Uttar Pradesh Housing And Development Board Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Jan 2025
Closing Soon28 Feb 2025
Tender Amount₹ 5,21,00,000
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using the formula: Assessed Available Bid Capacity = (A * N * 2.5 - B) Where:
A = Maximum value of civil engineering works executed in any year during the last five years
N = Number of years prescribed for completion of the works for which bids are invited
B = Value of existing commitments and on-going works to be completed during the next 0.5 years Additionally, the tender has specific requirements:
1. Solvency: Not less than Rs. 50.00 lacs for bid value up to Rs. 500.00 lacs and Rs. 75.00 lacs for bid value above Rs. 500.00 lacs.
2. Net Worth: Positive for the last 3 financial years.
3. Liquid Assets: Minimum 15% of the bid value, i.e., not less than Rs. 78.15 Lacs.
4. Turnover: Average Annual financial turnover during the 3 consecutive years (ending 31st March of the previous financial year), out of the last 4 financial years, should not be less than 30% of the Bid Value. Formulas:
- Average Annual Turnover ≥ 0.3 * Bid Value
- Liquid Assets ≥ 0.15 * Bid Value
- For Bid Value between 50.00 Lacs to 75.00 Lacs: Solvency ≥ 20.00 Lacs
- For Bid Value between 75.00 Lacs to 2.00 Cr.: Solvency ≥ 40.00 Lacs
- For Bid Value between 2.00 Cr. to 5.00 Cr.: Solvency ≥ 50.00 Lacs
- For Bid Value more than 5.00 Cr.: Solvency ≥ 75.00 Lacs The available bid capacity should be more than the total bid value for the bidder to be qualified, and the bid value is Rs. 521.00 Lacs.
Technical Capacity
... View More
The required prior work experience for the bidder is 7 financial years in organized sectors, specifically in Govt./ Semi Govt./ PSU sectors. The tenderer must have experience of successfully executed and completed work, with specific requirements including:
- One similar completed work costing not less than 80% of the Bid Value, which is Rs. 416.80 Lacs for a bid value of Rs. 521.00 Lacs.
- Two similar completed work costing not less than 50% of the Bid Value, which is Rs. 260.50 Lacs each.
- Three similar completed work costing not less than 40% of the Bid Value, which is Rs. 208.40 Lacs each.
The bidder should have successfully completed similar work in the last 7 financial years, with performance certificates that fulfill any one of the following:
(a) Certificate of one work of cost not less than 80% of the bid value (Rs. 416.80 Lacs).
(b) Certificate of two works each of cost not less than 50% of the bid value (Rs. 260.50 Lacs each).
(c) Certificate of three works of cost not less than 40% of the bid value (Rs. 208.40 Lacs each).
Costs
EMD
₹ 10,42,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_1000458_1Tender No
185/G-12/03dt 23-01-2025 DIETTender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering ,dressing etc rate to include cost of all materials, labour T&P etc. Required for proper completion of work .
97.62
1200
117144
... More
Providing and injecting chemical emulsion for preconstruction antitermite treatment and creating a chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface in plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordane will be used.The rate of application of chemical emulsion shall be as follows : -
(1)Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment of soil along external perimeter of building 7.5liters/100sqm. (5) Treatment of soil under apron along external perimter 5 liters/100 sqm.
910.28
210
191158.8
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases uoto plinth level including the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Footing
441.32
6769
2987295.08
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases uoto plinth level, including the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Columns up to Plinth Level
5.52
11050
60996
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Columns above Plinth Level Upto 5th Floor Level
80.3
11200
899360
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3(M-20) in lintal bands/Plinth band including supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20Upto 5th Floor Level
90.63
10100
915363
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3(M-20) in lighter beam including supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 Upto 5th Floor Level
180.89
10230
1850504.7
... More
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3(M-20) in slab including supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 Upto 5th Floor Level
352.78
11750
4145165
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hookes required for completion of the work TMT Fe 500 upto 5th Floor
885.02
7850
6947407
... More
Class 150 brick work in 1:6 cement & coarse sand of 1.50 to 2.00 fineness modulus mortar in foundation & plinth including supply of all material labour and tools and plants etc required for proper completion of work. upto 5th Floor
230.82
6500
1500330
... More
Class 150 brick work in 1:6 cement & coarse sand of 1.50 fineness modulus mortar in super structure including supply of all material labour and tools and plants etc required for proper completion of work.upto 5th Floor
499.97
7600
3799772
... More
Class 150 brick work in 1:4 cement & coarse sand of 1.50 fineness modulus mortar in super structure including supply of all material labour and tools and plants etc required for proper completion of work upto 5th Floor
19.57
8200
160474
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
64.2
5600
359520
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (400 x 19 x 1.9) made of (big series) frame 60 x 58 mm, sash 60 x 72 mm , & T mullion 60 x 72 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension . (Area of window above 3.00 sqm upto 5.00 sqm).
58.62
7600
445512
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes 5.0 mm thick glass panes
57.13
1800
102834
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
4620.94
115
531408.1
... More
Providing & fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing & making curvature (wherever required) & fitting the same with necessary stainless steel nuts & bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Eng-in-charge. (weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.)
708.53
510
361350.3
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood.
16.91
3400
57494
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
3.78
330
1247.4
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
5
680
3400
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
33
85
2805
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single Leaf
124.12
1700
211004
... More
DOUBLE LEAF
9.45
1800
17010
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
46.32
2550
118116
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame.
143.85
395
56820.75
... More
15mm thick plinth plaster with cement mortar in proportion of 1:4 cement & Coarse sand) including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
341.46
285
97316.1
... More
12mm thick plaster with cement mortar in proportion of 1:6 cement & Coarse sand including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
1908.82
235
448572.7
... More
15mm thick plaster wit cement mortar in proportion of 1:6 cement & Coarse sand) including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
5304.67
265
1405737.55
... More
12mm thick plaster with cement mortar in proportion of 1:3 cement & Coarse sand with a floating coat of neat cement including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
193.2
300
57960
... More
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required. including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
523.74
30
15712.2
... More
Making drip course in sun shade or facia as per direction of Engineer incharge including supply of all materials,labour T & P etc for proper completion of the work. including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
231.42
50
11571
... More
Providing and laying Polished Granite stone flooring in Skirting/dado in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/RubyRed or equivalent. area of slab over 0.50 sqm.
292.74
3450
1009953
... More
Providing and laying vitrified floor tiles in Skirting/dado of different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete (Size of Tile 600x600 mm)
1200.99
1130
1357118.7
... More
Providing and laying Vitrified tiles in floor Skirting/dado in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size (Size of Tile 600x600 mm)
507.92
1060
538395.2
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
149.41
760
113551.6
... More
Providing and fixing Ist quality ceramic glazed wall tiles size 450x300 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
360.6
800
288480
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) (DSR-12.45.1-14.05%)
399.33
950
379363.5
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate [AT APRON]
174.3
425
74077.5
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, etc. complete.
41.09
650
26708.5
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture (Steel Painting)
279.57
118
32989.26
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (Wood Work)
323.29
122
39441.38
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1908.82
118
225240.76
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
9173.57
105
963224.85
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compund) content less than 50 grams/ litre of approved brand & manufacture, including applying addotional coats whereever required to achieve even shade & colour. Two coats, with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre.
7264.76
150
1089714
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.
621.78
155
96375.9
... More
Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm
63
450
28350
... More
P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 250 mm x 10mm
63
160
10080
... More
Providing & fixing bright/ matt finished stainless steel handles of approved quality & make with screws and 125mm long.SI marked
136
100
13600
... More
Construction of drain of size of size 150 x 150 mm along with apron including excavation,base concrete 1:4:8 in thickness of 7.5cm of and brick work in foundation 1:4( 1 cement : 4 coarse sand) and brickwork in half brick thick in foundation 25mm thick cement concrete (1:2:4 mix) flooring base and 20mm thick plaster (1:2) finished with neat cement. (Analysis)
236.77
1100
260447
... More
Providing and laying "Brick coba"12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other,over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound.spreading cement slurry mixed with acrilic cement concrete water proofing compoundfilled gapes of coba and top of coba mortar with water proofing compound in 1:4 cement and coarse sand mortar .Allabove operations to be done in order and as directed and specified by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
915.43
1130
1034435.9
... More
Providing and laying damp proof course50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand (ZONE III) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources) including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
76.82
343
26349.26
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
76.82
101
7758.82
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
9584.35
135
1293887.25
... More
Providing and Fixing ACP Sheet for roof complete in all respect
259.06
1905
493509.3
... More
Providing and Fixing LOUVERS complete in all respect
303.6
4300
1305480
... More
Providing & fixing 4mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with
39.51
735
29039.85
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Sal Wood.
0.8
84000
67200
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm
32.82
920
30194.4
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood
18.27
3500
63945
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
225.54
130
29320.2
... More
Providing and laying 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge
221.5
760
168340
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
143.07
7100
1015797
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Using grade ‘A’ sealing compound conforming to IS: 1834.
569.03
6
3414.18
... More
Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
11.03
5500
60665
... More
Synthetic Badminton Court Layer Synthetic Acrylic S.no Description Ref. Image Unit Qty Per Sq.ft Total Amount 8- LAYERS BASKET BALL COURT SYSTEM PRIMER: 100% ACRYFLEX UNIC FLOOR KDF based emulsion to improve bond of acrylic court system to the concrete or or asphalt surfaces. RESURFACER: 1 Acryflex Resurfacer 367-30 for filling and smoothing asphalt or concrete surfaces in preparation for Acryflex ITF Approved badminton court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating CUSHION COAT: 2 Layers of Acryflex unic floor (KDF) cushion for asphalt or concrete surfaces in preparation for Acryflex ITF approved system ULTRA CUSHION COAT: : 2 Layers of Acryflex unic floor (KDF) cushion for asphalt or concrete surfaces in preparation for Acryflex ITF approved system PRECOAT: 2 layers of ACRYFLEX UNIC FLOOR (KDF) based textured badminton topcoat. Ideal for color coating Basket ball courts and other sport pavement surfaces. OVERLINE : 100% ACRYFLEX UNIC FLOOR (KDF) based high hiding line paints
81.74
2700
220698
... More
Chequerred precast cement concrete tiles 20 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
18.5
1000
18500
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C
452
1060
479120
... More
Supply and wiring of submain with 4 number 10 sqmm & 2 No. of 6 sqmm earth continuity wire . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 10 SWG copper earth contunity wire including colour wash etc. complete in all respects.
418
820
342760
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes for FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2X1.5 sq. mm+1X1.5 sq. mm earth wire
1365
165
225225
... More
2X2.5 sq. mm+1X2.5 sq. mm earth wire
1870
190
355300
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1485
220
326700
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1326
300
397800
... More
2X10 sq. mm+1X6 sq. mm earth wire
1749
405
708345
... More
4X10 sq. mm+2X6 sq. mm earth wire
1538
720
1107360
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS. Sheet incorporating 10mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C roof before concreting along with supply of all materials,labour. T& Petc. required for proper completion of the work.
75
160
12000
... More
Supply & fixing of single LED light wall bracket 3 to 6 watt on matching M.D.F.E.G. board base etc. complete in all required. Cat. AAA
39
2400
93600
... More
Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT AAA
28
1750
49000
... More
Supplying installation testing and commissioning Recess Mount 2'x2' LED tile Elate Recess Mounted 36W to 46 Watt LED Square Fitting complete in all respect. (Oriant )
17
4600
78200
... More
Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.CAT AAA
152
1130
171760
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required
6
72
432
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/MIW) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THO less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required
75
2000
150000
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
50
185
9250
... More
Supplying and fixing 40 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Four Pole
20
2100
42000
... More
Supplying and fixing 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Four Pole
10
2000
20000
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
11
190
2090
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 4 way, Double door TPN MCBDB
22
782
17204
... More
For 6 way, Double door TPN MCBDB
22
810
17820
... More
Supplying and fixing 20 amps, 240 volts SPN industrial type, socket outlet with 2 pole and earth metal enclosed plug top along with 20 amps 'C' Curve, SP, MCB in sheet steel encloser on surface or in recess with chained metal cover for the socket outlet and complete with conncections, testing & commissioning etc as required.
3
1100
3300
... More
Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 V flush type universal socket switch on concealed G.I. box Modular type including supply of all material, labour T&P etc. required for proper completion of work.
185
445
82325
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone / TV socket outlet
24
110
2640
... More
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
5
5400
27000
... More
Supplying & Laying of 25mmx5mm G.I. Strip on surface for earthing purpose as required complete in all respects.
325
175
56875
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
325
50
16250
... More
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm Phase to neutral-minimum 15mm Main L.T. Panel Incoming : 400Amp. MCCB-1 Nos. Outgoing : 200 Amp,MCCB-2 Nos,100 Amp MCCB-1 No, & 63 Amp MCCB-1 No. TPN aluminimum bus bar of suitable length. Cat. B Pannel Cubicle type OR outgoing as per site requirment
1
194000
194000
... More
Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm Phase to neutral-minimum 15mm Main L.T. Panel Incoming : One (1) No 200A 4 pole MCCB Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. One (1) No. (0-20 0A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc One (1) Set of Phase Indication Lamp. Bus Bar One (1) No.200 A, TPN aluminimum bus bar of suitable length.: Outgoing : Phase indication lamps on each outgoing to be provided. 100Amps TPN - 1 Nos Outgoing : 63 AMP TNP-2 NOS. OR outgoing as per site requirment
2
55000
110000
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
48
63
3024
... More
Supply & fixing of A.C 230/250 Volts,50 Hz exhaust fans including providing m.S bolts,mounting frame and other acessories including connections etc.complete as required 450 mm sweep as per directionof E/I Makebajaj,Cromption or Equivalent.
22
1750
38500
... More
Supply and laying of aluminium conducter PVC insulated armoured served sheathed cables 1100 volts grate at a depth of below ground lvl over a cusion of 75 mm thick sand alround and protected with burnt on side and on top ,On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by E/I complete in all respects,The armouring of the cable shall be properly connected with the earth conductor by clamps atc. (i) 10 Sq. mm 2core
978
270
264060
... More
(ii) 70 Sq. mm 3.5 core
459
550
252450
... More
Supply and Fixing of battern/angle holder complete in all respect. Ele S.O.R 2018 SI NO 405
45
57
2571.3
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
28
868.8
... More
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required. Ele SOR 2018 SI.No 1122A
5
1120
5600
... More
Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects. For 1.5 sqmm to 6.00 sqmm & 6.00 to 10.00 Sqmm
45
16
728.55
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Inchage.Ele SOR 2018 SI.No 503 B 10.00 sqmm 2 core
8
76
609.52
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Inchage.Ele SOR 2018 SI.No 503m 70.00 sqmm 3.5core
8
189
1516.16
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
14
4650
65100
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
16
4500
72000
... More
Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required .White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
31
1600
49600
... More
Providing and fixing white vitreous china padestal for wash basin completely recessed at the back for the reception of pipes & fittings.
3
1150
3450
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 40mm/32 mm dia
39
82
3233.1
... More
Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required.510x1040 mm bowl depth 250 mm
4
4800
19200
... More
Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
31
1100
34100
... More
Providing and fixing stainless steel towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
31
491
15241.15
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
31
116
3618.94
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole
32
35
1150.4
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
28
154
4317.32
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
44
450
19800
... More
Supply & fixing of UPVC S.W.R Nahni trap size 100/75mm, 100/90mm confirming to is - 14735 self cleaning design fixed in PCC 1:2:4 & Supply & fixing of 125mm dia heavy duty CP brass jali
44
865
38060
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 20 mm nominal outer dia .Pipes.
12
232
2787.6
... More
25 mm nominal outer dia .Pipes.
540
278
150368.4
... More
32 mm nominal outer dia. Pipes.
395
359
142093.35
... More
40 mm nominal outer dia. Pipes.
237
487
115530.39
... More
50 mm nominal outer dia. Pipes.
186
647
120488.94
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) ball valve, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 25 mm dia .Pipes.
4
104
419.04
... More
32 mm dia. Pipes.
4
142
571.44
... More
40 mm dia. Pipes.
4
219
876.2
... More
50 mm dia. Pipes.
4
266
1066.68
... More
75 mm dia. Pipes.
3
333
999.99
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes.
92
345
31758.4
... More
20 mm nominal outer dia .Pipes.
120
372
44736
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 40 mm dia. nominal bore
100
427
42790
... More
50 mm dia. nominal bore
85
528
44923.35
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
2
374
748.86
... More
25 mm nominal bore
18
431
7768.98
... More
32 mm nominal bore.
18
478
8607.78
... More
40 mm nominal bore
4
572
2291.48
... More
50 mm nominal bore
6
711
4271.64
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Shoe (Plain) 90 mm Shoe
7
64
451.92
... More
110 mm Shoe
6
91
548.58
... More
Supply & fixing of UPVC S.W.R Plain Tee Confirming to IS -14735 90X90X90MM size
20
228
4571.4
... More
Supply & fixing of UPVC S.W.R Plain Tee Confirming to IS -14735 110x110x110mm Size
20
252
5047.6
... More
Supply & fixing of UPVC S.W.R Plain bend Confirming to IS -14735 90mm Size
41
180
7418.95
... More
Supply & fixing of UPVC S.W.R Plain bend Confirming to IS -14735 110 mm Size
45
195
8785.8
... More
Supply & fixing of UPVC S.W.R Door Y Confirming to IS -14735 90mm Size
28
233
6533.24
... More
Supply & fixing of UPVC S.W.R Door Y Confirming to IS -14735 110 mm Size
26
309
8047.52
... More
Supply & fixing of UPVC S.W.R Cowel Confirming to IS -14735110 mm Size
10
85
857.1
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) all-round S.W. R pipes including bed concrete as per standard design : 110 mm diameter S.W.R pipe
156
798
124503.6
... More
160 mm diameter S.W.R pipe
178
976
173761.82
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet : Sand cast iron S&S as per IS - 3989
55
1369
75332.95
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia
133
261
34807.43
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). 25 mm nominal bore
11
321
3539.8
... More
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.
35
67
2372.3
... More
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931.
30
351
10543.5
... More
Providing and fixing 15 mm nominal bore C.P brass long nose/long body bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
30
553
16601.4
... More
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931.
22
398
8761.72
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank. 5000 litres capacity
7500
7
57225
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia
110
257
28322.8
... More
Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
33
51
1711.71
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
146
244
35653.2
... More
S/F upvc S.W.R. pipe type -B confirming to IS 13592 complete in all respect 90 mm O.D
72
361
26056.8
... More
110 mm diameter S.W.R pipe
88
428
37714.16
... More
160 mm diameter S.W.R pipe
106
742
78743.16
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With bricks of class designation M 150 (i) For Sewer Line size 90x80 cm 45 cm
15
8900
133500
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 1 16 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
18500
92500
... More
Inside dimensions 600x850 mm and 45 cm deep for pipe line with three or more inlets :
9
6800
61200
... More
Extra for depth for manholes Size 90x80 cm With common burnt clay with bricks of class designation 15
10
6300
63000
... More
Size 120X90 cm With common burnt clay with bricks of class designation 15
2
7500
15000
... More
Providing and fixing square mouth upvc Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x160 mm size P type
10
1850
18500
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar
60
377
22663.2
... More
Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729
34
724
24632.66
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
18627
55882.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
151.09
123
18597.67
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
153
211
32286.06
... More
In all kind of soil upto 3.0m to 4.5m. Depth
36.41
298
10884.77
... More
In all kind of soil upto 4.5 m to 6.0m. Depth
10.54
386
4077.72
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size)
2.24
5463
12238.04
... More
First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc reqiored for proper completion of the work. Cement mortar 1:6 (1 cement : 6 coarse sand)
24.14
6298
152053.03
... More
Providing and laying in position R.C.C specified grade including the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size)
10.06
11100
111666
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
353
78
27710.5
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
63.52
247
15740.89
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
42
377
15864.24
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
3
813
2439
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
45
572
25766.55
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
65
559
36395.45
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
12.13
1046
12699.87
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
13.11
1066
13984.57
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
1066
13984.57
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge.
1
1403
1403.9
... More
Transportation of Rig Machine All types of soil 350 mm dia
120
536
64412.4
... More
Rocky strata including Boulders350 mm dia
60
1243
74596.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (RMS) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150mm nominal size dia
120
559
67191.6
... More
`Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.
25
1403
35097.5
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in- charge.150 mm nominal size dia having minimum wall thickness 5.00 mm.
120
1367
164121.6
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
45
1457
65601.9
... More
Supplying & Installation of 7.5 Hp submersible pump B.S or K.S.B or equivalent make with finolex cable 1x3x2.5 squmm(upto 75mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as MCB of 0-25Amp (Havell or Indocopp or MDS make), Volt & Ampere meter (AE make), single phase preventer (Minilac or VSP -1 make) starter (L&T or BCH make) etc of approved make, 40mm HDPE Pipe (25 mtr) and all accessories complete as per requirement of site. a) Contractor shall include the rate of electrical control panels complete with all accessories &controls, all Electrical/Mechanical items as required to operate the system automatic/manual. b) Contractor to select suitable HP of pumps . c) Level Controller with sufficient nos. of low / high level alarms, contacts with electrodes and control wiring for the automatic operation of water supply pumps, Submersible Sump Pumps, to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks shall be provided.Domestic water pumps must start at low water level in overhead domestic water tank & stop at high level in that water tank. Dry running protection shall be provided for all the pumps.Sequencing shall be provided for each set of pumps.
1
290317
290317.5
... More
Supplying Installation testing & Commissioning of Remote red LED alarm indicator on single gauge stainless steel plate.
60
203
12220.2
... More
Supplying Installation testing & Commissioning of Intelligent Addressable Manual Call points-double action Break Glass cum pull station suitable for wall/column mounting.
9
2855
25703.1
... More
Supplying Installation testing & Commissioning of Intelligent Addressable Hooter cum multi carriar strobe, Unit as per specifications and customization of intensity selection as 15, 30, 75 or 110 cd of strobe unit is possible by panel. Sounder sum strobe will be driven by supervised 24 V DC input and will give 70 db output at 3 m strobe unite will be synchronized 1 Hz strobe flash rate for better evacuation in complete facility.
9
2384
21459.51
... More
Supplying Installation testing & Commissioning Intelligent Addressable single Addressable Control Relay Module-Form "C" contact type.
9
2215
19939.59
... More
Supply laying testing & Commissioning of 2 corex 1.5 sr.mm single standard copper conductor, PVX insulated armoured cable.
96
264
25426.56
... More
CO2 type extinguisher 4.5 kg.
8
11450
91600
... More
ABC Type extinguisher 6 kg.
8
8600
68800
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%