Uttar Pradesh Housing And Development Board Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Energy, Oil and Gas
Eprocure
Opening Date28 Jan 2025
Closing Date24 Feb 2025
Tender Amount₹ 5,55,00,000
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A" Class Approved Electricity Safety License.
Bid Capacity
... View More
To determine the bid capacity required, we look at the provided information. The bid value is Rs. 555.00 Lacs, and there are specific requirements for average annual financial turnover and liquid assets. The average annual financial turnover during the last three years ending 31 March 2024 should be at least 30% of the bid value. 30% of Rs. 555.00 Lacs = Rs. 166.50 Lacs. The liquid assets should be at least 15% of the bid value.
15% of Rs. 555.00 Lacs = Rs. 83.25 Lacs. Additionally, there are experience requirements:
- One similar work costing not less than 80% of the bid amount = Rs. 444.00 Lacs,
- Two similar works each costing not less than 50% of the bid amount = Rs. 277.50 Lacs each,
- Three similar works each costing not less than 40% of the bid amount = Rs. 222.00 Lacs each. Therefore, the bid capacity required can be summarized as follows:
- Average annual financial turnover: Rs. 166.50 Lacs
- Liquid Assets: Rs. 83.25 Lacs
- Experience: - One similar work: Rs. 444.00 Lacs - Two similar works: Rs. 277.50 Lacs each - Three similar works: Rs. 222.00 Lacs each Thus, the bid capacity required for the given tender to bid includes both financial and experience components.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed similar works during the last 7 years. The experience can be in one of the following forms: (i) One similar work costing not less than 80% of the Bid Amount, (ii) Two similar works each costing not less than 50% of the Bid Amount, (iii) Three similar works each costing not less than 40% of the Bid Amount. For a bid amount of Rs. 555.00 Lacs, the values are: 80% of Rs. 555.00 Lacs for one similar work, 50% of Rs. 555.00 Lacs for two similar works, and 40% of Rs. 555.00 Lacs for three similar works. Additionally, the bidder should have an average annual financial turnover of at least 30% of the estimated cost during the last three years for certain projects, and a minimum of 50% of the bid amount as their prior work experience. The estimated cost for certain projects is Rs. 132.45 Crores for Package-I and Rs. 54.73 Crore for Package-II. The values for the bid amount of Rs. 555.00 Lacs are: - 80% of Rs. 555.00 Lacs = Rs. 444.00 Lacs for one similar work, - 50% of Rs. 555.00 Lacs = Rs. 277.50 Lacs for two similar works, and - 40% of Rs. 555.00 Lacs = Rs. 222.00 Lacs for three similar works.
Costs
EMD
₹ 11,10,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_999378_1Bid Award Id
ViewTender No
83/M-6 ED-I/11 Dated 23-01-2025Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://https://upavp.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply & Erection of 33 KV lighting arrestors/post Insulator /C.T. structure made of M.S. channel 100x50mm 9.56kg/mtr. Top of M.S. angle 50x50x6mm 4.5 Kg./mtr. Lighting arrestors/post Insulator are to be mounted on M.S. plate of 200x150x8mm Height of structure as to be 2.8 Mtr. above ground and 1 Mtr. below ground on a 75mm thick cement concrete pad with 1:4:8 cement concrete foundation, making plinth of required height including all fabrication as per direction of Engineer-Incharge.
8
11401
-
... More
Supply & Fixing of 33 KV pin insulator with pin on main Terminal Gantry as per direction of Engineer-Incharge.
12
833
-
... More
Supply & Fixing of 11 KV Disc Insulator 12000 Kg. E/M Strength complete in all respects as per direction of Engineer-Incharge.
48
389
-
... More
Supply & Fixing of 33 KV tension fitting for panther conductor with D-shackle (B & S type) suitable for 12000kg mechanical strength disc insulator set complete in all respects as per direction of Engineer-Incharge.
12
533
-
... More
Supply & Erection of Main Bus bar on bus bar gantry with ACSR Deer & panther conductor including laying, stringing & binding etc. as per UP PWD SOR 2018 S.No. No 627
307
263
-
... More
Supply & Fixing of P.G clamps suitable for panther conductor for jumpering as per direction of Engineer-Incharge.
180
294
-
... More
Supply & Fixing of Earth mat in the switch yard of the sub station for all Electrical Equipments and structure by laying of M.S rod of 32mm dia in 750mm deep trenches and earth electrode 3.0M long of M.S round bar 32mm dia 0.5M below ground level. The work includes bending/flooring of M.S. round bar and connection of all steel structure in switch yard with earth mat by means of M.S strip of size 50x6mm including all labour, materials T & P etc. required for proper completion of the work as per detailed specification of UPPCL.
1
564314
-
... More
Supply & Making suitable earthing of outdoor/indoor structure, Equipments through the earth mat laid in switch yard by means of 50x6mm M.S. strips including all labour, material, T & P etc., required for proper completion of work as per direction of Engineer-Incharge.
1
68830
-
... More
Supply & fixing of 33 KV bus type Isolator with all necessary material required for proper fixing of structure including labour, material, T & P etc. required for proper completion of the work as per direction of Engineer-Incharge.
4
80475
-
... More
Supply & Fixing of 33 KV line isolator of approved quality and make with all necessary material required for proper fixing on structure including labour, material, T & P etc. required for proper completion of the work as per direction of Engineer-Incharge.
2
83805
-
... More
Supply & Fixing of 33 KV lighting arrestor (03 Nos.) of approved quality and make with all necessary material required for proper fixing on structure including material, labour, T & P etc. for proper completion of the work as per direction of Engineer-Incharge.
12
58275
-
... More
Supply & Fixing of 33 KV C.T of approved quality and make with all necessary material required for proper fixing on structure including material, labour, T & P etc. for proper completion of the work as per direction of Engineer-Incharge.
-
-
-
... More
33KV CT 400/200/1A
6
126540
-
... More
33KV CT 200/100/1A
6
133200
-
... More
Supply, Installation, Testing & Commissioning with loading & unloading of 10 MVA 33/11 KV, 3 Phase 50 Hz Vector Group Dyn 11, ON AN Cooled, Copper wound (Outdoor Type) Step Down Power Transformer with Off Circuit Tap changer having tappings (+5%) to (-15%) in step of 2.5 % complete with first filling of ISI Marked Transformer and all other fittings/accessories as per IS: 2026 and latest specification of MVVNL. (Make: TRANSTRON/MODERN /ELECON or Whose Latest GTP Approved in MVVNL having valid CPRI/ERDA Type Test Report)
2
9275000
-
... More
Construction of Power Transformer Plinth of Size 3.50 x 3.50 x 1 Mtr. and the top of Plinth 30 cm R.C.C. Work 1:2:4 with fixing of 02 Nos. Rail l.b. complete in all respect with required all material such as steel bar, brick, coarse sand, cement, labour and T&P etc for proper completion of the work as per specification of M.V.V.N.L.
2
115461
-
... More
Supply, Installation, tesing and commissioning of INDOOR TYPE 11KV, HT VCB 1250Amp 25KA rms-3sec panel with SCADA Campatibility Board having 2 Nos. Incomers, 1 No. Bus-coupler and 9 Nos. Outgoing Vacuum Circuit Breakers with Motorized cum manual spring charging mechanism rated for 11KV, 1250Amp, 25kA/3 Sec, Floor rolling type, Horizontal Isolation & Horizontal Draw-out type design confirming to IS 13118, IEC 62271-100, Mechanical Endurance of M2 class ensuring 10000 operating sequences and E2 class Electrical Endurance. The VCB Panel Board comprising Aluminum Bus - Bar of 1250Amp, Earthing Truck of suitable making capacity along with safety interlocking for complete board and control voltage of 110V DC. The Board shall consist of following panels :
-
-
-
... More
11KV INCOMER VCB PANEL :
-
-
-
... More
11KV, 1250Amp, 25KA/3 Sec, Floor rolling type, Horizontal Isolation & Horizontal Draw-out type as per IS 13118, IEC 62271-100. Vacuum Circuit Breaker should have 3 Nos. encapsulated Vacuum Bottels of same manufacturer as of Circuit Breaker. Motorized spring charging mechanism (230V AC) with integral spring charging handle for manual spring charging associated Shunt Type Trip & Close Coils (110V DC)
-
-
-
... More
Current Transformers : 1 set of 3 Nos. Single Phase, 11KV, 800/400/5+5+PS Class, Core 1 : Class 5P10, 15VA, Core 2 : Class 0.5, 15VA and Core 3 : PS Class for Transformer Differential Protection (PS Class : Vk 200V, Imag 30mA @ Vk/2)
-
-
-
... More
Potential Transformers : 1 set of 3 Nos. Draw-out Type Feeder Connected PTs having ratio 11KV/rt3/110V/rt3, Class 0.5/3P, 100VA along with associated HRC Fuses for Primary side protection
-
-
-
... More
Accessories : TNC Switch, Panel Space Heater, Push Button Trip Circuit Healthy Check, Panel illumination lamp with switch, 3 Pin Plug with Socket of 15Amp., Local & Remote Switch, Emergency Trip Button, AC & DC control circuit through MCB, Auxiliary Contacts (6 NO + 6 NC), Anti Pumping Device
-
-
-
... More
Indications : LED Type Indications for R - Y - B Phase, Breaker On/OFF, Spring Charged, Trip Circuit Healthy, Breaker Trip, Breaker Test / Service Position, AC & DC Healthy
-
-
-
... More
Metering Instruments : 1 No. Tri-vector Meter (Acc. Cl. 0.5) of L&T/Secure make , 1 No. Digital Voltmeter (Acc. Cl. 0.5) of Rishabh, AE & Elmeasure make, 1 No. Digital Ammeter (Acc. Cl. 0.5) of Rishabh, AE & Elmeasure make
-
-
-
... More
Protection & Auxiliary Relays :
-
-
-
... More
1 No. Numerical 3 Over Current + 1 Earth Fault (50/51/50N/51N) Relay providing Over Current (Low Set : 5% - 200% / High Set : 50% - 1600% in steps of 1%), Earth Fault (Low Set : 5% - 200% / High Set : 50% - 1600% in steps of 1%).
-
-
-
... More
1 No. Numerical Under Voltage + Over Voltage (27/59) Relay providing Over Voltage Protection (105% - 170% in steps of 1%), Under Voltage Protection (45% - 90% in steps of 1%), No Voltage Protection (3% - 20% in steps of 1V).
-
-
-
... More
1 No. Trip Circuit Supervision Relay
-
-
-
... More
1 No. High Speed Master Trip Relay
-
-
-
... More
Additional Accessories and Features :
-
-
-
... More
Electrical Interlocking between Incomers & Bus-coupler to prevent mixing of supplies
-
-
-
... More
Standard features should include provision for connecting atleast one run of outgoing cables, Test Terminal Block for protection circuit. Panel fabrication shall preferably be made from sheet steel, safety shutters, continuous rated Close & Trip coils. VCB & Panel should be of same make. Control circuit shall operate on 110V DC except Spring Charging Motor & Space Heater which shall operate on 230V AC. Make:- ABB/Schneider/Siemens
2
875000
-
... More
11KV OUTGOING VCB PANEL :
-
-
-
... More
Same description as INCOMER PANEL above except following changes :
-
-
-
... More
Potential Transformer, Voltmeter, R - Y - B Phase Indication, Under Voltage + Over Voltage Relay are not required in Outgoing Panels
-
-
-
... More
Current Transformers : 1 set of 3 Nos. Single Phase, 11KV, 200/100/1+1, Core 1 : Class 5P10, 15VA, Core 2 : Class 0.5, 15VA. Make:- ABB/Schneider/Siemens
9
820000
-
... More
11KV BUS-COUPLER VCB PANEL :
-
-
-
... More
Same description as INCOMER PANEL above except following changes :
-
-
-
... More
Current Transformer, Potential Transformer, Tri-vector Meter, Ammeter, Voltmeter, R - Y - B Phase Indication, Protection & Auxiliary Relays Make:- ABB/Schneider/Siemens
1
775000
-
... More
Supply/Installation, testing & commissioning of 11 KV Outdoor APFC pannel 12.65KV, 3960KVAr, 3- phase, 50 C/s housed in indoor type CRCA panel, capacitor bank having two variable steps of 1188 KVAR.and two variable steps 792 KVAR Aluminium busbars, Epoxy insulators, HT HRC fuse, Surge Suppressor etc. with details are follows-(10 11 KV, aluminium wound, Dry type series reactors a) 1188 KVAR, 11KV 0.2% for 1188 KVAR step-6 Nos., b) 0.792KVAr for 1188 KVAr 0.2% for 792 KVAR step-6 Nos., (2) 11 KV, 3- Phase dry type RVT-1 No. (3) 12 KV 3 Phase indoor type metal enclosed vacuum contactor-12 Nos. (4) Indoor type automatic PFcorrector unit-1 No. (5) IP 42, Indoor CRCA cubicle panel for accommodating capacitors,series reactor, Vacuum contactor, surge suppressor etc. -1set. Make:- ABB/Schneider/Siemens
-
-
-
... More
9 KV,10 KA, Class lll surse arrestor
-
-
-
... More
Control cables, lungs/thimble, Junction Box etc.
-
-
-
... More
11 KV 3 core al, XLPE Insulated 3x300 mm sq. Cable
-
-
-
... More
11 KV XLPE cable (3x300sq.mm) heat shrinkable jointing kit indoor.
-
-
-
... More
11 KV VCB Switchgear for capacitor bank with complete arangement Adddisnal pannel for connetion with existing 11 KV bus bar.
-
-
-
... More
Casting of civil foundation.
-
-
-
... More
Cable trench for laying of power/control cables.
-
-
-
... More
Earthing for panel by Chemical pipe earthing.
2
3165000
-
... More
Supply and fixing of Run through clamp for L.A./P.I. as per direction of Engineer in charge.
24
1055
-
... More
S/F of 200Amp./ 415volt Havy Duty bouble break complete with HRC fuse and 200A 4way Al Bus Bar on angle iron frame complete in all respect as per direction of Engineer in charge.
1
15500
-
... More
S/F of 32Amp. 415V. Metal clad TPN rewireable type switch fuse unit on angle iron bracket complete in all respects. as per PWD SOR 2018 SI No. 315 Cat.B
1
2120
-
... More
Providing necessary T&P and furniture for maintenance staff as per Item Given below.
-
-
-
... More
12 mm thick Rubber mat of size 2x 1 m PWD S.O.R. 2018 S.No. 1136 Nos. 4
-
-
-
... More
Brass Earth chain Nos. 2
-
-
-
... More
Rubber hand gloves tested on 1100V. Pair 4
-
-
-
... More
Maximum load/ minimum load tripping board complete with all necessary equipments. No. 1
-
-
-
... More
Single line diagram with board complete. No. 1
-
-
-
... More
Notice board. No. 1
-
-
-
... More
Wall clock No. 1
-
-
-
... More
First aid boxNo. 1
-
-
-
... More
Sign. board of S/S with stand. No. 1
-
-
-
... More
Key board No. 1
-
-
-
... More
Table with drawer & sunmica Armed chair No. 1
-
-
-
... More
Armed chair No. 6
-
-
-
... More
Rack No. 2
-
-
-
... More
Bench No. 2
1
69386
-
... More
Making fire fighting arrangements in the control room building as per Item Given below.
-
-
-
... More
Cost of Fire extinguisher 4.5 kg capacity complete with stand No. 4
-
-
-
... More
Cost of Fire bucket complete No. 6
-
-
-
... More
Cost of Fire bucket stand for 6 Nos. bucket made of M.S. Angle 45x45x6mm. No. 1
1
53360
-
... More
Supply & Laying of following size Armoured control cable. Make Polycab/Gloster/Havells/Universal/KEI/Finolex
-
-
-
... More
4x2.5 Sqmm
750
297
-
... More
6x2.5 Sqmm
600
419
-
... More
Supply, Installation, Testing & Commissioning of 24V, 20A Trickle cum Boost Battery Charger suitable for 24V 70AH Battery Bank and also to feed 5A Power to External Load such as Emergency Light etc.70AH, 30V Battery Bank SMF batteries with Mounting Rack & along with connecting Leads and other associated accessories. The Charger shall be suitable to operate Emergency Light Load along with 33kV HT VCB Closing / Opening and also 11kV VCB Closing & Opening.
1
220000
-
... More
Supply & Filling of Local Earth (including royality) by mechanical transport from outside of scheme from 8 km also including ramming & Watering of the earth in layers not exceeding 20cm to required levels and slopes complete as per direction of E/I.
717.6
256
-
... More
Construction of control cable trench of required size 0.30x0.45 Mtr. M-15 class brick work including plastering etc. and covered with R.C.C. slab (0.50x0.60M) size complete with all material, labour and T&P etc. required for proper completion of work as per direction of E/I.
64
2855
-
... More
Supply & Filling of 20mm stone grit in yard 100mm thick complete in all respects as per direction of E/I.
115.13
3388
-
... More
Supply & Laying of following type high conductivity aluminium strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest ammendment at a depth of 1 Mtr. Below ground level over a cushion of 75mm thick sand around and protect with brick on sides and top of cable shall be properly connecting with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. Make Polycab /Gloster/Havells /Universal /KEI /Finolex
-
-
-
... More
70 Sqmm 3 Core as per PWD SOR 2018 S.No.506 (d)
70
915
-
... More
400 Sqmm 3 core
200
4222
-
... More
Supply & Jointing of following sizes 11KV 3Core Indoor/out door type (Heat shrinkable) Jointing Kit Complete in all respects.Make:- Raychem/3M/Densons
-
-
-
... More
Indoor type 70 Sqmm As per DSR 2022 SI no. 10.4.1
2
10048
-
... More
Outdoor type 70 Sqmm As per DSR 2018 SI no. 10.5.1
2
15052
-
... More
Indoor type 300-400 Sqmm As per DSR 2022 SI no. 10.4.4
16
13403
-
... More
Outdoor type 300-400 Sqmm As per DSR 2018 SI no. 10.5.4
16
18803
-
... More
Supply and Erection of cable stand of size 3.00x0.50m above G.L. duly grouted with cement concrete upto 50 cm. depth for laying cables made of angle iron size (65x65x6mm) having welded M.S. flat of size 50x6mm on top middle, and 45mm above ground level for fixing cable by clamping with M.S. flat of 40x4mm size as per direction of E/I.
2
4938
-
... More
Supply,Installation, Testing and Commissioning of 33 KV 1250 A 31.5KA/3Sec outdoor type Vacuum Circuit Breaker including loading, unloading, carriage & erection of the same of plinth with required channels, nut & bolts making all necessary connection etc. as per direction of E/I. Make:- ABB/Schneider/Siemens
4
480000
-
... More
Construction of 33 KV VCB plinth of size 2.25x2.25Mtr. with all material, labour and T&P required for proper completion of the work as per direction of E/I.
4
16791
-
... More
SI.T.C of protection cum control pannel SCADA compatibility INC 33/11 KV 10MVA Double CKT. T/F with Installation, Testing & Commissioning etc. complete in all respects as per direction of E/I.
1
495000
-
... More
S.I.T.C of protection cum control pannel SCADA compatibility INC 33 KV line feeder double ckt.complete with Installation, Testing & Commissioning , etc. complete in all respects as per direction of E/I.
1
390000
-
... More
Supply and Erection of Double Pole Structure made of following types of support duly grouted in 1:4:8 cement concrete (1 cement, 4 coarse sand and 8 grit of 20mm nominal size plinthed plastered & painted in the same manner as already specified for respective supports suitable for Pole mounted type substation with different types of M.S. Channel and angle iron duly fabricated for disc fittings D.O. fuse set, TPMO ladder stand projecting outside dropper and bracings, including cost of all material, labour and T & P required for proper completion of work as per direction of E/I. (Make:- Manufacturers Whose Latest G.T.P. Approved in MVVNL)
-
-
-
... More
With 11 Mts. long 410 SP 55 S.T. Pole
1
58120
-
... More
Supply and Erection of 11 KV TPMO set complete in all respects as per direction of E/I.
1
10157
-
... More
Supply and Erection of 11 KV D.O. fuse set complete in all respects. as per direction of E/I.
1
6582
-
... More
Supply and fixing of H.T./L.T. jumpering and connections on double pole/four pole, lightning arrestor and transformer. The rates include the cost of all materials, labour and T & P etc. required for proper completion work as per direction of E/I.
1
4225
-
... More
Supply Installation, Testing and Commissioning with loading & unloading of 63 KVA, 11/0.433 KV "Energy Efficient (Level-1)" Aluminium wound, Outdoor Delta-Star Distribution Transformer as per BIS 1180-2014 Standards and latest specification of MVVNL. (Make: TRANSTRON/MODERN/ELECON or Whose Latest GTP Approved in MVVNL having valid CPRI/ERDA Type Test Report)
1
214980
-
... More
Supply & Fixing of lighting arrestor set (3 Nos.) suitable for mounting on steel supports complete with all materials, labour and T & P required of proper completion of work as per direction of E/I.
1
8399
-
... More
Supply & Fixing of following Size GI pipe 'B' class for cable duly clamped with supports by 3 nos. with clamps of 20x3mm M.S. flat bolts nuts & washers required for proper completion of work. Make:- JINDAL/TATA/SAIL
-
-
-
... More
100 mm Dia
48
1191
-
... More
Supply & Laying of following Size GI pipe 'B' class for cable complete in all respect as per direction of E/I. Make:- JINDAL/TATA/SAIL
-
-
-
... More
150 mm Dia
96
1552
-
... More
Supply & Laying of Al. conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below GL over a cushion of 75mm thick sand all around & protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Make Polycab /Gloster/Havells /Universal /KEI /Finolex
-
-
-
... More
10 sqmm4 core as per PWD SOR-2018 SI No. 501(h)
350
327
-
... More
16 sqmm 4 core as per PWD SOR-2018 SI No. 501(i)
100
343
-
... More
50 Sqmm 3.5 core as per PWD SOR-2018 SI No. 501(l)
40
492
-
... More
Supply and fixing of plain or pin type copper tin plated cable socket (lugs) to the cable leads, insulating with tape and making connection etc. complete in all respects.
-
-
-
... More
10 Sqmm as per PWD SOR-2018 SI No. 501(c )
64
20
-
... More
16 Sqmm as per PWD SOR-2018 SI No. 501(d)
16
21
-
... More
25 Sqmm as per PWD SOR-2018 SI No. 501(e)
4
27
-
... More
50 Sqmm as per PWD SOR-2018 SI No. 501(g)
12
48
-
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc.. Complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of E/I.
-
-
-
... More
10 Sqmm 4 core As per PWD SOR 2018 SI no. 503 (h)
16
87
-
... More
16 Sqmm 4 core As per PWD SOR 2018 SI no. 503 (i)
4
87
-
... More
50 Sqmm 3½ core As per PWD SOR 2018 SI no. 503 (l)
1
178
-
... More
Supply & fixing of 7mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thick) having 3mm thickness with Single arm bracket (1Mtr length) on RCC foundation including the cost of 4 way connector with bakelite sheet fixed in G I Pole ,foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect. as per PWD SOR 2018 SI No-641 Make:- BAJAJ/VALLMONT/RRISPAT CONSOUL
7
16500
-
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser/Reflector with 1.0 Sqmm 3 core multistand copper unarmored cable suitable lenght and 1 no 6 Amp SPMCB Complete driver set suitable for 30 to 40 watt. Confirming to IP 65 Protection Including Street light Bracket (60 cm long) with pole cap suitable for Street light Fittings complete in all respect as per PWD SOR 2018 SI No-1420 CAT-AAA Make:- Havells/Polycab/Philips/Jaquar
7
4500
-
... More
Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing UPPWD SOR-2018 S.No. 726 (D)
4
14850
-
... More
Supply and Burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing UPPWD SOR-2018 S.No. 727 (D)
6
19750
-
... More
Supply & Erection of 11 KV Section Double pole structure (Riser) Bottom Portion Galvanised made of following types of supports duly grouted 1:4:8(1 cement, 4 coarse sand and 8 brick blast 40 mm size Plinthed plastered and painted in the same manner as already specified for respective supports with Two nos. channels of size 100x50mm, Two no. 75x40 mm, in help of 75x10mm, MS Clamp and 65x65x6 mm angle iron bracing 3 no. Pin Insulator, etc. complete with all material and T&P etc. required for proper completion of work. (Make:- Manufacturers Whose Latest G.T.P. Approved in MVVNL)
-
-
-
... More
Double Pole S.T. Pole SP-55, 11.00 M. Long
3
54963
-
... More
Making suitable earth of GI pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWG G.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I.
13
1086
-
... More
Supply of following Size 11 KV Standered Compacted Aluminium Conductor Screen with Extruded Semi conducting compound, XLPE Insulated, insulation screening with Extruded Semi conducting compound in combination with Copper Tape, Cores laid up, innersheath of PVC, Galvanised steel strip Armoured & overall PVC sheathed cable confirming to IS 7098 ( Part-2) 2011 with up to date ammendments for proper completion work. Make Polycab /Gloster/Havells /Universal /KEI /Finolex
-
-
-
... More
300 Sqmm 3 core
1940
3127
-
... More
Supply of HDPE pipe upto PN-6 working pressure Rating material Grade PE-80 Nominal dia (OD) 160 mm 9.50 mm thickness complete in all respect as per relevants I.S. Technicals specification.
1364
619
-
... More
Drilling of Road Parallely & Road Crossing at a depth of 2 to 3 Mtr. as required & laying charges of cable & 160mm Dia HDPE Pipe complete with all material, labour, Drilling machine & required T&P etc. required for proper completion of work as per Direction of E/I.
1364
670
-
... More
Supply and laying of 32mm x6 mm G.I strip Compete as per PWD SOR-2018 S.No. 717
40
150
-
... More
Supply and laying of 32mm x6 mm Copper strip Complete as per PWD SOR-2018 S.No. 720
60
250
-
... More
Supply & Fabrication of 8 SWG G.I. Wire mesh Security fencing by providing vertical supports of 50 x 50 x 6mm long including cutting bending at top at a distance of 0.60 Mtr. Including welding, cutting and Bending at bottom at a distance of 0.15 Mtr. Drilling of 04 Nos. Holes of 6mm Dia on Top for Holding the Barbed Wire at a distance of 125 mm hole to hole and 7 Hole in vertical position of 10mm Dia at a distance of 280mm hole to hole for riveting the chain link mesh of size 2" x 1" and MS Flat 50 x 6mm & 25x3mm and fixing the vertical support in plumb including brick work in repair wall with supply of all material, labour, T&P etc. required for proper completion of the work as per MVVNL Specification
413
1635
-
... More
Construction of security Fencing plinth size (30 x 14M) of required size M-150 class Brick including plastering etc. and 4.5m x 3.0m size material, labour and T&P etc. required for proper completion of the work
1
121703
-
... More
Supply & Fixing of 1200 mm Sweep of Ceiling Fans with Fan Motor of A.C. Permanent insulation capacitor rating confirming BEE 5 Star rating and IS: 374/79 and also comply with IS:1709/1984 with Latest ammendment. The rated voltage 220/240 Volts, 50 Hz, I-ph AC the fan assemble should consists of down rod blades, shackle canopies etc. and double ball bearing system. complete in all respect Make Havells/ Bajaj/ Crompton
33
1880
-
... More
Supply & Fixng of 300 mm Sweep Heavy Duty 950 RPM 230 Volt single Phase Exhaust Fan. Complete in all respect Make Havells/ Bajaj/ Crompton
8
3825
-
... More
Supply & Fixng of 450 mm Sweep Heavy Duty 950 RPM 230 Volt single Phase Exhaust Fan. Complete in all respect Make Havells/ Bajaj/ Crompton
2
5909
-
... More
Supply & Fixing of 16 SWG M.S Drum with Livers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect as per PWD SOR 2018 SI No. 1122 (A)
10
1180
-
... More
Supply & Fixing of Shock Treatment Chart (Prescribed Under I.E. Rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work Complete in all respect. as per PWD SOR 2018 SI No. 1134
2
305
-
... More
Supply & Fixing of Recess/ Surface/ Pendent Mounting Round 10 to 15 Watt L.E.D. Down lighter having powder coated Die cast Aluminium Housing with Heat Sink, Diffuser/ Reflector and Driver set complete in all respect as per PWD SOR 2018 S. No. 1402 Cat AAA Make:- Havells/Polycab/Philips/Jaquar
2
1350
-
... More
Supply & Fixing of L.E.D. Tubelight with Batten suitable for up to 1x22 Watt L.E.D. Tubelight including Tube on surface complete in all respect as per PWD SOR 2018 S.No. 1413 Cat AAA Make:- Havells/Polycab/Philips/Jaquar
69
1190
-
... More
Supply & Fixing of L.E.D. Street Light Fittings having Die cast Aluminium Body and diffuser/ Reflector with 1.0sqmm 3 core Multistrand copper unarmoured cable suitable length ,1 no. 6 Amp. SPMCB complete Driver Set suitable for 45 to 50 Watt confirming to IP 65 Protection including street light Bracket (60 cm long) with Pole cap suitable for street light fittings complete in all respect as per Direction of E/I. PWD SOR 2018 S.No. 1421 Make:- Havells/Polycab/Philips/Jaquar
7
4940
-
... More
Making & Fixing of Retro Radium Board frame with 50sqmm Hollow M.S. Pipe & ACP Sheet 3mm & Retro Radium base 3mm thick including all materials, Labour, T&P etc. and Fixing at Site
2
79680
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements