM THICK PLPB WORKTOP WITH 2MM THICK PVC EDGE BANDING, 25MM THICK PLPB LAMINATE GABLE END AND 18MM THICK LAMINATE FRONT MODESTY.SIZE- 3000(W) X 1200(D) X 750(H)mm
1
19386
19386
... More
SLOTTED ANGLE RACK
POWDER COATED METAL ANGLE RACK. SIZE- 915(W) X 380(D) X 1830(H)mm
98
10215
1001070
... More
CABIN CHAIR
4
20655
82620
... More
CABIN VISITOR CHAIR
8
19926
159408
... More
CHAIR
Medium Back Chair, PP Arm, Gas Lift, Nylon Base, Mesh Back & Seat Fabric Tapestry WORKSTATION- 15+8=23 NOS
MEETING TABLE- 14+10=24 NOS
47
10413
489411
... More
BED
Single Bed, CRCA Sheet, CRCA Pipe Frame, Powder
Coated, PPCP Shoes 1985L X 910W X 600HT
21
12600
264600
... More
ALMIRAH
MADE UP OF CRCA SHEET METAL STORAGE SIZE- 915(W) X 380(D) X 2130(H)mm
23
16758
385434
... More
CAFÉ TABLE
Dining Table, S.S. Pipe Frame, Particle Board Post Forming Top, 25mm Thick, Size in mm ‐ 1650 X 800 X 750H
5
20655
103275
... More
CAFÉ CHAIR
Café Chair, Chrome Plated Pipe Frame, Wooden Seat
Back
20
3105
62100
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%