Uttar Pradesh Housing And Development Board Tender

Providing and injecting chemical for preconstruction antitermite treatment and creating and chemical barrier under and around the coloumn pits wall trenches basement excavation top surface inplinth filling juction of wall and floor, along the external per metre of binding expansion joints surrounding of pipes and conduct etc. complete (plinth area of the building at ground floor only shall be measurd as per I.S. 6313 (Part II 1981) Alderine emulsifiable concentrate or any other approved material such as Hepthachlor of chlordance will be used. the rate of application of chemical emulsion shall be as follows:- 1) Treatment for massonary and foundation 5 lites per Sqm 2) Back fill in immediate contract with foundation 7.5 lites per sqm

12mm thick plaster in 1:3 cement and coarse sand mortar below plinthn i/c water proofing compound.( BASED ONSl. No. 582A)

M-150 class Brick work in 1:6 cement and coarse sand mortar in super structure for one brick thick walls. (Sl No. 303+(305a-305)+309+310)

Class M-150 Brick work in 1:4 cement and coarse sand of 1.75 - 2.00 finness modulus mortar in super structure including necessary cutting moulding of brick as required thichkness of walls no to be less than half brick including supply of all materials, labour and T&P etc. required for proper completion of work. (SI No. 305a+309+310A)

Mild steel or Iron work in heavy sizes such as truses, built up gates,record racks,roof work, gates etc including rivetting or welding where necessary positing. (SI No. 503)

Mild steel or Iron work in heavy sizes such as M.S. gril & stair case railing etc including rivetting or welding where necessary positing. (SI No. 502a)

M.S. Iron work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and excluding cost of binding wire. (Analysis)

R.C.C work with cement approved coarse sand (F.M. 2.20 TO 3.60) and 2cm [3/4"] gauge approved stone grit in the proportion 1:1½:3 in lintels of doors and windows excluding supply of reinforcement and its bending the but including its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc, and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (SI No 283+284a-284)

R.C.C work with cement approved coarse sand (F.M. 2.20 TO 3.60) and 2cm [3/4"] gauge approved stone grit in the proportion 1:1½:3 in slab excluding supply of reinforcement and its bending the but including its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc, and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (SI No 284a)

12mm thick bearing plaster in 1:6 cement and coarse sand (F.M. 1.25) mortar over brick work minimum thickness not to be less than 1 cm i/c two coat of white washing Including supply of all materials , labour , tools & plants etc. required for proper completion of the work. (SI No 586+(582a-582)+672)

12mm thick cement plaster with 1:6 cement and coarse sand (F.M. 1.50-1.75) mortar over brick work minimum thickness not to be less than 1 cm. Including supply of all materials , labour , tools & plants etc. required for proper completion of the work. (SI No (584a-584)+586)

Providing wall putty on New surface with approval quality material of berger/J.K/Birla or similar make-2 coats. (New Items SI No. 15.22 P-37)

Finishing wall with two weather coat paint of approved make and quality on new wall with one priming coat to give an even shade including supply of all materials, labour, tools & plants etc. required for proper completion of work (New Items SI No. 15.22 Schedule item 662 ,P-37)

Painting or varnishing work in small areas or new wood work with one coat priming paint and two coat of approved superior quality of Synthetic Enamel paint including supply of all materials , labour & tools and plants etc. required for proper completion of work . Paint to be used should be confirm the ISI no. 103 -1950. (SI No 641+642)

Same as Item No.19 but for two coat over and i/c priming coat on new iron works. (SI No.644+645)

Providing and laying Waterproofing Treatment on roof slabs by surface preparation by V groove cutting and plugging with polymer mortar at junction of slab and parapet wall and providing application of one slurry coat of ISI mark polymer based chemical as per IS 13435 part-3 such as supercreate SB / Warrior / Hydrocrete/ Consild bond or equivalent @ 0.25 Kg. Polymer with 0.50 Kg. cement and unrolling of fibre glass cloth with minimum overlapping of 10 cm. while the slurry coat is in Green condition followed by 2nd coat of IS mark polymer as per IS 13435 part-3 @ 0.25 Kg. polymer mixed with 0.50 Kg. of cement and a protective layer of average 20 mm thick but not less than 10 mm to provide slope in cement mortar 1:4 with of Average 20 mm thick but not less than 10 mm to provide slope in cement mortar 1:4 with Recron 3s, 125gm. mixed with one bag cement of 50 Kg. (1 Cement : 4 Coarse sand with FM 1.75 to 2.00) mixed with ISI mark polymer based bonding agent/ cement modifier such as concrete bond 101/ Worrior / Unibond-Latex/Consild bond or equivalent @ 1 Kg. per bag of cement and 200 ml. ISI mark integral water proofing Admixture as per IS 2645 such as doncrete RMW/ Pidiproof-LW/Liksil-XL/ Cico-super/ Worrior-Mix or equivalent and sandwitched with chicken wiremash. 20 mm average thickness shall include 1st backing coat of 12 mm and 2nd coat of 8 mm thick. Finally finishing the surface with neat cement slurry and making of 300 mm x 300 mm square complete in all respects.

Cast cement concrete Door sills, chaukhat, boundary post, shelves and similar small work with cement Approved Coarse sand with2 cm graded stone grit in 1:2:4 excluding supply of reinforcement and it's bending but including fixing and binding the same with 24 B.W.G.G.I. Binding wire including supply of all material labour T & P etc.required for proper completion of the work. (SI No 282)

Supply & fixing of 32 mm thick Indian Commercial flush door shutters I.S.I. conforming to I.S. 2202 part1 (1983) excluding necessary fittings . Schedule item No 471(a) Chapter-09

Approximate cost of ISI marked oxidised iron fittings with screws for door & windows. (Sl. No. 473)

Supply and fixing of hexagonal M.S. fan box. (MR)

Providing and laying of 25mm dia PVC conduct heavy quality ISI mark in slab & wall.MR

Add extra labour & material for rough face. Plater (sor-2022,596)

Supply and fixing of switch box 200x250x65mm size of approved make of 1.00mm thick ISI mark C.P. Sheet MR

Supply and fixing of switch box 175x100x65mm size approved make.MR

COST FOR END WALL (For 12) Excavation in foundation in ordinary soil (loam clay or sand) i/c lift upto 1.5m and lead upto 30.0m and including filling, watering and ramming of excavated earth into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a lead of 30.0M from the foundation Trenches. (S.I.No. 251)

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand and cement in proportion 8:4:1 in Foundation and under floors i/c supply of all materials labour and T&P etc. required for proper completion of the work. (S.I.No. 281)

Class M-150 Brick work in 1:6 cement and approved coarse sand of 1.75-2.00 finness modulus mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work. (S.I. No. (305(a)-305)+303)

R.C.C. wor in 1:1½:3 in plinth & Door Bend (As SI No 285)

M-150 class Brick work in 1:6 cement and coarse sand mortar in super structure for one brick thick walls. (Sl No. 303+(305a-305)+309+310)

12mm thick cement plaster with 1:6 cement and coarse sand (F.M. 1.50-1.75) mortar over brick work minimum thickness not to be less than 1 cm. Including supply of all materials , labour , tools & plants etc. required for proper completion of the work. (S.I. No 586)

Providing wall putty on New surface with approval quality material of berger/J.K/Birla or similar make-2 coats. (New Items SI No. 15.22 P-37)

Finishing wall with three weather coat paint of approved make and quality on new wall with one priming coat to give an even shade including supply of all materials, labour, tools & plants etc. required for proper completion of work. (New Items SI No. 15.22 P-37)

M.S. Iron work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and excluding cost of binding wire. (Analysis)

COST FOR JOINT EXPANSION WALL (For 9) Excavation in foundation in ordinary soil (loam clay or sand) i/c lift upto 1.5m and lead upto 30.0m and including filling, watering and ramming of excavated earth into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a lead of 30.0M from the foundation Trenches. (S.I.No. 251)

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand and cement in proportion 8:4:1 in Foundation and under floors i/c supply of all materials labour and T&P etc. required for proper completion of the work. (S.I.No. 281)

Class M-150 Brick work in 1:6 cement and approved coarse sand of 1.75-2.00 finness modulus mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work. (SI No. (305(a)-305)+303)

R.C.C work with cement approved coarse sand (F.M. 2.20 TO 3.60) and 2cm [3/4"] gauge approved stone grit in the proportion 1:1½:3 in lintels of doors and windows excluding supply of reinforcement and its bending the but including its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc, and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (SI No 283+284a-284)

Class M-150 Brick work in 1:4 cement and coarse sand of 1.75 - 2.00 finness modulus mortar in super structure including necessary cutting moulding of brick as required thichkness of walls no to be less than half brick including supply of all materials, labour and T&P etc. required for proper completion of work. (SI No. 305+309+310A)

M-150 class Brick work in 1:6 cement and coarse sand mortar in super structure for one brick thick walls. (Sl No. 303+305a-305+309)

M.S. Iron work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and excluding cost of binding wire. (Analysis)

Making expansion joints with 24 gauge 5" wide aluminium sheet & 8" wide Tar felt fixed with Tar mastic in roof or floors, filling joints with approved bituman 30/40 as per direction of the Engineer in charge including supply of all materials, labour, tools & plants etc. Required for proper completion of the work. ( S.I.No 547)