Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Feb 2025
Closing Date17 Feb 2025
Tender Amount₹ 4,78,00,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I and Above
Bid Capacity
... View More
The bid capacity required in the given tender involves both financial and experiential components. 1. Average Annual Financial Turnover: Not Less than 40% of the bid value. The formula for calculating the required average annual financial turnover is: Average Annual Financial Turnover ≥ 0.4 * Bid Value. Given the bid value is Rs. 478 Lacs, the required average annual financial turnover is: Average Annual Financial Turnover ≥ 0.4 * 478 Lacs = Rs. 191.2 Lacs. 2. Liquid Assets: Not Less than 25% of the bid value. The formula for calculating the required liquid assets is: Liquid Assets ≥ 0.25 * Bid Value. Given the bid value is Rs. 478 Lacs, the required liquid assets are: Liquid Assets ≥ 0.25 * 478 Lacs = Rs. 119.5 Lacs. 3. Experience: The bidder should have experience of having successfully completed similar works during the last 7 years, with a total value of: - One similar work costing not less than 80% of the bid amount. The formula is: One work ≥ 0.8 * Bid Value. Given the bid value is Rs. 478 Lacs, the required value for one work is: One work ≥ 0.8 * 478 Lacs = Rs. 382.4 Lacs. - Two similar works each costing not less than 50% of the bid amount. The formula is: Two works, each ≥ 0.5 * Bid Value. Given the bid value is Rs. 478 Lacs, the required value for each of two works is: Two works, each ≥ 0.5 * 478 Lacs = Rs. 239 Lacs each. - Three similar works each costing not less than 40% of the bid amount. The formula is: Three works, each ≥ 0.4 * Bid Value. Given the bid value is Rs. 478 Lacs, the required value for each of three works is: Three works, each ≥ 0.4 * 478 Lacs = Rs. 191.2 Lacs each. Therefore, the bid capacity required in the given tender to bid having value and formulas is found and specified above.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed similar works during the last 7 years. The similar works should be of the following value: - One similar work costing not less than 80% of the Bid Amount (Rs 478 Lacs), - Two similar works, each costing not less than 50% of the Bid Amount, - Three similar works, each costing not less than 40% of the Bid Amount. This means the bidder should have completed at least one similar work with a value of not less than 40% of the bid value, which is Rs. 478 Lacs. The bidder must have executed works of similar nature and magnitude, with a performance that has been found to be good. The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum calculated from the date of completion to the last date of receipt of Bid.
Costs
EMD
₹ 9,56,000Document Cost
₹ 7,670Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_1001762_1Tender No
171/S-1/02 Dt. 23.01.2025Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
96.72
1633
157959.24
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
676.04
238
161188.22
... More
Providing and laying in position specfied grade of reinforcement cement concrete, excluding the cost of centering,shuttering,finishing & reinforcement. All work up to plinth level.1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size)
169.82
6956
1181298.49
... More
Reinforcement cement concrete work in beam,suspended floors,roof having slope up to 5% andings,balconies,shelves,chajjas,lintels,bands,plain windows sills,stair case & sprial stair case above plinth up to floor five level excluding the cost of centering,shuttering,finishing & reinforcement with 1:1.5:3 (1 cement,1.2 coarse sand zone-iii,3 graded stone aggregate 20mm. (Nominal size)
355.48
8716
3098498.76
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
74.86
472
35357.88
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound.
18.32
6
121.83
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
18.32
6058
110993
... More
Centering,shuttering inluding strutting,proping etc. & removal of form for.Foundations, footings, bases of columns, etc. for mass concrete.
396.64
301
119610.76
... More
Centering,shuttering inluding strutting,proping etc. & removal of form for.Suspended floors, roofs, landings, balconies and access platform.
1459.8
713
1040924.99
... More
Centering,shuttering inluding strutting,proping etc. & removal of form for.Lintels, beams, plinth beams, girders, bressumers and cantilevers.
807.88
566
457494.37
... More
Centering,shuttering inluding strutting,proping etc. & removal of form for.Columns, Pillars, Piers, Abutments, Posts and Struts.
402.12
739
297263.19
... More
Brick work with common burnt clay (non-modular) bricks of class-150 in foundation & plinth in. Cement morter 1:6 (1 cement:6 coarse sand)
141.15
5484
774165.41
... More
Brick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
277.5
7002
1943188.2
... More
Half brick masonry with common burnt clay (non modular) bricks of class 150 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)
161.28
884
142627.97
... More
Supply & Fixing 60 mm thick Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P. cement, Smooth high gloss finish skid reditant manufactured from rubber moulds through vibro-compression machanism. the compressive strength of concrere paver block shall not be less Than 30MPA ((M-30) AND wight 5kg per no confirming to IS;15658-2006 with a 4 cm thick layer of fine sand including cost of material,labour, T& p etc. requried for proper completion of the work as directed by Enginner-in-charge. (I)Grey color )
74.14
747
55417.43
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (a) Single leaf
42.48
2563
108879.64
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)(b) Double leaf
29.34
2563
75200.77
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
473.22
100
47487.63
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
248
175
43645.52
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
1431
168
241109.19
... More
Fixing of Door, windows/ventilators chaukhats in position.(a) Door chaukhats
26
135
3510
... More
Fixing of Door, windows/ventilators chaukhats in position.(b) Window chaukhats
20
100
2000
... More
Fixing of Door, windows/ventilators chaukhats in position.(c) Ventilator chaukhats
6
75
450
... More
Steel reinforcment for R.C.C work including strainghtening cutting bending placing in position & binding all complete up to plinth level. Thermo machanically treated bars of grade Fe-500D or more.Same as above for ground floor
1203.41
8293
9980685.41
... More
15 mm cement plaster on plinth plaster of mix : 1:6 (1 cement: 6coarse sand)
59.81
304
18183.44
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
2405.63
264
635735.84
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. (2.25FM)
5187.69
294
1527930.34
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
1074.96
60
64809.34
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete. 11.46.2 Size of Tile 600x600 mm
3129.11
1248
3905536.06
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
901.76
975
879261.09
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
1094.04
3949
4321250.13
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
422.31
131
55436.63
... More
Painting wood work with Deluxe Multi Surface Paint of
required shade. Two or more coat applied @ 0.90 ltr/10
sqm over an under coat of primer applied @0.75 ltr/10
sqm of approved brand and manufacture
317.52
135
43036.66
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
1267.56
123
156543.66
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats
10848.49
124
1349009.73
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
12116.05
120
1453926
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
26
425
11050
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete(a) 200 mm x 10mm
55
58
3190
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm
52
91
4766.32
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
15.41
500
7705
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
53.05
474
25172.76
... More
Providing and laying integral cement based water proofing treatment (brick coba )including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
2024.59
1295
2622775.36
... More
30 mm thick factory made Polyvinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.
31.5
2502
78818.36
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
108
593
64149.84
... More
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.1 steel 0.7 mm thick from the soffit with the help of soffit cleat 37x27x25x1.6
mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c’/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with the help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors
have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height,
made of G | sheet having galvanizing of 100 gms/ sqm (both
sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC of 0.5, electro statically polyester
powder coated of thickness 60 microns (minimum), including
factory painted after bending and perforation.
204.82
1810
370873.72
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptableVentilator Casement window single panel with or without
fixed panel with S.S. 304 friction hinges as per size and
weight of sash, single point locking zinc alloy (zamak) powder coated handles. 9.147.D1.1 Using R1 series with frame (33 mm & above )
x (35 mm & above) & sash /mullion (33 mm &
above) x (50 mm & above). (Height upto 0.90
metre).
71.55
10151
726355.57
... More
Making the opening in brick masonry including dismantling in floor or wall by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.
14.4.1 For door/ window/ clerestory window
15.75
972
15313.57
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
3909.86
42
164331.42
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
2606.58
15
39593.95
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
4615.73
204
945763.08
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
170.51
202
34610.12
... More
Reinforced for R.C.C. work including streigtening cutting bending binding & placing in position complete @ 1.00%
870.44
82
72194.29
... More
Providing M.S. foot rest including fixing with 20x20x10cm. Cement concrete block 1:3:6 (1cement : 3Coarse sand : 6 graded aggregate of nominal size 20mm) as per standard design with 20x20mm s.q. bars
66
418
27645.42
... More
S.W. tee 160x15x150mm.
2
303
607.52
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : a) 50mm dia sand cost iron S & S pipe
3
258
775.14
... More
b)Providing and fixing soil, waste and vent pipes : 75mm dia sand cost iron S & S pipe
2
803
1606.82
... More
c) Providing and fixing soil, waste and vent pipes : 100mm dia sand cost iron S & S pipe
2
885
1771.62
... More
Providing & fixing sand cost iron terminal guard(a) 100mm dia
1
339
339.9
... More
Providing & fixing sand cost iron terminal guard(b) 75mm dia
1
262
262
... More
Providing & fixing Plane sand cost iron S & S bend of required degree(a) 100mm dia
2
361
723.56
... More
Providing & fixing Plane sand cost iron S & S bend of required degree(b) 75mm dia
2
289
578.68
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.(a) 100mm dia
2
478
957.4
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.(b) 75mm dia
2
404
809.38
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.(c) 50mm dia
2
325
650.8
... More
Providing & fixing of C.I. Manhole cover of 600x600mm size with frame 6x38 kg.
228
145
33201.36
... More
Contructing circular soak pit 2.5m internal diameter and 3m effective depth including excavation disposal of surplus earth refling it with coarse aggregate and RCC Slab on top 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) with 450mm dia manhole cover and frame complete as required as per the standard design.
2
20656
41313.6
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diameter
8
901
7213.84
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.
100
544
54426
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
100
620
62093
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.06
1161
8196.94
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.06
1182
8351.34
... More
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.06
1182
8351.34
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
4.24
1556
6601
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.(a) Pipes 80mm to 300mm diameter.
190
270
51452
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.(a) 150mm diameter S.W. Pipe
80
535
42805.6
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.(b) 200mm diameter S.W. Pipe
20
746
14924
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.(a) 150mm diameter S.W. Pipe
80
571
45715.2
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.(b) 200mm diameter S.W. Pipe
20
671
13434.4
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware.
5
5010
25052.3
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap.
5
1445
7225.5
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete(a) 32mm dia Felxible pipe
5
91
459.65
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.(b) 40mm dia Felxible pipe
5
91
459.65
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required(a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern
4
4812
19251.92
... More
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
4.5
3115
14021.42
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
12
1236
14838.12
... More
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge15mm nominal bore
5
268
1342.5
... More
Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per the direction of Enginer-in-charge.
5
795
3978.8
... More
Providing and fixing CP Brass Single lever telephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge.(a) 15mm dia nominal dia.
2
5337
10674.88
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.0 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]-Make-JAQUAR ALD-565
5
1115
5575.25
... More
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore-ESSCO SQT 526AKN
16
1253
20055.52
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893118.53.1 15 mm nominal bore
48
441
21198.72
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190gms.
12
545
6542.16
... More
Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws- Make-ESSCO AEC-1131
12
707
8489.76
... More
Supply and fixing of UPVC SWR Pipe type B conforming to IS-13592n including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar conforming to IS -14735. Also including excavation of trenches cutting of walls and holes and repairing the walls, floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, Tee and Y-Tee including supply of all ,material labour and T&P required for proper completion of work.(a) 110mm dia OD.
211
450
94950
... More
Supply and fixing of UPVC SWR Pipe type B conforming to IS-13592n including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar conforming to IS -14735. Also including excavation of trenches cutting of walls and holes and repairing the walls, floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, Tee and Y-Tee including supply of all ,material labour and T&P required for proper completion of work.(b) 90mm dia OD.
120
380
45600
... More
Supply and fixing of UPVC SWR Nahani trap size 100/75, 110/90mm conforming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125mm dia heavy duty C.P. brass jali.
8
910
7280
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(a) 110mm
6
229
1376.1
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.(a) 110mm
10
285
2855.3
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
6
65
390.12
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)Exposed on wall(a) 25mm dia nominal bore
480
273
131184
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)Exposed on wall(b) 32mm dia nominal bore
395
337
133225.6
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)Exposed on wall(c) 40mm dia nominal bore
375
432
162371.25
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.Concealed work, including cutting chases and making good the walls etc.(b) 20mm dia nominal bore
320
413
132291.2
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.(a) 15mm nominal bore
24
75
1804.08
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore
12
389
4676.76
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore
12
614
7372.68
... More
Providing and fixing gun metal gate valve with wheel of approved quality.(a) 20 mm dia nominal bore
10
415
4152.2
... More
Providing and fixing gun metal gate valve with wheel of approved quality.(b) 25mm dia nominal bore
15
478
7179.45
... More
Providing and fixing gun metal gate valve with wheel of approved quality.(c) 32mm dia nominal bore
20
530
10606
... More
Providing and fixing gun metal gate valve with wheel of approved quality.(d) 40mm dia nominal bore
10
635
6352.7
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete(a) 20 mm nominal bore
4
355
1422.64
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete(b) 25 mm nominal bore
4
356
1427.4
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
8
16920
... More
Supply and fixing of UPVC SWR Pipe type B conforming to IS-13592n including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar conforming to IS -14735. Also including excavation of trenches cutting of walls and holes and repairing the walls, floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, Tee and Y-Tee including supply of all ,material labour and T&P required for proper completion of work(b) 160mm diameter
20
780
15600
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.(a) 110mm diameter S.W.R. Pipe
70
741
51932.3
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.(b) 160mm diameter S.W.R. Pipe
20
907
18146
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
2102
8410.4
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg)With FPS bricks of class designation 75.(i) For Sewer Line
6
9820
58923.3
... More
Point Wiring :Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backalite sheet etc.complete in all respect as directed including matching colour wash.
210
610
128100
... More
Wiring point for two ways light point with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box and two number two ways piano type switches & ceiling rose/angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc., complete in all respect,as directed, including matching colour wash.
75
986
73950
... More
Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet,etc.complete in all respect,as directed, including matching colour wash.
85
671
57035
... More
Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box, piano type switch & socket etc.complete in all respect, as directed, including matching colour wash.
25
327
8175
... More
Wiring point for Exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductor cable as earth continuity wire , GP box and 15 amp piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backelite sheet etc.complete in all respect, as directed, including matching colour wash.
6
893
5358
... More
Supply fixing & concealing of PVC conduit in the wall including cutting of brick laying of conduit & fixing it with MS hooks & then plastering.with cement, sand,mortar finished to the level,with matching colour wash including cost of proper thrading of conduit and providing necessary socket ,bend & chucknuts,as directed by engineer incharge with the supply of material labour and T&P required for proper completion of work. Size 20 mm dia (2 mm) thick PVC Conduit
515
62
31930
... More
Wiring point for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable. (drawn through existing concealed PVC conduit) and ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge.
25
214
5350
... More
Add for light /fan point with moduler type switch in place of piano type switch.
295
44
12980
... More
Add for 2 way light point with moduler type switch in place of piano type switch.
75
165
12375
... More
Add for plug point with moduler type switch in place of piano type switch.
50
83
4150
... More
Add for HPMV/Exhaust Fan point with moduler type switch in place of piano type switch.
6
47
282
... More
Submains (Cooper Wires) :Supply & wiring of submains with 2 nos.1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with 1 no. 1 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
928
105
97440
... More
Supply & wiring of submains with 2 nos.2.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with 1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
650
121
78650
... More
Supply & wiring of submains with 2 nos.4 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
800
149
119200
... More
Supply & wiring of submains with 2 nos.6 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 4 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
850
204
173400
... More
Supply & wiring of submains with 4 nos. 6 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
650
360
234000
... More
Supply & wiring of submains with 4 nos.10 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 2 no. 6 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect.
450
505
227250
... More
Lighting Fixtures (Lights/Fans) :Supply & fixing of Batton/Angle holder including making connection etc. as required.
20
60
1200
... More
Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA
4
1870
7480
... More
Supply & fixing of recess mounting round 24 to 32 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA
50
3500
175000
... More
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
88
1190
104720
... More
Supply and fixing of water tight oblong 10 Watt LED bulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. CAT. - AAA
2
1400
2800
... More
Supply and fixing of Single light Wall Bracket on matching M.D.F.E.G. Board base etc.Complete in all respect. CAT. - AAA
2
1650
3300
... More
Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light)
2
1850
3700
... More
Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.BEE 5 Star rated-1200 mm sweep
60
1800
108000
... More
Armoured Cables (Cable/Gland/Lug) :Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size. size 16 sq mm x 4 core
250
343
85750
... More
Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer-incharge. for cable. size 16 sq mm x 4 core
10
87
870
... More
Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. for cable size 16 sq mm
40
21
840
... More
Earthing Work :Supply and burying of Safe Earthing Electrod T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified.
2
11700
23400
... More
Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
50
90
4500
... More
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows :Main L.T. Panel Phase to phase - minimum 20mm Phase to neutral-minimum 15mm
1
550000
550000
... More
DBs & MCBs :Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A
58
260
15080
... More
Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. CAT A
40
1780
71200
... More
Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A
20
1790
35800
... More
Supply and fixing of 40 Amp. FP MCB (10 KA) C Curve. CAT A
20
2275
45500
... More
Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A
20
2290
45800
... More
Supply and fixing of 100 Amp. FP MCCB (25 KA) Thermal Magnetic release CAT A
10
8140
81400
... More
Supply and fixing of surface/Flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
4
3610
14440
... More
Supply and fixing of surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
2
4370
8740
... More
Supply and fixing of surface/Flush mounting 8 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
5210
5210
... More
Supply and fixing of surface/Flush mounting 4 ways VTPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
8560
8560
... More
Miscellaneous Items :Supply and Fixing of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules
2
85
170
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
60
140
8400
... More
Supply and Fixing of shock treatment chart prescribed as per I.E. Rules.duly framed with glass and supported from back with hard board or shoft board with supply of all material ,labour,T&P for proper completion of work.
1
305
305
... More
Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules.
2
2550
5100
... More
Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work.
20
625
12500
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
60
150
9000
... More
Electronic Items :Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
60
517
31020
... More
Telephone/TV Outlet Sockets & Cables etc. :Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6
118
713.4
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
120
30
3663.6
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
270
45
12363.3
... More
Supplying and drawing Co axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.
160
37
6041.6
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
32
803.25
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 1 or 2 Module
12
106
1282.08
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 3 Module
25
121
3032.75
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 4 Module
22
126
2792.46
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 6 Module
2
146
292.42
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 8 Module
2
169
339.02
... More
Supplying and fixing following Modular base & cover plate on existing modular metal/GP boxes etc. as required. 12 Module
10
218
2185.1
... More
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for AC Power Point/MCB Point)
2
584
1168.06
... More
Non-Schedule Items:Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect.
10
280
2800
... More
Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect.
6
2088
12528
... More
Supply & Fixing of LAN socket outlet modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. Complete in all respect.
6
599
3594
... More
Supplying, installation, testing & commissioning of
heat detector operating at 54/57 degree centregrate
with rate of rise cum fixed temperature(dual
thermistor) type with mounting base complete with all
connection etc. as required.
41
860
35275.58
... More
Supplying, installation, testing & commissioning of
smoke detector operating with builtin LED and
mounting base complete with all connection etc. as
required.
41
926
37976.66
... More
Supplying, installation, testing & commissioning of
Manual call Boxes of MS constuction in surface/recess
with stainless steel chain & hammer assembly
complete with glass and push button etc. as required.
9
380
3427.11
... More
Supplying, installation, testing & commissioning
responce indicator on surface/recess MS box having
two LEDs metallic cover complete with all connections
etc. as required.
9
157
1417.14
... More
Supplying, installation, testing & commissioning fire
alarm sounder with facility to make announcement,
mounted in M.S. box(16 SWG) with hinged cover plate
& suitable for operation with amplifier i/c line
matching trasformer etc. complete as required.
9
447
4027.14
... More
Supplying, installation, testing & commissioning fire
alarm sounder with facility to make announcement,
mounted in M.S. box(16 SWG) with hinged cover plate
& suitable for operation with amplifier i/c line
matching trasformer etc. complete as required.
9
727
6543.27
... More
Supplying & laying of 2X1.5 sqmm fire alarm
armoured cable, 600/1000V rated with annealed
copper conductor having XLPE insulation, steel wire
armouring & FRLS outer sheath complete as required.
540
138
75049.2
... More
Supplying & laying 25 mm dia MS flexible pipe with
PVC coating along with all ancillaries and accessories
like coupler etc. as required.
450
42
19161
... More
Supplying, installation, testing & commissioning
sector panel suitable for following zones, complete
with visual indications for short circuit fault, open
circuit fault, fire condition and all other standard
facilityes as per IS:2189 with mimic diagram for all
area/zone covered, complete with all connections,
interconnections as required.
4 Zone
9
7122
64102.14
... More
Supplying, installation, testing & commissioning of
main control and indicating panel made out SWG MS
sheet to accommodate the following items duly
powder coated in approved colour with louvers for
ventilation, locking arrangement, audio and visual
indication for fire alarm and public address system,
monitoring system including connections,
interconnections etc complete as required.
6 Zone panel for fire alarm system
100 Watt amplifier racks suitable for operation on
230V AC/24VDC supply confirming to IEC-268-3
complete with all accessories as required-2 Nos.(one to
act as standby)
Talk back master station with LED PTT(press to talk)
push button for operation on 230V AC/24 V DC
supply confirming to IEC-268 for simplex mode of
operation/communication suitable for 20 Nos. talk
back unit-1 set.
Annoucement control desk suitable for selection of
different zones selectively and ON ALL CALL switch
with visual indication etc. complete as required-1set.
Amplifier change over switch for inter changing
amplified-1 No.
Monitor panel for loudspeaker complete with output
selector, ON/OFF switch,fuse,visual indications etc.
complete as required-1 No.
Gooseneck microphone with stand and ON/OFF
switch-1 No.
Main ON/OFF switch,fuse indication lamps, DC and
AC voltmeters & ammeters, terminal blocks etc.
complete as required-1 set.
Battery charger trickle cum boost to take complete
load of fire alarm & PA system complete with all
accessories including providing & fixing of 2 nos.12
volt, 60 AH each sealed maintenance free bateries-1
set.
2
39137
78274.76
... More
Supply, Installation, Testing and Commissioning of
electronic siren with suitable audible range of 1 k.m.
approximately 4 watt.complete in all respects.
1
9550
9550
... More
Supply/Fixing of self illuminated "EXIT" signage
made out from not less than 4 mm of transparent
acrylic sheet of 300 x 150 mm size with self illuminated
plastic words of 100 mm height suspended from
ceiling by means of M.S. chain or fixed of the walls as
required and as directed at site..(MAKE : Agni
Suraksha (ASES) / Securiton-aka /System Sensor)
36
4250
153000
... More
Providing, laying, testing & Commissioning of 'B'
class heavy duty MS pipe confirming to IS 1239
including welding, fittings like elbows,tee,
flanges,tapers,nut bolts, gaskets etc. and fixing the
pipe on the wall/ceiling with suitable clamp/support
frame and painting with two or more coats of syntetic
enamel paint of required shade complete as required:
100 mm dia
50
1380
69007.5
... More
Supplying & fixing single headed internal yard
hydrant valve with instantaneous Gunmetal/Stainless
Steel coupling of 63 mm dia with cast iron wheel, ISI
marked, confirming to IS 5290(type A) with blank
Gunmetal/Stainless Steel cap and chain as required:
Single headed Gunmetal
2
6142
12284.76
... More
Supplying, fixing, testing & commission of butterfly
valve of PN 1.6 rating with bronze/gunmetal seat
duly ISI marked complete with nuts, bolts, washers,
gaskets confirming to IS 13095 of following sizes as
required:
100 mm dia
2
5355
10711.8
... More
Providing, installation, testing and commission of nonreturn
valve of following sizes confirming to IS: 5312
complete with rubber gaskets GI bolts, nuts, washers
etc as required:
100 mm dia
2
8876
17753.94
... More
Supplying & fixing orifice plate made out of 6 mm
thick stainless steel(grade 304) with orifice of required
size to be fitted between flange & landing valve of
external and internal hydrants to reduce pressure at
the outlet to the level of 3.5 kg/cm2 complete as
required:
4
1061
4244.88
... More
ProvidiSupplying & fixing 63 mm dia, 15m long RRL
hose pipe with 63 mm dia male and female couplings
duly bound with GI wire, rivets etc. confirming to IS
636(type-A) as required:
Gun Metal
9
4179
37611
... More
Supplying & fixing First-aid hose Reel with MS
construction spray painted in post office
red,conforming to IS 884 complete with the following
as required.
20 mm nominal internal dia water hose
thermoplastic(Textile reinforced) type-2 as per
IS:12585
20 mm nominal internal dia gun metal globe valve &
nozzle.
Drum and brackets for fixing the equipments on wall.
Connections from riser with 25 mm dia stop gun metal
valve & M.S. Pipe and socket.
30 m
9
6969
62721.18
... More
Supplying & fixing 63 mm dia gun metal short branch
pipe with 20 mm nominal internal diameter size
nozzle confirming to IS:903 suitable for instantaneous
connection to interconnect hos pipe coupling as
required.
Gun Metal
9
1940
17467.92
... More
Providing & fixing of pressure switch in M.S. pipe line
including connection etc as required.
9
1241
11177.73
... More
Supply & fixing of fire extinguisher, ABC Type 6.00
kg. capacity(ISI Marked IS:15683 & TAC approved)
comlete with initial charge and wall bracket, along
with supply of all materials and labour for proper
completion of work.PWD-2018
4
9100
36400
... More
Supply & fixing of CO2 type fire extinguisher, 6.5 kg.
capacity(ISI Marked IS:2878 & TAC approved)
comlete with initial charge and wall bracket, along
with supply of all materials and labour for proper
completion of work.PWD-2018
4
19900
79600
... More
Providing & suppling hydro pneumatic pump ISI approved as per design site requirement & instructions of engineer-in-charge.
1
190000
190000
... More
Providing & suppling jockey pump ISI approved as per design site requirement & instructions of engineer-in-charge.
2
75000
150000
... More
Supplying and instalation testing and commisioning of air condition 5 star 1.5 ton inverter type with copper pipe & drain pipe complete.
8
64830
518644
... More
Supplying and instalation testing and commisioning of fresh air fan (wall fan).
8
2334
18678
... More
Dias setup for Seminor hall including wooden 1 nos.dias chair 6 nos,& dias table. 3 nos.Hi-back chair for dias
6
10381
62288.16
... More
Dias setup for Seminor hall including wooden 1 nos.dias chair 6 nos,& dias table 3 nos.Dias table 3 nos.
3
12711
38135.58
... More
Dias setup for Seminor hall including wooden 1 nos.dias chair 6 nos,& dias table 3 nos.Podium
1
50000
50000
... More
Seminor chair (Student / Training Room Chair, PU Arm, PLPB Folding Writing Pad,
Book Trey Under Seat,
Powder Coated Pipe Frame,
Fabric Tapestry, Marino 10002 Top Colour,
Writing Pad Size : 535 X 300 X 18 mm Thick)GST-820
120
7500
900000
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
55
181
9979.2
... More
Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.
15
100
1512
... More
Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot,
90
148
13336.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%