Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil Works Buildings
Coronavirus COVID 19
Eprocure
Opening Date24 Dec 2019
Closing Date31 Dec 2019
Tender Amount₹ 1,10,00,000
Costs
EMD
₹ 5,50,000Document Cost
₹ 5,310Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UPHDB_416019_1Bid Award Id
ViewTender No
L.No.1135/T-1/Dt-23-12-2019Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors complete including cost of all materials, labour and T&P etc.required for proper completion of the work.(SOR Varanasi SI NO 281)
182
-
4900
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits, wall trenches , basement excavation top surface of plinth , filling the junction of walls and floors , along the external perimeter of building , expanion joints , sorrounding of pipes and conduit etc . complete plinth area of building at ground floor only shall be measured as per IS 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as chloropyriphos or Heptrachlor or chlordance will be used . The rate of applaction of chemical emulsion shall be as fallows (1) Treatment for measonarry & foundation 5 litre per sqmtr(2) Back fill in immediate contact with foundation 7.5 litre per sqmtr(3) Treatment for top surface of plinth filling 5 liters per sqmtr(4) Treatment of junction of walls and floors 7.5 litres per sqmtr(5) Treatment of soil along external perimiter of building 7.50 liters per sqmtr(6) Treatment of soil under apron along external perimeter 5 liter per sqmtr
-
-
190
... More
First class/ Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.(SOR Varanasi SI.No.303 AR)
315
-
4102
... More
12 mm thick Plinth plaster with cement mortar 1:4 consisting of 1 part cement and 4 part of approved coarse sand of Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work (SI NO 584AR)
-
-
139
... More
Same as above plinth plaster item but for rough side of wall surface. (SI NO 584AR+ SI NO 596)
-
-
153
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors/Plinth Band/Top Band and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.(SOR Varanasi SI NO 283 AR)
-
-
8000
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.(SOR Varanasi SI NO 284b)
-
-
8300
... More
a)R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in the lighter beams i.e. having spans upto 6 m excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20. (SOR Varanasi SI NO 285b)
-
-
9000
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in R.C.C. Raft foundation and footing with approved stone Grit excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not be less than M-20.(SOR Varanasi SI NO 287b)
1
-
6850
... More
R.C.C work with cement approved coarse sand and 20mm guage approved stone grit in the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 BWGGI Binding wire and including necessary certaining and shuttering etc. and also including supply of all materisls labour and T&P etc required for proper completion of thew work. Binding wire cost being including in the item.(SOR Varanasi SI NO 288b)
0.69
-
8900
... More
Class 150 brick work (230mm thick) in 1:6 cement and coarse sand ( FM 2.25) mortar in super structure above plinth level upto floor two level (upto two storey) including necessary cutting and moulding of brickwork as required and also including supply of all materials, labour and tools and plants etc, required for proper completion of the work.(SOR Varanasi SI NO 310AR)
-
-
4577
... More
Class 150 brick work (115mm thick) in 1:4 cement and coarse sand ( FM 2.25) mortar in super structure above plinth level upto floor two level (upto two storey) including necessary cutting and moulding of brickwork as required and also including supply of all materials, labour and tools and plants etc, required for proper completion of the work. (SOR Varanasi SI NO 310A-AR)
-
-
4689
... More
Painting on D.P.C. with two coats of air blown bitumen 85/50 or85/25 @ 1.70 kg/sqm including cost of fuel wood other materials, labour and T & P etc required for proper completion of the work. (SOR Varanasi CH-08 Item No 3)
-
-
72
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in Charge With average thickness of 120 mm and minimum thickness at khurra as 65 mm(DSR 2018 Item No 22.7.1)
-
-
1398.5
... More
Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks, handle, springs and other Fitting with necessary screws complete.(SOR Varanasi SI NO 470)
-
-
-
... More
For Single Leaf 35 mm thick
-
-
1420
... More
For double leaf shutters 35 mm thick
-
-
1530
... More
Providing & fixing fly proof wire gauze Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 2018 Item No 10.29.2)
51.84
-
929.55
... More
Supply and fixing of 24 gauge Aluminium sheet on toilet door shutters bottem including fixing with Aluminium Greves ,labour including T&P etc requried for proper complition of the work (SOR Allahabad SI No 18.25)
2.7
-
390
... More
Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
... More
b)Fabrication of grill / stairs case railing. (SOR Varanasi SI NO 502)
-
-
55
... More
c)Fabrication of Z-section steel windows. Openable (SOR Varanasi SI NO 502)
-
-
55
... More
d)Fabrication of angle iron door chaukhat of 40*40*5 mm and 35*35*5 mm. (SOR Varanasi SI NO 502)
-
-
55
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend ,hooks and authorized overlapping shall be measured upto floor two level. (SOR Varanasi SI NO 504)
-
-
5320
... More
Fixing of steel or wooden chaukhats in position. (SOR Varanasi 2015 CH-10 Item No-9)
-
-
-
... More
(b) Door chaukhats/ window chaukhats Above 1.5sqm upto 3.00 sqm
-
-
90
... More
(b) Door chaukhats window chaukhats upto 1.5sqm
-
-
60
... More
(c) Ventilator chaukhats
-
-
45
... More
Providing necessary nut bolts/screw for fixing door shutters and fittings requried
-
-
-
... More
Carriage bolts 50x6mm
-
-
0.56
... More
N.F.Screw 35X8 mm
-
-
0.47
... More
N.F.Screw 25X8 mm
-
-
0.29
... More
Cost cement concrete door sills chaukhets boundry posts shalves and similer work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:2:4 excluding supply of reinforcement and its binding but including its fixing and binding the sane with 24 B.W. G.G.I. binding wire and including the cost of binding wire, moulds and all other materials labour and T&P etc. required for proper completion of the work
-
-
7600
... More
12 mm thick plaster with cement mortar 1:6 consisting of 1 part cement and 6 part of approved coarse sand of Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work (SOR Varanasi SI NO 586 AR)
-
-
128
... More
Same as above item but for rough side of wall surface.(SOR Varanasi SI NO 586 AR+597)
-
-
145
... More
Making grooves 10 to 12 mm wide X 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required.(SOR Varanasi SI NO 598)
-
-
26
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.projections.(DSR 2018-Item No 5.30)
-
-
58.9
... More
2.5 cm thick 1:2:4 plain Cement concrete floor with cement approved coarse sand and 2cm. Graded approved stone ballast laid in planels finished with 3mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm. (3") local sand and brick ballast 4 cm. gause in proportion of 1:4:8 and removing any giving then a uniform finish,including supply of all materials, labour, T&P etc. required for proper completion of the work. But without base concrete.(SOR Varanasi SI NO 601b)
-
-
235
... More
40 mm thick 1:2:4 plain cement conc. Floor with cement,approved coarse sand and 2 cm gauge approved stone grit laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ration 5:1 as specified over and 8cm (3") thick base concrete consisting of the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them an uniform finish including supply of all materials, labour t&p etc. required for proper completion of work.(SOR 2018 Ballia SI NO 605)
-
-
380
... More
20 mm thick cement plaster in dado/ skirting in 1:2 consisting of one part of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.(SOR Varanasi SI NO 597)
-
-
195
... More
Supply and fixing of Kota stone flooring 20 mm thick and joint filled with 1:4 cement and coarse sand with approved colouring materials to be given and even shade with 20 mm base coat (bedding) of 1:4 cement and coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour T&P etc. required for proper completion of the work excluding base concrete (SOR 2018 Varanasi CH-13 Item No 8)
-
-
1200
... More
Supplying and fixing 20 mm thick Kota stone tiles in skirting or dado laid with 1.3 cement and approved coarse sand morter finished with in its cement coloured slurry Jointing and Polishing of approved quality complete including supply of all materials, labour and T&P and etc. required for proper completion of the work (SOR 2018 Varanasi CH-13 Item No 9)
-
-
1100
... More
Providing& laying Vitrified tiles of 600 mm x 600 mm size in flooring or skirting laid with 20 cement morter(1Cement 4 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of ali materials, labour T& P required for proper completion of work confirming (SOR 2018 Varanasi CH-13 Item No 7)
-
-
1150
... More
Granite Stone slab 18mm thick mirror polished quarter rounded with anti skid lines in treads of stair case full length flooring over 20 mm (average) thick base laid over and jointed with cement slumy mibxed with pigment match the shade of incluidng rubbing and polishing complete with baseof cement mortor 1:4 (1 cement 4 Coarse sand) etc. complete (DSR 2018 Item 8.2.2.2)
-
-
4007.65
... More
Supply and fixing 6 mm (1/4")thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (SOR 2018 Varanasi SI NO 628)
-
-
1010
... More
Providing and laying rectified ceremic floor tiles 300X300 mm or more size (thickness to be specified by approved make in colours) of frist quality conforming to IS 15622 of approved make in colours & shade on 20mm thick cement mortar 1:4(1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments for 1SQM
-
-
1100
... More
Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal surface upto 10cm width or girth in small articles not exceeding 0.10 sqm area after and including preparation of surface by thoroughly cleaning oil,grease, dirt and other foreign matters and scored by wire brushes,fine steel woool rappers and preparing and knotting including cost of all materials,labours,T&P etc.required for proper completion of the work.(SOR Varanasi 641+642)
-
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex ultima, weather coat all guard ) assian, berger.(DSR 2018 ITEM 13.47.1)
-
-
161.15
... More
Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.(SOR 2018 Ballia SI NO 660+661)
-
-
68.5
... More
Mild Steel or iron work in heavy sizes such as trusses,built up gates, record racks, roof work,gates etc wrought to required from including drilling holes riveting or welding where necessary & their fixing required for proper completion of the work.(SOR Varanasi SI NO 503)
292
-
63
... More
White wash three coats including supply of all material ,labour T&P etc requried for proper complition of the work.(SOR Varanasi SI NO 673)
348.84
-
13.5
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water tinnable priming coat with cement primer.(DSR2018 ITEM NO.13.41.1)
-
-
153.45
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR2018 ITEM 13.80)
2000
-
115.15
... More
Fxing panes of glass with and including putty and brads, and including supply of materials labour and Tools and plants, etc. required for proper completion of the work, but including cost of glass (b) 3.8 to 4.7mm thick (DSR2018 ITEM 10.30.1)
-
-
900.53
... More
Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) (DSR 2018 Item No 21.3.2)
12
-
1296.4
... More
Providing and fixing glass strips of 3mm thickness in joints of floor and skirting at the time of laying of floors flush with floorlevel incuding ,labour,tools plants etc complete.(SOR Varanasi SI NO 631)
-
-
-
... More
25 mm thick
-
-
25
... More
35 mm thick
-
-
28
... More
Providing Stainless steel sliding bolts 16 mm dia with nuts and 300 mm long.(MR)
-
-
300
... More
Providing Stainless steel sliding bolts 16 mm dia with nuts and 250 mm long.(MR)
-
-
250
... More
Providing Stainless steel tower bolt with 10 mm dia and screw.300 mm long (MR)
-
-
150
... More
Providing Stainless steel door handles with screws 125 mm long. (MR)
-
-
70
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (3/4"x3/8"x1/12") and braced with flat from diagonals 20x5 mm (3/4"x3/16") size with top and bottomralls of T iron 40x40x6 mm ( 1 % " xl % " x ) " ) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint.(SOR Varanasi SI NO 518)
-
-
4600
... More
12 mm thick bearing plaster with cement mortar 1:6 consisting of 1 part cement and 6 part of approved coarse sand of with one coat of white lime .Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work (SOR Varanasi SI NO 586AR+672)
-
-
138.5
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Light shade using white cement (DSR 2018 ITEM NO 11.20.1)
-
-
1221.65
... More
Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).The Sections will be used as per direction of E/I (DSR 2018 Item No 21.1.1.1)
50
-
423.95
... More
Same as DSR 2018 item No 21.1.1.1 but For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) The Sections will be used as per direction of E/I (DSR 2018 Item No 21.1.2.1)
120
-
417
... More
Providing and Fixing 5 mm thick Aluminium Composite Panel (ACP Sheet) in panelling fixed in aluminium doors,windows shutters and partition frames with cp brass/Stainless steel screw etc. complete as per archictectural drawings as per direction of E/I (MR)
-
-
740.65
... More
Providing and fixing of Stainless steel hinges (heavyweight) 125x64x1.9mm IS : 12817 marked (MR)
-
-
70
... More
Providing and fixing of Stainless steel hinges (heavyweight) 100x58x1.9mm IS : 12817 marked (MR)
-
-
60
... More
Providing and fixing of Stainless steel hinges (heavyweight) 75x47x1.8mm IS : 12817 marked (MR)
-
-
35
... More
Providing and fixing aluminium sliding door bolts of size 300x16 mm , ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.(DSR 2018 ITEM 9.96.1)
-
-
257.15
... More
Providing and fixing aluminium tower bolts of size 300x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete.(DSR 2018 ITEM 9.97.1)
-
-
116.8
... More
Providing and fixing aluminium handles of size 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (DSR 2018 ITEM 9.100.2)
-
-
52.85
... More
Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.complete.(DSR 2018 ITEM 9.101.2)
-
-
62.05
... More
Providing and fixing aluminium extruded section body tubular type universal 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(DSR 2018 ITEM NO 9.84)
-
-
851.6
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests (DSR 2018 Item No 17.1.1 )
-
-
5421.5
... More
Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required .Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap. (DSR 2018 Item No 17.7.3 )
-
-
2846.9
... More
Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required .White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap. (DSR 2018 Item No 17.7.7 )
-
-
2196.05
... More
Providing & fixing White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked (DSR 2018 Item No 17.7.9)
-
-
3417.55
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
32 mm dia (for wash basin) (DSR 2018 Item NO 17.28.1.1)
-
-
87.7
... More
40 mm dia (for sink and urinal) (DSR 2018 Item NO 17.28.1.2)
-
-
98.4
... More
Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(DSR 2018 Item No 17.31)
-
-
1283.05
... More
Providing & fixing white vitreous china flat back half stall Urinal of 580x380x350 mm with white PVC automatic flushing cistern with fittings standard size CP brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in CP brass including painting of fittings and brackets cutting & making good the walls & floors wherever required.Single half stall urinal with 5 liter P.V.C. automatic flushing cistern (DSR 2018 Item No 17.5.1)
-
-
9360.6
... More
Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required.510 x 1040 bowl depth 250 mm (DSR 2018 Item No 17.10.1.1)
-
-
5155.95
... More
Providing & fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40 mm C. P. brass waste and 40 mm C. P. brass trap with necessary C. P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required.size 450 x 300 x 150 mm.(DSR 2018 Item No 17.11.1)
-
-
4122.55
... More
S/F of upvc SWR Pipe Type -B confirming to IS -13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls , floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. a)110mm dia SWR Pipe
-
-
-
... More
b)r 90mm dia SWR Pipe-OD (SOR Aligarh CH-23 Item No 34 ii)
-
-
360
... More
110mm dia SWR Pipe-OD (SOR Aligarh CH-23 Item No 34 iii)
-
-
428
... More
S/F of upvc SWR Nahani Trap size100/90mm confirming to IS -14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.(SOR Aligarh CH-23 Item No 35)
-
-
865
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar (SOR Aligarh CH-25 Item No 11)
16
-
290
... More
S.C.I. Tee 150 mm (DSR 2018 Item No 7087)
2
-
570
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes OR SWR Pipes including bed concrete as per standard design.
-
-
-
... More
90mm dia to 110 mm dia SWR/SW Pipe OD (DSR 2018 Item No 19.2.1)
235
-
817
... More
above to 110 mm dia and upto 160 mm dia SWR/SW Pipe OD (DSR 2018 Item No 19.2.2)
-
-
999.15
... More
S/F of upvc SWR Cowel confirming to IS -14735
-
-
-
... More
90 mm dia (SOR Aligarh CH-23 Item No 38)
-
-
60
... More
110 mm dia (SOR Aligarh CH-23 Item No 38)
-
-
66
... More
Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, inluding fixing the pipe with clamps at 1 m. spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work exposed on wall. (SOR Aligarh CH-23 Item No 1)
-
-
-
... More
a)25mm dia nominal bore (DSR 2018 Item 18.1.3)
-
-
362.95
... More
b) 32mm dia nominal bore (DSR 2018 Item 18.1.4)
-
-
468.95
... More
c) 40mm dia nominal bore (DSR 2018 Item 18.1.5)
-
-
659.55
... More
d)50mm dia nominal bore (DSR 2018 Item 18.1.6)
-
-
824.8
... More
Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, inluding fixing the pipe with clamps at 1 m. spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the wall etc.
-
-
-
... More
b) 20mm dia nominal bore (DSR 2018 Item 18.2.2)
-
-
478.6
... More
b) 25mm dia nominal bore (DSR 2018 Item 18.2.2)
-
-
553.5
... More
Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching , reifilling and testing of joints complete as per engineer in charge. External Work a)25mm dia nominal bore
-
-
-
... More
b) 25mm dia nominal bore (DSR 2018 Item 18.9.3)
-
-
220
... More
b) 32mm dia nominal bore (DSR 2018 Item 18.9.4)
-
-
240
... More
c) 40mm dia nominal bore (DSR 2018 Item 18.9.5)
-
-
315
... More
d) 50mm dia nominal bore (DSR 2018 Item 18.9.6)
-
-
490
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
a)25 mm nominal bore (DSR 2018 Item 18.17.1)
-
-
497.15
... More
b) 32 mm nominal bore (DSR 2018 Item 18.17.2)
-
-
581.25
... More
c) 40 mm nominal bore (DSR 2018 Item 18.17.3)
-
-
678.4
... More
d) 50 mm nominal bore (DSR 2018 Item 18.17.4)
-
-
869.2
... More
e)65 mm dia nominal bore (DSR 2018 Item 18.17.5)
6
-
1488.1
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
-
-
-
... More
15 mm nominal bore (DSR 2018 Item NO 18.18.1)
-
-
338.7
... More
20 mm nominal bore(DSR 2018 Item NO 18.18.2)
-
-
386.4
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore (DSR 2018 Item NO 18.13.1 )
8
-
673.45
... More
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. (DSR 2018 Item NO 18.21.2.1)
-
-
83
... More
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931.(DSR 2018 Item NO 18.49.1)
-
-
418.95
... More
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (DSR 2018 Item NO 18.50.1)
-
-
618.8
... More
Providing and fixing 15 mm nominal bore C.P brass Stop cock of approved quality conforming to IS standards and weighing not less than 810 gms. (DSR 2018 Item NO 18.52.1)
-
-
606.25
... More
Providing & fixing 100 mm dia C.P brass shower rose with 15 mm inlet.(DSR 2018 Item NO 18.22.1)
-
-
151.9
... More
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931.(DSR 2018 Item NO 18.53.1)
-
-
532
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank.1000 litres capacity (DSR 2018 Item NO 18.48)
-
-
8.8
... More
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with class 150 bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm. size P type(DSR 2018 Item NO 19.4.1.2)
-
-
2311.05
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.(MR)
-
-
300
... More
Providing & fixing ISI marked (IS : 778) brass gate valve (class 1, PN - 1 MPa) with wheel of approved quality (screwed end)
-
-
-
... More
a)15 mm nominal bore (MR)
-
-
895
... More
b) 20 mm nominal bore (MR)
-
-
895
... More
Providing & fixing of medium class PVC spout up to 300 mm. length including cutting and making good the walls and floors etc. as required.50 mm dia. (MR)
-
-
70
... More
Constructing brick masonry chamber 600 x 600 x 750 mm inside with class 150 brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve, with C. I. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design (DSR 2018 Item No 18.33.1)
-
-
6150
... More
Constructing brick masonry manhole with clas 150 bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) (DSR 2018 Item NO 19.7.1)
2
-
10905.05
... More
Constructing brick masonry manhole with class 150 bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) Inside size 90 X80 cm. and 45 cm. deep including CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (wt of cover 58 kg and wt. of frame 58 kg.)(DSR 2018 Item NO 19.7.1.1)
19
-
10905.05
... More
Constructing brick masonry manhole with class 150 bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) Inside size 120 X 90 cm. and 90 cm. deep including CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (wt of cover 58 kg and wt. of frame 58 kg.)(DSR 2018 Item NO 19.7.1.1)
2
-
22939.65
... More
Excavating trenches in all kind of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter. (DSR 2018 Item NO 2.10.1.2)
145
-
364.2
... More
Extra for depth for manhole with class 150 bricks bricks size 90 X 80 cm. (DSR 2018 Item NO 19.8.1)
2
-
7503
... More
Extra for depth for manhole with class 150 . bricks .size 1.2m X 90 cm.(DSR 2018 Item NO 19.8.2)
1
-
8994.6
... More
Providing & fixing ISI marked (IS : 778) brass gate valve (class 1, PN - 1 MPa) with wheel of approved quality (screwed end) 20 mm nominal bore (MR)
4
-
900
... More
Providing and fixing terminal guard 75 mm Sand cast iron S&S as per IS - 3989 (DSR 2018 Item No 3734)
2
-
210
... More
Supply and fixing of UPVC SWR plain bend OF 75 MM dia conforming to IS-14735 (SOR Aligarh CH-24 Item No 37)
2
-
137
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 (DSR 2018 Item 19.32.1)
-
-
25278.75
... More
Wiring point for light with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash.(SOR 2018 Electrical SI NO 131(C))
-
-
643
... More
Wiring point for fan. and light duty exhaust fan with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash. (SOR 2018 Electrical SI NO 133(C))
-
-
708
... More
Wiring pointfor 5 amp plug point with piano type switch & socket etc.with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash. (SOR 2018 Electrical SI NO 134(C))
-
-
335
... More
Wiring point for call bell with piano type switch or socket etc.with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash. (SOR 2018 Electrical SI NO 135(C))
-
-
585
... More
Supply & fixing of power plug with 15 amp 250 volts flush type switch & 3 pin 15 amp 250 volts flush type socket in suitable M.S. box of 175 mm * 100mm * 50 mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washers complete in all respect. (SOR 2018 Electrical SI NO 1139)
-
-
340
... More
Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.(SOR 2018 Electrical SI NO 221(C))
-
-
149
... More
Supply and wiring of submain with two number 16 sqmm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC Conduit with one no 10 sqmm FRLSH PVC insulated multistrand copper conductor cable cable as earth continuity wire drawn in conduit.(SOR 2018 Electrical SI NO 224(C))
-
-
395
... More
Supply and laying of heavy duty PVC conduit complete with bend and other accessories as required and 14 S.W.G. fish steel wire etc. in slab alongwith reinforcement before concreting and plastering complete in all respects.
-
-
-
... More
a)20 mm dia. conduit (SOR 2018 Electrical SI NO 281 A)
-
-
39
... More
b) 25 mm dia. conduit (SOR 2018 Electrical SI NO 282 A)
-
-
50
... More
S/F of surface / flush mounting SPN Distribution board without MCB complete in all respects as directed at site .12 WAYS (SOR 2018 Electrical SI NO 1025A -CAT-A)
-
-
2250
... More
Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (SOR 2018 Electrical SI NO 1002.Cat. A)
-
-
260
... More
Supply Fixing and making commection of 30 MA E.L.C.B. (Earth leakage circuit breaker) of din/R.C.C.B. rail mounting complete in all respects as per direction and satisfaction of engineer-in-charge.40 Amp 2 Pole(SOR 2018 Electrical SI NO 393)
-
-
2280
... More
Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnel for watering and one earthing lead of no. 8 SWG G.I. wire in 15 mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect .(SOR 2018 Electrical SI NO 703)
-
-
5380
... More
Supplying & Laying of one number 8 to 6 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site.(SOR 2018 Electrical SI NO 723)
-
-
210
... More
S/F of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.(SOR 2018 Electrical SI NO 412 CAT-AAA)
-
-
1650
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect (SOR 2018 Electrical SI NO 1402 CAT-AAA)
-
-
1350
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect.(SOR 2018 Electrical SI NO 1413 CAT-AAA)
-
-
1190
... More
Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.(SOR 2018 Electrical SI NO 1413A CAT-AAA)(Excluding Tube)
-
-
620
... More
Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.(SOR 2018 Electrical SI NO 1414 CAT-AAA)
-
-
1790
... More
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required. (SOR 2018 Electrical SI NO 1101 )
-
-
175
... More
Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect.(SOR 2018 Electrical SI NO 1115 )
-
-
80
... More
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.(SOR 2018 Electrical SI NO 1120 )
-
-
195
... More
Making hole in the wall for exhaust fan and finishing properly complete in all respect.(SOR 2018 Electrical SI NO 1121 )
-
-
375
... More
S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length fabricated from 16 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T&P etc. for proper completion of work.(SOR 2018 Electrical SI NO 1149 )
-
-
150
... More
S/F of door chime on Polished M.D.F.E.G. board including making connections etc. complete in all respects.(SOR 2018 Electrical SI NO 1102 )
-
-
200
... More
S/F of danger board fabricated from 10 gauge M.S. sheet as per E/I rules.(SOR 2018 Electrical SI NO 1109 )
-
-
85
... More
Supply and fixing 2 way 16 amp 240 v SPN metal clad rewirable type distribution fuse board complete with 16 amp /240 volt SPN metal clad rewirable type switch fuse unit on M.D.F.E.G.board in all respect (CAT-B) (SOR Electrical SI NO 361)
-
-
940
... More
Supply and fixing of sheet enclosure for SPMCB with neutrall link and earth terminal (SOR Electrical SI NO 1032)
-
-
550
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet (Electrical DSR 2018 Item No 1.24.6)
-
-
119
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair(Electrical DSR 2018 Item No 1.18.2)
-
-
20
... More
Providing, fixing, connecting & testing of Krone box (Telephone Tag Block) in a thermoplastic, IP 65 (weather proof) enclosure, internally embedded gasket, anti corrosive, insulated and shock proof with provision for cable through IP 65 glands complete in all respects. (Make : Hensel) 10 pair krone (Hensel - KG 9001 - size 136*253*115 mm) (MR)
-
-
940
... More
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete (Make : Bajaj / Crompton / Havells) 1400 mm sweep (MR)
-
-
2176
... More
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Usha / newtek / Havells) 300 mm sweep (MR)
-
-
1800
... More
Supply and erection of steel tubular pole 9.0 meters long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation, back filling etc. complete in all respects. (SOR Electrical 2018 SI No.610 )
5
-
11477
... More
Supply and erection of 'D' clamps of 50x6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. (SOR Electrical 2018 SI No.623 )
30
-
223
... More
Supply and fixing of 100mm x 100mm shackle insulator/100mm x 80mm pin insulator including G.I. bolts/spindle nuts etc. complete in all respects. (SOR Electrical 2018 SI No.621)
20
-
79
... More
Supply and fixing of 75mm x 90mm shakle insulator/100mm x 65m pin insulator G.I. bolts/spindle nuts etc. complete in all respects. (SOR Electrical 2018 SI No.620 )
10
-
68
... More
Supply and erection of stay set at least 3.5 meters away from the pole complete with galvanised 19mm dia x 1.80 meter long stay rod 30mm x 30mm x 6.3mm anchor plate, thimple, stay clamps, stay insultors, 19mm x 600mm double screw tightner 7/3.15 G.I. stay wire etc. in 1:3:6 cement concrete in all respects. (SOR Electrical 2018 SI No.631 )
2
-
3029
... More
Supply and erection of overhead line with ACSR conductor on pole/service bracket including binding etc. complete in all respects. (SOR Electrical 2018 SI No.627 )
65
-
263
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.
-
-
-
... More
a) 185 sqmm 3.5 core (SOR Electrical 2018 SI No.501q )
25
-
1140
... More
b) 120 sqmm 3.5 core (SOR Electrical 2018 SI No.501o )
50
-
824
... More
c) 25 sqmm 3.5 core (SOR Electrical 2018 SI No.501j )
30
-
373
... More
d) 10 sqmm 4 core (SOR Electrical 2018 SI No.501h)
80
-
327
... More
e) 16 sqmm 2 core (SOR Electrical 2018 SI No.501i)
25
-
343
... More
Supply and fixing of LED Street light Fitting having
die cast aluminium body and diffuser with driver set
suitable for 15 Watt. to 25 Watt. Confirming to IP 66
protection complete in all respect (SOR Electrical 2018 SI No.1419 CAT-AAA)
7
-
2070
... More
Supply and fixing danger board fabricated from 10 gauge M.S. sheet as per E.I. rules. (SOR Electrical 2018 SI No.1109)
1
-
85
... More
Supply and fixing fire extinguisher, dry chemical type 5.00 Kg. capacity, (ISI Mark) complete with initial charge and wall bracket, alongwith supply of all materials and labour for proper completion of work. (SOR Electrical 2018 SI No.1131)
1
-
7860
... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported back with hard board or soft board with supply of all material labour T & P for proper completion of work. (SOR Electrical 2018 SI No.1134)
1
-
305
... More
S&F of 32 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respects.(SOR Electrical 2018 SI No.302)
1
-
1370
... More
Boring/drilling bore well of 150 mm nominal size dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level (MR)
70
-
700
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 100 mm nominal size dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge (DSR 2018 Item No 23.3.1)
60
-
600.35
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC ISI Marked medium well screen (RMS) pipes of 100 mm nominal size dia with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge(DSR 2018 Item No 23.4.1)
6
-
651.45
... More
Supply and Fixing of ISI marked PVC Socket 100 mm dia and including all related fixing material all T&P complete as per direction of E/I (MR)
12
-
180
... More
Providing and fixing Bail plug / Bottom plug of 100 mm dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) (DSR 2018 Item No 23.15.1)
1
-
227.45
... More
Providing and fixing M.S. clamp of 100 mm dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete (DSR 2018 Item No 23.14.1)
1
-
1409.3
... More
Supply and fixing of nylon jali around the slotted pipes complete as required.
6
-
600
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer in-charge.(DSR 2018 Item No 23.8)
3
-
1497.7
... More
Supply of submersible pump of 5.0 H.P. of make KSB/Crompton with control panel complete.
1
-
50000
... More
supply of 4.0 sqmm 3 core PVC copper conductor submersible cable panel to submersible pump)
80
-
145
... More
supply of steel wire rope
80
-
95
... More
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. (DSR 2018 Item No 18.44)
60
-
315
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore :(DSR 2018 Item No 18.17.3)
2
-
678.4
... More
Instalation, testing and commissioning of submersible pump electric panel with all fittings complete including all T&P for proper completion of the work.(MR)
1
-
6000
... More
Laying C.C.Road slab consisting of 1:2:4 cement coarse sand & approved 20 mm Gauge stone ballast ,over prepared sub grade after its rectifications & bringing it to proper camber & including supply of all materials,labour and T & P etc.required for proper completion of work finished to required for proper completion of work finished to required templete as direction by Engineer-In-Charge but excluding cost of required for rectification of the sub grade (SOR Varanasi SI NO 773A)
61
-
5900
... More
Making and filling expansion and construction joint with bitumen 40% asbostus5% and c.sand including supply of all materials,labour,T&P etc.for cc roadas per direction of E/I @3.00 meter center to center for one meter long and 1 cm depth (DSR 2018 Item No 16.46.1)
135
-
3.3
... More
S/L of 125micron polythene sheet under the foundation (for anti salt peter treatment) or over sub-base to act as separation between sub-base and conc. Slab (for C.C.Road,Slab), including supply of material, labour, T & P required for proper completion of the work.(MR)
405
-
80
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements