Uttar Pradesh Expressways Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Expressways Industrial Development Authority - UPEIDA Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date20 Feb 2024
Closing Date27 Feb 2024
Tender Amount₹ 4,69,77,491
Costs
EMD
₹ 24,88,000Document Cost
₹ 2,714Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPEID_873448_3Bid Award Id
ViewTender No
5853 DT. 20-12-23Tender Authority
Uttar Pradesh Expressways Industrial Development Authority ViewPurchaser Address
-Website
http://http://www.upeida.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and laying of aluminium conductor PVC insulated amoured served sheathed cables 1100 Volts grade at depth of 750mm below ground level over a cushion of 75mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the cable shall be properly connected with the earth conductor by clamps. etc. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.501 and Page No. 127)
10 sq.mm 4 core
2550
833850
327
16 sq.mm 4 core
3450
1183350
343
25 sq.mm 3.5 core
200
74600
373
35 sq.mm 3.5 core
1000
422000
422
50 sq.mm 3.5 core
200
98400
492
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.503 and Page No. 128)
10 sq.mm 4 core
102
8874
87
16 sq.mm 4 core
138
12006
87
25 sq.mm 3.5 core
2
246
123
35 sq.mm 3.5 core
2
356
178
50 sq.mm 3.5 core
2
356
178
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing ofpoles also). Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.702 and Page No. 136)
18
96300
5350
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.704 and Page No. 137)
4
40680
10170
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.716 and Page No. 138)
450
40500
90
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.718 and Page No. 138)
100
111000
1110
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.721 and Page No. 139)
2160
432000
200
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.649 and Page No. 134)
51
1423920
27920
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.650 and Page No. 134)
69
1963740
28460
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66 Protection complete in all respects CAT-AAA Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per UPSOR 2018 item no.1425(A) and Page No. 197)
189
2492910
13190
Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.653 and Page No. 135)
2
628000
314000
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium
housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per UPSOR 2018 item no.1455 and Page No. 199)
24
546000
22750
DSR ITEMS
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. (As per DSR 2022 item no.10.4 and Page No. 32)
300 sq. mm
1
16249
16249
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per DSR 2022 item no.10.5 and Page No. 32)
300 sq. mm
1
22795
22795
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.(As per DSR 2022 item no.14.16.1 and Page No. 43)
63 mm dia (OD-63 mm & ID-51 mm nominal)
7560
1867320
247
NON SOR ITEMS
Supply and fixing of multi core round FRLSH PVC insulated copper (flexible) conductor & PVC sheathed cables 1100Volts as per IS:694-1990 of approved make. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
(30/0.25 mm) Three core 1.5 sq.mm.
1200
49200
41
Supply and laying of 11kV (E) grade XLPE insulated PVC sheathed compact circular armoured aluminium conductor HT power cable, insulation screened with extruded semi conducting compound in combination with copper tape suitable for 11kV earthed system confirming to relavent standard complete as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
3 x 300 sq. mm Al. XLPE
200
380000
1900
Supply, installtion, testing and commissioning of Outdoor Packaged substaion with all necessary componetns like, 100 KVA 11KV/0.433 KV Dry Type TRANSFORMER, RMU (2nos. 630 Amp of LBS and 1no. 630A VCB) , LT ACB of 630 A TPN as INCOMER & 6/8 Nos 100/63A TPN MCCB as OUTGOINGS, in built in the enclsoure with 50 kvar (1 x 30 KVAR + 2 x 10 KVAR) capacitor panel. the technical specifications for the enclsoure, mouting arrangments, fixing of the Component, HT Gear, LT SwitchGear and Capacitor panel shall be specifications attached and to be fully complied including civil pedestal. Complete Package Substation including RMU, PSS enclosure and LV switchgears shall be made/supply of same OEM. RMU (2no.s 630 Amp LBS and 1no. 630 A VCB) Short time current 21KA for 3 sec, Internal Arc 20 KA for 1 sec. Dry Type Transformer 100KVA, 11KV/0.433KV with Off Circuit Tap Changer as per latest IS Standard, 100 kVA continuous duty cycle, 11kV/433V, 3 phase, 50Hz, Dyn-11 vector group, step down, indoor type with IP23 or better enclosure, copper wound, dry type - Resin Casted transformer complete with off load tap changer & with all accessories, including winding temperature scanner with alarm and trip contact, fittings and conforming to specifications. Tap changing range shall be , ±5% in steps of 2.5%. Transformer shall have cable box for 11kV XPLE cable on HT side & Busduct / Cable box on medium voltage side. Transformer shall meet standard norms on NO LOAD & ON LOAD power losses as per ECBC Level 2. Transformer should also have winding Temperature indicator. LT ACB of 630 A TPN as INCOMER & 6/8 Nos 100/63A TPN MCCB as OUTGOINGS, MCCB microprocessor type, Ics=Icu=100%, 50KA complete as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
1319696
1319696
Supply, Installation, Testing & Commissioning of Street Light Feeder Pillar, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free standing, floor mounting, dust and vermin proof, powder coated, outdoor type, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket, IS 8623 etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories complete as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
Incomer.-
100A FP 25kA MCCB with microprocessor based release with adjustable OL, SC and EF protection - 1 nos. Busbar.-
1 Set of 150 A TPN busbars of high conductivity electrolytic quality Aluminium alloy.
Instruments.-
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
100//5A 5VA class 1 resin cast CT - 1 set
Outgoing.-
63 A 4P 25kA MCCB, microprocessor based release having adjustable O/L, SC protection - 1 nos. 63 A 4P 10kA MCB - 5 nos. 40 A DP 10kA MCB- 2 nos
4 nos timer swich.
Necessary space provision and control wiring for satisfactory operation of Astronimical time switch for automatic switching ON & OFF of street lights.
1
48198
48198
Designing and construction of pedestal (plinth) for transformer of desired size including excavation in hard rock/soft rock, base concrete M-7.5 (1:4:8), 20mm metal and pedestal of RCC M-15 (1:2:4) including required tar steel reinforcement for required height as per IE rules from base concrete including shuttering and finishing with 10mm thick plaster in cement mortar 1:3 curing & white washing etc. complete as per specifications. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
20
217920
10896
Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M- 15 (1:2:4) (20 mm graded metal) foundation, including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
60
116760
1946
EXTRA ELECTRICAL WORKS-AROUND BUILDINGS
PART (A) - SCHEDULED ITEMS ( AS PER UP SOR 2018)
S/F of danger board fabricated from 10 gauge M.S. sheet as per E/I rules. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
5
425
85
S/F of shock treatment chart ( prescribed under I.E.rules ) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P etc for proper completion of work. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
10
3050
305
Supply and laying of 1800 mm x 900 mm x 20 mm thick chequered rubber matting of tested quality. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
30
76500
2550
Supply and laying of aluminium conductor PVC insulated amoured served sheathed cables 1100 Volts grade at depth of 750mm below ground level over a cushion of 75mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable respect. The armouring of the cable shall be properly connected with the earth conductor by clamps. etc. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST. 6 sq.mm 3 core
450
127800
284
10 sq.mm 4 core
150
49050
327
16 sq.mm 4 core
200
68600
343
25 sq.mm 3.5 core
200
74600
373
35 sq.mm 3.5 core
650
274300
422
50 sq.mm 3.5 core
1450
713400
492
70 sq.mm 3.5 core
250
153250
613
95 sq.mm 3.5 core
200
140000
700
120 sq.mm 3.5 core
120
98880
824
185 sq.mm 3.5 core
230
262200
1140
240 sq.mm 3.5 core
340
468860
1379
300 sq.mm 3.5 core
510
822630
1613
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
6 sq.mm 3 core
12
912
76
10 sq.mm 4 core
6
522
87
16 sq.mm 4 core
8
696
87
25 sq.mm 3.5 core
6
738
123
35 sq.mm 3.5 core
8
1424
178
50 sq.mm 3.5 core
12
2136
178
70 sq.mm 3.5 core
4
796
199
95 sq.mm 3.5 core
4
888
222
120 sq.mm 3.5 core
4
972
243
185 sq.mm 3.5 core
4
1588
397
240 sq.mm 3.5 core
10
4730
473
300 sq.mm 3.5 core
14
7070
505
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length upto 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducting the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I. strip with be extra) Make: As approved in U.P.P.W.D., & C.P.R.I Certified. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
20
129000
6450
Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
200
34000
170
Supply and fixing of vertical air termination final rod comperising of 300mm long x 25 mm dia. Coper rod with one one pointed prong and 100mm dia x 3 mm thick base plate etc complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
10
13300
1330
Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc on approved clamps on surface for lighting conductor complete in all respect ( for two storyed buildings). Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
200
62000
310
Supplying & Laying of 25mm x 3mm. G.I. strip for earthing purpose as required complete in all respects. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1000
90000
90
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2000
400000
200
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
16820
8410
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
26380
13190
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
10
227500
22750
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
19
280250
14750
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
3
45840
15280
Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
9
188010
20890
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
56
276640
4940
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
149
1318650
8850
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
24
97680
4070
Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia
minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for
high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8
mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates
etc completee in all respect. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
314000
314000
PART (B) - SCHEDULED ITEMS ( AS PER DSR 2022) Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1 Run of Cable
2500
123700
49.48
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
150 mm dia
450
282834
628.52
250 mm dia
650
550173
846.42
PART-C MARKET RATE ITEMS
LAN SYSTEM
Supply,installation,testing and commisioning of 12 port unmanaged ethernet switch with 2 nos fiber ports. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
43730
21865
Supply,installation,testing and commisioning of 24 port unmanaged ethernet switch with 2 nos fiber ports. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
6
197334
32889
Supply,installation,testing and commisioning of Cat-6 shuttered 12 port fully loaded patch panel with 2 nos fiber ports. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
8222
4111
Supply,installation,testing and commisioning of 24 port Patch panel fully loaded, Cat-6 UTP Keystone Type. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
9
41229
4581
Supply,installation,testing and commisioning of Cat-6 UTP 24AWG patch cord, 1 meter, Plug 30U, snaglless etc as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
200
57600
288
Supply,installation,testing and commisioning of Cat-6 UTP 24AWG patch cord, 2 meter, Plug 30U, snaglless etc as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
46
15042
327
Supply , Installation , Testing and Commissioning of 24 PoE 10/100/1000 BaseT, 2 SFP+ 1G/10G ports, one expansion slot. Includes an internal 390W PoE PSU, power cord, manuals access card, RJ-45 to DB-9 adaptor with 2 nos fiber ports. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
6
328890
54815
Supply,installation,testring and commisioning of Floor mounted 42 U Server Rack along with all standard accessories 800mm (W), 800mm (D), approx. Wt.150 Kg, CRCA 'D' grade 1.6mm thick sheet, pwoder coated for cabinet RAL- 9002, 4mm Toughened Tinted Glass Door and along with following accessories. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.:- 1. Cooling fan 220/230V AC, of 90 CFM-------4 Nos.
2. Cable manager Metal 4 Nos.
3. PDU- 230V /AC 1 No.
4. Cable Channel 100mm wide. 2 Nos.
5. Heavy Duty Stationary Shelf 600mm(W)X475mm(D) -1
6. Mounting Hardware (20 Sets of M-6 screws, washers,cage, nuts (Nickle Coated)- 3 Nos.
7. Earthing strips copper 150mm H 1 No.
8. Door Lock 1 No. 9. Caster Wheels (with breake) 2 Nos.
10. Caster Wheels (without breake) 2 Nos. 11. Front Metal Band 1 No
42 U Network Rack as mention above
1
85374
85374
Supply,installation,testring and commisioning of 24 port LIU with SFP Modules with 1 U rack size(SC)-SM having LC connection with all accessories including splice tray, LC adapter plate and pigtail. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
43976
21988
Supply, installation, testing and commissioning of LC -LC duplex 3 meter fiber patch cord. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
12
23028
1919
Supply, installation, testing and commissioning of multi mode fiber trans receiver. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
9
98658
10962
Supply & laying of 6 Core Multimode Indoor OM2 Lazer 50/125 micron Indoor Fiber cable in existing pipe. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1200
116400
97
Supply, installtion, testing and commissioning of Outdoor Packaged substaion with all necessary componetns like, 500 KVA 11KV/0.433 KV Dry Type TRANSFORMER, RMU (2nos. 630 Amp of LBS and 1no. 630A VCB) , LT ACB of 630 A TPN as INCOMER, in built in the enclsoure with 175 kvar (2 x 50 KVAR + 3 x 25 KVAR) capacitor panel. the technical specifications for the enclsoure, mouting arrangments, fixing of the Component, HT Gear, LT SwitchGear and Capacitor panel shall be specifications attached and to be fully complied including civil pedestal. Complete Package Substation including RMU, PSS enclosure and LV switchgears shall be made/supply of same OEM. RMU (2no.s 630 Amp LBS and 1no. 630 A VCB) Short time current 21KA for 3 sec, Internal Arc 20 KA for 1 sec. Dry Type Transformer 500KVA, 11KV/0.433KV with Off Circuit Tap Changer as per latest IS Standard, 400 kVA continuous duty cycle, 11kV/433V, 3 phase, 50Hz, Dyn-11 vector group, step down, indoor type with IP23 or better enclosure, copper wound, dry type - Resin Casted transformer complete with off load tap changer & with all accessories, including winding temperature scanner with alarm and trip contact, fittings and conforming to specifications. Tap changing range shall be , ±5% in steps of 2.5%. Transformer shall have cable box for 11kV XPLE cable on HT side & Busduct / Cable box on medium voltage side. Transformer shall meet standard norms on NO LOAD & ON LOAD power losses as per ECBC Level 2. Transformer should also have winding Temperature indicator. LT ACB of 800 A TPN 50KA complete as required. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
2490390
2490390
MAIN PANEL
Supply, Installation, Testing & Commissioning of Main LT panel, cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as per specification. The panel shall be suitable for receiving Cable / Bus duct to the incomer ACB. Panel shall have potential free contacts to interface with BMS. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
Incomer ----
Busbar ----
Instruments ----
Outgoing.-----
The switchboard shall be complete with all inter connections, risers, internal wiring, labels etc complete as required
1
950000
950000
Supply, Installation, Testing & Commissioning of DG Panel, cubicle type, made out of min 2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as per specification. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
Incomer.-
630A FP 35kA MCCB with ATS microprocessor based release with adjustable OL, SC and EF protection - 1 nos. Busbar.-
1 Set of 800 A TPN busbars of high conductivity electrolytic quality Aluminium alloy and suitable size earthing conductor through out the panel for its earthing. Instruments.-
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.
630/5A 5VA class 1 resin cast CT - 1 set
Outgoing.-
250A FP 35kA MCCB with microprocessor based release with adjustable OL, SC and EF protection - 1 nos. 200 A 4P 35kA MCCB,microprocessor based release having adjustable O/L, SC protection - 2 nos. 160 A 4P 35kA MCCB, microprocessor based release having adjustable O/L, SC protection - 2 nos. 100 A 4P 35kA MCCB, microprocessor based release having adjustable O/L, SC protection - 2 nos.
1
240000
240000
Supply, Installation, Testing & Commissioning of Street lighting panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free standing, floor mounting, dust and vermin proof, powder coated, outdoor type, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket, IS 8623 etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as per specification. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
Incomer.-
63A, TPN, switch disconnector unit (Isolator), AC23, 415V, 50Hz, complete with handle assembly having door interlock - 1 no. Busbar.-
1 Set of 100 A TPN busbars of high conductivity electrolytic quality Aluminium alloy. Instruments.-
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
63/5A 5VA class 1 resin cast CT - 1 set
Outgoing.-
40A TP+NL C curve MCB - 4 nos.
16A SP+NL C curve MCB - 2 nos.
Necessary space provision and control wiring for satisfactory operation of Astronimical time switch for automatic switching ON & OFF of street lights.
2
110000
55000
Supply, Installation, Testing & Commissioning of Outdoor Feeder Pillar IP-65, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, free standing, floor mounting, dust and vermin proof, powder coated, outdoor type, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door with neoprene gasket, IS 8623 etc. The panel shall include supply & installation of following switchgears, metering instruments and accessories as per specification. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
Incomer.-
200A FP 35kA MCCB with microprocessor based release with adjustable OL, SC and EF protection - 1 nos.
Busbar.-
1 Set of 250 A TPN busbars of high conductivity electrolytic quality Aluminium alloy. Instruments.-
2A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
1 No 3 phase Digital Multi function meter to read V, A, F Acc class 1.
200//5A 5VA class 1 resin cast CT - 1 set
Outgoing.-
100 A 4P 35kA MCCB, microprocessor based release having adjustable O/L, SC protection - 2 nos. 63 A 4P 35kA MCB, microprocessor based release having adjustable O/L, SC protection - 4 nos. Necessary space provision and control wiring for satisfactory operation of Astronimical time switch for automatic switching ON & OFF of street lights.
1
95000
95000
Supply, installation, testing and Commissioning of SILENT TYPE DIESEL GENERATING SET at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, 0.85 load factor including sound proof acoustic and weather proof enclosure, residential type silencer (as per Updated CPCB-II norms, BEE star rated DG set) fabricated out of CRCA sheet of 14 / 16 SWG thickness with min. 9 tank pretreated before powder coating with ventillation system complete in all respects comprising of the following. -------------
Instrument Panel ----
Alternator -----
Base Frame ----
Inbuilt Fuel tank
AMF Controller with AMF, Protection against…....
Starting system. ----
Ventillation System. ----
400 KVA
1
4253582
4253582
Supply & installation of exhaust gas piping of suitable diameter ( Not less than 6 inch for each exhaust pipe) as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
60
353400
5890
Fabrication of supports for exhaust pipe, fuel pipe or for any other purpose out of M.S. structural steel including supplying and applying of enamel paint of approved shade after one coat of steel primer of reputed company. Rate of work shall include cost of all material, labour,T&P etc.
Note-Structure of chimney height shall be as per CPWD norms to be followed with including ladder ,platform, aviation obstruction light,conventional lighting protection system, The Outdoor exhaust piping shall be supported by free standing MS structure grounted in concrete foundation and shall approved EIC before execution. The work should be as per Electrical Inspectorate / Pollution control board norms. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2000
328000
164
Supply of 11kV (E) grade XLPE insulated sheathed compact circular armoured aluminium conductor HT power cable, insulation screened with extruded semi conducting compound in combination with copper tape suitable for 11kV earthed system confirming to relavent standard. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
3 x 240 sq. mm Al. XLPE
200
433400
2167
Supply, fixing, testing and commissioning & automatic Linear pneumatic Tube Detection based Novec 1230 System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the following components. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
5 LB capacity Novec 1230, DLP Assembly witth automatic valve, push in connector for tube, 5 LB Novec 1230 gas mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.( Utility Panel, UPS Panel)
2
259138
129569
10 LB capacity Novec 1230, DLP Assembly witth automatic valve, push in connector for tube, 10 LB Novec 1230 gas mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. (2 nos VCB panel, 2 nos LT Panel, 1 nos DG Panel etc)
6
1243488
207248
Linear pneumatic heat Detection Tube with all necessary fittings & supports.
120
246720
2056
Master Control Unit for controllin each system, complete with pressure switches, buzzers and electronic hooters, including all necessary acessories +electrical writing to make each entire system functional.
8
42216
5277
Supply, installation, testing and commissioning of 4MP resolution dome camera, 2.8 ~ 12mm (4.3x) varifocal lens, Max. 20fps@4M resolutions, Max. 30fps@2M resolutions, H.265, H.264, MJPEG codec supported, Multiple streaming, Day & Night (ICR), WDR (120dB), Motion detection, Tampering, Defocus detection, micro SD (128GB) memory slot, PoE / 12V DC, IR viewable length 30m, IP66, IK10, Hallway view support, LDC support (Lens Distortion Correction. Product shall comply ONVIF, UL, FCC & CE certified. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
8
277464
34683
Supply, Installation, Testing & Commisioning of 4MP resolution bullet camera, 2.8 ~ 12mm (4.3x) varifocal lens, Max. 20fps@4M resolutions, Max. 30fps@2M resolutions, H.265, H.264, MJPEG codec supported, Multiple streaming, Day & Night (ICR), WDR (120dB), Motion detection, Tampering, Defocus detection, micro SD (128GB) memory slot, PoE / 12V DC, IR viewable length 30m, IP66, IK10, Hallway view support, LDC support (Lens Distortion Correction. Product shall comply ONVIF, UL, FCC & CE certified. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
12
447612
37301
Supply, Installation, Testing & Commisioning of Network video recorder having Video Management Software with built in Video Analytics management and recording solution for up to 64 channels, The intelligent video management software shall enable management and control of live and recorded video, seamlessly integrating analog and digital video components. This shall be designed for small and medium sized deployments and all-in-one architecture shall be based on one standard Server serving as the recording server, system and client also if required, however separate workstation should be offered for client usage. The system shall be easy to install, configure, maintain and provides all levels of security personnel with intuitive and reliable control. This shall enable fast detection of potential threats and emergency event management. The INVMS shall comply with the following requirements, such as Hexaplex Simultaeous functioning of Live, Recordig, Playback, Video Analytics, Alarms Handling, Configuration. The softwar eshould support Hybrid Video inputs, with high FPS recording, Alarms Configuration and Management, High Resolution camera support upto 12MP as minimum, Multi View split view, dewarping view of camera should be supported for High Resolution, and multisensor/fisheye cameras. Map view, Reports and Logs, Quick View Playback, User Pirviledges should be configurable. Product shall comply ONVIF, UL, FCC & CE certified. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
869500
869500
Supply, installation, testing and commissioning of 20 100/1000 SFP ports + 4 Combo 10/100/1000BASE-T/SFP ports + 4 10G SFP+ ports, L2 Management Switch - Core Switch. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
183759
183759
Supply, installation, testing and commissioning of 24 port- Edge PoE switch. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
83528
41764
Supply, installation, testing and commissioning of Patch Panel UTP Keystone- 24 Port- Fully loaded (Cat 6). Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
8688
4344
Supply and installation of Cat 6 UTP patch cord, 1 mtr. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
20
4080
204
Supply, installation, testing and commissioning of Server PC, Intel i7 processor, 24 inch LED monitor, Gigabit LAN port, USB port, 8GB DDR3 RAM,1TB HDD,1GB dual graphic card, 100/1000 LAN ports, optical mouse, Keyboard, DVD Writer. Genuine Win 8.1 Pro - Down grade to Win 7 professional, 24 inch LED monitor. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
1
91880
91880
Supply, installation, testing and commissioning of Surveillance / ESATA compatible Hard Disk of 8TB capacity to achieve the total storage for the NVR server. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
83528
41764
Supply, Installation, Testing & Commissioning of 32 to 38 nch full HD LED monitor with resolution 1920X1080 pixel including wall mounting accessories (location: central control room).Material shall be UL/CE listed. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
116938
58469
Supply and installation of wall mounted 9U rack including cable manager, power supply units etc.to accommodate ehternet switch and fiber patch panel at each floor. Rate of work shall include cost of all material, labour,T&P etc. required for proper completion of work as directed by Engineer-in-Charge including all taxes,labour cess but excluding GST.
2
15036
7518
SUMMARY OF COST 11 KV CONNECTION CHARGES
Demand load-600 KVA
Processing Fee (2 nos Sub-Station) Rs-15000 each
Security Deposit (HT Consumers-4500/KVA)
Meter & Its Equipment (Meter With 11 KV Cubical (Rs. 44709/-) (2 nos Sub-Station) Supply of 11kV (E) grade XLPE insulated sheathed compact circular armoured aluminium conductor HT power cable, insulation screened with extruded semi conducting compound in combination with copper tape suitable for kV earthed system confirming to relavent standard. 3 x 300 or 240 sq. mm Al. XLPE (1900 / METER) PCC POLE 8.5 METER 16 No's (RS-3211/POLE) Misc Supporting Equipments like Insulator, Conductor, Channel, Clamp, wire etc Labour & Cartage @ 3% 1.5% T&P Charges 15% Supervision Charges
1
10407705
10407705.14
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements