Uttar Pradesh Engineering And Labour Cooperative Federation Limited Tender

Providing and laying cement . Concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded Brick ballast aggregate 40 mm nominal size ) including supply of all materials , labour and T & P etc. required for completion of work and curing complete , including cost of form work . in Foundation and floors. S.I. No. 273.

Class-150 brick work in 1:4cement and corssand of mortar in foundation an plinth incluing supply of all material, labour and T&P etc. required for proper completion of the work.

Construction of un-reinforcement plain cement concrete pavement thickness as per design,over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) (1:1.5:3) coarse and fine aggregates conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropiate weight batcher using approved mix design, laid in approved fixed side form work (steel channel laying and fixing of 125 micron thick polythene film, wedges steel plates including levelling the form work as per drawing) spreading the concrete with sloves, rakes compacted using needle, screed and plate vibrators and finished in continuous opration including provision of contraction and expansion construction joints applying debonding strips primer, sealant admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification (approved Quarri grit). S I No. 35 New Item.

Providing and laying cement concrete in C.C. in 4:2:1of not less then strenth of M-15 Stone Ballast (20 mm nominal size ) approved coarse sand and cement , curing complete , including cost of form work . in foundation and floors. S.I. No. 279.

12 mm. thick plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. in grith and finished even and smooth No extra for mixing any additive. 1 cement : 3 coarse sand

S/F of Road sign Board/Patiya Size (4"×3") angle iron 50×50×5 & 20 guage iron sheet with diagonal flat iron 20mm. thick including all necessary fittings T&P required proper completion of work as directed by Engineer - in- charge.