Uttar Pradesh Housing And Development Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Feb 2024
Closing Date5 Mar 2024
Tender AmountRefer Documents
Costs
EMD
₹ 18,20,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPHDB_895251_1Bid Award Id
ViewTender No
267/M-10/25 Dt 05.02.2024Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 400 kg /cum instead of 330 Kg/cum
(In Plinth Beam/Band)
73.03
536544
7346.91
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 400 kg /cum instead of 330 Kg/cum
(In slabs)
445.52
3389654
7608.31
... More
As in item no. 5 above but for beams (Using M-25 Mix Concrete)
263.12
2001898
7608.31
... More
As in item no. 4 above but in RCC Raft Foundation and Footing with approved stone ballast. (Using M-25 Mix Concrete)
374.3
2749948
7346.91
... More
As in item no. 4 above but for RCC Columns (Using M-25 Mix Concrete)
100.29
763037
7608.31
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.83
38761
6648.63
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
38.4
324731
8456.54
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
1297.51
373981
288.23
... More
Suspended floors, roofs, landings, balconies and access platform
3354.4
2286124
681.53
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
2301.91
1245908
541.25
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
915.68
646982
706.56
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
202.72
1280610
6317.14
... More
Brick work with bricks of class designation 7.5 (Class-75) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
81.95
429598
5242.2
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.
(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm
(3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
1815.26
344899
190
... More
Filling BY CARTED earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. ( UPTO 8 KM )
1961.59
668902
341
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
33.42
10091
301.97
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
33.42
3589
107.42
... More
Brick work with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
668.95
5196276
7767.81
... More
Brick work with bricks of class designation 7.5 (Class-75) in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
101.48
679192
6692.87
... More
Half brick masonry with bricks of class designation 15 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
88.02
603243
6853.48
... More
Half brick masonry with bricks of class designation 7.5 (Class-75) in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
7.33
52648
7182.55
... More
6 mm cement plaster 1:3 (1 cement : 3 coarse sand (FM 1.50 to 2.00)) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
230.28
67135
291.54
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1679.29
13311731
7927
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 40x40x5 mm or 40x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
M.S or iron work in hold fasts Door/Window/Ventilator
463.2
44430
95.92
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 B and K12 etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4498.74
433318
96.32
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to steel windows by welding
3213.36
517479
161.04
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 40x40x5 mm or 40x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
1014.6
97320
95.92
... More
Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.
-
-
-
... More
(a) Door chaukhats
79
12606
159.57
... More
(b) Window chaukhats
63
10052
159.57
... More
(c) Ventilator chaukhats
23
3670
159.57
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
230.21
69670
302.64
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Coarse sand (FM 1.50 to 2.00)
616.2
194552
315.73
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
6202.79
1566700
252.58
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
3004.42
758856
252.58
... More
12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. (FM 1.50 to 2.00)
2.14
707
330.42
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
4516.25
260226
57.62
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
240.38
375223
1560.96
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60): 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
25 mm thick with 20 mm nominal size stone aggregate
247.44
69815
282.15
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate.
8.4
3792
451.44
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
40 mm wide and 4 mm thick
29.4
1982
67.44
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
1491.82
1703345
1141.79
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand (FM 1.50 to 2.00)), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
111.46
132965
1192.94
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)) :
25 mm thick
155.3
222383
1431.96
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand (FM 1.50 to 2.00)) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
23.38
40463
1730.7
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand (FM 1.50 to 2.00)), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
105.82
85286
805.96
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand (FM 1.50 to 2.00)) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
536.27
499771
931.94
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red (Area of slab over 0.50 sqm)
970.39
3663396
3775.18
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
-
-
-
... More
For Single Leaf
149.27
262506
1758.6
... More
For Double Leaf
13.92
26219
1883.6
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
129.12
43878
339.83
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
On Both side
159.72
112228
702.66
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
12.21
18789
1538.87
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
On Both side
12.21
8579
702.66
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- incharge.
Extruded section profile size 48x40 mm
74.25
14746
198.6
... More
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.
23.63
56512
2391.54
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces
5.04
21501
4266.2
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked stainless steel butt hinges of required size Kiln seasoned and chemically treated hollock wood.
6.78
24180
3566.44
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
With 12 mm mild steel U beading
36.36
25099
690.31
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inside walls)
9121.12
1244576
136.45
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
3562.89
448069
125.76
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work.
405.6
40977
101.03
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
13089.61
1501378
114.7
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
4.0 mm thick glass panes
216.77
169626
782.52
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
541.52
67939
125.46
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.
268.01
34718
129.54
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
1816.21
2248794
1238.18
... More
Construction of drain of size of size 150 x 150 mm along with apron including excavation,base concrete 1:4:8 in thickness of 7.5cm of and brick work in foundation 1:4( 1 cement : 4 coarse sand) and brickwork in half brick thick in foundation 25mm thick cement concrete flooring and base 20mm thick plaster finished with neat cement
298.82
394654
1320.71
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,
(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).0.90m wide
800
454168
567.71
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand (FM 1.50 to 2.00)):
Light shade pigment using white cement
147.99
152499
1030.47
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
67.53
30626
453.53
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
19.37
19370
1000
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
93.6
25963
277.39
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Bend 87.5°
110 mm bend
24
2652
110.51
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
48
13099
272.91
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
2630
219.21
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
25 mm dia
34.2
13210
386.28
... More
Providing and fixing of heavy duty mortise lock with cylendor make-godrej.
2
4398
2199
... More
Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. 300mm x 16mm
63
10027
159.16
... More
Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.
250mm x 16mm
15
2135
142.37
... More
P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 300 mm x 10mm
78
5772
74
... More
P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 250 mm x 10mm
15
925
61.67
... More
Providing & fixing stainless steel handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 125 mm
126
3699
29.36
... More
Providing & fixing stainless steel handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150 mm
30
1057
35.24
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm diasteel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer.
21.3
179092
8408.11
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
10
894
89.41
... More
Providing and laying cement concrete in footing and base for columns. Excluding the cost of centring and shuttering 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
0.2
1454
7272.97
... More
Water Supply & Sanitary Works
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
5
24870
4974.04
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
20
95778
4788.93
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
20
27624
1381.21
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
17
33094
1946.76
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
32mm dia for wash basin
12
1054
87.87
... More
40mm dia for lab sink
9
790
87.87
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
20
23636
1181.84
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
2
14130
7065.11
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040mm bowl depth 250mm
2
10210
5105.02
... More
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
6
2741
456.97
... More
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.
6
742
123.74
... More
Providing and Fixing C.P. brass distrubutor
5
22500
4500
... More
Providing and Fixing of ss rain shower long body.
2
7000
3500
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]
19
28500
1500
... More
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore
10
16000
1600
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.
Internal work - Exposed on wall
-
-
-
... More
20mm dia nominal bore
88
28284
321.42
... More
25mm dia nominal bore
33
13381
405.5
... More
32mm dia nominal bore
165
80891
490.25
... More
40mm dia nominal bore
300
179025
596.75
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including making good the walls etc. Concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall.
-
-
-
... More
15mm dia nominal bore
5
2133
426.63
... More
20mm dia nominal bore
5
2334
466.87
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
15mm dia nominal bore
5
71
14.26
... More
20mm dia nominal bore
93
1589
17.09
... More
25mm dia nominal bore
88
1956
22.23
... More
32mm dia nominal bore
25
668
26.72
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):
-
-
-
... More
20mm dia nominal bore
20
5098
254.9
... More
25mm dia nominal bore
20
6457
322.85
... More
32mm dia nominal bore
20
7189
359.45
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20mm dia nominal bore
415
163983
395.14
... More
25mm dia nominal bore (medium duty)
200
92206
461.03
... More
32mm dia nominal bore (medium duty)
150
81508
543.39
... More
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
... More
32mm dia nominal bore
150
2448
16.32
... More
40mm dia nominal bore
300
5568
18.56
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
15mm nominal bore
52
3736
71.85
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 :
15mm nominal bore
17
6332
372.5
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15mm nominal bore
13
7633
587.23
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 :
15mm nominal bore
114
48120
422.11
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm diameter
3
490
163.43
... More
Providing and fixing gun metal gate valve with wheel of approved quality(screwed end) :
-
-
-
... More
25mm dia nominal bore
6
2744
457.46
... More
32mm dia nominal bore
5
2534
506.86
... More
40mm dia nominal bore
95
57682
607.18
... More
Providing and fixing brass stop cock of approved quality :
-
-
-
... More
15 mm nominal bore
10
2596
259.64
... More
20 mm nominal bore
16
4459
278.71
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore
4
1971
492.78
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats) 25 mm nominal bore
9
3069
341.08
... More
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].
1800
14562
8.09
... More
Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes.
-
-
-
... More
110mm dia P.V.C. pipe (for Internal sewer)
150
91020
606.8
... More
90mm dia P.V.C. pipe (for Internal sewer)
150
80250
535
... More
Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.
a) 150 x 100 mm. size P typeWith With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
16077
2009.64
... More
Constructing brick masonry manhole with M-150 F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
6
56318
9386.35
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
11
4403
400.35
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, includingn consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m up to 1.50 m depth
Pipes 80 mm to 300 mm diameter
40
10353
258.83
... More
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 coarse sand) including testing of joints etc. complete.
-
-
-
... More
100mm diameter
10
3260
326.05
... More
150mm diameter
30
15342
511.41
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
-
-
-
... More
100mm dia SW pipe
10
7090
709.09
... More
150mm dia SW pipe
30
26015
867.19
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
100mm dia centrifugally cast iron S & S pipe.
53
45996
867.85
... More
75mm dia centrifugally cast iron S & S pipe.
33
28766
871.71
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
... More
100mm
10
4575
457.54
... More
75mm
8
3094
386.79
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
for 100mm dia pipe.
2
533
266.69
... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
100mm inlet & 75mm outlet.
6
8710
1451.74
... More
Providing & fixing cast iron collar.
-
-
-
... More
100mm dia.
8
2724
340.56
... More
75mm dia.
4
1064
266.11
... More
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
... More
100mm
7
2932
418.99
... More
75mm
8
2296
287.02
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
100mm
4
2073
518.32
... More
75mm
6
2305
384.26
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion, (i) Single socketed pipes.
110 mm diameter
28
7766
277.39
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Bend 87.5°
110 mm bend
16
1768
110.51
... More
Shoe (Plain)
110 mm Bend
16
1550
96.91
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
48
13099
272.91
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8
1753
219.21
... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
10
800
80
... More
Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.PARRYWARE C9948
3
2400
800
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]
1
500
500
... More
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore
4
5600
1400
... More
Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws
4
3200
800
... More
Providing & fixing Jaquar make C.P. brass bottle trap.
3
3150
1050
... More
Providing and fixing G.I Inlet fitting with 2 inlets 75 mm size fabricated from 100 mm dia G.I pipes(approx. length=150mm to 300mm) and welded G.I sockets, fixed to CI trap with lead caulked joint and set in cement concrete as per standard drawing including cost of Bitumastic paint complete.
3
2400
800
... More
Electrical Works Wiring Points
Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, Modular type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
420
381007
907.16
... More
Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way Modular type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
23
27572
1198.81
... More
Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire,Modular type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
299
271240
907.16
... More
Wiring point for exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire,Modular type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
3
2721
907.16
... More
Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and Modular type switch & socket etc., complete in all respects as directed, including matching color wash.
32
29029
907.16
... More
Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and Modular type bell push or 2 pin socket etc. complete in all respect with Modular Box & Cover plate. etc on surface as directed including matching colour wash.
4
3628
907.16
... More
Supply and laying of 25mm dia heavy guage 16 SWG (1.5 mm thick) PVC conduit complete with bends and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting and plastering but heavy duty (2mm thick) PVC conduit of 25 mm etc, complete in all respect.
550
61204
111.28
... More
Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
4758
1004223
211.06
... More
Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 4.0 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
650
166621
256.34
... More
Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 6.0 Sqmm FRLSH PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.
480
161721
336.92
... More
Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia PVC conduit along with two numbers 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire including matching colour wash etc. complete in all respect.
450
347094
771.32
... More
Supply and wiring of 4 number 16 sq. mm. PVC insulated 1100 V grade single core Copper conductor cable in 40 mm dia PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 6 sq mm single core Copper conductor cable as earth continuity wiredrawn in coudit including matching colour wash etc, complete in all respect.
150
157141
1047.61
... More
Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.
850
83504
98.24
... More
INSTALLATION OF LIGHT FIXTURES AND FANS
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
114
24147
211.82
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
16
5525
345.37
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
113
236760
2095.23
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
114
19304
169.34
... More
Supply and fixing of two module stepped type electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
119
33700
283.2
... More
Supply & fixing of Recess mounting round 10 Watt cut out min 125mm Height Min 40mm, LED Down lighter having with heat sink, diffuser die cast aluminium housing with heat sink,diffuser/Reflector and driver set, suitable for 24 Hr. Continuous Operation, complete in all respect.(CAT: AAA)
58
78300
1350
... More
Supply & fixing of Recess mounting round 18 Watt cut out min 125mm, Height Min 40mm, LED Down lighter having with heat sink, diffuser die cast aluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24 Hr. Continuous Operation, complete in all respect.(CAT: AAA)
58
108460
1870
... More
Supply & fixing of LED Tube Light witH Metal heavy duty Box type batten light fitting 1 x 22 watt suitable for upto 1X22W LED Polycarbonate tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
81
96390
1190
... More
Supply & fixing of LED Tube Light witH Metal heavy duty Box type batten light fitting 2 x 22 watt suitable for upto 2X22W LED Polycarbonate tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
86
153940
1790
... More
Supply & fixing of water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 as above protection. Complete in all respect. (CAT: AAA)
15
21000
1400
... More
Supply & fixing of Single LED light Wall bracket 3 to 6 watt on matching M.D.F.E.G.Board base etc.complete in all respect. (CAT: AAA)
12
31200
2600
... More
Supply of 14W LED Mirror Light Similar to Crompton Greaves Cat Ref. LCL-14-CLD or equivalent.
10
22000
2200
... More
Supply & fixing of factory wired HPF box type, flourescent tube light fitting suitable for following fluorescent tube etc. complete as required. [1 X 40]
26
21840
840
... More
Supply and fixing of industrial bulk head fitting of cast aluminium body, having heat resistant glass cover and M.S. galvanized wire guard suitable for and with 9/ 10 w CFL lamps complete in all respect on wall. (BJBE19)
6
4926
821
... More
Supply & fixing of single light, wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.
-
-
-
... More
Cat A
7
11550
1650
... More
DISTIBUTION BOARD
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 Way TPN
2
7634
3817.45
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 Way TPN
2
6279
3139.77
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
36
7073
196.48
... More
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A)
-
-
-
... More
40 Amp. FP MCB (10 KA) C Curve
6
13650
2275
... More
63 Amp. FP MCB (10 KA) C Curve
10
22900
2290
... More
40 Amp. DP MCB (10 KA) C Curve
2
2360
1180
... More
S/F & 5Amp./6/… 32Amp. MCB 9 K.A. / 10 K.A.
16
4160
260
... More
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.
23
14375
625
... More
S & F sheet steel enclosure surface/Flush mounting fitted with 20Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge.
40
64800
1620
... More
S/F MODULAR BOXES, BASE & COVER PLATE
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2,3,4,6,8,12,24 Module (75mm X 75 mm)
78
118950
1525
... More
S/F MODULAR TYPE SWITCH / SOCKET Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
... More
3 pin 5/6 amp socket outlet
23
2153
93.63
... More
Telephone Socket outlet
2
227
113.59
... More
Data Socket outlet
16
7200
450
... More
Supply and fixing of power plug with 15A/240 V flush type switch and 6 pin 20A/10A 250 V flush type universal socket complete with GI box modular tyepe inluding supply of all material, labour T&P etc. required for proper completion of work.
16
5440
340
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
40
16669
416.74
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
11926
596.33
... More
MISCELLENEOUS
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
-
-
-
... More
300mm sweep.
15
30000
2000
... More
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
-
-
-
... More
375mm sweep.
1
2150
2150
... More
Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complite in all respect
6
4860
810
... More
Supply and fixing of call bell of approved make
2
350
175
... More
S/laying of G.I pipe with required socket underground at the depth of 750 mm below complete in all respect.
-
-
-
... More
100 mm dia
90
135000
1500
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
1
158
158.87
... More
EARTHING SYSTEM
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No. 8 to 10 SWG G.I. wire in 15 mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
6
34407
5734.62
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
150
16578
110.52
... More
Supply and laying of 32mmX6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
30
4500
150
... More
Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
350
70000
200
... More
CABLES
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.
-
-
-
... More
25 sqmm 3.5 core
350
130550
373
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge
-
-
-
... More
25 sqmm 3.5 core
40
4920
123
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
... More
10 sqmm 2 core
10
2920
292
... More
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
-
-
-
... More
25 Sq.mm
10
270
27
... More
MAIN L.T. PANEL
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
-
-
-
... More
Main L.T. Panel Incoming :
1 No 800 Amp. 4P ACB of 50 KA Electrically operated Draughout Type Microprocessor Based O/L,S/C, & E/F Release
Metering :
1 No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
1 No. (0-800A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
ONE (1) Set of Phase Indication Lamp.
Bus Bar :
1 No. 1000 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on each outgoing to be provided.
200 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 1 No
100 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 1 No
63 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 3 No
40 Amps FP MCB of 10KA (Ics=Icu) Breaking Capacity- 35 No
2 NO. Space Provision for MCB
1
550000
550000
... More
Street Light Panel
Incoming :
40 Amps FP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No
Metering :
ONE (1) Set of Phase Indication Lamp.
Bus Bar :
1 No. 100 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
1 No. 32A MCB with 24Hr Calibrated time switch for automatic operation of supply, Auto/Manula switch, 32A TP Contactor for operation of the outgoing supply through the time switch with 6 Nos. 16A TP 10kA MCB's as outgoing
200 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 1 No
100 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 1 No
63 Amps FP MCCB of 25KA (Ics=Icu) Breaking Capacity- 3 No
40 Amps FP MCB of 10KA (Ics=Icu) Breaking Capacity- 35 No
2 NO. Space Provision for MCB
1
150000
150000
... More
EXTERNAL LIGHTING
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including thecost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
7
115500
16500
... More
Supply and fixing of LED Street light Fitting having die cast aluminium bodyand diffuser with driver setSupply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects.
7
86100
12300
... More
Fire Fighting Works
Fire Detector & Fire Alarm System
Supplying, installation, testing & commissioning of heat detector operating at 54/57 degree centregrate with rate of rise cum fixed temperature(dual thermistor) type with mounting base complete with all connection etc. as required.
41
33700
821.97
... More
Supplying, installation, testing & commissioning of smoke detector operating with builtin LED and mounting base complete with all connection etc. as required.
41
36281
884.91
... More
Supplying, installation, testing & commissioning of Manual call Boxes of MS constuction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
9
3274
363.79
... More
Supplying, installation, testing & commissioning responce indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
9
1353
150.43
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box(16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required.
9
3847
427.49
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box(16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required.
9
6251
694.57
... More
Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
540
71695
132.77
... More
Supplying & laying 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
450
18306
40.68
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilityes as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
4 Zone
9
61240
6804.49
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
6 Zone panel for fire alarm system
100 Watt amplifier racks suitable for operation on 230V AC/24VDC supply confirming to IEC-268-3 complete with all accessories as required-2 Nos.(one to act as standby)
Talk back master station with LED PTT(press to talk) push button for operation on 230V AC/24 V DC supply confirming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit-1 set.
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required-1set.
Amplifier change over switch for inter changing amplified-1 No.
Monitor panel for loudspeaker complete with output selector, ON/OFF switch,fuse,visual indications etc. complete as required-1 No.
Gooseneck microphone with stand and ON/OFF switch-1 No.
Main ON/OFF switch,fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required-1 set.
Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free bateries-1 set.
2
74780
37390.18
... More
Supply, Installation, Testing and Commissioning of electronic siren with suitable audible range of 1 k.m. approximately 4 watt.complete in all respects.
1
9550
9550
... More
Supply/Fixing of self illuminated "EXIT" signage made out from not less than 4 mm of transparent acrylic sheet of 300 x 150 mm size with self illuminated plastic words of 100 mm height suspended from ceiling by means of M.S. chain or fixed of the walls as required and as directed at site..(MAKE : Agni Suraksha (ASES) / Securiton-aka /System Sensor)
36
153000
4250
... More
Internal Hydrant System
Providing, laying, testing & Commissioning of 'B' class heavy duty MS pipe confirming to IS 1239 including welding, fittings like elbows,tee, flanges,tapers,nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of syntetic enamel paint of required shade complete as required:
100 mm dia
50
65926
1318.53
... More
Supplying & fixing single headed internal yard hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290(type A) with blank Gunmetal/Stainless Steel cap and chain as required:
Single headed Gunmetal
2
11736
5868.17
... More
Supplying, fixing, testing & commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes as required:
100 mm dia
2
10233
5116.8
... More
Providing, installation, testing and commission of non-return valve of following sizes confirming to IS: 5312 complete with rubber gaskets GI bolts, nuts, washers etc as required:
100 mm dia
2
16961
8480.67
... More
Supplying & fixing orifice plate made out of 6 mm thick stainless steel(grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required:
4
4055
1013.84
... More
ProvidiSupplying & fixing 63 mm dia, 15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636(type-A) as required:
Gun Metal
9
35931
3992.44
... More
Supplying & fixing First-aid hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipments on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
30 m
9
59921
6657.9
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hos pipe coupling as required.
Gun Metal
9
16688
1854.24
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc as required.
9
10678
1186.53
... More
Fire Extinguisher
Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
32
291200
9100
... More
Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
32
636800
19900
... More
Fire Pumps
Supply, Installation, Testing and Commissioning of hydro pneumatic pump ISI approved including cost of all labour, material and T&P required for proper completion of the work.
1
390000
390000
... More
Supply, Installation, Testing and Commissioning of jockey pump ISI approved including cost of all labour, material and T&P required for proper completion of the work.
2
250000
125000
... More
RECHARGE WELL
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
-
-
-
... More
In all kind of soil upto 1.5m depth
13.14
1714
130.46
... More
In all kind of soil upto 1.5m to 3.0m. depth
13.14
2057
156.55
... More
In all kind of soil upto 3.0m to 4.5m. depth
13.14
2468
187.86
... More
In all kind of soil upto 3.0m to 4.5m. depth
13.14
2962
225.43
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
12.36
61884
5006.82
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
120
779084
6492.37
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
7.62
50662
6648.63
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
897.24
71124
79.27
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
296.76
89811
302.64
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
50
20017
400.35
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
M.D. -10- Circular shape 560mm internal diameter
12
14779
1231.64
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level.
Drilling of 300mm dia bore hole manually.
120
62424
520.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
150 mm nominal size dia
120
71217
593.48
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
21.18
23503
1109.7
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
21.18
23946
1130.61
... More
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
21.18
23946
1130.61
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
12.72
18927
1488.01
... More
DRAINAGE NETWORK
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
31935
7983.86
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, includingn consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m up to 1.50 m depth
Pipes 80 mm to 300 mm diameter
150
38824
258.83
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
150mm diameter
150
76711
511.41
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
150mm diameter
150
130078
867.19
... More
SEPTIC TANK & SOAK PIT OF 100 USER FOR ACADEMIC BLOCK BUILDING
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
69.4
9053
130.46
... More
Providing and laying cement concrete in footing and base for columns. Excluding the cost of centring and shuttering 1:2:4 (1 Cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate 40 mm nominal size)
4.21
30619
7272.97
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
19.56
126990
6492.37
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8.3
55183
6648.63
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Suspended floors, roofs, landings, balconies and access platform
28.04
19110
681.53
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
7.82
61989
7927
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
72.2
21850
302.64
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
16
6405
400.35
... More
S.W. tee 160x15x150mm.
2
500
250
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
50mm dia sand cost iron S & S pipe
3
2380
793.53
... More
75mm dia centrifugally cast iron S & S pipe.
2
1743
871.71
... More
100mm dia centrifugally cast iron S & S pipe.
2
1735
867.85
... More
Providing & fixing sand cast iron terminal guard
-
-
-
... More
100mm dia
1
305
305.94
... More
75mm dia
1
244
244.44
... More
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
... More
100mm
2
837
418.99
... More
75mm
2
574
287.02
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
... More
100mm
2
915
457.54
... More
75mm
2
773
386.79
... More
50mm dia
2
566
283.21
... More
Providing & fixing of C.I. Manhole cover of 600x600mm size with frame 6x38 kg.
651.86
52148
80
... More
Contructing circular soak pit 2.5m internal diameter and 3m effective depth including excavation disposal of surplus earth refling it with coarse aggregate and RCC Slab on top 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) with 450mm dia manhole cover and frame complete as required as per the standard design.
2
34948
17474.02
... More
SEPTIC TANK & SOAK PIT (5.00 X 2.00 X 3.00) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
-
-
-
... More
From 0.00 mt to 1.50 mt
56.44
7363
130.46
... More
1.50mt to 3.0 mt
51.86
8118
156.55
... More
3.0 mt to 4.50 mt
13.82
2596
187.86
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5.54
27737
5006.82
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
4.54
38392
8456.54
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
28.54
185292
6492.37
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3.56
28220
7927
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 Coarse sand (FM 1.50 to 2.00))
121.9
36891
302.64
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
25 mm thick with 20 mm nominal size stone aggregate.
20
5643
282.15
... More
Providing & fixing soil, waste and vent pipes.
75mm dia Sand cast iron S&S pipe as per IS: 1729
4
3071
767.89
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
36
14412
400.35
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
34948
17474.02
... More
C.C. Road
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
1150.99
150158
130.46
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
475
2378239
5006.82
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
209
1320282
6317.14
... More
Providing and laying cement concrete in footing and base for columns. Excluding the cost of centring and shuttering 1:2:4 (1 Cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate 40 mm nominal size)
310
2254620
7272.97
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Using grade ‘A’ sealing compound conforming to IS: 1834.
1567.5
99661
63.58
... More
REPAIR OF INTERNAL BITUMINOUS ROAD
Scarifying matalled (water bound) road surface including disposal of rubbish lead up to 50 m and consolidation of aggregate received from scarifying with power road roller of 8 to 10 tonne capicity.
860
21052
24.48
... More
Surface dressing on new surface with paving bitumen of grade A-90 / S-90 of approved quality using 2.25 kg of bitumen/ sqm with 1.65 cum of stone chipping 13.2 mm nominal size / 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete.
860
142441
165.63
... More
Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as per specification.
On W.B.M. @ 0.75 Kg / sqm
860
38244
44.47
... More
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt
860
147945
172.03
... More
INTERLOCKING TILES ROAD/PATH
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
18.42
2403
130.46
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
95.85
479903
5006.82
... More
Brick work with bricks of class designation 15 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
18.64
117751
6317.14
... More
Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
590
562010
952.56
... More
STORM WATER DRAIN
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
222.5
29027
130.46
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
39.6
198270
5006.82
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00)
94.6
597601
6317.14
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
25 mm thick with 20 mm nominal size stone aggregate
132
37243
282.15
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
664.4
167814
252.58
... More
DISMENTALING OF DAMAGED BOUNDARY WALL Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1263.79
50766
40.17
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
602.06
911669
1514.25
... More
Disposal of waste materials up to a distance of 10.0 Km. from the site complete loading, unloading, labour T&P.
629.18
161825
257.2
... More
CONSTRUCTION OF BOUNDARY WALL
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.
All kinds of soil
662.29
86402
130.46
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (FM 2.20 to 3.60) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.7
253845
5006.82
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
In Beam/Band
62.05
412547
6648.63
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
In raft foundation and footing
165.09
1097622
6648.63
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
34.31
273688
7976.92
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
103.41
653255
6317.14
... More
Half brick masonry with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
275.74
2275286
8251.57
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
283.33
2245956
7927
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00)
1845.86
466227
252.58
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to steel windows by welding
M.S.angle
593.44
95567
161.04
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
645.41
178268
276.21
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
395.64
49636
125.46
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
1845.86
232135
125.76
... More
MS GATE
Supply and fixing M.S. Work in gate 'including all necessary for proper 'completion of the work.
561.6
90440
161.04
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
21.84
2740
125.46
... More
HORTICULTURE WORKS
GRASS PLANTING WORK
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge
150
30970
206.47
... More
SHRUB PLANTING WORKS
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep
40
1685
42.13
... More
Shrubs plants
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
20
3466
173.34
... More
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the
officer-in-charge.
10
6259
625.95
... More
Providing and stacking of Ficus blackii (F.vivion) of height 45-60 cm. with 6- 8 branches healthy foliage in earthen pots of size 25 cm as per direction of the officer-in-charge.
10
1059
105.93
... More
Providing and Displaying Ficus black vivion piller Topiary (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
5
9870
1974.15
... More
Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
15
10833
722.25
... More
Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cm Cement Pot as per direction of the officer-in-charge.
12
16582
1381.91
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
20
3466
173.34
... More
Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.
20
1926
96.3
... More
Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot,
60
8493
141.56
... More
EXTERNAL ELECTRICAL WORKS
Supply and erection of steel tubular pole 9.0 meters long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation, back filling etc. complete in all respects.
10
114770
11477
... More
Supply and erection of 'D' clamps of 50x6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint.
10
2230
223
... More
Supply and fixing of 100mm x 100mm shackle insulator/100mm x 80mm pin insulator including G.I. bolts/spindle nuts etc. complete in all respects.
20
4574
228.71
... More
Supply and fixing of 75mm x 90mm shakle insulator/100mm x 65m pin insulator G.I. bolts/spindle nuts etc. complete in all respects.
10
2072
207.22
... More
Supply and erection of stay set at least 3.5 meters away from the pole complete with galvanised 19mm dia x 1.80 meter long stay rod 30mm x 30mm x 6.3mm anchor plate, thimple, stay clamps, stay insultors, 19mm x 600mm double screw tightner 7/3.15 G.I. stay wire etc. in 1:3:6 cement concrete in all respects.
20
60580
3029
... More
Supply and erection of overhead line with ACSR conductor on pole/service bracket including binding etc. complete in all respects.
150
39450
263
... More
Supply and erection of overhead line with G.I. wire No. 8 SWG to 4 SWG on poles/service bracket including binding etc. complete in all respects.
30
1980
66
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc, complete in all respect.
300
59100
197
... More
Painting of Electric Pole with two coats of Aluminum paint over red oxide primer complete in all respect.
10
3240
324
... More
H.T.CABLES
Supply and laying of 3 core standered aluminium conductor XLPE (cross linked polyethlene ) insulated PVC bedded galvanised flat steel strip armoured cable confirming to I.S 7098 (part-II with latest amendment ) 11KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine rever sand all around and protected with well burnt bricks on sides and on top put across. the armouring of cable shell be properly connected with earth conductor by clamps etc.
70 sqmm 3.0 core
300
274500
915
... More
CABLES
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
... More
6 sqmm 2.0 core
90
24840
276
... More
10sqmm 2.0 core
90
26280
292
... More
16sqmm 4.0 core
70
24010
343
... More
95 sqmm 3.5 core
50
35000
700
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated and armoured served sheathed, under ground cable including rubber ring etc. complete in all respects, the armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge.
-
-
-
... More
10 sqmm 2.0 core
2
160
80
... More
16 sqmm 4.0 core
2
174
87
... More
95 sqmm 3.5 core
2
444
222
... More
Supply and fixing of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per directions of the Engineer-in-charge.
-
-
-
... More
10 sqmm
36
720
20
... More
16 sqmm.
12
252
21
... More
95 sqmm.
4
352
88
... More
Supply and burying of 600x 600x 3.0mm G.I. plate, vestically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead of one no.8 to 10 SWG copper wire in 15mm dia G.I. pipe upto (Switch board from apron Switch board the cost of G.I. pipe and G.I. pipe will be extra) 30mm square C.I. frame with hinged cover, ,masonary housing, alternate layers of charcoal/coke and salt at leat 150mm thick alround etc.as per directions of Engineer-in-charge complete in all respects as per drawing (this will apply for earthing of poles also)
2
21240
10620.41
... More
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
2
10522
5261.09
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
60
6631
110.52
... More
Supplying and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.
60
12000
200
... More
Supply and fixing of led street lighting luminaires single piece cast 'Aluminium' body Suitable for 150 watt S.V. lamp including integral control gear, 175-200 watt lamp on G.I.Pipe bracket complete in all respects.on pole.
10
131900
13190
... More
S/F of 32A 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. board complete in all respects.
6
8640
1440
... More
OVER HEADED TANK 100 KL CAPACITY WITH STAGING OF 20.00 M
Soil testing, Design , excavation & construction of " Intz'' type R.C.C. elevated over head tank of 100 K.L. capacity over staging of 20 mt. measured from G.L. to top of bottom ring beam based on raft foundation i.e. rain proof of approved designs, ventilating column at top of tank with red light arrangement with electricity wire through 20 mm dia conduit pipe. Super structure with 1m balcony with 3 rose of 20mm dia G.I. approved make pipe(medium) railing all arroung the balcony and also on both sides of stair case with 50mmx50mmx6mm and 0.90m heigh (clear) angle loop post fixed at 1m interval . The stair case shall be of spiral type .Red light arrangement and 1.00m wide M.S. gate arrangement at the entrance of stair case including 0.60m wide ladder with proper protection device shall be provide from the way to the roof of tank and internal ladder 0.60m wide from the roof of the tank to the floor inside the tank comprising on M.S. angle iron of 50mmx 50mmx 6mm with on either side 20mm dia M.S. bar fixed at 25 interval with G.I. pipe projected for holding while entering or exit may also be provided and tank roof shall be provided with 75x75 cm manhole cover 6mm thick M.S. plate complete with locking arrangement duly approved including supply of ISI specified make approved pipe sand fixing of D.I. D/F pipes and specials (sluice valve, duck foot bends, bell mouth etc.) and also all fittings required for these pipes inlet outlet, overflow and washout pipe shall be provided below G.L. and apart from column of O.H.T. as follows and as per direction of E/I. (a) Inlet pipe: min. 2.0m apart from apron upto sluice valve chamber (b) Outlet pipe: min.2.0m apart from apron upto sluice valve chamber ( c ) Washout pipe:min. min.2.0m apart from column upto chamber
-
-
-
... More
(d) Also including supply of all jointing materials such as bolts,nuts,rubber,insertion etc also making sluice valve chamber and inlet and wash out pipes as per direction of E/I, also its testing, washing and disinfecting of the tank and proper examitence for 1year. Also making apron with proper drain as per direction of engineer incharge at G.L. from center of overhead to out side upto 4.00m from column around O.H.T. Apron having base concrete 1:4:8 cement, approved coarse sand and 20mm gauge stone grit and 40mm thick, glass strips 35x5mm size including dewatering if required during construction of the tank, roof shall be provided with opening of 75cmx75cm, 6mm thick MS plate manhole cover complete with locking arrangement, lighting conductor as per I.S.I. specification and suitable electric water level indicator figures painted in fluoresence color (RED). This also includes three coats of approved weather proof Paint of approved brand and shade. Exterior paint over and including one coat of cement primer of approved brand (such as apex paint or equivalant as directed by engineer incharge ) over the entire surface of O.H.T.and also i/c painting of all steel members with three coats of superior quality of black japan paint over one coat of red oxide primer. The dia of D.I. D/F pipe inlet 150 mm dia, outlet 200mm dia, overflow 200 mm dia, washout pipe 100mm dia and all sluice valve shall be used (Cost of pipe and specials with fixing are included in rates) i/e letter writing work on O.H.T wall as per direction of E/I. The disposal of surplus earth shall be made within 1.0 km distance inside the project and also making circular drain along apron of application design.
(e) The above rates are inclusive of testing of soil and designing of overhead tank, including its vetting from reputed government engineering institution/ NIT/IIT as per direction of engineer in charge. The construction of safe over head tank as per structural design will be the responsibility of the contractor.
(f) The contractor has to submit soil test report and vetted structural design of over head tank in the office of executive engineer construction division ayodhya-04, ayodhya.
pipes, specials & sluice valve etc . Shall be ISI marked and conferming to relivent IS code.
(g) All DI D/F pipes, specials & sluice valve etc . Shall be ISI marked and conferming to relivent IS code.
1
2400000
2400000
... More
Pump Room & Boring Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil 0.30 m & Above
10.1
1317
130.46
... More
Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand (FM 2.20 to 3.60)) : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation.
0.45
2253
5006.82
... More
Same as above but for under floor.
0.68
3404
5006.82
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
1.41
8164
5790.7
... More
Providing and laying in position specfied grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing & reinforcement. All work up to plinth level.
1:1.5:3 (1 cement,1.2 coarse sand (FM 2.20 to 3.60), 3 graded stone aggregate 20mm. (Nominal size)
0.45
2991
6648.63
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (FM 2.20 to 3.60) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2.28
19280
8456.54
... More
Centering, shuttering inluding strutting, proping etc. & removal of form for.
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
3.88
1118
288.23
... More
Suspended floors, roofs, landings, balconies and access platform.
13.47
9180
681.53
... More
Lintels, beams, plinth beams, girders, bressumers and
cantilevers.
3.88
2100
541.25
... More
Brick work with bricks of class designation 15 (Class-150) in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
4.82
30448
6317.14
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.
(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm
(3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
11.97
2274
190
... More
Filling BY CARTED earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. ( UPTO 8 KM )
2.03
692
341
... More
Brick work with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand (FM 1.50 to 2.00))
6.88
53442
7767.81
... More
Half brick masonry with bricks of class designation 15 (Class-150) in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00))
0.89
7343
8251.57
... More
Steel reinforcment for R.C.C work including strainghtening cutting bending placing in position & binding all complete up to plinth level. Thermo machanically treated bars of grade Fe-500D or more.
4.28
33927
7927
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand (FM 1.50 to 2.00))
48.73
14159
290.58
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand (FM 1.50 to 2.00))
60.2
15205
252.58
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1.35
2107
1560.96
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand (FM 2.20 to 3.60)) : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
18.74
8459
451.44
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand (FM 1.50 to 2.00)), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Area of slab over 0.50 sqm
1.8
6795
3775.18
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand (FM 1.50 to 2.00)), finished with a floating coat of neat cement. 18 mm thick
1.8
875
486.61
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
6.48
3678
567.71
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
1.89
4825
2553.28
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
Ground Floor
13.26
1271
95.92
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Ground Floor
10
1682
168.2
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand (FM 2.20 to 3.60)) : 6 graded stone aggregate 20 mm nominal size).
Ground Floor
36
3749
104.15
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
27
4348
161.04
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading.
Ground Floor
1.44
994
690.31
... More
Fixing of Door, windows / ventilators chaukhats in position.
-
-
-
... More
Door chaukhats
1
159
159.57
... More
Providing & fixing panes of glass with equal or equivalent I.S.I marked quality putty. Brads and springs and including supply of all materials and labour etc complete . 3.8 to 4.7 mm thick.
1.44
1126
782.52
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.
59.18
8075
136.45
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm).
60.2
5172
85.92
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
238.76
27385
114.7
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.
4.73
593
125.46
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
4.2
544
129.54
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
11.97
14821
1238.18
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
6.3
1747
277.39
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend
4
442
110.51
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
4
1091
272.91
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
2
438
219.21
... More
Construction of drain of size of size 150 x 150 mm along with apron including excavation,base concrete 1:4:8 in thickness of 7.5cm of and brick work in foundation 1:4( 1 cement : 4 coarse sand) and brickwork in half brick thick in foundation 25mm thick cement concrete flooring and base 20mm thick plaster finished with neat cement
16.24
21448
1320.71
... More
BORING
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
90
46818
520.2
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
300 MM dia
30
18206
606.89
... More
Supply , assembing , lowering and fixing in vertical position in bore well ERW (Electric Resistance welded ) FE 410 mild steel screwed and socket /plain ended casting pipe of required dia, conforming to IS: 4270, of reputed & approved make including painted with out side surface with two coats of anticorrosive including required hire and labour charges , fitting & accessories etc. all complete , for all depths as per direction of Engineer-in-charge.
-
-
-
... More
150 mm nominal size dia having minimum wall thickness
5.00 mm
90
96367
1070.75
... More
150 mm nominal size dia jalli pipe
30
46354
1545.15
... More
Supplying , filling , spreading & leveling coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts,all complete , for all depths as per direction of Engineer-in-charge.
2.5
2826
1130.61
... More
Development of tube well in accordance with IS: 11189, to establish maximum rate of usable water yield without sand content , with required capicity air compressor , running the compressor for required time till well is fully developed , measuring static level & draw down etc. by step draw down method , collecting water sample & getting tested in approved laboratory , i/c/ disinfection of tubewell, all complete, including hire & labour charges of air compressor , tools & accessories etc. all as per requirement and direction of Engineer-in-charge.
24
19140
797.51
... More
Providing and fixing suitable size threaded mild steel cap or spot weldedplate to the top of bore well housing / casing pipe ,removable as per requirement ,all complete for borewell of .
-
-
-
... More
150 mm nominal size dia
1
181
181.14
... More
Providing and fixing M.S. clamp of required dia to top of housing / casing pipe , of tubewell as per IS:2800 (PART-1) ,including necessary bolts & nuts f required size complete
-
-
-
... More
100 mm nominal size dia
4
5619
1404.88
... More
150 mm nominal size dia
4
5936
1484
... More
Providing and fixing Bail plug /Bottam plug of required dia to the bottam of pipe assembly of tubewell as per IS:2800 (PART-1)
-
-
-
... More
150 mm nominal size dia
1
236
236.67
... More
Supply, installation, testing and commissioning of tubewell motor pump of 500 lit/min discharge w/h. of control panel, support wire etc. complete 7.5 H.P. one emergency pump.
1
80000
80000
... More
Water supply tanker of 5000 litre capicity for boring.
5
8125
1625
... More
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
7500
7500
... More
Providing and fixing C.I. sluice valve . 100 mm nominal bore. Class I
1
3521
3521.53
... More
Providing and lowering G.I. pipes complete with G.I. fittings including trenchingand refilling etc.
50 mm dia nominal bore
36
20166
560.18
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
35 sq. mm 3-1/2 core
42
17724
422
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements