Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Feb 2025
Closing Date24 Feb 2025
Tender Amount₹ 2,10,00,000
Technical
Technical
Bid Capacity
... View More
The bid capacity required in the given tender includes specific values and formulas. The formulas provided are (&) 10 % & wire Below ax 9x 1.00 wfererct Mier 1.00 wfererdt HA (Below) at IT were sftreerit at até of gran aera Patent frat err aare faced wee ar after arftta & Free Beau F RS FAH AED A EMT. The values mentioned are (1) ater ard PRraret weiter wert AY gar arora a Pe Aerfer ara wT 40 weer FS A A, (2) a were Parerat wetter art At apa arorer ait fle fear aera wT 50 whee HHA 7 TI, and (3) war ante Pareto weir ard pe ara at fie fafaar area wT 80 wiaert FFA 7 A yeu ron a ed aaah fas a agar ovate eee Hferare err eg. These represent different bid capacity requirements for various aspects of the tender.
Costs
EMD
₹ 10,50,000Document Cost
₹ 7,080Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_1004093_1Tender No
66 dated 30.01.2025Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (15.7.4)
4.6
1627
7484.2
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR-15.25)
401.35
210
84283.5
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR-15.3)
2.16
2805
6058.8
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR-15.60)
66.96
209
13994.64
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil 0.30 m & Avobe (DSR-2.6.1)
245.17
140
34323.8
... More
Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation (DSR-4.1.8)
63.17
5381
339917.77
... More
1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from
natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-4.1.3)
50.17
6224
312258.08
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) (DSR-4.1.3)
401.35
325
130438.75
... More
Neat cement punning at cement concreat floor of badminton court including necessary labour T&P. material complete as per direction of E/I. (DSR-13.18)
401.35
63
25285.05
... More
Providing & fixing of 1mm thick bituminious sheet (tar felt) laying as per engineer in charge (MR)
401.35
723
290176.05
... More
Providing and laying in position specfied grade of reinforcement cement concrete, excluding the cost of centering,shuttering,finishing & reinforcement. All work up to plinth level. 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size) (DSR.-5.1.2)
67.08
7146
479353.68
... More
Reinforcement cement concrete work in beam,suspended floors,roof having slope up to 5% andings, balconies, shelves, chajjas, lintels, bands, plain windows sills,stair case & sprial stair case above plinth level excluding the cost of centering, shuttering, finishing & reinforcement with 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (DSR.-5.3)
81.97
8954
733959.38
... More
Centering,shuttering inluding strutting,proping etc. & removal of form for. Foundations, footings, bases of columns, etc. for mass concrete.(DSR.-5.9.1)
123.84
310
38390.4
... More
Suspended floors, roofs, landings, balconies and access platform. (DSR.-5.9.3)
33.2
732
24302.4
... More
Lintels, beams, plinth beams, girders, bressumers andcantilevers. (DSR.-5.9.5)
389.39
582
226624.98
... More
Columns, Pillars, Piers, Abutments, Posts and Struts. (DSR.-5.9.6)
378.4
759
287205.6
... More
Steel reinforcment for R.C.C work including strainghtening cutting bending placing in position & binding all complete up to plinth level. Thermo machanically treated bars of grade Fe-500D or more.(DSR-5.22.6)
210.95
8520
1797294
... More
Brick work with common burnt clay (non-modular) bricks of class-150 in foundation & plinth in. Cement morter 1:6 (1 cement:6 coarse sand) (DSR.-6.1.2)
47.9
5634
269868.6
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR.-2.35.3)
442.96
245
108525.2
... More
Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-(6.4.2+6.5))
210.94
8753
1846357.82
... More
Providing and fixing ISI marked Single leaf flush door shutters conforming to IS :2202 (Part |!) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR-9.21.2)
8.93
1716
15323.88
... More
12 mm cement plaster in single coat on plain side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. Upto 6 meter height (2.25FM) (DSR.-13.4.2)
632
270
170640
... More
Same as item no 21 but for 6 to 9 meter height
246
273
67158
... More
Same as item no 21 but for 9 to 11.6 meter height
238
276
65688
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. (2.25FM) (DSR.-13.5.2)
1121.02
302
339108.55
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 Size of Tile 600x600 mm (DSR.-11.46.2)
14.75
1282
18909.5
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.19.1 Light shade pigment using white cement (DSR.-11.19)
5.67
1212
6872.04
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (DSR-11.38)
37.13
1039
38578.07
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-8.31)
59.09
1002
59208.18
... More
Providing and laying integral cement based water proofing treatment (brick coba )including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (DSR-22.7.1) (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
33.2
1331
44189.2
... More
Supply and Installation of Badminton World Federation approved teak wooden Flooring grade - A (Sports Wooden Flooring) for Indoor Badminton court. (MR)
401.35
8950
3592082.5
... More
Supply and Installation of Badminton World Federation approved 5 mm thick mat for Badminton court (MR)
2
750000
1500000
... More
Supply & fixing of Badminton World Federation approved net & poles movable with wheels with complete acessories (MR)
2
78400
156800
... More
Structual steel work in M.S. chaukhat angle in required size in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR 10.1)
75
92
6900
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture (DSR-13.48.3)
3.15
135
425.25
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R-(13.48.2)
10.5
139
1459.5
... More
Finishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (D.S.R-13.45.1)
1121.02
176
197860.03
... More
Finishing walls with textured interior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (upto 6 meter height ) (D.S.R-13.45.1)
632
176
111232
... More
Same as item no 35 d but for 6 to 9 meter height
246
178
43788
... More
Same as item no 35 d but for 9 to 11.6 meter height
238
179
42602
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (D.S.R-13.80)
1121.02
123
137885.46
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(upto 6 meter height ) (D.S.R-13.80)
632
123
77736
... More
Same as item no 35 d but for 6 to 9 meter height
246
124
30504
... More
Same as item no 35 d but for 9 to 11.6 meter height
238
125
29750
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . (MR)
4
425
1700
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (MR)
(a) 200 mm x 10mm
4
310
1240
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm (MR)
8
175
1400
... More
Structural steel work TATA / Jindal make equivalent riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR-10.2)
10796
105
1138978
... More
Extra lifting charges of M.S. truss from G.F. to above 12.0 m height i/c put the structure at required place, labour necessary T&P and lifting machine / crane as per direction of engineer in charge. (MR)
10796
35
377860
... More
Providing and fixing of TATA / Jindal or equivalent precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR-12.50)
455.1
583
265550.85
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m DSR-(12.7.1)
40
813
32520
... More
Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptableVentilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. 9.147.D1.1 Using R1 series with frame (33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre). (D.S.R-9.147.d1.1)
9
10428
93852
... More
Providing and fixing of TATA / Jindal or equivalent puf panel false ceiling at height above 10 meter with complete acessories include labour T&P as per required engineer in charge (MR)
440.43
1250
550537.5
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR-21.18)
7.2
4207
30290.4
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings,runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (DSR-14.72)
975.8
259
252732.2
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (DSR-10.28)
79.2
610
48312
... More
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) required as per engineer in charge. (MR)
66
5500
363000
... More
Plumbing Work
Providing and fixing floor mounted, white vitreous china single piece double traps symphonic water closet of approved brand / make, shape, size pattern including integrated white vitreous china cistern of capacity 10 liter with dual flushing system, including all fittings and fixtures with seat covet, cistern fitting, nut, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per direction of E/I. (DSR 17.81)
2
14387
28774
... More
Supply and fixing of white colour counter top Cera /Jaguar / Kerovit make Hand Wash basin of required shape & size i.c fixing of C.P. waste jali, PVC waste pipe labour, T&P etc required for proper completion of the work as per direction of E/I. (MR)
2
12000
24000
... More
Supply and fixing of 15 mm size wash hand basin mixer Cera /Jaguar / Kerovit make of long leg fixed at counter as per direction of E/I. (MR)
2
10500
21000
... More
Supply and fixing of white colour Cera / Jaguar / Kerovit make Hand Wash basin as required size i.c C.P. waste jali, PVC waste pipe with 02 nos PVC connector pipe of 18" length, labour, T&P etc required for proper completion of the work as per direction of E/I. (MR)
1
3500
3500
... More
Supply and fixing of white colour Cera / Jaguar / Kerovit make Pedestal of required size i/c cartage, labour, T&P etc required for proper completion of the work. (MR)
1
2200
2200
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern. (DSR 17.4.3)
1
10599
10599
... More
Providing and laying polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all completes as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as per specified and as directed by the E/I. DSR 11.56.1
2
3539
7078
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
Proding and fixing CP brass 32 mm size Bottle trap of approved quality and make as per direction of E/I. DSR 17.22.A
3
817
2451
... More
Providing and fixing Rectangular shape mirror of required size superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing DSR 17.32.4
3
1653
4960.11
... More
Providing and fixing C.P. brass toilet paper holder DSR 17.34.1
2
634
1269.78
... More
Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P .Required for proper completion of the work. (MR)
75 mm O.D.
10
340
3400
... More
90 mm O.D.
10
450
4500
... More
110 mm O.D.
90
520
46800
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
75 / 90 mm DSR 12.43.1
20
292
5840
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5° 110 mm Shoe DSR 12.42.5.2
2
118
237.54
... More
Supply and fixing of UPVC S.W.R. Plain Tee confirming to IS- 14735 (MR)
90x90x90 mm size
2
340
680
... More
110x110x110 mm size
2
365
730
... More
Supply and fixing of UPVC S.W.R. Plain bend confirming to IS- 14735 (MR)
90 mm size
4
275
1100
... More
110 mm size
4
290
1160
... More
Supply and fixing of UPVC S.W.R. Door Y confirming to IS- 14735 (MR)
90 mm size
4
410
1640
... More
110 mm size
4
425
1700
... More
Supply and fixing of UPVC S.W.R. Cowel confirming to IS- 14735 (MR)
110 mm size
2
190
380
... More
Supply and fixing of UPVC S.W.R. Nahni trap size 100/75mm, 100/90mm confirming to IS - 14735 self cleannig design fixed in PCC 1:2:4 and supply and fixing of 125mm dia heavy duty CP brass jali. (MR)
6
750
4500
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc
15 mm nominal outer dia pipes (DSR 18.8.1)
40
393
15729.6
... More
20 mm nominal outer dia pipes (DSR 18.8.2)
35
424
14863.8
... More
25 mm nominal outer dia Pipes (DSR 18.8.3)
30
495
14865
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
25mm dia, nominal bore (DSR 18.17.1)
2
491
983.34
... More
32 mm dia, nominal bore(DSR 18.17.2)
2
544
1089.5
... More
40 mm dia, nominal bore (DSR 18.17.3)
2
652
1305.16
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore (DSR 18.13.1)
2
720
1440.72
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20 mm nominal bore (DSR 18.18.2)
2
365
730.7
... More
25 mm nominal bore (DSR 18.18.3)
2
366
733.16
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931
15mm nominal bore (DSR 18.49.1)
2
400
800.7
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15mm nominal bore (DSR 18.51.1)
2
631
1262.26
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.
15 mm nominal bore (DSR 18.53.1)
8
453
3629.36
... More
Psupply and fixing of health fauct including its chain and bracket fix as per direction of E/I. (MR)
2
1500
3000
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m :
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. (DSR 2.10.1.2)
50
278
13909
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 75/90/110 mm diameter pipe (DSR 19.2.1)
110
762
83820
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design :
(a) Inside size 900 x 800mm and 500mm deep including C.I. Cover frame.(DSR 19.7.1.1)
3
10088
30264.42
... More
Providing and placing on terrace (at all floor level) polyethylene water storage tank, IS: 12701 marked with cover and suitable locking arrangement and making mrcessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR - 18.48
1000
8
8690
... More
ELECTRIFICATION WORK
Point Wiring :
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 1.10
Group C (DSR 1.10.3)
95
1210
114956.65
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. DSR 1.11
28
1288
36076.32
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 1.12
25
275
6887.5
... More
Submains :
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (DSR 1.14.1)
150
192
28828.5
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DSR 1.14.2)
160
226
36294
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire (DSR 1.14.4)
160
362
57939.2
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire (DSR 1.14.9)
140
621
87073
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire (DSR 1.14.10)
180
828
149218.2
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. DSR 1.21
20 mm (DSR 1.21.1)
790
105
83408.2
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. DSR 1.24
5/6 A switch (DSR 1.24.1)
10
84
849.6
... More
3 pin 5/6 A socket outlet (DSR 1.24.4)
20
100
2012.6
... More
Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. DSR 1.24.6
2
122
244.16
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR 1.25
10
304
3043.7
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR 1.26
10
32
329.9
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. DSR 1.27
1 or 2 Module (75mmX75mm) DSR 1.27.1
2
245
491.62
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR 1.31
2
393
786.92
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR 1.32
2
483
966.74
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR 1.50
Upto 450 mm sweep DSR 1.50.1
8
371
2969.52
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes. DSR 1.51
8
170
1366
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair DSR 1.18.2
50
31
1567
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point) DSR 1.57
10
599
5996.8
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required. DSR 1.58
8
90
725.88
... More
MCB's & DB’s :
Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) DSR 2.4
4 way (4 + 12), Double door (DSR 2.4.1)
2
3374
6749.04
... More
6 way (4 + 18), Double door (DSR 2.4.2)
2
4102
8205.74
... More
8 way (4 + 24), Double door ( DSR 2.4.3)
4
4921
19687.84
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2.10 Single pole (DSR 2.10.1)
50
211
10558.5
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR 2.11
8
10
85.76
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. DSR 2.2
Supply and fixing of 40 Amp. FP MCB (10 KA) C Curve. CAT A
4
2275
9100
... More
Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A
3
2290
6870
... More
ELCB/RCCB Switches :
Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2.15
40 A (DSR 2.15.1)
4
2629
10518.68
... More
63 A (2.15.1)
3
2369
7107.03
... More
Earthing Work :
Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified. (MR)
2
11700
23400
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) DSR 5.9
60
118
7126.8
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. DSR 14.13
100 mm dia (DSR 14.13.3)
20
1487
29744.6
... More
L.T. Switch Panel Board :
Supply& Erracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle Type
Power Panel :
Incoming - DSR 20.1.2
200 Amp MCCB - 1 No.
Outgoing - 40 Amp 4P MCCB - 4 Nos. 63 Amp 4P MCCB - 2 No.
63 Amp 4P MCCB - 1 No.
(Complete as per requirment directed by Project Manager.)
1
150031
150031.3
... More
Lighting Fixtures (Lights/Fans) :
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA. DSR 23.07
10
963
9635
... More
Supply & fixing of IP 20, Frount Mid Power SMD type LED Light Surface mounting round 15 to 18 Watt Cut out Min 150 mm, Height Min 40mm/ Led Down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA. DSR 23.3
4
1694
6776.48
... More
Supply & fixing of IP 20, Frount Mid Power SMD type LED Light Surface mounting round 15 to 18 Watt Cut out Min 150 mm, Height Min 40mm/ Led Down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA. DSR 23.04
4
3341
13366
... More
Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. (MR)
1
2550
2550
... More
Armoured Cables (Cable/Gland/Lug) :
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size. DSR 20a.1
size 6 sq mm x 2 core (DSR 20a.1.1)
25
412
10311.5
... More
size 70 sq mm x 3-1/2core (DSR 20a.13)
200
842
168428
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. DSR 9.1
2 X 6 sq. mm (19mm) (DSR 9.1.21)
2
197
395.94
... More
3½ X 70 sq. mm (32mm) (DSR 9.1.23)
2
386
772.08
... More
Non-Schedule Items
Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. (MR)
8
225
1800
... More
Supply & fixing of 600mm sweep wall mounted (Heavy Duty) fan complete with Steel Blade & Pull Cord (Adjustable upward and downward tilt mechanism /motor /capacitor etc.) Oscillation degree - 45, Power consumption : 220 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 1350 RPM. Complete in all respect. (MR)
8
4506
36048
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 100 to 120 Watt. Confirming to IP 65 Protection complete in all respects. CAT AAA (MR)
6
8924
53549.28
... More
Supply and fixing of LED high bay light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 60 watt to 72 Watt. Confirming to IP65/66 protection having Company LOCO Engraved complete in all respect . (MR)
2
14500
29000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%