Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Aug 2024
Closing Date7 Sep 2024
Tender Amount₹ 7,35,00,000
Costs
EMD
₹ 14,70,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPHDB_947901_1Bid Award Id
ViewTender No
889/AC-11/32 DATED 14.08.2024Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
205.98
65920
320.04
... More
Sand Filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work and i/c watering dressing etc.
243.78
243777
1000
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the eaternal perimer of binding expension joint, surrounding of pipe and conduit etc. complete.
1251.39
193965
155
... More
Cement concrete with 4cm gauge approved stone ballast, approved coarse sand, cement in proportion (8:4:1) i/c supply of all materials, labour and tools and plat etc required for proper completion of work.
577.25
2482175
4300
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1790
13931140
7782.76
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN FOUNDATION excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
276.6
1825560
6600
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN PLINTH BEAM excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
81.86
605764
7400
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN COLUMN excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
156.17
1171275
7500
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN ROOF SLAB excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
326.78
2352816
7200
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN ROOF SLAB BEAM excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
110.41
883280
8000
... More
RCC work with cement approve coarse sand & 1.5cm gauge approved stone ballast IN LINTAL BEAM excluding supply reinforcement and it's binding but including its fixing and binding the same with 24 B.M.G.I. wire & including necessary centering & shuttering etc. and also i/c supply of all material, labour and tool & plant etc required for proper completion of work. supply of binding wire to be supplied by the contractor free of cost.
19.07
133511
7000
... More
RCC work with cement approved coarse sand and 2 cm gauge approved stone bllast in th proportion specified 1:1.5:3 mix in all place excluding steel & steel binding & including shuttering and centering complete, In Raft & Footing
9.09
59104
6500
... More
RCC work with cement approved coarse sand and 2 cm gauge approved stone bllast in th proportion specified 1:1.5:3 mix in all place excluding steel & steel binding & including shuttering and centering complete, roof slab
14.99
113924
7600
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : Upto Plinth Beam in footing
5.04
33264
6600
... More
M-150 brick work in 1.6 cement coarse sand mix mortar in foundation and plinth i/c supply of all material, labour & tools etc complete
190.4
980560
5150
... More
M-150 brick work in 1.6 cement coarse sand mix mortar in super structure i/c supply of all material, labour & tools etc complete
927.04
5200694
5610
... More
M-150 brick work in 1.3 cement coarse sand mix mortar in foundation and plinth i/c supply of all material, labour & tools etc complete
15.7
80070
5100
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level. (cement mortar 1:4 (1 cement : 4 coarse sand)
144.52
852638
5900
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
206.62
15506
75.05
... More
EXPOSEED Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 1.50 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level
7.1
38056
5360.03
... More
EXPOSEED Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 1.50 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor V level
68.54
471100
6873.37
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 2.0 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
3262.6
395818
121.32
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
155.73
397868
2554.86
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
155.73
50191
322.3
... More
Supply of MS Grill of approved quality and drawing made of flat iron not bigger then 20x4mm size i/c supply of material, febrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction 0f E/I for proper completion of work
850.82
54452
64
... More
Supply of approved MS Z section windows and ventilators excluding cost of glass Panes but including supply of all material its fabrication nut bolt, hole fast for proper completion of work as per direction of E/I and also including cost of handle stay rod etc. and and one coat of red oxide paint complete in all respect.
30.6
2080
68
... More
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
5.04
14112
2800
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20c5mm size with top and bottam of iron 40x40x6mm with 38 dia steel pulleys with bolts nuts and locking arrangement stoppers handles complete including approved a priming coat of approved red lead paint.
9.44
32079
3400
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).B181
26
339637
13061.48
... More
Providing and fixing factory made uPVC mesh window/ doors comprising of lead free uPVC multi chambered frame, sash and mullion/coupler (where ever required) estended profiles having minimum wall thickness of 1.70 mm for series R1 and R2 profile and 2.10 mm for series R3 and R4 profiles conforming to EN: 12608 in shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazed beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of min. 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleave for fixing frame to finished wall as per IS 1367 : Part 1 to 14 plastic packers, plastic caps & necessary stainless steel screws etc. Profile of fram, sash & mullion (if required) shall be mitred cut & fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealed over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in charge. Section of steel reinforcement and cross sectiona of uPVC profiles to be as per design approved by Engineer-in-charge. Wire mesh / Glazing of plain/ toughen/ laminated/ double glass unit with/ without high performance coating as per design requirements and conforming to IS : 3548 & IS : 16231 shall be paid separately.
Note: Structural design proof checked from a goverment Engineering to be provided by the manufacture for: i) Sites with basic wind speed ˃ 45 m /sec as per IS 875 - Part 3 ii) Sites with sctructure height more than 20m for all wind speeds. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
281.25
2245140
7982.72
... More
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm
1416
365512
258.13
... More
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
118
18418
156.09
... More
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.
118
16328
138.38
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5mm thick panes
32.27
33214
1029.44
... More
Providing & fixing glass panes with beading in wooden doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
3.06
2497
816.3
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)
300x16 mm
68
10200
150
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)
250x10 mm
124
7688
62
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)
200x10 mm
146
7300
50
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)
150x10 mm
124
5208
42
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250X10MM
18
1631
90.63
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)
125 mm
154
4004
26
... More
Providing and fixing ISI marked IS: 1341 oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete (Copper oxidised as per IS 1378
125x125x27x2.80 mm
235
15850
67.45
... More
Providing and fixing aluminium 125mm handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
18
938
52.13
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
13
11038
849.09
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
99
57583
581.65
... More
Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
31.51
91215
2894.82
... More
Providing and laying of 8-10mm th. ivory or light shade vitrified floor tiles of 600x600mm size in flooring or skriting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with slurry & pigment grouting & Polishing complete i/c S/o all material, labour, T&P etc required for proper completion of work excluding base concrete.
1450.25
2030355
1400
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. In Toilet Floor
i) Ground Level to 4th Floor
111.66
105637
946.07
... More
Supply & Fixing 6mm thick approved china white/colour glazed tiles in flooring or dedo laid with 1:3 cement and approved coarse sand mortor finished and jointed with white cement slurry and pigment & polishing complete i/c supply of all materials, labours and T&P etc required for proper completion of work. In TOILET WALL (300x450)
506
556604
1100
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red
Area of slab upto 0.50 sqm
832.89
3226486
3873.85
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
526.72
1167711
2216.93
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
55.77
189246
3393.34
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
534.8
185440
346.75
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
144.3
205351
1423.09
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2354.71
1193486
506.85
... More
12mm th. Plaster on brick work min. thickness not less then 10mm with part 1 part of cement & 6 part of coarse sand on wall
3643.28
382544
105
... More
15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement:6 coarse sand)
5692.41
1597974
280.72
... More
15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand)
261.25
76672
293.48
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
2844.6
71115
25
... More
Providing & Laying "brick bat coba" 100 th. laid with M-150 class brick bat coba 7.50 cm th. with gap of 15mm to each other, over 20 mm th. base of cement mortar 1:4 cement & coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement coarse sand mortar finished smooth & top mashed false square 30x30cm and laid side wall parapet shall be monolythic plaster wall upto 30cm higher & juction and corner shall be rounded by brick ballsat cement & coarse sand and masnory coba with top finishing plaster mixing with acelic water proofing compound @ 2% by weight & i/c supply of all material, labour, T&P etc required for proper completion of works.
1314.5
985875
750
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
56.93
24349
427.67
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
12131.65
1395139
115
... More
Distempering one coat with oil bond distemper of approved brand and manufacture and required shade on undercoated wall surface to with even shade over and including a primer coat with cement primer of approved brand and manufacture such as British, Shalimar asian paint after throughly brushing the surface even sand prepared smooth i/c vost of all material.
6415.23
461896
72
... More
Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 ltr/10 sqm)
5822
465759
80
... More
Finishing walls with water proofing cement paint of approved make & quality an new work with two coats to give an even shade i/c supply of all materials, labour and tools and plat etc required for proper completion of work.
151.66
9554
63
... More
Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.
827.98
72862
88
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm
192.4
50810
264.09
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
94
24084
256.22
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee with door 110x110x110 mm
58
9864
170.08
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110mm dia
50
5463
109.27
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain)
50
4799
95.99
... More
Supply & filling of cinder in sunken portion of building i/c breaking into required sizes i/c supply of material, labour, T&P required for proper completion of work
26.61
33261
1250
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
416.77
235187
564.31
... More
Brick edgeing 7cm wide 11.4cm deep to plinth protection with bricks of class designation 75 i/c grouting with cement mortor 1 :4 mix .
494.41
22836
46.19
... More
P/Making of Apron drain of width 150mm and deep as per requirement of site but 200mm with neat cement finish with proper slope complete.
494.41
434090
878
... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with an universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self-centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall conform to ASTM 6063).
Floor Joint of 100 mm gap
26.97
129502
4801.71
... More
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063).
Wall Joint of 100 nm gap
62.4
249794
4003.12
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). Roof Joint of 100 mm gap
13.49
60554
4490.48
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
9
1835
203.92
... More
P/F of MS Fitting in window/ventilator
250 x 16 mm Sliding bolt
2
300
150
... More
P/F of MS Fitting in window/ventilator
250 x 10 mm Tower bolt
4
248
62
... More
P/F of MS Fitting in window/ventilator
200 x 10 mm Tower bolt
2
100
50
... More
P/F of MS Fitting in window/ventilator
150 x 10 mm Tower Bolt
14
588
42
... More
P/F of MS Fitting in window/ventilator
125 mm Handle
8
208
26
... More
P/F of MS Fitting in window/ventilator
125x125x27x2.80 mm Hinges
43
2900
67.45
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
9.75
2730
280
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar
8
3055
381.93
... More
Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries
required for the job. all complete as per direction of Engineer - in-charge, beyond 90 metre & up to 90 metre depth below around level (300MM DIA)
280
137236
490.13
... More
Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries
required for the job. all complete as per direction of Engineer - in-charge, beyond 90 metre & up to 90 metre depth below around level (400MM DIA)
540
340200
630
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge (100mm dia)
250
114492
457.97
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (100mm dia)
30
14403
480.12
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (200mm dia)
210
205590
979
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (200mm dia)
420
385980
919
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm. in recharge pit, in the required thickness, for all leads & lifts , all complete as per direction of Engineer -incharge
48.62
52418
1078.12
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit. over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
134.44
145687
1083.66
... More
Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer , for all leads & lifts, all complete as per direction of Engineer -in-charge .
48.62
52687
1083.66
... More
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
180.6
221164
1224.61
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-incharge.
1
1004
1004.4
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189. to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved
laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- incharge
420
318771
758.98
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to top of bore well housing/casing pipe, removal as per requirement, all complete for borewell of 150mm dia.
6
942
157
... More
Providing and fixing M.S. damp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (100mm dia)
1
1260
1260.42
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
14
2645
188.96
... More
Supply of 7.5HP Submersible pump of Crompton Make
1
85000
85000
... More
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : (100mm dia)
80
102098
1276.23
... More
Providing flanged joints to double flanged C.I./ D.I. 100 mm pipes and specials including testing of joints :
12
2828
235.73
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
1
3392
3392.48
... More
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.
Incoming 100 Amp MCCB -1 No & out going 32 Amp- 3 nos Cat B Pannel Cubicle type
1
65500
65500
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
3401.45
508278
149.43
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (2)With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25).
221.43
508818
2297.85
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, usingcement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine,providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
340.35
2819496
8284.11
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).
24.3
166519
6852.65
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
22101.2
57684
2.61
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Using grade 'A' sealing compound conforming to IS: 1834.
11050.6
71939
6.51
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
33.15
257993
7782.76
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
36
2016
56
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or 6 nos of G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
10
2513
251.37
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
1.13
99
88
... More
Mild steel or iron work in heavy sizes such as trusses builtup gate door frames records racks roof work, gates etc wrought to required from i/c drilling holes rivetting or welding where necessary and also i/c supply of steel, bolts nut wasrage etc, and their fixing required for proper completion of work
62.6
369337
5900
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
1711.25
29108
17.01
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
280.5
155943
555.95
... More
Supply and stacking of good earth at site
180
93067
517.04
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
3
15056
5018.95
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
29
92075
3175
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
29
56115
1935
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
8
45320
5665
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
8
23463
2932.98
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
15
78241
5216.1
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
29
7186
247.82
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
61
6648
108.99
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
45
33012
733.61
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe 32 mm dia
37
3196
86.39
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap
13
422
32.51
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
29
30015
1035
... More
Providing and fixing toilet paper holder : CP Brass
29
16344
563.61
... More
Providing & fixing of CI Cowel
2
283
141.9
... More
Providing and fixing soil, waste and vent pipes : 100mm dia
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
345.9
253081
731.66
... More
Providing and fixing PVC, waste and vent pipes : (150mm dia for rain water)
3
1775
591.98
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 100mm dia pipe
180
22500
125
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 3989
56
21280
380
... More
Providing and fixing plain bend of required degree. 100mm dia
Sand cast iron S&S as per IS : 3989
41
13530
330
... More
Providing and fixing heel rest sanitary bend 100mm dia
Sand cast iron S&S as per IS - 3989
18
6552
364.05
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm
Sand cast iron S&S as per IS - 3989
26
19478
749.17
... More
Providing and fixing sand cast iron S&S off sets as per IS: 3989 : 150 mm off sets With 100 mm dia pipe
26
12503
480.9
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 100mm dia
Sand cast iron S&S as per IS - 3989
26
15886
611
... More
Providing and fixing terminal guard : 100 mm
Sand cast iron S&S as per IS - 3989
24
8737
364.05
... More
Providing and fixing collar : 100mm Sand cast iron S&S as per IS - 3989
22
8009
364.05
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100mm
141
64167
455.09
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter (100mm)
117
12460
106.5
... More
Painting sand cast iron/centrifugally CI soil, waste vent pipe and fitting with two coat of enamel paint of any colour complete. i) 100 mm dia pipe
345
19861
57.57
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
11
1332
121.16
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
6
2982
497
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal dia Pipes
98.4
22632
230
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal dia Pipes
218.5
56810
260
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Exposed on wall
25 mm nominal dia Pipes
215.6
52822
245
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Exposed on wall
32 mm nominal dia Pipes
168
51240
305
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Exposed on wall
50 mm dia nominal bore
80
37200
465
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
74
46380
626.77
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
50 to 80 mm nominal bore
2
2506
1253.13
... More
Providing and fixing brass bib cock of approved quality
20 mm nominal bore
31
8416
271.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
32 mm dia nominal bore
5
2350
470.11
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
50 mm dia nominal bore
2
1490
745
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
20 mm nominal dia Pipes
8
3040
380
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
25 mm nominal dia Pipes
2
693
346.51
... More
Providing and fixing uplasticised PVC connection pipe with brass unions
45 cm length 15mm nominal bore
69
5175
75
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work
25mm diameter pipe
215.6
2479
11.5
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work
32mm diameter pipe
168
2100
12.5
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work
50mm diameter pipe
80
1480
18.5
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
50mm diameter pipe
111.6
16342
146.44
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
12000
96360
8.03
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm dia
34
15980
470
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore
63
28350
450
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
117
5976
51.08
... More
P/ Fixing of PMT Piller cock (Mixture) of approved quality
29
4340
149.68
... More
Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
19
5700
300.02
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
250 mm diameter S.W. pipe
280
342218
1222.21
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
13
25481
1960.09
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm diameter RCC pipe
280
188025
671.52
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm diameter RCC pipe
177
132178
746.77
... More
P/Laying of Non Pressure NP2 pipe class light duty RCC pipe with coller jointed with stiff mixture of cement in proportion of 1:2 cement and sand including testing of joint etc for 150 mm dia
18
6664
370.26
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
28
254800
9100
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (light duty) 1200x900 mm internal dimensions, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
24
444000
18500
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
169499
21187.42
... More
500mm dia C.I. Cover (midium duty) the weight of cover to be not less then 58 kg
2
5329
2664.88
... More
Extra for depth for manholes : Size 90x80 cm
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20.55
102750
5000
... More
Extra for depth for manholes : Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
32
201600
6300
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as equired, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
177
36285
205
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
32 mm dia
200
75382
376.91
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
32 mm dia
4
1953
488.35
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
6
50163
8360.63
... More
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
7.45
2574
345.5
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group -C
706
787451
1115.37
... More
Wiring for Twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
4750
1187.6
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1907
636938
334
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
6605
1170075
177.15
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
1525
318862
209.09
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
2 X 6.0 sqmm +1 X 6 sqmm earth wire
650
220207
338.78
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
900
515907
573.23
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
700
534877
764.11
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
75mm X 75mm X 60 mm deep
75
10150
135.34
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
100mm X 100mm X 60 mm deep
50
7945
158.9
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
150mm X 75mm X 60 mm deep
70
11496
164.23
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch
80
6264
78.31
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
15/16 amp switch
53
6286
118.61
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3 pin 5/6 amp socket outlet
80
7420
92.76
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6 pin 15/16 amp socket outlet
53
7938
149.78
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
80
29013
362.67
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
53
23613
445.54
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required
80
5292
66.15
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required
427
66876
156.62
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required
122
25601
209.85
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
upto 450mm sweep
16
6312
394.56
... More
BEE 5 star rated ceiling fan with brush les direct current (BLDC) Motor
122
253228
2075.64
... More
Supply and fixing of 24 Watt to 32 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.
164
598600
3650
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT- AAA
84
113400
1350
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA
177
210630
1190
... More
Supplying, fixing, connecting, testing and commissioning of Bulkhead type light fitting complete with , wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc. as required similar to Philips Cat. No. WT202W P LED 6S CW PSU S1 PC P3495 or equivalent
16
35200
2200
... More
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
300 mm 900 RPM HD Exhaust Fan.
16
48000
3000
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way (4+18), Double door
5
18948
3789.78
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required
1
2008
2008.74
... More
Supplying and fixing of following ways surface, Recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCBs & incommer) as required. (Note: Vertical Type MCB TPDB is normally used where 3 phase outlets as required).
6 Way (4+12), Double door
5
47250
9450
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
210
40874
194.64
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 A
6
4425
737.5
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A
6
4716
786.16
... More
aS&F of 125 Amp 4 pole MCCB (16 KA) Thermal Magnetic release
2
16620
8310
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.
Incoming
100 Amp MCCB -1 No
Outgoning 32 Amp. MCCB-3 Nos.
(ii)Cat. B. Pannel Cubicle Type
2
234400
117200
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.
Incoming
200 Amp MCCB -1 No
Outgoning 100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos
(ii)Cat. B. Pannel Cubicle Type
1
138070
138070
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.
Incoming : 100 Amp MCCB -1 No
Outgoning : 32 Amp. MCCB-3 Nos. (ii)Cat. B. Pannel Cubicle Type
Incoming : 200 Amp MCCB -1 No
1
92600
92600
... More
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
3.5 x 35 sqmm
400
180000
450
... More
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
3.5 x 50 sq.mm
340
167280
492
... More
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
70 sqmm x 3.5 core
225
137925
613
... More
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
120sqmm x 3.5 core
100
82400
824
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 50sq.mm
24
4272
178
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 70 sqmm
12
1812
151
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 120sqmm
12
3000
250
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 50 sq.mm
48
2304
48
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 70 sqmm
24
1920
80
... More
supply and laying of GI pipe with required socket under ground at the depth of 750 mm below complete in all respect.
100 mm dia
18
9059
503.33
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
150
22500
150
... More
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
20
200800
10040
... More
Supply & laying of aluminium conductor PVC insulated armored served sheathed cable 1100 Volts grade at depth of 750 mm below GL over a cushion of 75 mm. th. Sand all around & preotected with burnt bricks on sides and top. On surface the cable run shall be fixed on MS Clamps etc. of suitable size or as pirected by the E/I. The armouring of the cable shall be properly conneted with the earth conductor by clamps etc.
6 Sqmm 4 core for pole to pole
210
62370
297
... More
Supply & laying of aluminium conductor PVC insulated armored served sheathed cable 1100 Volts grade at depth of 750 mm below GL over a cushion of 75 mm. th. Sand all around & preotected with burnt bricks on sides and top. On surface the cable run shall be fixed on MS Clamps etc. of suitable size or as pirected by the E/I. The armouring of the cable shall be properly conneted with the earth conductor by clamps etc.
10 Sqmm 4 core for Fidder pillar to pole
950
310650
327
... More
Supply & laying of aluminium conductor PVC insulated armored served sheathed cable 1100 Volts grade at depth of 750 mm below GL over a cushion of 75 mm. th. Sand all around & preotected with burnt bricks on sides and top. On surface the cable run shall be fixed on MS Clamps etc. of suitable size or as pirected by the E/I. The armouring of the cable shall be properly conneted with the earth conductor by clamps etc.
35 Sqmm 3.5 core for Fidder Pillar
150
63300
422
... More
S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable i/c rubber ring etc complete in all respect. The armouring of cable shall be properly connected with earth as per direction of E/I.
6 Sqmm 4 core
112
8960
80
... More
S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable i/c rubber ring etc complete in all respect. The armouring of cable shall be properly connected with earth as per direction of E/I.
10 Sqmm 4 core
112
9744
87
... More
S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable i/c rubber ring etc complete in all respect. The armouring of cable shall be properly connected with earth as per direction of E/I.
35 Sqmm 3.5 core
8
1360
170
... More
S/F of plain or pin type copper tin plated cable socket (LUG) to the cable leads, insulating with tape and making connection etc. complete in all respect as per E/I.
6 Sqmm
112
1904
17
... More
S/F of plain or pin type copper tin plated cable socket (LUG) to the cable leads, insulating with tape and making connection etc. complete in all respect as per E/I.
10 Sqmm
112
2240
20
... More
S/F of plain or pin type copper tin plated cable socket (LUG) to the cable leads, insulating with tape and making connection etc. complete in all respect as per E/I.
35 Sqmm
8
248
31
... More
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.
28
427840
15280
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT AAA
28
294000
10500
... More
P/laying of GI Pipe for crossing of Raod with excavation & backfilling etc. complete. 80 mm dia nominal bore G.I Pipe
24
18261
760.88
... More
earth exacation for laying of Pipes, cables etc. not exceeding 80 mm dia
24
5077
211.56
... More
Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.
224
182400
814.29
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
224
196367
876.64
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
6
2162
360.39
... More
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
31
4619
149.02
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
6
2239
373.31
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per 1S:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
4 Zone
3
19412
6470.9
... More
Supplying & laying of 2x1.5 sgmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
1
131
131.53
... More
Supplying, installtion, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of foloowing, complete in all respects, as required as required.
Horizontal type, multistage, centrifugal, split casting pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming IS:1520 suitable HP squirell cage induction motor TEFC type suitable for operation on 415 Volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizental foot mountted type with Class 'F' installtion, confirming to IS-325'
MS febricated comman base plate, coupling, coupling guard, foundation bolts rtc as required, Suitable cement concrete foundation duly plastered and anti vibration pads.
900 lpm at 35 m head
1
77444
77444.32
... More
Control panel incoming:
250A,50kA 4 pole MCCB, Ics= 100% Icu rating Digital Voltmeter 0-500V with selector swith & CTs etc
Digital Ammeter 0-250A with selector swith & CTs etc
LED type RYB phase indicating Lamps, ON, OFF, trip indicating lamp
Set of Copper Bus bar 300A
1
186830
186830.75
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
32 mm dia
15
9705
647.02
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
80 mm dia
30
42995
1433.18
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
100 mm dia
189
367149
1942.59
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
150 mm dia
170
461947
2717.34
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel
10
46675
4667.54
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
80 mm dia
10
37878
3787.86
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia
5
25344
5068.9
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
150 mm dia
2
13624
6812.37
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, IS marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :
100mm dia
5
55658
11131.69
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :
100mm dia
2
16802
8401.42
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Stainless Steel (Grade 304)
10
33818
3381.85
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. (30M)
20
131973
6598.68
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:
Stainless Steel (Grade 304)
20
25272
1263.63
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:
2 way-100 mm dia M.S. Pipe
1
5126
5126
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
13871
13871.06
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required
100mm dia
1
34215
34215.43
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required
Hammer
6
3300
550
... More
Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.
The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work.
10.8
13737
1272
... More
Supply and fixing of factory fabricated M.S. box in existing sunk of size 600mm x 480mm x 200mm deep with Godrej type almirah, cover with handle etc. fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and D.P./T.P.N.; fixing arrangements and provision for compartment for loose wires openable housing on the top and hold fast etc. including supply of all material, labour, T&P etc. required for proper completion of the work.
4
6880
1720
... More
Supply and drawing following size of FRLS PVC insulated copper conductor single core cable in existing suface/recessed steel/PVC conduit as required. (2x1.5sqmm)
3028
161150
53.22
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
6 Kg capacity.
12
109200
9100
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work
Capacity - 4.5 Kg
12
143760
11980
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge
4
1960
490
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
4
10200
2550
... More
Providing and fixing signages printed on acrelic PVC sheet of 1.0 mm (+-10%) containinglumigen II as base chemical, covered under UV stablized coating and of appropriate size (Gio-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as diercted by Engineer-in-charge
2645
44965
17
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements