Uttar Pradesh Housing And Development Board Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Uttar Pradesh Housing And Development Board Tender

Works

Civil And Construction

Building Construction

Eprocure

Barabanki, Uttar Pradesh

Opening Date16 Nov 2023

Closing Date30 Nov 2023

Tender Amount₹ 11,00,00,000

Email

Download

Costs

EMD
₹ 22,00,000
Document Cost
₹ 11,800
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2023_UPHDB_862307_1
Bid Award Id
View
Tender No
1912/M-10/235 Dt 31.10.2023
Tender Authority
Uttar Pradesh Housing And Development Board View
Purchaser Address
-
Website
http://etender.up.nic.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-12.2 MBTendernotice_1.pdf

Tender Notice

BOQ-11.4 MBBOQ_1465112.xls

BoQ

Document-310.5 MBTechnicalBid.pdf

Technical Bid Document

Document-22.1 MBFinancialBid.pdf

Financial Bid Document

Document-148.9 kBTender_Detail_2023...Tender_Detail_2023_UPHDB_862307_1.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity66.77

Rate430666

Amount 6450

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All work up to plinth level.Concrete of M25 grade with minimum cement content of 400 kg /cum.

Quantity105.96

Rate741919

Amount 7001.88

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 400 kg /cum

Quantity287.87

Rate2409633

Amount 8370.56

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns, etc. for mass concrete

Quantity181.15

Rate46323

Amount 255.72

Walls (any thickness) including attached pilasters, buttresses plinth and string course.

Quantity24.64

Rate13699

Amount 555.99

Suspended floors, roofs, landings, balconies and access platform

Quantity935.41

Rate595425

Amount 636.54

Shelves (Cast in site)

Quantity56.79

Rate36149

Amount 636.54

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Quantity1206.54

Rate609507

Amount 505.17

Columns, Pillars, Piers, Abutments, Posts and Struts

Quantity616.48

Rate411716

Amount 667.85

Stairs, (excluding landings) except spiral-staircases

Quantity64.11

Rate35016

Amount 546.2

Weather shade, Chajjas, corbels etc., including edges

Quantity28.03

Rate18968

Amount 676.73

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 450 mm dia piles

Quantity1413

Rate4159773

Amount 2943.93

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge.Single pile upto 50 tonne Safe capacity

Quantity-

Rate-

Amount -

Initial test (Test Load 2.5 times the Safe capacity)

Quantity2

Rate85548

Amount 42774.4

Routine test (Test Load 1.5 times the Safe capacity)

Quantity3

Rate45996

Amount 15332.13

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity57.39

Rate295558

Amount 5150

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work

Quantity-

Rate-

Amount -

G.F.

Quantity58.02

Rate338314

Amount 5831

F.F.

Quantity66.3

Rate386595

Amount 5831

T.F./MUMTY

Quantity42.03

Rate247527

Amount 5889.31

Class-150 half brick work in 1:4 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.

Quantity-

Rate-

Amount -

G.F.

Quantity61.54

Rate382224

Amount 6211

F.F.

Quantity51.43

Rate319431

Amount 6211

T.F./MUMTY

Quantity0.39

Rate2446

Amount 6273.11

Providing and laying damp-proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 12.5 mm nominal size).

Quantity48.34

Rate16919

Amount 350

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Quantity48.34

Rate4777

Amount 98.84

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.

Quantity559.34

Rate106274

Amount 190

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity661.46

Rate4960950

Amount 7500

Providing and fixing SS sliding door bolts ISI marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm.

Quantity37

Rate14060

Amount 380

Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm.

Quantity228

Rate47880

Amount 210

Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm.

Quantity187

Rate8976

Amount 48

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Quantity26

Rate22144

Amount 851.7

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Quantity26

Rate766

Amount 29.48

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Quantity4

Rate148

Amount 37.24

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 75 mm

Quantity4

Rate1182

Amount 295.54

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Quantity32.76

Rate53937

Amount 1646.43

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity66.05

Rate194367

Amount 2942.73

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity66.05

Rate22015

Amount 333.32

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Quantity22.37

Rate64955

Amount 2903.7

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Quantity54.45

Rate31768

Amount 583.44

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but 40X40X5 MM ANGLE IRON

Quantity519.6

Rate40944

Amount 78.8

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but (Fabrication of Z-section Openable Steel windows, including necessary steel windows,including necessary steel fitting such as handles stay etc.

Quantity2649.23

Rate208759

Amount 78.8

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick

Quantity105.24

Rate82174

Amount 780.83

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing

Quantity1262.84

Rate99511

Amount 78.8

Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc.

Quantity440.4

Rate223903

Amount 508.41

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :35 mm thick shutters With ISI marked stainless steel butt hinges ofrequired size Second class teak wood

Quantity5.88

Rate22615

Amount 3846.25

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primerUsing M.S. angels 40x40x6 mm for diagonal braces

Quantity5.1

Rate20248

Amount 3970.27

Providing and laying "brick coba" 12 cm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and Coarse sand (FM 2.2-3.6) mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and Coarse sand (FM 1.5-2.00) mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and Coarse sand (FM 2.2-3.6) masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.

Quantity559.34

Rate587307

Amount 1050

12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall.

Quantity-

Rate-

Amount -

G.F.

Quantity822.45

Rate143928

Amount 175

F.F.

Quantity924.73

Rate161827

Amount 175

T.F./MUMTY

Quantity176.17

Rate31138

Amount 176.75

15 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall.

Quantity-

Rate-

Amount -

G.F.

Quantity638.36

Rate139641

Amount 218.75

F.F.

Quantity636.83

Rate139306

Amount 218.75

T.F./MUMTY

Quantity197.63

Rate43664

Amount 220.94

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 Coarse sand (FM 1.5-2.00) On plinth.

Quantity42.91

Rate9493

Amount 221.25

Engraving lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-charge including supply of all materials labour etc .required for proper completion of the work..

Quantity957.75

Rate51459

Amount 53.73

Making drip course in sun shade or FACIA as per direction ofengineer -in - charge including supply of all materials labour etc.required for proper completion ofthe work.

Quantity103.41

Rate5556

Amount 53.73

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand (FM 1.5-2.00), including pointing the joints with white cement and matching pigments etc., complete.

Quantity57.15

Rate54234

Amount 948.98

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Quantity280.62

Rate247812

Amount 883.09

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand (FM 1.5-2.00), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Quantity563.84

Rate663295

Amount 1176.39

Supply and fixing of KOTA STONE in flooring 25 mm thick and joint filled with 1:4 cement and Coarse sand (FM 2.2-3.6) with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:4 cement & Coarse sand(FM 1.5-2.00) mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labours, T&P etc. required for proper completion of work.

Quantity233.88

Rate331445

Amount 1417.16

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 Coarse sand (FM 1.5-2.00) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity10.75

Rate18197

Amount 1692.81

P/L in cement concrete 1: 2: 4 (1cement: 2 Coarse sand (FM 2.2-3.6) : 4 graded stone grit 20mm nominal size and curing complete including cost of form work for fixing of hold fasts including of supply of all materials labour T&P etc.required for proper completion of work. Strength should not be less than M-200.

Quantity19.46

Rate152761

Amount 7850

Cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 mm thick with 10-20 mm nominal size stone aggregate

Quantity104.94

Rate35679

Amount 340

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Quantity748.97

Rate49447

Amount 66.02

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all material

Quantity3708.91

Rate348637

Amount 94

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Quantity1146.47

Rate141015

Amount 123

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Quantity4855.39

Rate475828

Amount 98

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity239.94

Rate26633

Amount 111

Painting two coats over priming coat on wood surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity164.85

Rate18298

Amount 111

Apron drain of width 150mm and depth as per required of site but minimum 150 mm with Earth work in excavation.P.C.C. in 1 : 4 : 8 , Brick work in foundation IN 1:3,20 mm thick plaster in 1:3 and P/L 40mm thick C. C. in 1 :4 neat finish & required slope as per apporoved by E/I.

Quantity87.61

Rate142266

Amount 1623.86

Providing & laying of light cinder filling/ballast under floor of toilet /sunken roof supply of all materials labour T&P etc.required for proper completion of work.

Quantity5.9

Rate8850

Amount 1500

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Quantity-

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Quantity3

Rate11550

Amount 3850

White Vitreous European type w.c. pan with isi marked white solid plastic sheat and lid.

Quantity5

Rate19000

Amount 3800

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with a pair of 15 mm C.P. brass pillar tap.

Quantity9

Rate18900

Amount 2100

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe

Quantity-

Rate-

Amount -

a) 32mm dia

Quantity9

Rate585

Amount 65

b) 40mm dia

Quantity7

Rate525

Amount 75

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board of size 510x1040x200mm

Quantity1

Rate5715

Amount 5715

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :a) Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern

Quantity3

Rate14400

Amount 4800

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity9

Rate9900

Amount 1100

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Quantity10

Rate4500

Amount 450

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms

Quantity10

Rate1282

Amount 128.28

Providing & fixing 600x120x5 mm glass self with edges round off, supported on anodiesd aluminium angle framewith C.P. brass bracket and guard rail complete fixed with 40 mmlong screws, rawl plugs etc, complete.

Quantity9

Rate7434

Amount 826.09

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.a) 110mm diameter

Quantity180

Rate47793

Amount 265.52

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.a) 110mm

Quantity16

Rate3542

Amount 221.38

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)) and making good the wall etc. complete.(a) 110mm

Quantity65

Rate16705

Amount 257.01

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Quantity60

Rate2386

Amount 39.78

Providing and laying cement concrete 1:5:10(1 cement : 5 Coarse sand (FM 2.2-3.6) : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)100/75 mm diameter

Quantity100

Rate74362

Amount 743.62

Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.

Quantity-

Rate-

Amount -

90 mm O.D.

Quantity550

Rate209000

Amount 380

110 mm O.D.

Quantity300

Rate135000

Amount 450

Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.

Quantity30

Rate27300

Amount 910

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity22

Rate4180

Amount 190

Size 110 mm

Quantity22

Rate4510

Amount 205

Supply and fixing of UPVC S.W.R. Cowel confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity8

Rate600

Amount 75

Size 110 mm

Quantity8

Rate720

Amount 90

Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90x90x90 mm

Quantity18

Rate4320

Amount 240

Size 110x110x110 mm

Quantity18

Rate4770

Amount 265

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work) Exposed on wall

Quantity-

Rate-

Amount -

20mm dia nominal outer dia pipes

Quantity250

Rate62500

Amount 250

25mm dia nominal outer dia pipes

Quantity200

Rate65000

Amount 325

32mm dia nominal outer dia pipes

Quantity160

Rate62400

Amount 390

40mm dia nominal outer dia pipes

Quantity180

Rate81000

Amount 450

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20mm dia nominal outer dia pipes

Quantity250

Rate87500

Amount 350

25mm dia nominal outer dia pipes

Quantity225

Rate90000

Amount 400

32mm dia nominal outer dia pipes

Quantity200

Rate100000

Amount 500

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15mm nominal bore

Quantity18

Rate1800

Amount 100

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 .a) 15mm nominal bore

Quantity20

Rate7800

Amount 390

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore

Quantity8

Rate4320

Amount 540

Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Quantity25

Rate1352

Amount 54.1

Providing and fixing gun metal gate valve with wheel of approved quality.

Quantity-

Rate-

Amount -

25 mm dia nominal bore

Quantity6

Rate2760

Amount 460

32 mm dia nominal bore

Quantity2

Rate1040

Amount 520

40 mm dia nominal bore

Quantity8

Rate4600

Amount 575

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Quantity-

Rate-

Amount -

20 mm nominal bore

Quantity7

Rate3010

Amount 430

25 mm nominal bore

Quantity8

Rate4000

Amount 500

Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Quantity5000

Rate55000

Amount 11

Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity135

Rate82350

Amount 610

Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity4

Rate3164

Amount 791

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity42

Rate28182

Amount 671

Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash.

Quantity42

Rate13734

Amount 327

Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash.Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points.

Quantity1

Rate572

Amount 572

Addition for light / fan points with modular type switch in place of piono type switch.

Quantity170

Rate7480

Amount 44

Addition for two way points with modular type switch in place of piono type switch.

Quantity4

Rate660

Amount 165

Addition for plug points with modular type switch in place of piono type switch.

Quantity42

Rate3486

Amount 83

Addition for call bell points with modular type switch in place of piono type switch.

Quantity1

Rate80

Amount 80

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone)

Quantity1900

Rate117800

Amount 62

Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity1200

Rate145200

Amount 121

Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity900

Rate134100

Amount 149

Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 25mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FRLSH PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.

Quantity450

Rate91800

Amount 204

Supply and wiring of submain with 4 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 4 sq. mm FRLSH PVC insulated multistrand copper earth contunity wire drawn inside the conduit complete in all respect.

Quantity350

Rate126000

Amount 360

Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all required.

Quantity22

Rate36300

Amount 1650

Supply & fixing of Recess/Surface/Pendent mounting round 6 to 8 Watt LED down lighter having powder coated die cast Aluminium housing with heat sink, diffuser/reflecter, and driver set complete in all respect.

Quantity14

Rate10780

Amount 770

Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect.

Quantity-

Rate-

Amount -

1 X 22 W

Quantity76

Rate90440

Amount 1190

2 X 22 W

Quantity27

Rate48330

Amount 1790

Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.

Quantity1

Rate175

Amount 175

Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.

Quantity1

Rate140

Amount 140

Supply and burying earthing Electorde T-19 (Hot Dip Galvanized), Length 3000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified

Quantity2

Rate12900

Amount 6450

Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.

Quantity5

Rate20380

Amount 4076

Supplying and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.

Quantity90

Rate18000

Amount 200

Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.

Quantity80

Rate7200

Amount 90

Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.

Quantity90

Rate18900

Amount 210

Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 5 - 32 amps.Cat. A

Quantity47

Rate12220

Amount 260

Supply and fixing of 40 Amp. 4 Pole MCB (10KA)

Quantity3

Rate6825

Amount 2275

Supply and fixing of 63 Amp. 4 Pole MCB (10KA)

Quantity2

Rate4580

Amount 2290

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.600x480x200 mm. size

Quantity5

Rate3250

Amount 650

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size

Quantity5

Rate8600

Amount 1720

Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge.

Quantity5

Rate21850

Amount 4370

Supply & fixing of Crimping, solderless, copper tin electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.

Quantity188

Rate2820

Amount 15

Supply and fixing of single pole MCB blanking plate

Quantity55

Rate1375

Amount 25

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.

Quantity35

Rate21875

Amount 625

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.

Quantity5

Rate8100

Amount 1620

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Quantity33

Rate4620

Amount 140

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

Quantity7

Rate1365

Amount 195

Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.

Quantity7

Rate5670

Amount 810

Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work.

Quantity33

Rate4950

Amount 150

Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Quantity33

Rate17061

Amount 517

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sqmm 3.5 core

Quantity260

Rate127920

Amount 492

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire.50 sqmm 3.5 core

Quantity2

Rate356

Amount 178

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 50 Sq.mm

Quantity8

Rate384

Amount 48

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm ,CUBICAL PANEL BOARD ( MCCB TYPE ), MAIN L.T.PANEL(METER PANEL BOARD),Incoming :- one (1) No.200Amp. MCCB-1No.,Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.,One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.,One (1) Set of Phase Indication Lamp.,Bus Bar : One (1) No.200 A, TPN aluminimum bus bar of suitable length.,Outgoing :Phase indication lamps on each outgoing to be provided.,100 Amp. MCCB- 1 No., 63 Amp. MCCB- 3 No. OR outgoing as per site requirment(AS/SLD)

Quantity1

Rate138070

Amount 138070

Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.

Quantity1

Rate85

Amount 85

Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.

Quantity2

Rate5100

Amount 2550

Supply and fixing 200 AMP four pole Moulded case type on load change over switch with enclosure(also suitable for panel mounting with extra cost of bus bar) including the cost of labour, T & P , painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.-

Quantity1

Rate10440

Amount 10440

Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.2 Pair

Quantity450

Rate7474

Amount 16.61

Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Quantity300

Rate8220

Amount 27.4

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

Quantity-

Rate-

Amount -

Telephone socket outlet

Quantity4

Rate395

Amount 98.82

TV antenna socket outlet

Quantity2

Rate197

Amount 98.82

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75mm X 75 mm X 60mm Deep

Quantity6

Rate697

Amount 116.26

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

Quantity-

Rate-

Amount -

1 or 2 Module (75mm X 75 mm)

Quantity15

Rate3026

Amount 201.79

3 Module (100mm X 75 mm)

Quantity20

Rate4434

Amount 221.72

4 Module (125mm X 75 mm)

Quantity22

Rate5243

Amount 238.32

6 Module (200mm X 75 mm)

Quantity30

Rate8295

Amount 276.52

8 Module (255mm X 125 mm)

Quantity30

Rate9541

Amount 318.04

12 Module (200mm X 150 mm)

Quantity18

Rate6487

Amount 360.39

Extra for fixing the louvers / shutters complete with frame for exhaust fans of all sizes.

Quantity7

Rate976

Amount 139.51

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Quantity20

Rate531

Amount 26.57

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 coarse sand) including trenching (75 cm deep) and refilling etc as required.100 mm Dia

Quantity60

Rate26157

Amount 435.96

Supply & erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required-Make: Usha Cat No.SONATA MAX

Quantity33

Rate74250

Amount 2250

Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX300mm sweep.

Quantity7

Rate12600

Amount 1800

S/f of 10/20 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same

Quantity1

Rate7800

Amount 7800

FIRE FIGHTING-Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.6XLWDEOHM.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head(Terrace Pump)

Quantity1

Rate71582

Amount 71582.97

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia

Quantity50

Rate106083

Amount 2121.67

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal

Quantity1

Rate6349

Amount 6349.24

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100 mm dia

Quantity2

Rate11072

Amount 5536.28

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Quantity1

Rate1096

Amount 1096.96

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia

Quantity2

Rate18351

Amount 9175.92

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal

Quantity2

Rate8639

Amount 4319.74

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30m

Quantity1

Rate7203

Amount 7203.72

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun metal

Quantity1

Rate2006

Amount 2006.25

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way - 100 mm dia M.S. Pipe

Quantity1

Rate5598

Amount 5598.56

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Quantity1

Rate1283

Amount 1283.8

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.100 mm dia

Quantity1

Rate6239

Amount 6239.63

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Quantity1

Rate442

Amount 442.06

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Quantity10000

Rate110000

Amount 11

Providing and fixing weather proof standard hose cabinet (900mm x 750 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5mm thick M.S. sheet having central opening glazed door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint and housing 2 Nos. canvas hose pipe and branch pipe as required. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The words “Fire Hose Cabinet” to be painted on the box.

Quantity1

Rate7943

Amount 7943.65

Providing and fixing Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 1500 mm high x 1000 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “Fire Hose Cabinet” to be painted on the box.

Quantity1

Rate10832

Amount 10832.25

Providing and fixing air release valve.

Quantity1

Rate2067

Amount 2067.98

Supply & fixing of fire extinguishers, ABC type 6.00 Kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity6

Rate54600

Amount 9100

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity6

Rate71880

Amount 11980

Supplying, installation, testing and commissioning of Sector panel suitable for following zones,complete with visual indications for short circuit fault,open cricuit fault fire condition zone covered,complete with all connections,interconnections as required.4 Zone

Quantity2

Rate14724

Amount 7362.33

Supplying, installation, testing & commissioning of addressable manual call point complete as required

Quantity2

Rate6428

Amount 3214.48

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Quantity15

Rate33020

Amount 2201.39

Supplying, installation, testing & commisssioning of ceiling/wall mounted loud speaker, 3/1.5 watt in ABS enclosure complete as required

Quantity1

Rate2016

Amount 2016.21

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheathcomplete as required.

Quantity750

Rate107745

Amount 143.66

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.Speaker cable Four pair, 2 core, 1.5 sqmm.

Quantity750

Rate98400

Amount 131.2

Supplying and fixing 25 mm dia pvc flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Quantity600

Rate26406

Amount 44.01

Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300.

Quantity15

Rate57903

Amount 3860.22

TYPE-A Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity35.24

Rate4933

Amount 140

Filling by carted earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m.

Quantity367.73

Rate127234

Amount 346

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor Local Sand

Quantity34.38

Rate25785

Amount 750

Providing and laying Cement concrete 1:4:8 (1cement :4 C. sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity29.69

Rate191500

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in RCC raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity0.44

Rate4092

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity1.4

Rate13790

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres.

Quantity21.07

Rate188260

Amount 8935

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity10.11

Rate94528

Amount 9350

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity32.66

Rate282509

Amount 8650

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in lighter beams having spans upto 6 metres.

Quantity3.41

Rate30468

Amount 8935

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge.Single pile upto 50 tonne Safe capacity

Quantity-

Rate-

Amount -

Initial test (Test Load 2.5 times the Safe capacity)

Quantity1

Rate42774

Amount 42774.4

Routine test (Test Load 1.5 times the Safe capacity)

Quantity1

Rate15332

Amount 15332.13

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 450 mm dia piles

Quantity600

Rate1766358

Amount 2943.93

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity78.83

Rate405974

Amount 5150

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work

Quantity122.61

Rate714938

Amount 5831

Class-150 half brick work in 1:4 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.

Quantity3.52

Rate21862

Amount 6211

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Quantity41.01

Rate3877

Amount 94.54

Providing and laying damp-proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 12.5 mm nominal size).

Quantity41.01

Rate14353

Amount 350

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.

Quantity268.16

Rate50950

Amount 190

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity73.24

Rate549300

Amount 7500

Providing and fixing SS sliding door bolts ISI marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm.

Quantity21

Rate7980

Amount 380

Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm.

Quantity110

Rate23100

Amount 210

Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm.

Quantity106

Rate5088

Amount 48

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Quantity17

Rate501

Amount 29.48

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Quantity16

Rate13627

Amount 851.7

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primerUsing M.S. angels 40x40x6 mm for diagonal braces

Quantity2.1

Rate8337

Amount 3970.27

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Quantity9.06

Rate14916

Amount 1646.43

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity38.22

Rate112471

Amount 2942.73

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity6.3

Rate14542

Amount 2308.3

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Quantity44.52

Rate1657

Amount 37.24

Providing and fixing M.S. Tubular frames/shutters for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 Coarse sand (FM 2.2-3.6) : 6 graded stone aggregate 20 mm nominal size)

Quantity869.3

Rate105793

Amount 121.7

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but(for door chukhat)35X35X5 MM ANGLE IRON

Quantity55.28

Rate4356

Amount 78.8

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing

Quantity1040.73

Rate82009

Amount 78.8

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick

Quantity19.94

Rate15569

Amount 780.83

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading

Quantity19.94

Rate13451

Amount 674.62

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :35 mm thick shutters With ISI marked stainless steel butt hinges ofrequired size Second class teak wood

Quantity15.12

Rate58155

Amount 3846.25

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Quantity12.2

Rate4886

Amount 400.5

Providing and laying "brick coba" 12 cm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and Coarse sand (FM 2.2-3.6) mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and Coarse sand (FM 2.2-3.6) mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and Coarse sand (FM 2.2-3.6) masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.

Quantity229.19

Rate240649

Amount 1050

12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall.

Quantity667.53

Rate116817

Amount 175

15 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall.

Quantity615.68

Rate134680

Amount 218.75

12 mm thick plaster with cement mortar in consisting of 1:3 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. In ceiling

Quantity400.49

Rate84102

Amount 210

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 Coarse sand(FM 1.5-2.00) On plinth.

Quantity95.5

Rate21129

Amount 221.25

Engraving lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-charge including supply of all materials labour etc .required for proper completion of the work..

Quantity713.24

Rate38322

Amount 53.73

Making drip course in sun shade or FACIA as per direction ofengineer -in - charge including supply of all materials labour etc.required for proper completion ofthe work.

Quantity44.72

Rate2402

Amount 53.73

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand (FM 1.5-2.00), including pointing the joints with white cement and matching pigments etc., complete.

Quantity14.15

Rate13428

Amount 948.98

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand (FM 1.5-2.00) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Quantity72.17

Rate63732

Amount 883.09

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Quantity194.92

Rate229301

Amount 1176.39

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm

Quantity3.47

Rate8374

Amount 2413.52

Supply and fixing of KOTA STONE in flooring 25 mm thick and joint filled with 1:4 cement and Coarse sand (FM 2.2-3.6) with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:4 cement & Coarse sand (FM 2.2-3.6) mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labours, T&P etc. required for proper completion of work.

Quantity68.61

Rate97231

Amount 1417.16

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 Coarse sand (FM 1.5-2.00)) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity3.91

Rate6618

Amount 1692.81

Cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 mm thick with 10-20 mm nominal size stone aggregate

Quantity74.86

Rate25452

Amount 340

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Quantity198.95

Rate13134

Amount 66.02

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all material

Quantity1215.82

Rate114287

Amount 94

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Quantity563.38

Rate69295

Amount 123

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Quantity1779.2

Rate174361

Amount 98

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity145.01

Rate16096

Amount 111

Painting two coats over priming coat on wood surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity15.36

Rate1704

Amount 111

French spirit polishing : Two or more coats on new works including a coat of wood filler

Quantity7.56

Rate2312

Amount 305.84

Apron drain of width 150mm and depth as per required of site but minimum 150 mm with Earth work in excavation.P.C.C. in 1 : 4 : 8 , Brick work in foundation IN 1:3,20 mm thick plaster in 1:3 and P/L 40mm thick C. C. in 1 :4 neat finish & required slope as per apporoved by E/I.

Quantity79.58

Rate129226

Amount 1623.86

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.(A)White Vitreous Eoropion type w.c. pan with isi marked white solid plastic sheat and lid.

Quantity4

Rate15200

Amount 3800

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with a pair of 15 mm C.P. brass pillar tap.

Quantity4

Rate8400

Amount 2100

Providing and fixing flexible P.V.C. wasteSemi rigid pipe pipe for sink or wash basin including PVC waste fittings complete.

Quantity-

Rate-

Amount -

a) 32mm dia

Quantity4

Rate260

Amount 65

b) 40mm dia

Quantity2

Rate150

Amount 75

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Quantity2

Rate8030

Amount 4015

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity4

Rate4400

Amount 1100

Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge.(a) 15mm dia nominal dia.

Quantity4

Rate19600

Amount 4900

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet (a) 100 mm diameter

Quantity4

Rate520

Amount 130

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Quantity6

Rate2700

Amount 450

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms

Quantity6

Rate769

Amount 128.28

Providing & fixing 600x120x5 mm glass self with edges round off, supported on anodiesd aluminium angle framewith C.P. brass bracket and guard rail complete fixed with 40 mmlong screws, rawl plugs etc, complete.

Quantity4

Rate3304

Amount 826.09

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.(a) 110mm diameter

Quantity30

Rate7965

Amount 265.52

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(a) 110mm

Quantity4

Rate885

Amount 221.38

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 Coarse sand (FM 1.5-2.00) and making good the wall etc. complete.a) 110mm

Quantity8

Rate2056

Amount 257.01

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Quantity4

Rate159

Amount 39.78

Providing and laying cement concrete 1:5:10(1 cement : 5 Coarse sand (FM 2.2-3.6) : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)100/75 mm diameter

Quantity15

Rate11154

Amount 743.62

Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.

Quantity-

Rate-

Amount -

90 mm O.D.

Quantity30

Rate11400

Amount 380

110 mm O.D.

Quantity50

Rate22500

Amount 450

Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.

Quantity10

Rate9100

Amount 910

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity6

Rate1140

Amount 190

Size 110 mm

Quantity6

Rate1230

Amount 205

Supply and fixing of UPVC S.W.R. Cowel confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity6

Rate450

Amount 75

Size 110 mm

Quantity6

Rate540

Amount 90

Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90x90x90 mm

Quantity5

Rate1200

Amount 240

Size 110x110x110 mm

Quantity5

Rate1325

Amount 265

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work) Exposed on wall

Quantity-

Rate-

Amount -

20mm dia nominal outer dia pipes

Quantity25

Rate6250

Amount 250

25mm dia nominal outer dia pipes

Quantity50

Rate16250

Amount 325

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.15mm dia nominal outer dia pipes

Quantity120

Rate36000

Amount 300

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.(a) 15mm nominal bore

Quantity10

Rate1000

Amount 100

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931( a) 15mm nominal bore

Quantity10

Rate3900

Amount 390

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore

Quantity4

Rate2160

Amount 540

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931(a) 15mm nominal bore

Quantity14

Rate8120

Amount 580

Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Quantity10

Rate54100

Amount 5410

Providing and fixing gun metal gate valve with wheel of approved quality.

Quantity-

Rate-

Amount -

25 mm dia nominal bore

Quantity4

Rate1840

Amount 460

32 mm dia nominal bore

Quantity1

Rate520

Amount 520

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore

Quantity4

Rate1720

Amount 430

Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Quantity2000

Rate22000

Amount 11

Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity80

Rate48800

Amount 610

Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity1

Rate791

Amount 791

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity16

Rate10736

Amount 671

Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash.

Quantity58

Rate18966

Amount 327

Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash.Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points.

Quantity2

Rate1144

Amount 572

Addition for light / fan points with modular type switch in place of piono type switch.

Quantity71

Rate3124

Amount 44

Addition for two way points with modular type switch in place of piono type switch.

Quantity1

Rate165

Amount 165

Addition for HPSV/Exhaust Fan points with modular type switch in place of piono type switch.

Quantity6

Rate282

Amount 47

Addition for plug points with modular type switch in place of piono type switch.

Quantity58

Rate4814

Amount 83

Addition for call bell points with modular type switch in place of piono type switch.

Quantity2

Rate160

Amount 80

Add for Invertor Wiring in wiring Point for light/Fan/Plug with 1.5 mm Cu Wire

Quantity71

Rate9372

Amount 132

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone)

Quantity275

Rate17050

Amount 62

Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity500

Rate60500

Amount 121

Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity400

Rate59600

Amount 149

Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FRLSH PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.

Quantity300

Rate61200

Amount 204

Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required.

Quantity27

Rate44550

Amount 1650

Supply & fixing of Recess/Surface/Pendent mounting round 6 to 8 Watt LED down lighter having powder coated die cast Aluminium housing with heat sink, diffuser/reflecter, and driver set complete in all respect.

Quantity15

Rate11550

Amount 770

Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect.

Quantity19

Rate22610

Amount 1190

Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.

Quantity2

Rate350

Amount 175

Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.

Quantity2

Rate280

Amount 140

Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.

Quantity2

Rate8152

Amount 4076

Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.

Quantity50

Rate4500

Amount 90

Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.

Quantity100

Rate21000

Amount 210

Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve

Quantity26

Rate6760

Amount 260

Supply and fixing of 63 Amp. 4 Pole MCB (10KA)

Quantity2

Rate4580

Amount 2290

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.600x480x200 mm. size

Quantity2

Rate1300

Amount 650

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size

Quantity2

Rate3440

Amount 1720

Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge.

Quantity2

Rate8740

Amount 4370

Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.

Quantity104

Rate1560

Amount 15

Supply and fixing of single pole MCB blanking plate

Quantity10

Rate250

Amount 25

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.

Quantity15

Rate9375

Amount 625

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.

Quantity8

Rate12960

Amount 1620

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Quantity10

Rate1400

Amount 140

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

Quantity6

Rate1170

Amount 195

Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.

Quantity9

Rate7290

Amount 810

Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work.

Quantity12

Rate1800

Amount 150

Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Quantity12

Rate6204

Amount 517

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sqmm 4 core

Quantity150

Rate49050

Amount 327

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire10 sqmm 4 core

Quantity4

Rate348

Amount 87

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 10 Sq.mm

Quantity16

Rate320

Amount 20

Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair

Quantity80

Rate1328

Amount 16.61

Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Quantity550

Rate15070

Amount 27.4

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

Quantity-

Rate-

Amount -

Telephone socket outlet

Quantity4

Rate395

Amount 98.82

TV antenna socket outlet

Quantity10

Rate988

Amount 98.82

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75mm X 75 mm X 60mm Deep

Quantity12

Rate1395

Amount 116.26

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

Quantity-

Rate-

Amount -

1 or 2 Module (75mm X 75 mm)

Quantity10

Rate2017

Amount 201.79

3 Module (100mm X 75 mm)

Quantity10

Rate2217

Amount 221.72

4 Module (125mm X 75 mm)

Quantity10

Rate2383

Amount 238.32

6 Module (200mm X 75 mm)

Quantity10

Rate2765

Amount 276.52

8 Module (255mm X 125 mm)

Quantity8

Rate2544

Amount 318.04

12 Module (200mm X 150 mm)

Quantity6

Rate2162

Amount 360.39

Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.

Quantity6

Rate837

Amount 139.51

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Quantity15

Rate398

Amount 26.57

roviding, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm Dia

Quantity30

Rate13078

Amount 435.96

Supply & erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required-Make: Usha Cat No.SONATA MAX

Quantity12

Rate27000

Amount 2250

Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX 300mm sweep.

Quantity6

Rate10800

Amount 1800

Supply,instalation,testing, commissioning of 3 phase, KWH Meter with LCD display, RS pot, Wired Communication system with current limiter switch & reset button. (Make:-L&T)

Quantity2

Rate10000

Amount 5000

TYPE-B Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity306.68

Rate42935

Amount 140

Filling by carted earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m.( UPTO 8 KM )

Quantity1074.72

Rate371853

Amount 346

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor Local Sand

Quantity114.98

Rate86235

Amount 750

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity116.6

Rate752070

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in RCC raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity87.44

Rate813192

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity173.68

Rate1710748

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres.

Quantity41.1

Rate367228

Amount 8935

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity333.92

Rate2888408

Amount 8650

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in HAVIER beams having spans upto 6 metres.

Quantity198.64

Rate1774848

Amount 8935

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN / WALL, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity4.62

Rate45507

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity27.86

Rate260491

Amount 9350

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 450 mm dia piles

Quantity2124

Rate6252907

Amount 2943.93

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge.Single pile upto 50 tonne Safe capacity

Quantity-

Rate-

Amount -

Initial test (Test Load 2.5 times the Safe capacity)

Quantity2

Rate8548

Amount 4274.4

Routine test (Test Load 1.5 times the Safe capacity)

Quantity4

Rate61328

Amount 15332.13

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity189.41

Rate975461

Amount 5150

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work

Quantity536.58

Rate3128797

Amount 5831

Class-150 half brick work in 1:4 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.

Quantity251.52

Rate1562190

Amount 6211

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Quantity122.8

Rate11609

Amount 94.54

Providing and laying damp-proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 12.5 mm nominal size).

Quantity122.8

Rate42980

Amount 350

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.

Quantity825.58

Rate156860

Amount 190

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity1477.5

Rate11081250

Amount 7500

Providing and fixing SS sliding door bolts ISI marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm.

Quantity170

Rate64600

Amount 380

Providing and fixing SS tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm.

Quantity1092

Rate229320

Amount 210

Providing and fixing SS handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm.

Quantity876

Rate42048

Amount 48

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Quantity122

Rate3596

Amount 29.48

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Quantity122

Rate103907

Amount 851.7

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Quantity154.56

Rate254472

Amount 1646.43

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primerUsing M.S. angels 40x40x6 mm for diagonal braces

Quantity4.2

Rate16675

Amount 3970.27

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity234.36

Rate689658

Amount 2942.73

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity75.6

Rate174507

Amount 2308.3

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work 35X35X5 MM ANGLE IRON

Quantity901.06

Rate71003

Amount 78.8

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing

Quantity5135.34

Rate404664

Amount 78.8

Providing and fixing M.S. Tubular frames/shutters for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 Coarse sand (FM 2.2-3.6) : 6 graded stone aggregate 20 mm nominal size)

Quantity9141.3

Rate1112496

Amount 121.7

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick

Quantity255.42

Rate199439

Amount 780.83

Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.With 12 mm mild steel U beading.

Quantity255.42

Rate172311

Amount 674.62

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :35 mm thick shutters With ISI marked stainless steel butt hinges ofrequired size Second class teak wood

Quantity234.36

Rate901407

Amount 3846.25

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Quantity358.8

Rate143699

Amount 400.5

Providing and laying "brick coba" 12 cm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and Coarse sand (FM 2.2-3.6) mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and Coarse sand (FM 2.2-3.6) mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and Coarse sand (FM 2.2-3.6) masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.

Quantity825.58

Rate866859

Amount 1050

12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall.

Quantity5423.47

Rate949107

Amount 175

15 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall.

Quantity4672.97

Rate1022212

Amount 218.75

12 mm thick plaster with cement mortar in consisting of 1:3 cement and approved Coarse sand (FM1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. In ceiling

Quantity3034.5

Rate637245

Amount 210

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 Coarse sand (FM 1.5-2.00) On plinth.

Quantity182.76

Rate40435

Amount 221.25

Engraving lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-charge including supply of all materials labour etc .required for proper completion of the work..

Quantity3203.64

Rate172131

Amount 53.73

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand (FM 2.2-3.6)), including pointing the joints with white cement and matching pigments etc., complete.

Quantity2529.71

Rate2400644

Amount 948.98

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand (FM 1.5 - 2.00) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Quantity892.08

Rate787786

Amount 883.09

Supply and fixing of KOTA STONE in flooring 25 mm thick and joint filled with 1:4 cement and Coarse sand (FM 2.2-3.6) with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:4 cement & Coarse sand (FM 2.2-3.6) mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labours, T&P etc. required for proper completion of work.

Quantity395.68

Rate560741

Amount 1417.16

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 Coarse sand (FM 1.5-2.00) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity19.06

Rate32264

Amount 1692.81

Cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 mm thick with 10-20 mm nominal size stone aggregate

Quantity274.14

Rate93207

Amount 340

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Quantity645.8

Rate42635

Amount 66.02

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all material

Quantity9451.98

Rate888486

Amount 94

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Quantity3861.72

Rate474991

Amount 123

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Quantity13313.7

Rate1304742

Amount 98

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity821.48

Rate91184

Amount 111

Painting two coats over priming coat on wood surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity230.16

Rate25547

Amount 111

French spirit polishing : Two or more coats on new works including a coat of wood filler

Quantity117.18

Rate35838

Amount 305.84

Apron drain of width 150mm and depth as per required of site but minimum 150 mm with Earth work in excavation.P.C.C. in 1 : 4 : 8 , Brick work in foundation IN 1:3,20 mm thick plaster in 1:3 and P/L 40mm thick C. C. in 1 :4 neat finish & required slope as per apporoved by E/I.

Quantity304.6

Rate494627

Amount 1623.86

Providing & laying of light cinder filling/ballast under floor of toilet /sunken roof supply of all materials labour T&P etc.required for proper completion of work.

Quantity53.12

Rate79680

Amount 1500

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous Eoropion type w.c. pan with isi marked white solid plastic sheat and lid.

Quantity48

Rate182400

Amount 3800

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with a pair of 15 mm C.P. brass pillar tap.

Quantity48

Rate100800

Amount 2100

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe

Quantity-

Rate-

Amount -

a) 32mm dia

Quantity48

Rate3120

Amount 65

b) 40mm dia

Quantity24

Rate1800

Amount 75

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Quantity24

Rate96360

Amount 4015

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity48

Rate52800

Amount 1100

Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge.(a) 15mm dia nominal dia.

Quantity48

Rate235200

Amount 4900

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet(a) 100 mm diameter

Quantity48

Rate6240

Amount 130

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Quantity72

Rate32400

Amount 450

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms

Quantity72

Rate9236

Amount 128.28

Providing & fixing 600x120x5 mm glass self with edges round off, supported on anodiesd aluminium angle framewith C.P. brass bracket and guard rail complete fixed with 40 mmlong screws, rawl plugs etc, complete.

Quantity48

Rate39652

Amount 826.09

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.(a) 110mm diameter

Quantity300

Rate79656

Amount 265.52

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(a) 110mm

Quantity20

Rate4427

Amount 221.38

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)) and making good the wall etc. complete.(a) 110mm

Quantity120

Rate30841

Amount 257.01

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Quantity20

Rate795

Amount 39.78

Providing and laying cement concrete 1:5:10(1 cement : 5 Coarse sand (FM 2.2-3.6) : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)100/75 mm diameter

Quantity80

Rate59489

Amount 743.62

Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.

Quantity-

Rate-

Amount -

90 mm O.D.

Quantity600

Rate228000

Amount 380

110 mm O.D.

Quantity240

Rate108000

Amount 450

Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.

Quantity120

Rate109200

Amount 910

Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity44

Rate8360

Amount 190

Size 110 mm

Quantity44

Rate9020

Amount 205

Supply and fixing of UPVC S.W.R. Cowel confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90 mm

Quantity24

Rate1800

Amount 75

Size 110 mm

Quantity20

Rate1800

Amount 90

Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.

Quantity-

Rate-

Amount -

Size 90x90x90 mm

Quantity36

Rate8640

Amount 240

Size 110x110x110 mm

Quantity36

Rate9540

Amount 265

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work) Exposed on wall

Quantity-

Rate-

Amount -

20mm dia nominal outer dia pipes

Quantity200

Rate50000

Amount 250

25mm dia nominal outer dia pipes

Quantity160

Rate52000

Amount 325

32mm dia nominal outer dia pipes

Quantity280

Rate109200

Amount 390

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.15mm dia nominal outer dia pipes

Quantity2400

Rate720000

Amount 300

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.(a) 15mm nominal bore

Quantity120

Rate12000

Amount 100

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931( a) 15mm nominal bore

Quantity72

Rate28080

Amount 390

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore

Quantity48

Rate25920

Amount 540

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931(a) 15mm nominal bore

Quantity28

Rate16240

Amount 580

Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Quantity60

Rate3246

Amount 54.1

Providing and fixing gun metal gate valve with wheel of approved quality.

Quantity-

Rate-

Amount -

25 mm dia nominal bore

Quantity20

Rate9200

Amount 460

32 mm dia nominal bore

Quantity14

Rate7280

Amount 520

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore

Quantity20

Rate8600

Amount 430

Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Quantity18000

Rate198000

Amount 11

Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity440

Rate268400

Amount 610

Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity6

Rate4746

Amount 791

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.

Quantity168

Rate112728

Amount 671

Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash.

Quantity408

Rate133416

Amount 327

Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash.Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points.

Quantity24

Rate13728

Amount 572

Addition for light / fan points with modular type switch in place of piono type switch.

Quantity536

Rate23584

Amount 44

Addition for two way points with modular type switch in place of piono type switch.

Quantity6

Rate990

Amount 165

Addition for HPSV/Exhaust Fan points with modular type switch in place of piono type switch.

Quantity72

Rate3384

Amount 47

Addition for plug points with modular type switch in place of piono type switch.

Quantity408

Rate33864

Amount 83

Addition for call bell points with modular type switch in place of piono type switch.

Quantity24

Rate1920

Amount 80

Add for Invertor Wiring in wiring Point for light/Fan/Plug with 1.5 mm Cu Wire

Quantity536

Rate70752

Amount 132

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone)

Quantity3600

Rate223200

Amount 62

Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity3200

Rate387200

Amount 121

Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity2200

Rate327800

Amount 149

Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FRLSH PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.

Quantity1500

Rate306000

Amount 204

Supply and wiring of submain with 4 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 4 sq. mm FRLSH PVC insulated multistrand copper earth contunity wire drawn inside the conduit complete in all respect.

Quantity1400

Rate504000

Amount 360

Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required.

Quantity180

Rate297000

Amount 1650

Supply & fixing of Recess/Surface/Pendent mounting round 6 to 8 Watt LED down lighter having powder coated die cast Aluminium housing with heat sink, diffuser/reflecter, and driver set complete in all respect.

Quantity140

Rate107800

Amount 770

Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect.

Quantity130

Rate154700

Amount 1190

Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.

Quantity24

Rate4200

Amount 175

Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.

Quantity24

Rate3360

Amount 140

Supply and burying earthing Electorde T-19 (Hot Dip Galvanized), Length 3000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified

Quantity4

Rate25800

Amount 6450

Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.

Quantity24

Rate97824

Amount 4076

Supplying and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.

Quantity1500

Rate300000

Amount 200

Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.

Quantity240

Rate21600

Amount 90

Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.

Quantity700

Rate147000

Amount 210

Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve

Quantity240

Rate62400

Amount 260

Supply and fixing of 40 Amp. 4 Pole MCB (10KA)

Quantity24

Rate54600

Amount 2275

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.600x480x200 mm. size

Quantity24

Rate15600

Amount 650

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work.600x480x200 mm. size

Quantity24

Rate41280

Amount 1720

Supply and fixing of surface/ flush mounting 4 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge.

Quantity24

Rate86640

Amount 3610

Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.

Quantity960

Rate14400

Amount 15

Supply and fixing of single pole MCB blanking plate

Quantity48

Rate1200

Amount 25

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.

Quantity144

Rate90000

Amount 625

Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.

Quantity48

Rate77760

Amount 1620

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Quantity96

Rate13440

Amount 140

Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

Quantity72

Rate14040

Amount 195

Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.

Quantity72

Rate58320

Amount 810

Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work.

Quantity96

Rate14400

Amount 150

Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Quantity96

Rate49632

Amount 517

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sqmm 3.5 core

Quantity700

Rate344400

Amount 492

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire50 sqmm 3.5 core

Quantity4

Rate712

Amount 178

Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.50 Sq.mm

Quantity16

Rate768

Amount 48

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm ,CUBICAL PANEL BOARD ( MCCB TYPE ), MAIN L.T.PANEL(METER PANEL BOARD),Incoming :- one (1) No.200Amp. MCCB-1No.,Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.,One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.,One (1) Set of Phase Indication Lamp.,Bus Bar : One (1) No.200 A, TPN aluminimum bus bar of suitable length.,Outgoing :Phase indication lamps on each outgoing to be provided.,100 Amp. MCCB- 1 No., 63 Amp. MCCB- 3 No. OR outgoing as per site requirment(AS/SLD)

Quantity2

Rate276140

Amount 138070

Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.

Quantity2

Rate170

Amount 85

Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.

Quantity4

Rate10200

Amount 2550

Supply and fixing 200 AMP four pole Moulded case type on load change over switch with enclosure(also suitable for panel mounting with extra cost of bus bar) including the cost of labour, T & P , painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.-

Quantity2

Rate20880

Amount 10440

Supply and fixing of single phase multifunctional electronic energy meter 10 to 60 Amp. capacity fitted in integral box on wall complete in all respect.

Quantity2

Rate3396

Amount 1698

Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair

Quantity900

Rate14949

Amount 16.61

Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Quantity2090

Rate57266

Amount 27.4

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

Quantity-

Rate-

Amount -

Telephone socket outlet

Quantity24

Rate2371

Amount 98.82

TV antenna socket outlet

Quantity72

Rate7115

Amount 98.82

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm X 75 mm X 60mm Deep

Quantity96

Rate11160

Amount 116.26

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

Quantity-

Rate-

Amount -

1 or 2 Module (75mm X 75 mm)

Quantity80

Rate16143

Amount 201.79

3 Module (100mm X 75 mm)

Quantity120

Rate26606

Amount 221.72

4 Module (125mm X 75 mm)

Quantity120

Rate28598

Amount 238.32

6 Module (200mm X 75 mm)

Quantity80

Rate22121

Amount 276.52

8 Module (255mm X 125 mm)

Quantity60

Rate19082

Amount 318.04

12 Module (200mm X 150 mm)

Quantity40

Rate14415

Amount 360.39

Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.

Quantity72

Rate10044

Amount 139.51

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Quantity80

Rate2125

Amount 26.57

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm Dia

Quantity300

Rate130788

Amount 435.96

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, jointed with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300mm width x 50mm depth x 1.6mm thickness

Quantity500

Rate257840

Amount 515.68

Supply & erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required-Make: Usha Cat No.SONATA MAX

Quantity96

Rate216000

Amount 2250

Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-300mm sweep.Make: USHA Cat No. TURBO JET DLX

Quantity72

Rate129600

Amount 1800

Supply,instalation,testing, commissioning of 3 phase, KWH Meter with LCD display, RS pot, Wired Communication system with current limiter switch & reset button. (Make:-L&T)

Quantity24

Rate120000

Amount 5000

S/f of 10/20 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same

Quantity6

Rate46800

Amount 7800

PUMP ROOM-Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity11.57

Rate1619

Amount 140

Filling by carted earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m.( UPTO 8 KM )

Quantity4.66

Rate1612

Amount 346

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 ground level and removal of rubbish upto a distsnce of 50m out side the periphery of area cleared. under floor Local Sand

Quantity1.26

Rate945

Amount 750

Providing and laying Cement concrete 1:4:8 (1cement :4 C. sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity2.47

Rate15931

Amount 6450

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.

Quantity0.95

Rate180

Amount 190

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in Foundation & raft, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Quantity3.03

Rate28179

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in colums, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Quantity0.92

Rate9062

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity0.46

Rate4301

Amount 9350

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity1.32

Rate11418

Amount 8650

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in HAVIER beams having spans upto 6 metres.

Quantity1.24

Rate11079

Amount 8935

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity5.67

Rate29200

Amount 5150

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in super structure including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work thickness of wall more than 12cms.

Quantity7.86

Rate45831

Amount 5831

Providing and laying "brick coba" 12 cm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and Coarse sand (FM 2.2-3.6) mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and Coarse sand (FM 2.2-3.6) mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and Coarse sand (FM 2.2-3.6) masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.

Quantity9

Rate9450

Amount 1050

Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings but excluding their supply and including painting with two coats of Black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally.(b) 35 mm thick

Quantity2.1

Rate3990

Amount 1900

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing

Quantity8.64

Rate680

Amount 78.8

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work

Quantity27

Rate2127

Amount 78.8

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but 35X35X5 MM ANGLE IRON

Quantity13.52

Rate1065

Amount 78.8

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity7.72

Rate57900

Amount 7500

Fixing of steel or wooden chaukhats in position

Quantity-

Rate-

Amount -

(a) Door chaukhats

Quantity1

Rate135

Amount 135

(b) Window chaukhats

Quantity1

Rate100

Amount 100

12 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On smooth surface of wall.

Quantity47.15

Rate8251

Amount 175

15 mm thick plaster with cement mortar in consisting of 1:6 cement and approved Coarse sand (FM 1.5-2.00) of minimum thickness not be less than 10 mm including supply of all materials, labour T&P etc. required for proper completion of the work. On rough surface of wall.

Quantity45.16

Rate9878

Amount 218.75

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 Coarse sand (FM 1.5-2.00) On plinth.

Quantity5.57

Rate1232

Amount 221.25

Engraving lines in the plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-charge including supply of all materials labour etc .required for proper completion of the work..

Quantity84.24

Rate4526

Amount 53.73

Making drip course in sun shade or FACIA as per direction ofengineer -in - charge including supply of all materials labour etc.required for proper completion ofthe work.

Quantity2.4

Rate128

Amount 53.73

40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity9.41

Rate4940

Amount 525

2 cm thick cement plaster in Dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved Coarse sand (FM 1.5-2.00) laid in panels ,finished with 3mm floating coat of neat cement or cement & marble dust in ratio of 5:1 including supply of all all materials labour and T& P .Proper completion of work.

Quantity5.85

Rate2772

Amount 473.95

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Quantity54.48

Rate3596

Amount 66.02

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity2.99

Rate331

Amount 111

Same as item 25 above but on new wood

Quantity4.2

Rate466

Amount 111

Finishing walls with water proofing cement paint of approved make and quality on new work with two coat to given even shed including cost of all material.

Quantity52.72

Rate4902

Amount 93

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian Paints after thoroughly brushing the sufface free from mortar dropping and other forein matter and also including prepairing the surface even with Plaster of Paris or approved synthetic material and sand papered smooth including cost of all material.

Quantity45.16

Rate4245

Amount 94

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Quantity97.88

Rate9592

Amount 98

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes

Quantity1.08

Rate843

Amount 780.83

Providing Oxidised iron sliding bolts 16 mm dia with nuts and 250 mm long

Quantity1

Rate144

Amount 144.33

Providing Oxidised iron tower bolt with10 mm dia and screw.(ii) 150 mm long

Quantity5

Rate220

Amount 44.05

Providing Oxidised iron door handles with screws 125 mm long.

Quantity5

Rate146

Amount 29.23

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 Coarse sand (FM 2.2-3.6) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Quantity11.14

Rate6305

Amount 566.04

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 MM DIA

Quantity13.8

Rate3664

Amount 265.52

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion..Shoe (Plain) 110 MM SHOE

Quantity8

Rate756

Amount 94.5

BOUNDARY WALL-Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m.(5 fts.) and lead upto 30m.(100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-incharges upto a distance of 30 m.(100 fts.) from the foundation trenches.

Quantity425.86

Rate59620

Amount 140

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity51.09

Rate329530

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in RCC raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity159.26

Rate1481118

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity20.14

Rate198379

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e. having spans upto 6 metres.

Quantity12.15

Rate108560

Amount 8935

Mild steel or iron in plan work such as reinforced concerte or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level.

Quantity186.36

Rate1397700

Amount 7500

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity15.15

Rate78022

Amount 5150

M-150 class brick work in 1:4 and coarse sand mortar in super structure including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is half brick

Quantity52.92

Rate328686

Amount 6211

12 mm cement plaster in single coat on smooth side of single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (iii) 1cement :6 C. sand

Quantity1144.3

Rate200252

Amount 175

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm): SOR New Item 13.46.1

Quantity1144.3

Rate140748

Amount 123

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but Fabrication of Grill/Stairs case railing

Quantity1653.78

Rate130317

Amount 78.8

Supply and fixing M.S. Work in gate including all necessary for proper completion of the work.

Quantity927.18

Rate82982

Amount 89.5

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity124.55

Rate13825

Amount 111

M.S. GATE-Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.

Quantity10.94

Rate1531

Amount 140

Providing and laying cement concrete of :1:4:8 (1 Cement : 4 Coarse sand (FM 2.2-3.6) : 8 graded stone aggregate 40mm nominal size) and quring complete including cost of form work in foundation and floor.

Quantity1.09

Rate7030

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in raft foundation excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire.

Quantity0.86

Rate7998

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire.

Quantity1.91

Rate18813

Amount 9850

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity6.27

Rate47025

Amount 7500

12 mm thick plaster with cement mortar in proportion of 1:6 cement & Coarse sand (FM 2.2-3.6) including cost of material labour T & P etc complete.

Quantity14.4

Rate2520

Amount 175

Finishing walls with water proofing cement paint of approved make and quality on new work with two coats over and including one coat of white cement to give and even shade including supply of all materials,labour & T&P etc. required for proper completion of the work.

Quantity14.4

Rate1771

Amount 123

mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required form including drilling holes riviting or welding where necessary and their fixing required for proper complition work.

Quantity2052

Rate183654

Amount 89.5

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparing and knotting incl. cost of all etc. required for proper completion of work.

Quantity68.4

Rate7592

Amount 111

CATTLE CATCHER-Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity21.6

Rate3024

Amount 140

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity4.32

Rate27864

Amount 6450

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.

Quantity5.04

Rate25956

Amount 5150

Providing and laying Cement concrete 1:2:4 (1cement :2 Coarse sand (FM 2.2-3.6) :4 graded stone aggregate 20 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity1.58

Rate12561

Amount 7950

40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) with 20 mm nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Quantity18

Rate9450

Amount 525

2 cm thick cement plaster in Dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved Coarse sand (FM 2.2-3.6) laid in panels ,finished with 3mm floating coat of neat cement or cement & marble dust in ratio of 5:1 including supply of all all materials labour and T& P .Proper completion of work.

Quantity14.4

Rate3528

Amount 245

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply fo steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but

Quantity520.8

Rate41039

Amount 78.8

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore.

Quantity120

Rate86335

Amount 719.46

C.C. ROAD- excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity179.82

Rate25174

Amount 140

Providing and laying in cement concrete 1:4:8 (1 cement : 4 Coarse sand (FM 2.2-3.6) : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors .

Quantity20.09

Rate129580

Amount 6450

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity28.13

Rate144869

Amount 5150

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Quantity1113.1

Rate166842

Amount 149.89

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Quantity139.64

Rate321856

Amount 2304.9

P/L in cement concrete 1: 2: 4 (1cement: 2 Coarse sand (FM 2.2-3.6) : 4 graded stone grit 20mm nominal size and curing complete including cost of form work for fixing of hold fasts including of supply of all materials labour T&P etc.required for proper completion of work. Strength should not be less than M-200.

Quantity166.76

Rate1325742

Amount 7950

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 Coarse sand (FM 2.2-3.6)), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Quantity23.11

Rate165298

Amount 7152.69

EXTERNAL WATER SUPPLY-Supply and fixing of UPVC S.W.R pipe type -B confirming to I.S 13592 including jointing the pipe with rubber ring,lubricent and UPVC S.W.R cupler confirming to I.S 14735 .Also including excavation of trenches,cutting of walls and holes and repairing of walls ,floor and refilling the trenches as before but excluding supply and cost of other fitting such as elbow,bend,tee and Y-tee including supply of all material,labour and T&P etc.requried for proper completion of work.

Quantity-

Rate-

Amount -

150mm diameter

Quantity220

Rate171600

Amount 780

200mm diameter

Quantity90

Rate94500

Amount 1050

Providing & laying cement concrete 1:5:10 (1 cement :5 Coarse sand (FM 2.2-3.6) :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.

Quantity-

Rate-

Amount -

150mm/200mm diameter S.W. R Pipe

Quantity310

Rate275900

Amount 890

Providing and fixing square mouth SW Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885

Quantity35

Rate72100

Amount 2060

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 Coarse sand (FM 2.2-3.6)) RCC top slab with 1:2:4 mix (1 cement :2 Coarse sand (FM 2.2-3.6) :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 Coarse sand (FM 2.2-3.6)) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 Coarse sand (FM 2.2-3.6) :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With FPS bricks of class designation 150

Quantity-

Rate-

Amount -

(i) For Sewer Line

Quantity60

Rate570000

Amount 9500

Extra for depth of man hole size 90x80 cm

Quantity10

Rate52000

Amount 5200

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 Coarse sand (FM 2.2-3.6) :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar

Quantity110

Rate41800

Amount 380

in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.a) Pipes 80mm to 300mm diameter.

Quantity220

Rate48400

Amount 220

Providing and laying S & S Centrifugally (Spun) Cast Iron, Class LA (IS : 1536)a) 100mm dia C.I. Double Flanged pipe

Quantity220

Rate221144

Amount 1005.2

Providing Push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket :a) 100mm dia pipe

Quantity80

Rate6744

Amount 84.31

Providing and fixing C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):a) 100mm diameter

Quantity8

Rate29600

Amount 3700

Provding and fixing C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately.a) 50mm dia

Quantity6

Rate27207

Amount 4534.63

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)

Quantity-

Rate-

Amount -

b) 50mm nominal bore.

Quantity35

Rate19250

Amount 550

c) 40mm nominal bore.

Quantity35

Rate13650

Amount 390

d) 32mm nominal bore.

Quantity35

Rate11900

Amount 340

Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.

Quantity-

Rate-

Amount -

b) 50mm nominal bore.

Quantity35

Rate5232

Amount 149.5

c) 40mm nominal bore.

Quantity35

Rate5428

Amount 155.11

d) 32mm nominal bore.

Quantity35

Rate5166

Amount 147.61

Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.

Quantity-

Rate-

Amount -

b) 50mm

Quantity5

Rate3950

Amount 790

c) 40mm

Quantity5

Rate2875

Amount 575

d) 32mm

Quantity5

Rate2600

Amount 520

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 Coarse sand (FM 2.2-3.6) ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

Quantity8

Rate88000

Amount 11000

Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 Coarse sand (FM 2.2-3.6) ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks

Quantity8

Rate54400

Amount 6800

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

Quantity-

Rate-

Amount -

25 to 40 mm dia nominal bore

Quantity8

Rate5029

Amount 628.7

50 to 80 mm dia nominal bore

Quantity8

Rate10055

Amount 1256.98

DRAIN-Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity224.11

Rate31375

Amount 140

P.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 40 mm gauge approved stone ballast in proportion of 1:4:8 incl. cost of form work in foundation & floor

Quantity33.99

Rate219235

Amount 6450

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity69.66

Rate358749

Amount 5150

2 cm thick cement plaster in Dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved Coarse sand (FM 2.2-3.6) laid in panels ,finished with 3mm floating coat of neat cement or cement & marble dust in ratio of 5:1 including supply of all all materials labour and T& P .Proper completion of work.

Quantity457.64

Rate112121

Amount 245

25 mm thick 1:2:4 plain Cement concrete floor with cement , approved Coarse sand (FM 2.2-3.6) and 20mm graded approved stone laid in panels finished with 3mm .flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75mm.thick base concrete consisting of cement local sand brick ballast 40mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any giving them a uniform finish including supply of all materilas ,labour and T& p etc.required for proper completion of the work As in item no 601 above but without base concrete .

Quantity151.43

Rate51486

Amount 340

UG TANK-Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity109.28

Rate15299

Amount 140

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Quantity-

Rate-

Amount -

1.5 m TO 3.0 m

Quantity43.71

Rate7037

Amount 161

3.0 m TO 4.5 m

Quantity21.86

Rate3978

Amount 182

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation and floors.

Quantity2.91

Rate18769

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in RCC raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity9.06

Rate84258

Amount 9300

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Quantity17.75

Rate174837

Amount 9850

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity3.44

Rate29756

Amount 8650

12 mm cement plaster of mix : 1:6 (1 cement: 6 Coarse sand (FM 2.2-3.6)) in single coat on smooth side of single or half brick wall.

Quantity56.95

Rate9966

Amount 175

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Quantity-

Rate-

Amount -

For vertical surface two coats @ 0.70 kg per sqm

Quantity56.95

Rate22910

Amount 402.29

For horizontal surface one coat @1.10 kg per sqm.

Quantity17.5

Rate5426

Amount 310.07

Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg

Quantity3

Rate169

Amount 56.66

HOSE WASHING LINE-Excavationin foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity20.48

Rate2867

Amount 140

Providing and laying Cement concrete 1:4:8 (1cement :4 C sand :8 graded brick aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity3.07

Rate19801

Amount 6450

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.

Quantity29.61

Rate152491

Amount 5150

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in slab beam, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Quantity2.7

Rate23355

Amount 8650

Mild steel or iron in plan work such as reinforced concerte or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level.

Quantity1.59

Rate11925

Amount 7500

12 mm thick plaster with cement mortar in proportion of 1:6 cement & Coarse sand (FM 2.2-3.6) including cost of material labour T & P etc complete.

Quantity24.42

Rate4273

Amount 175

RAIN WATER HARVESTING-Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.

Quantity160.8

Rate22512

Amount 140

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Quantity105.6

Rate17001

Amount 161

Providing and laying Cement concrete 1:4:8 (1cement :4 Coarse sand (FM 2.2-3.6) :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity2.1

Rate13545

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in , excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in slab

Quantity2.64

Rate22836

Amount 8650

Class-150 brick work in 1:6 cement and Coarse sand (FM 1.5- 2.00.) mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.

Quantity40.02

Rate206103

Amount 5150

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity2.07

Rate15525

Amount 7500

15 mm cement plaster of mix : 1:4 (1 cement: 4 Coarse sand (FM1.50-2.00) in single coat on rough side of single or half brick wall. In plinth.

Quantity93

Rate20576

Amount 221.25

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 Coarse sand (FM 2.2-3.6) : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Quantity108

Rate41375

Amount 383.11

Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Quantity3

Rate8019

Amount 2673.06

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia

Quantity3

Rate2064

Amount 688.28

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia

Quantity56.7

Rate45732

Amount 806.57

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia

Quantity31.8

Rate29027

Amount 912.82

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Quantity5.64

Rate6099

Amount 1081.43

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.

Quantity5.64

Rate6130

Amount 1086.99

Supplying, filling, spreading & leveling Coarse sand (FM 2.2-3.6) of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Quantity5.64

Rate6130

Amount 1086.99

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.

Quantity7.62

Rate9360

Amount 1228.37

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge.

Quantity30

Rate22839

Amount 761.31

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Quantity3

Rate699

Amount 233.3

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia

Quantity3

Rate803

Amount 267.86

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Quantity300

Rate108927

Amount 363.09

Supply and fixing of UPVC S.W.R pipe type -B confirming to I.S 13592 including jointing the pipe with rubber ring,lubricent and UPVC S.W.R cupler confirming to I.S 14735 .Also including excavation of trenches,cutting of walls and holes and repairing of walls ,floor and refilling the trenches as before but excluding supply and cost of other fitting such as elbow,bend,tee and Y-tee including supply of all material,labour and T&P etc.requried for proper completion of work.150mm diameter

Quantity300

Rate234000

Amount 780

Providing and laying cement concrete 1:5:10 (1 cement : 5 Coarse sand (FM 2.2-3.6) : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter UPVC SWR pipe

Quantity300

Rate267000

Amount 890

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 Coarse sand (FM 2.2-3.6) (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 Coarse sand (FM 2.2-3.6)), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity300

Rate2145720

Amount 7152.4

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand (FM 2.2-3.6)) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity15

Rate69622

Amount 4641.48

SEPTIC TANK-Earth work in exacavation in trenches for foundations land for pipes cables etc. in ordinary soil (loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m

Quantity169.02

Rate23662

Amount 140

Add extra for additional lift of 1.5m and additional lead 1.5m to 3.0m

Quantity79.24

Rate12757

Amount 161

3.0 m to 4.5m

Quantity21.12

Rate3843

Amount 182

Providing and laying Cement concrete 1:4:8 (1cement :4 fine sand :8 graded brick aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.

Quantity3.76

Rate24252

Amount 6450

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beam, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Quantity2.2

Rate19657

Amount 8935

R.C.C. work with cement approved Coarse sand (FM 2.2-3.6) and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 in slab , excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.

Quantity17.98

Rate155527

Amount 8650

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Fe 500

Quantity23.76

Rate178200

Amount 7500

M-150 brick work in 1:6 cement and Coarse sand (FM 2.2-3.6) mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work.

Quantity13.18

Rate67877

Amount 5150

Cement concrete flooring 1:2:4 (1 cement : 2 Coarse sand (FM 2.2-3.6) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Quantity20

Rate10500

Amount 525

12 mm thick plaster with cement mortar in proportion of 1:6 cement & Coarse sand (FM 2.2-3.6) including cost of material labour T & P etc complete.

Quantity80

Rate14000

Amount 175

Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 Coarse sand (FM 2.2-3.6) : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.

Quantity24

Rate8414

Amount 350.59

Providing & fixing 75mm dia vent pipes. (DSR 17.35.1.2)

Quantity30

Rate28445

Amount 948.17

Providing & fixing C.I.cowel.

Quantity6

Rate2028

Amount 338.05

Providing & fixing C.I. plain bend.

Quantity4

Rate1297

Amount 324.48

Providing & fixing C.I. single equal plain junction.

Quantity6

Rate3477

Amount 579.65

500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Quantity4

Rate10638

Amount 2659.69

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.

Quantity2

Rate46550

Amount 23275.41

TUBE WELL-Transportation charge of heavy rig machine including assembly and other material as required.

Quantity1

Rate20000

Amount 20000

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart! bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. DSR-2019 SINo. 23.1.1

Quantity-

Rate-

Amount -

400 mm dia upto 60 MSINo.

Quantity90

Rate58230

Amount 647

90-150 MSI

Quantity50

Rate40450

Amount 809

150-200 MSI

Quantity20

Rate16180

Amount 809

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. DSR-2019 si No. 23.10

Quantity-

Rate-

Amount -

150 mm nominal size dia having minimum wall thickness 5.00 mm

Quantity70

Rate98350

Amount 1405

200 mm nominal size dia having minimum wall thickness 5.40 mm

Quantity50

Rate87200

Amount 1744

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mru, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fitting & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia

Quantity40

Rate59960

Amount 1499

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assemblv of tube well as oer IS:2800 150 mm dia

Quantity1

Rate243

Amount 243

Providing and fixing M.S. clamp of required dia to the top of casing! housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Quantity2

Rate3476

Amount 1738

Supplying, filling, spreading & leveling' gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of' Engineer-in-charge.

Quantity60

Rate77700

Amount 1295

Development of tube well in accordance with IS : 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, ilc disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- in-charge

Quantity72

Rate64800

Amount 900

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing! casing pipe, rmovable as per requirement, all complete for borewell of: 200 mm dia

Quantity1

Rate243

Amount 243

MAIN PIPING & VALVE a) C.I.D.F. 900 bends of 100 mm dia - 01 No b) C.I.D.F. sluice valves 100 mm size with hand wheel of I.V.C./Updhaya/ Kisloskar make- 02 No c) C.I.D.F. Reflex Valve 100mm size - 01 No d) M.S.D.F. Pipe piece of suitable size of 1.5 mtr. Length In 100 mm size. -02 Pcs e) M.S.D.F. Pipe piece of suitable size of 2.00 mtr. length In 100 mm size -01 Pcs f) C.I.D.F. Tee 100x100x100 mm size - 01 No g) M.S.D.F coloum 7.1mm thick 3M long - 12 No h) Column pipe clamps - 01 Pair i) Complete Nut Bolt washer and rubber packing of suitable size. - L.S Housing Cover of M.S. Sheet - 01 No j) Cross Ring for Reducer - 01 No

Quantity1

Rate138179

Amount 138179

Development by high velocity jetting toughter with Air Compressor:

Quantity-

Rate-

Amount -

Transportation of air compressor

Quantity1

Rate12000

Amount 12000

Erection of Air Compressor

Quantity1

Rate12000

Amount 12000

Runing of Air Compressor

Quantity24

Rate120000

Amount 5000

Water testing chemical and bactriological

Quantity1

Rate5000

Amount 5000

Installation of Pump Set 10 H.P. K.S.B. Make with 4" M.S. Column Pipe Starter 12.5 H.P.V. Meter , A. Meter etc.

Quantity1

Rate130000

Amount 130000

EXTERNAL ELECTRIFICATION-Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Quantity-

Rate-

Amount -

50 sqmm 3.5 core

Quantity60

Rate29520

Amount 492

25 sqmm 3.5 core

Quantity120

Rate44760

Amount 373

10 sqmm 4.0 core

Quantity135

Rate44145

Amount 327

10 sqmm 2.0 core

Quantity150

Rate43800

Amount 292

6 sqmm 2.0 core

Quantity250

Rate69000

Amount 276

Supply and fixing of brass nickle plated compression gland for PVC insulated and armoured served sheathed, under ground cable including rubber ring etc. complete in all respects, the armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

50 sqmm 3.5 core

Quantity8

Rate1424

Amount 178

25 sqmm 3.5 core

Quantity4

Rate492

Amount 123

10 sqmm 4.0 core

Quantity4

Rate348

Amount 87

10 sqmm 2.0 core

Quantity4

Rate320

Amount 80

6 sqmm 2.0 core

Quantity6

Rate456

Amount 76

Supply and fixing of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per directions of the Engineer-in-charge.

Quantity-

Rate-

Amount -

50 sqmm

Quantity20

Rate960

Amount 48

25 sqmm

Quantity15

Rate405

Amount 27

10 sqmm.

Quantity10

Rate200

Amount 20

6 sqmm.

Quantity50

Rate900

Amount 18

Supply and burying of 600x 600x 6.0mm G.I. plate, vestically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead of two no.8 to 10 SWG G.I. wire in 15mm dia G.I. pipe upto (Switch board from apron Switch board the cost of G.I. pipe and G.I. pipe will be extra) 30mm square C.I. frame with linged cover, ,masonary housing, alternate layers of charcoal/coke and salt at leat 150mm thick alround etc.

Quantity4

Rate21520

Amount 5380

Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.

Quantity50

Rate4500

Amount 90

Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.

Quantity110

Rate23100

Amount 210

Supply and erection of steel tubular pole 7.5 meters long designated 410 SP-6 in 1:3:6 cement concrete foundation including excavation, back filling etc. complete in all respects.

Quantity15

Rate151380

Amount 10092

Supply and Fixing of service bracket of 50mm. Dia 4 meter long fabricated from class ''B'' G.I. pipe complete with two bend, socket, wall clamps. 7/3.15 mm G.I. stay wire, stay insulators etc..complete in all respects.

Quantity15

Rate38775

Amount 2585

Supply and fixing of LED street light fitting having diecast aluminium body and diffuser/reflector with driver set suitable for 75 watt to 90 Watt confirming to IP 65 protection complete in all respect.CAT AAA

Quantity15

Rate132750

Amount 8850

Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Quantity300

Rate37200

Amount 124

S/F of 32A 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. board complete in all respects.

Quantity1

Rate1440

Amount 1440

Painting of the pole with 2 coats of aluminium paint over red oxide primer complete in all respects.

Quantity23

Rate7452

Amount 324

S/F of 400 Amp 415V heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc.on angle iron frame complete in all respects.

Quantity1

Rate21850

Amount 21850

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect.

Quantity1

Rate19200

Amount 19200

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm Dia

Quantity45

Rate21093

Amount 468.75

EARTH FILLING WORK-Supply & cartage of earth within 8 km municipal area limit / site work and its proper filling in open general ground in 20cm layer and its proper compacting including cost of earth,cutting,loading,unloading and its other all taxes etc. complete for proper completion of work as per direction of E/I.

Quantity5764.44

Rate1994496

Amount 346

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.