Uttar Pradesh Expressways Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Expressways Industrial Development Authority - UPEIDA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date6 Jan 2024
Closing DateCancelled
Tender Amount₹ 1,53,00,000
Costs
EMD
₹ 15,30,000Document Cost
₹ 2,714Tender Fee
Refer Documents
Summary
Construction Of 3 No. Gate For Uttar Pradesh Defence Industrial Corridor (updic)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPEID_877958_1Tender No
6055/2976/UPEIDA/TECH DT. 30.12.2023Tender Authority
Uttar Pradesh Expressways Industrial Development Authority ViewPurchaser Address
-Website
http://http://www.upeida.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Foundations, footings, bases of columns, etc. for mass concrete under floor-
15.72
95876
6099
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note Cement content considered in this item is @ 330 kg/cum excess/less cement used as per design mix id payable / recoverable separately).
All work upto plinth level.
186.38
1408287
7556
First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work
0.32
2086
6519
Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm part including drilling 12 mm diameter hole and plugging with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor with chlorpyrlphos/lindane E.C. 20% with 1% concentration
65.3
14235
218
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
9.82
8278
843
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
18.36
1578
86
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
77.48
395767
5108
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
21.12
107880
5108
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note Cement content considered in this item is @ 330 kg/cum excess/less cement used as per design mix id payable / recoverable separately).
All work above plinth level upto floor V level.
235.6
1935218
8214
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
70.36
11890
169
Suspended floors, roofs, landings, balconies and access platform
592.14
217907
368
Lintels, beams, plinth beams, girders, bressumers and
467.1
140597
301
Columns, Pillars, Piers, Abutments, Posts and Struts
855.96
333824
390
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and abobe plinth lvl.
Up to Plinth Lvl-
150.86
1339920
8881.88
Above Plinth Lvl-
361.34
3209378
8881.88
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1557.6
177566
114
Steel work welded in built up section/frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required. In grating, frame, guard bar, ladder, railings, brackets, gates and similar works
6644.7
631246
95
Providing & fixing fly proof wire gauze to windows, clearstory windows & doors with M.S. flat 15x3 mm and nuts & bolts complete.
Stainless steel (grade 304) wire gauze of 0.5 mm dia wide and 1.4 mm aperture on both sides.
20.56
12644
615
12 mm cement plaster of mix:
1:6 (1 cement : 6 coarse sand)
688.2
120435
175
15mm cement plaster in single coat on fair side of single or half brick wall of mix:
1:4 (1 cement : 4 coarse sand)
641.06
139110
217
Providing and laying Vitrified floor tiles Kajariya KERRO Brand or Equivailent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0.80% and confirming to IS 15622 of approved make in all colors & shade laid on 20mm thick cement mortar 1:4 (1cement 4 coarse sand) including grouting the joint with white cement and matching pigments etc complete (Size of tiles 600x600mm) [Flooring]
55.1
63199
1147
Providing and laying Vitrified floor tiles Kajariya KERRO Brand or Equivailent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0.80% and confirming to IS 15622 of approved make in all colors & shade laid on 20mm thick cement mortar 1:4 (1cement 4 coarse sand) including grouting the joint with white cement and matching pigments etc complete (Size of tiles 600x600mm) [Skirting] -
13.56
15553
1147
25mm Thick Kota Stone Slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mix with pigment to match the shade of slab includig rubbing and polishing complete with base of cement morter 1:4.
4.8
7814
1628
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) joining with grey cement slurry @3.3 kg/sqm, including pointing the joints with white cement and matching pigment etc, complete.
10.2
10169
997
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
47.46
42476
895
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick (for cupboard) including ISI marked stainless steel butt hinges with necessary
25.2
36414
1445
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm. -
14
6902
493
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm -
14
952
68
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.
28
672
24
ONE primeing coat & one coat oil distemper on newb work including supply of all material, labour and t& p etc. requried for proper completion of work. As in item no.649 above but for every coat after the first coat.
1141.2
107272
94
Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Two Coat)
641.06
51284
80
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
20.56
16879
821
Painting or vanishing two coats on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of work.Paint to be used should confirm to the I.S.I No.103 1950
240.54
27421
114
Painting or vanishing two coats on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of work.Paint to be used should confirm to the I.S.I No.103 1950
25.2
2872
114
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar
of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing
the surface with trowel with neat cement slurry and making
pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test.“All
above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
453
522309
1153
Wiring point for light with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash.
50
32700
654
Wiring point for fan/fresh air fan (light duty exhaust/ Ceiling fan) with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash.
6
4290
715
Wiring point for plug with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & socket etc complete in all respects including matching color wash.
20
8200
410
Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
8
2720
340
Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve (CAT-A)
16
4160
260
Supply & wiring of sub main with FRLSH P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge thick PVC coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.
2 x 1.5 sq. mm. with 1.5 sq.mm earth wire In 20 mm dia conduit.
40
4200
105
2 x 2.5 sq. mm. with 1.5 sq.mm earth wire In 20 mm dia conduit.
200
24200
121
2 x 4 sq. mm. with 2.5 sq. mm earth wire In 25mm dia conduit.
160
23840
149
2 x 10 sq. mm. with 6 sq. mm earth wire In 32mm dia conduit.
100
27200
272
Supply fixing and concealing 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS no 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finised to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of work. (for Telephone / Television / circuits) 20 mm dia. conduit (16 SWG) thick
40
2480
62
25 mm dia. conduit (16 SWG) thick
20
1440
72
S/F of surface/flush mounting SPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.
8 WAYS ( CAT A )
2
3800
1900
S/F of surface/flush mounting TPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.
S/F of 40 Amp DP MCB (10 KA) ( CAT A )
2
2360
1180
Eraction and testing of ceiling fan and regulator for room height upto 3.5 meters including including supply of 3mm thick GI pipe 19mm dia, Duly painted, completed in all respect.
4
560
140
Erection and testing of exhaust/ wall fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.
2
390
195
S/F of hexagonal fan box with hexagonal/ round GP Fan box of approved make made up of 1.0 mm thick ISI marled GP sheet spot welded four to eight holes of 25.4 mm for pip[e entry of the box. Holes should be semi shuttered tyupe with 0.5 mm GP sheet made upper & lower cover duly screwed fitted with 300mm round zink coated MS bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T&P etc. for proper completion of work.
4
600
150
Supply & fixing of electronic Fan regulator, dimmer, 120-280 V ISI marked, on the existing switch board including making connections, required material, labour T/P etc. for proper completion of work to the satisfaction of Engineer of work.
4
1068
267
S/F of door chime on Polished M.D.F.E.G. board including making connections etc. complete in all respects.
2
400
200
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length upto 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducting the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip with be extra) Make: As approved in U.P.P.W.D., & C.P.R.I Certified.
4
25800
6450
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects.
80
7200
90
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
40
8000
200
Supply and fixing of recess/surface/ Pendent mounting round 10 Watt to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects. ( CAT - AAA )
2
2700
1350
Supply and fixing of LED tube light with batten suitable for uo to 1 x 22 watt LED tube light fitting including tube on surface completein all respect. (CAT - AAA)
10
11900
1190
Supply and fixing of single LED light wall bracket 3 to 6 watt on matching M.D.F.E.G Board base etc. completed in all respects. ( CAT - AAA )
2
5200
2600
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.
16
211040
13190
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set
confirming to IP 65 and above protection complete in all respect.
4
33640
8410
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
8
1944
243
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
Telephone Socket outlet
8
952
119
Supply and drawing following pair, 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel/ PVC conduit as required.
1 Pair
160
3040
19
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
150 mm dia
40
23920
598
5 pair Tag Block
2
326
163
Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables 0.5mm with suitable clamps, saddles and including making terminal joints complete as required
5 pair
40
1600
40
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI marked complete as required.
1200 mm sweep, 50W, 350 RPM
4
8764
2191
Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts, mounting frame and other accessories etc. complete 250 mm sweep 1250 rpm
2
4882
2441
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size.
580x440 mm with integral type foot rests
8
25400
3175
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 550x400 mm with a 15 mm C.P. brass single hole basin mixer.
8
24904
3113
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
8
6155
769.38
Providing and fixing toilet paper holder :
C.P. brass
16
8699
543.69
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
16
9392
587
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore
8
4600
575
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8
1640
205
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
332
41.6
Providing and fixing soil, waste and vent pipes :
100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
32
28992
906
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
Concealed work including cutting chases and making good the walls etc.
15 mm nominal outer dia .Pipes.
140
39760
284
20 mm nominal outer dia .Pipes.
60
19140
319
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
20 mm dia nominal bore
8
6488
811
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
800
8800
11
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
111.19
21904
197
Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation
7.46
45498
6099
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
0.64
108
169
Same as above but for under floor-
5.85
35679
6099
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.(Note Cement content considered in this item is @ 330 kg/cum excess/less cement used as per design mix id payable / recoverable separately).
All Work UP TO PLINTH LVL.
49.05
370621
7556
First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work
0.05
325
6519
Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm part including drilling 12 mm diameter hole and plugging with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor with chlorpyrlphos/lindane E.C. 20% with 1% concentration
15.76
3435
218
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1.2
1011
843
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
5.89
506
86
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
27.93
142666
5108
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
4.87
24875
5108
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note Cement content considered in this item is @ 330 kg/cum excess/less cement used as per design mix id payable / recoverable separately).
All work above plinth level upto floor V level.
53.86
442406
8214
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
44.51
7522
169
Suspended floors, roofs, landings, balconies and access platform
164.4
60499
368
Lintels, beams, plinth beams, girders, bressumers and
171.33
51570
301
Columns, Pillars, Piers, Abutments, Posts and Struts
108.68
42385
390
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and abobe plinth lvl.
Up to Plinth Lvl-
48.76
433080
8881.88
Above Plinth Lvl-
85.91
763042
8881.88
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
377.5
43035
114
Steel work welded in built up section/frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required.
In grating, frame, guard bar, ladder, railings, brackets, gates and similar works
1488.82
141437
95
Providing & fixing fly proof wire gauze to windows, clearstory windows & doors with M.S. flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wide and 1.4 mm aperture on both sides.
4.42
2718
615
15mm cement plaster in single coat on fair side of single or half brick wall of mix:
1:4 (1 cement : 4 coarse sand)
115.43
25048
217
12 mm cement plaster of mix:
1:6 (1 cement : 6 coarse sand)
257.26
45020
175
Providing and laying Vitrified floor tiles Kajariya KERRO Brand or Equivailent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0.80% and confirming to IS 15622 of approved make in all colors & shade laid on 20mm thick cement mortar 1:4 (1cement 4 coarse sand) including grouting the joint with white cement and matching pigments etc complete (Size of tiles 600x600mm) [Flooring]
7.98
9153
1147
Providing and laying Vitrified floor tiles Kajariya KERRO Brand or Equivailent brand of super quality in different size (thickness specified by manufacture) with water absorption less than 0.80% and confirming to IS 15622 of approved make in all colors & shade laid on 20mm thick cement mortar 1:4 (1cement 4 coarse sand) including grouting the joint with white cement and matching pigments etc complete (Size of tiles 600x600mm) [Skirting]
1.7
1949
1147
25mm Thick Kota Stone Slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mix with pigment to match the shade of slab includig rubbing and polishing complete with base of cement morter.
2.98
4851
1628
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) joining with grey cement slurry @3.3 kg/sqm, including pointing the joints with white cement and matching pigment etc, complete.
2.33
2323
997
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11.23
10050
895
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick (for cupboard) including ISI marked stainless steel butt hinges with necessary screws,
2.1
3034
1445
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm.
3
1479
493
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm
3
204
68
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.
6
144
24
ONE primeing coat & one coat oil distemper on newb work including supply of all material, labour and t& p etc. requried for proper completion of work. As in item no.649 above but for every coat after the first coat.
241.94
22742
94
Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Two Coat)
257.26
24182
94
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
4.42
3628
821
Painting or vanishing two coats on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of work.Paint to be used should confirm to the I.S.I No.103 1950
67.64
7710
114
Painting or vanishing two coats on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of work.Paint to be used should confirm to the I.S.I No.103 1950
5.25
598
114
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with water proofing compound conforming
to IS. 2645 and approved by Engineer-in-charge over the RCC
slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats
25 mm to 115 mm size with 50% of cement mortar 1:5 (1cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of
cement slurry using 2.75 kg/ sqm of cement admixed with
water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for aminimum period of two weeks for curing and for final test.“All
above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
132.43
152691
1153
Wiring point for light with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash.
15
9810
654
Wiring point for fan/fresh air fan (light duty exhaust/ Ceiling fan) with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash.
1
715
715
Wiring point for plug with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in thick PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 Sq.mm copper earth continuity wire & modular type switch & socket etc complete in all respects including matching color wash.
5
2050
410
Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
2
680
340
Supply and fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve (CAT-A)
4
1040
260
Supply & wiring of sub main with FRLSH P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge thick PVC coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.
2 x 1.5 sq. mm. with 1.5 sq.mm earth wire In 20 mm dia conduit.
15
1575
105
2 x 2.5 sq. mm. with 1.5 sq.mm earth wire In 20 mm dia conduit.
50
6050
121
2 x 4 sq. mm. with 2.5 sq. mm earth wire In 25mm dia conduit.
40
5960
149
2 x 10 sq. mm. with 6 sq. mm earth wire In 32mm dia conduit.
25
6800
272
Supply fixing and concealing 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS no 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finised to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of work. (for Telephone / Television / circuits) 20 mm dia. conduit (16 SWG) thick
10
620
62
25 mm dia. conduit (16 SWG) thick
5
360
72
S/F of surface/flush mounting SPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.. 8 WAYS ( CAT A )
1
1900
1900
S/F of 40 Amp DP MCB (10 KA) ( CAT A )
1
1180
1180
Eraction and testing of ceiling fan and regulator for room height upto 3.5 meters including including supply of 3mm thick GI pipe 19mm dia, Duly painted, completed in all respect.
1
140
140
Erection and testing of exhaust/ wall fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects.
1
195
195
S/F of hexagonal fan box with hexagonal/ round GP Fan box of approved make made up of 1.0 mm thick ISI marled GP sheet spot welded four to eight holes of 25.4 mm for pip[e entry of the box. Holes should be semi shuttered tyupe with 0.5 mm GP sheet made upper & lower cover duly screwed fitted with 300mm round zink coated MS bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T&P etc. for proper completion of work.
1
150
150
Supply & fixing of electronic Fan regulator, dimmer, 120-280 V ISI marked, on the existing switch board including making connections, required material, labour T/P etc. for proper completion of work to the satisfaction of Engineer of work.
1
267
267
S/F of door chime on Polished M.D.F.E.G. board including making connections etc. complete in all respects.
1
200
200
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length upto 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducting the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip with be extra) Make: As approved in U.P.P.W.D., & C.P.R.I Certified.
1
6450
6450
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects.
20
1800
90
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
10
2000
200
Supply and fixing of recess/surface/ Pendent mounting round 10 Watt to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects. ( CAT - AAA )
1
1350
1350
Supply and fixing of LED tube light with batten suitable for uo to 1 x 22 watt LED tube light fitting including tube on surface completein all respect. (CAT - AAA)
3
3570
1190
Supply and fixing of single LED light wall bracket 3 to 6 watt on matching M.D.F.E.G Board base etc. completed in all respects. ( CAT - AAA )
1
2600
2600
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.
4
52760
13190
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set
confirming to IP 65 and above protection complete in all respect.
1
8410
8410
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
2
486
243
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
Telephone Socket outlet
2
238
119
Supply and drawing following pair, 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel/ PVC conduit as required
1 Pair
40
760
19
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required..
150 mm dia
10
5980
598
Providing, fixing, connecting & testing of Telephone Tag Block krone type in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure duly painted by synthetic enamel over anti corrosive primer, lockable and hinged cover with provision for cable through glands complete in all respects. 5 pair Tag Block
1
163
163
Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables 0.5mm with suitable clamps, saddles and including making terminal joints complete as required.
5 pair
10
400
40
Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps & regulator etc. ISI marked complete as required.
1200 mm sweep, 50W, 350 RPM
1
2191
2191
Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts, mounting frame and other accessories etc. Complete.
250 mm sweep 1250 rpm
1
2441
2441
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
1
3175
3175
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 550x400 mm with a 15 mm C.P. brass single hole basin mixer.
1
3113
3113
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
1
769
769.38
Providing and fixing toilet paper holder :
C.P. brass
1
543
543.69
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
1
587
587
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore
1
575
575
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
205
205
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
41
41.6
Providing and fixing soil, waste and vent pipes :
100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
4
3624
906
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
Concealed work including cutting chases and making good the walls etc.
15 mm nominal outer dia .Pipes.
25
7100
284
20 mm nominal outer dia .Pipes.
10
3190
319
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
20 mm dia nominal bore
1
811
811
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
100
1100
11
All Item Rate are Excluding GST
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements