Uttar Pradesh Housing And Development Board Tender

Supply and jointing of Indoor/outdoor Type 33 KV jointing kit (Heat Sink) per XLPE cable including cost of all material, Labour and T & P for proper completion of work as per direction of E/I. Make:- Raychem/3M/ Densons/as per direction of E/I.

120 Sqmm3core Indoor Type

120 Sqmm3core Outdoor Type

Supply & Fixing of G.I. Pipe of following size for cable duly clamped with supports by 2 Nos. with clamps of 50 x 6 mm M.S. flats bolts, Nuts and washer required for proper completion of work. Make:-TATA/SAIL/JINDAL/as per direction of E/I.

100 mm dia (B Class)

Supply of HDPE pipe upto PN-6 working pressure Rating material Grade PE-80 Nominal dia (OD) 140 mm 8.30 mm thickness complete in all respect as per relevants I.S. Technicals specification.

Drilling of Road Parallely & Road Crossing at a depth of 2 to 3 Mtr. as required & laying charges of cable & 140mm Dia HDPE Pipe complete with all material, labour, Drilling machine & required T&P etc. required for proper completion of work as per Direction of E/I.

Supply & Making of suitable earth of O/H line pole with 2.5 Mtr. Long 20 mm dia M.S. rod complete with 7/16 SWG G.S. wire in 2.00 Mtr. Long 15 mm dia G.I. Pipe (0.96 Kg/Mtr.) duly clamped on pole with 3 Nos 20 x 3 mm M.S. Flat clamp with bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work.

Supply & Fixing of danger board of size 200 x 250 x 1.6 mm of M.S. sheet fixed with clamp of 20 x 3 mm M.S. flat including bolts, nuts and washerduly painted completed with all material, labour and T&P etc. for proper completion of work.

Supply & Fixing of barbed wire (1.5kg) duly clamped with 2 No. clamps made of 20x3mm MM. at both ends on poles flate including bolts, required for nuts and T&P etc. required for proper completion of work.

Supply & Fixing of cable route marker made of 1:2:4 R.C.C. Block size 1000x400x100 mm grouted with 1:3:6 cement stone grit coarse sand 30cm below G.L. with painting numbering & marking etc. complete with all required material T&P etc. complete in all respects as per direction of E/I.

Supply, Installation, Testing & Commissioning of 33/.433KV Outdoor OCTC OIL type 400KVA Distribution Transformer Level-1 as per IS-1180 having Cable Box / Bus Duct Termination HV/LV side, Dyn-11, ONAN,. This specification covers design, engineering, manufacture, assembly, stage testing, inspection and testing before supply and delivery at site of oil immersed, naturally cooled 3 phase 33 kV/.433V distribution transformers for outdoor use. It is not the intent to specify completely herein all the details of the design and construction of equipment. However the equipment shall conform in all respects to high standards of engineering, design and workmanship and shall be capable of performing in continuous commercial operation, in a manner acceptable to the purchaser, who will interpret the meanings of drawings and specification and shall have the power to reject any work or material which, in his judgment is not in accordance herewith. The offered equipment shall be complete with all components necessary for their effective and trouble free operation. Such components shall be deemed to be within the scope of bidder’s supply irrespective of whether those are specifically brought out in this specification and / or the commercial order or not. The transformer and accessories shall be designed to facilitate operation, inspection, maintenance and repairs. The design shall incorporate every precaution and provision for the safety of equipment as well as staff engaged in operation and maintenance of equipment. All outdoor apparatus, including bushing insulators with their mountings, shall be designed so as to avoid any accumulation of water. Make:- Crompton/ Schneider/as per direction of E/I.

Supply, Installation, Testing & Commissioning of 33kV, 50Hz, 18.4 kA/1 Sec Indoor type VCB, 630A Cu bus bars having 1 Incomer and 2Nos Outgoing(3 PNB) at 40˚C ambient temperature and altitude 1000 meter. BIL: 33kV/70kVr/170kVp Control Voltage: 224VAC /24VDC 33 kV, 630A, 18.1kA/1 Sec Indoor type VCB, Horizontal isolation & Horizontal drawout type, 224VAC Motorised Mechanism,Single Trip and Single Close coils - 24VDC, Cu Busbars with PVC sleeving, 400A ,Color Coded Wiring ; 33000V CT-1.5 sq.mm and other - 2.5 sq.mm,Degree of protection - IP5X for enclosur IP-2X for control Cabinet Partition class - PM,Auxiliary Contacts (4NO+4NC),Paint Shade : RAL 7032 (Interior/Exterior), Powerpack (224VAC -24VDC),50/5A, Class 1/5P10, 15VA/15VA,Digital Ammeter with S/S, Class-1, 96sq.mm ,Multifunction Meter-Std, LED As per Scheme requirement, Emergency trip push button,Panel Space Heater with Thermostat & switch, Panel Illumination Lamp with Switch,3 Pin 15A socket + 15A switch No 1, 2nos OUTGOING CT ratio shall be 50/5A. Incomer should have protection of IDMT/Earth fault, Over voltage and under voltage, master trip etc and and outgoing have IDMT/Earth fault and Master trip protection. Make Crompton/ Schneider/as per direction of E/I.

Construction of plinth for Transformer size 2.0x2.50x1.0 Complete With all materials, labour and T & P required for proper completion of work as per specification drawing and direction of E/I.

Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing. as per UP PWD SOR-2018 S.No. 726 (D)

Supply and Burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing. as per UP PWD SOR-2018 S.No. 727 (D)

Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB (65 KA, 4 Pole Elect draw out, microprocessor release IPR2) and TPN MCCB's (Four Pole 36 KA with thermal magnetic release)Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/ digital ammeter voltmeter, selector switches for ammeter & voltmeter, instrument fuses, current transformer etc. The board shall have suitable capacity electrolytic alumininum busbars as per IS8623 instulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above willl be provided with amp meter, current transformers and selector switches etc. and instrument fuse. The Switch Board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming: 800 Amp./415 Volt ACB-01 No. Outgoing: 400 Amp. MCCB-01 No, 200 Amp. MCCB- 01 No., 100 Amp. MCCB-01 No., & 63 Amp.MCCB-01 No. as per PWD SOR 2018 S.I.No. 822 (D)

Supply & Laying of following Size of Al. Conductor PVC Insulated armoured served sheathed cable 1100 Volt grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S Clamps etc. of suitable size or as directed by the E/I. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps. as per PWD SOR 2018 S.No. 501( t) Make:-Havells/Polycab /Gloster /KEI/ Universal/ Finolex/as per direction of E/I.

400 Sqmm 3.5 core

Supply & Fabrication of 8 SWG G.I. Wire mesh Security fencing by providing vertical supports of 50 x 50 x 6mm long including cutting bending at top at a distance of 0.60 Mtr. Including welding, cutting and Bending at bottom at a distance of 0.15 Mtr. Drilling of 04 Nos. Holes of 6mm Dia on Top for Holding the Barbed Wire at a distance of 125 mm hole to hole and 7 Hole in vertical position of 10mm Dia at a distance of 280mm hole to hole for riveting the chain link mesh of size 2" x 1" and MS Flat 50 x 6mm & 25x3mm and fixing the vertical support in plumb including brick work in repair wall with supply of all material, labour, T&P etc. required for proper completion of the work as per MVVNL Specification

Construction of security Fencing plinth size (30 x 14M) of required size M-150 class Brick including plastering etc. and 4.5m x 3.0m size material, labour and T&P etc. required for proper completion of the work.

Construction of 6x10M size and 3.5M high room of 23 cm. thick wall in first class brick work in cement and fine sand mortar in ratio 1:6 with one rolling shutter size 3 x 3 m and one window size 2 x 0.8 M fitted with welded mesh and grill, cable trench size 1 x 1.20 m, fire bucket stand and internal electrification. It shall be plastered in the ratio 1:6 (1 cement, 4 core sand) on the walls outside and inside and ceiling Room will be white washed and colour washed and door and window duly painted including all materials, labour and T & P required for proper completion of work. The work shall be carried out as per U.P.P.W.D. specification and direction of E/I.

Line Shifting Work (33 KV Line)

Supply & Erection of 33 KV section Double Pole Structure (Riser) 11 Mtr. Long SP-55 Type S.T. Pole (Bottom Portion Galvanised) made of following types of supports duly grouted 1:4:8 (1cement,4 coarse sand and 8 brick ballast 40mm size) Plinthed plastered and painted in the same manner as already specified for respective supports with 02 Nos. MS channels of size 125x65mm , 01 No. 100x50mm and 65x65x6 mm angle iron bracing fixed with MS clamp of size 75 x10mm & 03 Nos. Pin Insulator etc. complete with all material and T&P etc. required for proper completion of work.Make:-Only Manufacturers whose GTP will be Approved in MVVNL

Supply of following size 33 KV H.T. cable standered compacted circular Al. conductor screen with extruded semi conducting compound, XLPE insulated in copper Tape, cores laid up to innersheath of PVC, Galvanised Steel Strip Armoured & overall sheathed cable confirming to IS 7098 (Part-2) 2011 with upto date Ammendments complete in all respect as per Direction of E/I. Make:-Havells/Polycab/Gloster/KEI/ Universal/ Finolex/as per direction of E/I.

300 Sqmm 3 core

Supply and jointing of 300 Sqmm 3 core outdoor Type 33 KV jointing kit (Heat Sink) per XLPE cable including cost of all material Labour and T & P as per proper completion of work as per direction of E/I. Make:- Raychem/3M/ Densons/as per direction of E/I.

Supply & Fixing of G.I. Pipe of following size for cable duly clamped with supports by 2 Nos. with clamps of 50 x 6 mm M.S. flats bolts, Nuts and washer required for proper completion of work. Make:-TATA/SAIL/JINDAL/as per direction of E/I.

100 mm dia (B Class)

Supply of HDPE pipe upto PN-6 working pressure Rating material Grade PE-80 Nominal dia (OD) 160 mm 9.50 mm thickness complete in all respect as per relevants I.S. Technicals specification.

Drilling of Road Parallely & Road Crossing at a depth of 2 to 3 Mtr. as required & laying charges of cable & 160mm Dia HDPE Pipe complete with all material, labour, Drilling machine & required T&P etc. required for proper completion of work as per Direction of E/I.

Supply & Making of suitable earth of O/H line pole with 2.5 Mtr. Long 20 mm dia M.S. rod complete with 7/16 SWG G.S. wire in 2.00 Mtr. Long 15 mm dia G.I. Pipe (0.96 Kg/Mtr.) duly clamped on pole with 3 No.s 20 x 3 mm M.S. Flat clamp with bolts nuts and washers complete with all material labour and T&P etc. required for proper completion of work.

Supply & Fixing of danger board of size 200 x 250 x 1.6 mm of M.S. sheet fixed with clamp of 20 x 3 mm M.S. flat including bolts, nuts and washerduly painted completed with all material, labour and T&P etc. for proper completion of work.

Supply & Fixing of barbed wire (1.5kg) duly clamped with 2 No. clamps made of 20x3mm MM. at both ends on poles flate including bolts, required for nuts and T&P etc. required for proper completion of work.

Supply & Fixing of cable route marker made of 1:2:4 R.C.C. Block size 1000x400x100 mm grouted with 1:3:6 cement stone grit coarse sand 30cm below G.L. with painting numbering & marking etc. complete with all required material T&P etc. complete in all respects as per direction of E/I.

Line Shifting Work (11 KV Line)

Supply & Erection of 11 KV section Double pole structure (Riser) made of following types of supports duly grouted in 1:4:8 cement concrete (1 cement, 4 coarse sand and 8 grit of 20mm nominal size) Plinthed, Plastered and painted in the same manner as already specified for respective supports with one nos. channels of size 100x50mm and 75x40mm M.S. channel and 2 Nos. bracing of angle iron size 65x65x6mm 3M length fixed with packing piece and bolt and nuts as required including cost of material, labour and T & P required for proper completion of work. Make:-Only Manufacturers whose GTP will be Approved in MVVNL

11 Mts. long 410 SP-55

Supply of following size 11 KV H.T. cable standered compacted circular Al. conductor screen with extruded semi conducting compound, XLPE insulated in copper Tape, cores laid up to innersheath of PVC, Galvanised Steel Strip Armoured & overall sheathed cable confirming to IS 7098 (Part-2) 2011 with upto date Ammendments complete in all respect as per Direction of E/I. Make:-Havells/Polycab/Gloster/KEI/ Universal/ Finolex/as per direction of E/I.

300 Sqmm 3 core

Supply and jointing of 300 Sqmm 3 core outdoor Type 11 KV jointing kit (Heat Sink) per XLPE cable including cost of all material Labour and T & P as per proper completion of work as per direction of E/I.Make:- Raychem/3M/ Densons/as per direction of E/I.

Supply & Fixing of G.I. Pipe of following size for cable duly clamped with supports by 2 Nos. with clamps of 50 x 6 mm M.S. flats bolts, Nuts and washer required for proper completion of work. Make:-TATA/SAIL/JINDAL/as per direction of E/I.

100 mm dia (B Class)

Supply of HDPE pipe upto PN-6 working pressure Rating material Grade PE-80 Nominal dia (OD) 160 mm 9.50 mm thickness complete in all respect as per relevants I.S. Technicals specification.

Drilling of Road Parallely & Road Crossing at a depth of 2 to 3 Mtr. as required & laying charges of cable & 160mm Dia HDPE Pipe complete with all material, labour, Drilling machine & required T&P etc. required for proper completion of work as per Direction of E/I.

Supply & Making of suitable earth of O/H line pole with 2.5 Mtr. Long 20 mm dia M.S. rod complete with 7/16 SWG G.S. wire in 2.00 Mtr. Long 15 mm dia G.I. Pipe (0.96 Kg/Mtr.) duly clamped on pole with 3 No.s 20 x 3 mm M.S. Flat clamp with bolts nuts and washers complete with all material labour and T&P etc. required for proper completion of work.

Supply & Fixing of danger board of size 200 x 250 x 1.6 mm of M.S. sheet fixed with clamp of 20 x 3 mm M.S. flat including bolts, nuts and washerduly painted completed with all material, labour and T&P etc. for proper completion of work.

Supply & Fixing of barbed wire (1.5kg) duly clamped with 2 No. clamps made of 20x3mm MM. at both ends on poles flate including bolts, required for nuts and T&P etc. required for proper completion of work.

Supply & Fixing of cable route marker made of 1:2:4 R.C.C. Block size 1000x400x100 mm grouted with 1:3:6 cement stone grit coarse sand 30cm below G.L. with painting numbering & marking etc. complete with all required material T&P etc. complete in all respects as per direction of E/I.