Uttar Pradesh Housing And Development Board Tender

RMU-NON-Extensible FBX-C /CCT2 (2 Nos. Isolators (C), 1 No. Vacuum Circuit Breaker - T2) with AL Busbar)-BIL 28/75kV C FUNCTION Consist of 2 No. of Load Break Switch. 1. Operation of LBS- Manual. 2. Cable Switch Rating- 12KV, 630A, 21KA/3 sec. 3. Cable Bushing Rating- 630A, 4. Cable Cover:- As per our standard, 5. Fixed type Capacitive voltage indication. 6. ON/OFF/EARTH Switch via MIMIC. 7. Bottom Cable Termination- Suitable upto 300sqmm, T2 FUNCTION Type:- 3 position Disconnector and Earthing switch equipped with separate drive unit. T2 equipped with over current time release for transformer protection. 1. Vacuum circuit breaker 12 kV, 630 A, 21 KA/3 sec. 2 Operation of breaker – Manual 3 Self Powered Electronic numerical protection relay providing over-current & earth fault protection - Schneider make DPX V5 4 Ring core protection current transformers. 5 Capacitive voltage indication fixed type. 6 ON, OFF, EARTH indication on the front mimic of the panel. 7 Cable box for termination of cable upto 300sqmm 8 Cable cover standard. 9 Emergency trip push button. 10 Shunt trip coil

RMU accessories:-

Operating Handle - 1 No.

Manometer for SF6 gas pressure indication.

Right Angled Cable Boots suitable for 1 Run x 3 C x 300 Sq mm

TRANSFORMER (Manufactured as per IS 1180 level-1), TYPE:- ONAN, Hermatically sealed corrugated tank 1. Ratio- 11 KV/433V, 2. Capacity:- 250 KVA, 3. Vector Group- DYn11, 4. Off Load Tappings +5% to -10% in steps of 2.5%, 5. Winding- Double Wound Copper, 6. Class of Insulation- A, 7. Ambient Temperature- 50 Deg C, 8. Temperature rise in oil over ambient- 40 Deg C 9. Temperature rise in winding over ambient- 45 Deg C 10. Losses at 50% loading - 1050 W (Max) 11. Losses at 100% loading - 3150 W (Max) 12. %Impedance- 4.5% (IS TOL)

Transformer Accessories

Oil Temperature Indicator

Winding Temperature Indicator

LT Busbar - Main Busbar are of Aluminium however Copper Flexible are provided between Transformer & LT Incomer Connection alongwith Main Busbar

Voltage Rating- 433V

Current Rating - 600 A

LT PANEL

Incomer

400A, MCCB, 4 Poles, Fixed Manual Type, 50 KA, MP based release for O/L ,S/C protection

On, OFF, TRIP lamps

R/Y/B indicating lamps

ENCLOSURE for PSS

Outdoor Type 2mm thick Galvanised Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP34 degree of protection for Transformer Compartment. The enclosure exterior shall be powder coated with PP based paint. HT & LT compartment will be provided with the door and pad locking arrangement. Transformer Compartment will be provided with Cover.The Compartment illumination lamp with door operated switch shall be provided for HT ,Transformer and LT compartment. Lifting(Bucket) Arrangement shall be provided with each PSS. EARTHING - Internal earthing connection by using 50 X 6 Aluminium Strips

S/I/T/C of 320 KVA Silent DG Set comprising of Cummins make engine model QSL9-G15 developing 399 BHP and 320 KVA, 415 V Stamford make alternator mounted on a common base, complete with Fuel tank, Batteries and leads, Residential Silencer, Acoustic Enclosure, AMF Panel Sutaible for 320 KVA DG Set, PCC foundation mixing ratio 1:2:4 Cement morang concrete sutaible size of DG Set, Control wiring, Complete as required with diesel for 4 hrs testing as required.

S/I/T/C of 1000 KVA 3 Phase Oil Coold Servo Stabilizer with inpur rang from 340 to 470 Volt, Output 415 Volt seven segment display. The AC servo motor have high torque, Low Inertia, Instant start -Stop reversible brush less construction using ball bearing for long maintenance free life, The motor is sutaible for 24 hours on site opretion, inbuilt low and high voltage single phase prevention alram, low and high voltage cut-off, over load cut-off.

Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. PWD SOR 2018 SI No. 506 (a)

95sq. mm 3 core

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required DSR 2022 SI No. 10.4.2

95-120 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : DSR 2022 SI No. 10.5

95-120 sq. mm

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 SI No. 501

240 sq. mm 3-1/2 core

400 sq. mm 3-1/2 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. PWD SOR 2018 SI No. 503

240 sq. mm 3-1/2 core

400 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PWD SOR 2018 SI No. 504

120 Sqmm

240 Sqmm

400 Sqmm

Supply and burring of Safe Earthing Electrode T-39 Zn- Zinc Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified PWD SOR 2018 SI No. 726 (D)

Supply and burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 Copper Strip will be extra). Make: As approved in U.P. P.W.D., & C.P.R.I. Certified PWD SOR 2018 SI No. 727 (D)

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 SI No. 717

Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect PWD SOR 2018 SI No. 718