UP State Construction And Infrastructure Development Corporation Limited Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP State Construction And Infrastructure Development Corporation Limited - UPSCIDC Tender
Civil And Construction
Eprocure
Opening Date7 Dec 2021
Closing Date18 Dec 2021
Tender AmountRefer Documents
Costs
EMD
₹ 4,86,000Document Cost
₹ 3,930Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_SCIDC_652422_1Bid Award Id
ViewTender No
223/SE/Jhansi/2021-22Tender Authority
UP State Construction And Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.upscidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
42.08
-
3966.25
... More
Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km (5 miles) from the side of work and including watering , dressing etc. rate to including cost of all material, labour and T&P etc. required for proper completion of the work .(rate is including royality.)
50.2
-
1805
... More
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.
122.8
-
5510
... More
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.
58.94
-
5510
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :.R.C.C. Footing in M20
5.58
-
6450.5
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :R.C.C. Column in M20
6.74
-
8165.25
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Plinth Bend
18.6
-
7343.5
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :R.C.C. Lintel Beams
12.11
-
7343.5
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Loft in M20
12.44
-
7139.25
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Stair in M 20
3.17
-
7139.25
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Slab Beam in M 20
10.42
-
8165.25
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : G.F. R.C.C. Slab in M20
77.91
-
7139.25
... More
Sand Filling in Plinth including supply of necessary quantity of sand from a distance not exceeding 8 km . ( 5 miles ) from the from the site of work and including watering dressing etc. Rate to including cost of all material , labour and T&P etc. required for proper completion of the work .( Rate is including Royality)
85.81
-
1805
... More
Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
51.51
-
3966.25
... More
40 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer’sspecifications. This includes cost of cement slurry, but excluding the
cost of nosing of steps etc. complete.
366.79
-
318.25
... More
Providing and laying damp proof course 2.5 cm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominalisize ) and curing complete.
81.06
-
299.25
... More
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of one brick (230mm) thick .add for extra labour.
138.62
-
6046.75
... More
First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of half brick (4 1/2")(115mm) thick .add for extra labour.
28.28
-
6308
... More
6-10 mm ceiling plaster in 1:3 cement:sand mortar inluding all material labour T&P and safloding omplete
762.78
-
166.25
... More
15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .
1931.96
-
171
... More
12 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .
466.72
-
123.5
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Matt finish Rectified flooring in toilet floor (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
52.94
-
859.75
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.dado/skirting in toilet (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade_)
100.1
-
1377.5
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
697.65
-
84.46
... More
Entrance Door (ED) Aluminium door
12.6
-
3135
... More
Sliding Door shutter with frame (Aluminium )
6.3
-
3135
... More
Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.
1777.53
-
89.4
... More
Supply and fixing of 32cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutter doors.
76.3
-
2256.25
... More
Two coats of enamel paint over one coat of primer to give an even shade Door Painting two coat enemal paint
231.4
-
90.25
... More
20mm Bearing plaster in 1:3 cement:sand mortar with neat finish including supply of materials labour and T&P etc. required for proper completion of the work.
81.06
-
223.25
... More
Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside(Nerolac, Asian, Berger)
2580.91
-
66.5
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Two coat weather coat Apex/ultima (Nerolac, Asian, Berger)
570.24
-
133.46
... More
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete.(Birla, J.K. Putty)
4275.53
-
85.5
... More
Providing cutting bending MS bar Reinforcement in RCC Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
12846.13
-
56.53
... More
2 cm.(3|4") thick cement plaster in dedo or skirting in 1:2 consisting of part yf cement and 2 parts of apporved coarse sand laid in panels. Finished with 3mm.(1|8") floating, coat of neat cement or cement and marble dust in ratio 5:1 including supply of materials labour and T&P etc. required for proper completion of the work.
49.19
-
223.25
... More
Providing and fixing Glass pan equal or equivalent I.S.I marked quality putty . Drands and springs and including supply of all material and labour etc. complete.in window /ventilator (4.8 to 5.7 mm thick) (Saint Gobain, AIS, Modiguard)
71.13
-
517.75
... More
Supply & fixing glavanished Mosquitos proof,heavey quality iron wire gauge or expanded metal of heavey quality over windoes and i/c supply and fixing of C.P. teak wood/Ms flat battens 8 cm X 1 cm (3"X3/8") and i/c supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work.
71.13
-
726.75
... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter
72
-
268.47
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe 110mm
20
-
97.36
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110mm
20
-
100.71
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°
20
-
110.83
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete.
60
-
259.86
... More
Providing and fixing Oxidized door fittings
76.3
-
375.25
... More
Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km (5 miles) from the side of work and including watering , dressing etc. rate to including cost of all material, labour and T&P etc. required for proper completion of the work .(rate is including royality.)
6.4
-
1805
... More
First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.
2.32
-
5643
... More
Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
7.22
-
3966.25
... More
cement concrete flooring 1:2:4 (1 cement ;2 corse sand :4 graded stone aggregate of size 20 mm nominal size ) laid in one layer finished with floating cost of neat cement (40 mm thick floor)
87.97
-
318.25
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
909.51
-
28.5
... More
Providing and fixing Granite stone in water quash platform and 600 high in wall Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including rubbing
, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge
15.05
-
3715.56
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
165.08
-
859.75
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
10.31
-
859.75
... More
Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting (Johnson, Kajaria, Asian, Somany, NITCO)
78.81
-
1667.25
... More
First Floor (Hostel Building)
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Column
2.96
-
8165.25
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R. C. C. Lintel Beams
14.82
-
7343.5
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R. C. C. Loft & Chajja
12.04
-
7139.25
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Stair
1.57
-
7139.25
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Slab Beam
6.67
-
8165.25
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 F.F. R.C.C. Slab
55.76
-
7139.25
... More
40 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer’sspecifications. This includes cost of cement slurry, but excluding the
cost of nosing of steps etc. complete.
284.87
-
318.25
... More
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of one brick (230mm) thick .add for extra labour.
147.58
-
6046.75
... More
First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of half brick (4 1/2")(115mm) thick .add for extra labour.
34.42
-
6046.75
... More
Brick work with Class-150 class bricks instead of Class-75 informing to IS: 2222 -1991 in superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement : 4coarse sand) :115MM THICK WAL Half Brickwork For S. F. Parapet
15.33
-
6308
... More
6-10 mm ceiling plaster in 1:3 cement:sand mortar inluding all material labour T&P and safloding complete
595.95
-
166.25
... More
15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .
1377.1
-
171
... More
Mild Steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof worek, giltes etc. wrought to required form including drilling holes, rivetting or welding where necessary , and also including supply of steel, bolts , nuts etc. & their fixing required for prpper completion of the work.
508.64
-
99.32
... More
Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.
1456.88
-
89.4
... More
Supply and fixing of 32cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutter doors.
58.06
-
2256.25
... More
Two coats of enamel paint over one coat of primer to give an even shade
231.31
-
90.25
... More
2 cm.(3|4") thick cement plaster in dedo or skirting in 1:2 consisting of part yf cement and 2 parts of apporved coarse sand laid in panels. Finished with 3mm.(1|8") floating, coat of neat cement or cement and marble dust in ratio 5:1 including supply of materials labour and T&P etc. required for proper completion of the work.
64.41
-
223.25
... More
12 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .
860.74
-
123.5
... More
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete. (Birla, J.K. Putty)
2829.88
-
85.5
... More
Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside (Nerolac, Asian, Berger)
1968.58
-
66.5
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications;-Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqm (Nerolac, Asian, Berger)
860.74
-
134.82
... More
Providing and fixing 10 mm thick 300x300mm resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
35.58
-
859.75
... More
Providing and laying rectified Glazed Ceramic Wall tiles of size 300x450mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.(Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
64.55
-
1377.5
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and
slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of 300x300 mmsquare 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
701.68
-
973.75
... More
Providing cutting bending MS bar Reinforcement in RCC Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
7804.47
-
56.53
... More
20mm Bearing plaster in dedo or skirting 1:2 cement:sand mortar with neat finish including supply of materials labour and T&P etc. required for proper completion of the work.
42.65
-
223.25
... More
Providing and fixing Glass pan equal or equivalent I.S.I marked quality putty . Drands and springs and including supply of all material and labour etc. complete.in window /ventilator (4.8 to 5.7 mm thick) (Saint Gobain, AIS, Modiguard)
58.28
-
517.75
... More
Supply & fixing glavanished Mosquitos proof,heavey quality iron wire gauge or expanded metal of heavey quality over windoes and i/c supply and fixing of C.P. teak wood/Ms flat battens 8 cm X 1 cm (3"X3/8") and i/c supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work.
58.28
-
726.75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe 110mm
44.1
-
268.47
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110mm
14
-
100.71
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°
14
-
110.83
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete.
42
-
294.03
... More
Providing and fixing Oxidized door fittings
58.06
-
375.25
... More
Mild Steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof worek, giltes etc. wrought to required form including drilling holes, rivetting or welding where necessary , and also including supply of steel, bolts , nuts etc. & their fixing required for prpper completion of the work.
236.25
-
99.32
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners
47.58
-
519.32
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge
33
-
98.57
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
143.75
-
859.75
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
8.1
-
859.75
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
712.17
-
28.5
... More
Sanatory Work (Hostel Building)
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and floors wherever required : (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
9
-
4853.98
... More
Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 : 15 mm nominal bore ( ARK, Kohler ,L&k)
34
-
364.55
... More
Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
7
-
5827.87
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
15
-
2848.61
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (Neelkanth, Nirali)
2
-
5044.66
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore (ARK, Kohler ,L&k)
32
-
420.09
... More
Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. (Saint Gobain & Modiguard, HNG)
3
-
1184.79
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not
less than 170 gms
3
-
481.59
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
14
-
81.23
... More
Providing and fixing PTMT grating of approved quality and colour.150 mm nominal size square 100 mm diameter of the inner hinged round grating
8
-
142.48
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 15 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
90
-
255.36
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 20 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
30
-
313.46
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 25 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
120
-
412.41
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 32 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
48
-
608.83
... More
Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 20 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
6
-
242.68
... More
Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
6
-
343.77
... More
Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 32 mm nominal bore (ARK, Kohler ,L&k)
6
-
495.28
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Sintex or as approved by Engineer-in Charge)
5500
-
8.14
... More
Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge. 110mm Dia PVC SWR Pipe Type'A'
60
-
268.46
... More
Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge. 75mm Dia PVC SWR Pipe Type'A'
45
-
178.83
... More
Supply & fixing 100 dia inlet 75 mm (3”) outlet PVC Floor trap ( Supreme / Prince) first quality, ISI marked and supported with brick masonry seat as per site requirement with standard practice including cost and conveyance of all materials, taxes, labour charges etc, complete and as directed by the as direcyted by the Engineer-in-charge.
20
-
377.82
... More
Providing and fixing C.P. Health faucet (spray Nozzle) of approved quality for European water closet conforming to IS:8931 a) 15 mm nominal bore
1
-
377.82
... More
Construction of Septick tank 100 USER Size as per ISI sstandered 5.70x2.10x1.70
-
-
-
... More
Earth work in excavation in foundation/tank
51.51
-
161.5
... More
Base concrete in 1:4:8 cement:sand:stone ballast
2.12
-
3966.25
... More
Brick work in 1:4 cement:sand mortar in septick tank wall
11.82
-
5643
... More
Brick work in 115mm wall in 1:4cement:sand mortar baffle wall
7.56
-
6032.5
... More
R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam
1.66
-
6569.25
... More
Providing cutting beding MS bar Reinforcement in slab
156.12
-
56.53
... More
20mm plaster in 1:3 cement:sand mortar with neat cement finish
46.26
-
223.25
... More
P.c.c. in 1:2:4 cement:sand :stone grit in base to making slope
0.89
-
6227.25
... More
Providding and fixing C.I. man hole chembar 600x600mm size in slab
1
-
1274.28
... More
Providing and fixing C.I. vent pipe 100mm dia
1
-
1092.5
... More
Providing and fixing c.i. cowel guard 100mm dia
1
-
180.5
... More
Providind and fixing 150mm dia inlet and out let pipe
2
-
118.75
... More
Construction of Soak pit
-
-
-
... More
Earth work in excavation in foundation/tank
48.61
-
161.5
... More
Brick work in 1:3 cement:sand mortar in soak pit tank wall
1.54
-
5842.5
... More
Supply and filling of Brick bat bat in soak pit
12.58
-
617.5
... More
R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam
0.07
-
8165.25
... More
Providing cutting beding MS bar Reinforcement in slab
5.28
-
56.53
... More
Providind and fixing 150mm dia inlet and out let pipe
2
-
142.5
... More
Construction of man hole 45x45 cm size complete
-
-
-
... More
Earth work in excavation in foundation/tank
6.7
-
161.5
... More
Base concrete in 1:4:8 cement:sand:stone ballast
1.1
-
3966.25
... More
Brick work in 1:4 cement:sand mortar in septick tank wall
3.8
-
5643
... More
R.c.c. work in cover of man hole
0.4
-
8165.25
... More
Providing cutting bending MS bar reinforcement
33.2
-
56.53
... More
20mm plaster in 1:3 c:sand mortar with neat finish
23.25
-
223.25
... More
Appron drain 20x15 cm size complete
-
-
-
... More
Earth work in excavation in foundation/tank
5.55
-
161.5
... More
Base concrete in 1:4:8 cement:sand:stone ballast
1.85
-
3966.25
... More
Brick work in 1:4 cement:sand mortar in septick
1.96
-
5643
... More
20mm plaster in 1::2 cement:sand mortar with neat finish
37
-
223.25
... More
CONSTRUCTION OF TUBE WELL BORING AND INSTALLATION OF SUB.PUMP
-
-
-
... More
Tube well Boring 4.5" dia by heavey Rig machine
180
-
142.5
... More
Providing of 6 kg/cm2 Kisan make Casing pipe
60
-
247
... More
Providing and fixing of KSB make submersiable Three phase 7 stage 1/2 HP pump(m.R.)
1
-
14250
... More
Providing and fixing starter pannel board
1
-
3800
... More
Providing and fixing of of sub. Cable
50
-
52.25
... More
Providing and fixing of M.S.clamp
2
-
161.5
... More
Providing and fixing of G.I. Pipe 32 mm dia B class meadium
40
-
237.5
... More
Installation of pump labour/fixing
1
-
2850
... More
making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter
117.12
-
574.03
... More
Providing and fixing of G.I. Pipe 32 mm dia B class meadium
119.29
-
237.5
... More
Supply and laying of 80mm thick precast inter Lock concrete block manufacturing by Rubber Mouleded making each in size and shape (35No. Per sqm.) of minimum compressive strength 300kg/sqm over 40mm thick average stone dust with joints 3 mm thick with stone dust including labour and tempring & sweeping etc. complete to work. (Road)
60
-
760
... More
Providing and laying GSB below paver bricks road
7.2
-
361
... More
Laying and consolidation of WBM
7.2
-
1690.05
... More
Providing and mixing Stone dust for binding WBM20% of Stonen ballast
1.44
-
1249.92
... More
Electrical Work (Hostel Building)
-
-
-
... More
Wiring point for light with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.
171
-
579.5
... More
Wiring point for two way light with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall, and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.
3
-
751.45
... More
Wiring point for fan/fresh air fan with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall, and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.
72
-
637.45
... More
Wiring point for plug with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& socket on 3 mm thick phenolic laminated backelite sheet etc.complete in all respects, as directed including matching colour wash.
126
-
310.65
... More
Wiring point for Exhaust fan with 1.50 sq. mm FRLSH PVC insulated mulatistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, 15 Amp.piano type switch and ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc. complete in all respects including matching colour wash.
1
-
848.35
... More
Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.
6
-
163.4
... More
Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.
5
-
224.2
... More
S/W of submain with two number 2.50 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.
300
-
114.95
... More
S/W of submain with four number 2.50 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.
350
-
193.8
... More
S/W of submain with two number 4.00 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 2.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.
250
-
141.55
... More
S/W of submain with four number 10.00 sq. mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with two number 6.00 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.
150
-
479.75
... More
S/F of 100 Amp. Four pole Change over switch on 40 mm x 40 mm x 6 mm angle iron frame. Includingthe costof labour T & P, painting and other material required completion of the work as per direction and satisfaction of Engineer in charge.
1
-
8312.5
... More
Supply & laying of aluminium conductor PVC insulated armoured served sheated cables 1100 Volt grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps of suitable size or as directed by the Engineer-Incharge, complete in all respeted.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35.00 sq. mm x 3.50 core
30
-
400.9
... More
S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. comolete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 35.00 sq. mm x 3.50 core
3
-
169.1
... More
S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 25.00 sq.mm.
4
-
25.65
... More
S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 35.00 sq.mm.
12
-
29.45
... More
Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
24
-
85.5
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000 mm, outer pipe dia 50 mm , inner dia 25 mm , terminal dia 12 mm, outer G I pipe of 16 SWG and inner G I pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of rateining capacity along with 30 cm square C.I. frame with hinged cover and masonary housing (from electrode terminal to switch board cost of 25 x 3 mm G I strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified.
2
-
6127.5
... More
S/F of factory fabricated and wired metal clad dust and vermin proof mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches for ammeter and voltmeter, fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS 8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with detachable side covers and shall be complete with suitable cable end boxes, reverse entrey boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-charge. All outgoing switches of 100 Amp. And above will be provided with Amp. Metre, current transformers and selector switches etc. and insutrment fuses. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm / 2 mm cubicle type switch board shall be of cat. A , B & B-II and pedstal type for cat. C only. Incoming TPN 125 Amp.-1 No. Cat B, Outgoing TPN 32 Amp. - 3 No., S/F of 6 - 32 Amp. SP MCB (10KA) C Curve , CAT-A
1
-
100652.5
... More
S/F of 6 - 32 Amp. SP MCB (10KA) C Curve , CAT-A
102
-
247
... More
S/F of 40 Amp. DP MCB (10KA) C Curve , CAT-A
6
-
1121
... More
S/F of 63 Amp. 4 Pole MCB (10KA) C Curve , CAT - A
3
-
2175.5
... More
S/F surface/ flush mounting 8 ways SPN distribution board without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A
3
-
1805
... More
S/F surface/ flush mounting 12 ways SPN distribution board without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A
3
-
2137.5
... More
S/F Surface / flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A
3
-
4151.5
... More
Supply and fixing danger board fabricated from 10 gauge. M.S. Sheet as per I.E. Rules.
10
-
80.75
... More
S/F of 16 SWG M.S. durm with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .
10
-
1121
... More
S/F of crimping, solderless, copper tin electroplated lugs of Dowells / Ismail make suitable for 1.50 sq. mm To 10.00 sq.mm cables, including tapping with insulating tape, complete in all respect.
400
-
14.25
... More
S/F of shock treatment chart duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.
1
-
289.75
... More
S/L of 1800 mm x 900 mm x 12 mm thick chequred rubber matting of tested quality.
1
-
2422.5
... More
S/F of power plug with 15 Amp. / 250V flush type switch and 5 pin 15 Amp./ 250 V flush type universal socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
41
-
323
... More
S/F of Hexagonal fan box with hexagonal / Round G P fan box of approved make made up of 1.00 mm thick ISI marked G P sheet spot welded four to eight holes for pipe entry of 25.40 mm on upper and lower sides of the box . Holes should be semi shuttered type with 0.50 mm G. P. sheet made upper and lower cover duly screwed fitted with 300 mm round zinc coated M. S. Bar x 12 mm and brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreating along with supply of all material, labour, T&P etc. required for proper completion of the work.
63
-
142.5
... More
S/F of electronic fan regulator 120 - 280 V. ISI marked, on the existing switch board including making connections, required material, labour T/P etc.for proper completion of work to the satisfaction of Engineer in charge of work.
63
-
253.5
... More
S/F of Recess / Surface / Pendent mounting round 15 to 18 watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. CAT - AA.
15
-
1529.5
... More
S/F of LED Tube Light Batten Fitting suitable for up to 1 x 22 Watt LED tube light on surface complete in all respects. CAT - AA.
75
-
541.5
... More
S/F of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 45 Watt to 50 Watt. confirming to IP 66 protection complete in all respects. CAT - AA.
11
-
2631.5
... More
S/F of Ceiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked complete. etc. Usha / Crompton Greaves / Bajaj / Khaitan make.
63
-
1548.5
... More
S/F of Exhaust fan (Not fresh air fan) 300 mm sweep, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.
9
-
2375
... More
S/F of Exhaust fan 450 mm sweep ISI Marked heavy duty, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj/ panasonic make.
1
-
4275
... More
S/F of Bakelite fan box sheet on existing fan box complete in all respects.
63
-
35.15
... More
S/F of 100 Amp / 415 Volt Rewireable Type (kit-kat) Fuse unit- 3 No. & 1 No. Neutral link on wooden board with the help of ragbolt / hold fastner complete in all raspects.
3
-
1425
... More
S/F of LED Bulb 12 - 15 watt. Bajaj / Crompton / Philips make.
73
-
237.5
... More
S/F of water tight oblong bulkhead fitting of approved make complete with prismatic glass holder rubber gasket, G.I. Guard etc.
29
-
370.5
... More
S/F of 35.00 sq. mm x 4 core umarmoured cable ISI marked for connection with G.I. support wire complete in all respects.
50
-
261.25
... More
Fire Extinguisher work
-
-
-
... More
S/F of fire extinguisher, ABC type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all mateials and labour for proper completion of work.
8
-
8645
... More
S/F of fire bucket, round bottom made of G.I.sheet 9 - 11 litres capacity duly painted as per fire brigade design, supported on hanging chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
2
-
465.5
... More
ACADEMIC BUILDING
-
-
-
... More
Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation (Drain/Edging).
347.19
-
137.75
... More
Supply and filling of sand also including supply of all materials, labour and T&P etc. required for proper completion of the work.
92.16
-
1805
... More
Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
43.2
-
3966.25
... More
First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in foundation upto plinth supply of all materials, labour and T&P etc. required for proper completion of the work including providing scaffolding rope, chahlies fixing and removal. in foundation.
168.04
-
5510
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in Plinth bend excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for G_Plinth Bend
13.18
-
6797.25
... More
Supply and filling of Earth in plinth also including supply of all materials, labour and T&P etc. required for proper completion of the work.
192.93
-
783.28
... More
Supply and filling of sand also including supply of all materials, labour and T&P etc. required for proper completion of the work.
103.35
-
1805
... More
Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
82.68
-
3966.25
... More
First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.
224.19
-
6046.75
... More
First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure work.
9.91
-
6308
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work.Column
1.56
-
8165.25
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. Lintel & Sunshed
12.88
-
7139.25
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. RCC for Beam
7.22
-
8165.25
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work.R.C.C. Slab
97.11
-
7139.25
... More
First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.
18.47
-
6046.75
... More
Providing and laying damp proof course 4.0cm thick with cement concrete 1:2:4 (1Cement: 2 Coarse sand : 4graded gtone aggregate 10mm nominal size) and curing complete. 2. Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.70 kg/sqm approx including cost of fuel if any.
2.04
-
266
... More
Providing & laying “Brick bat Coba” 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmx30cm and side wall parapet shall be monotypic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & including supply of all materials labour T&P etc. required for proper completion of work and as per direction of E.I.C.
757.45
-
973.75
... More
Supply of M.S. angle iron door, windows, ventilator frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and reciting where necessary and also including supply of all materials, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer in charge for proper completion of work at site of work.
1299.17
-
84.46
... More
Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.
2427
-
89.4
... More
10mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(5mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:3 cement & fine sand of 1.25F.M. mortar. (Ceiling plaster)
801.73
-
166.25
... More
15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. inside
1580.34
-
156.75
... More
12mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. in outside
880.19
-
123.5
... More
20mm thick plaster 1:2 consisting of one cement& two coarse sand liad in panels . Finished with 3mm Floating coat of neat cement including supply of materials labour and T&petc.
72.58
-
223.25
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
290.71
-
859.75
... More
Supply and fixing 5mm thick China white Glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work . (Size of tiles upto 200X300 mm) in flooring (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
27.49
-
1377.5
... More
Supply and fixing 5mm thick China white Glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work . (Size of tiles upto 200X300 mm) in wall(Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
85.16
-
859.75
... More
Providing and fixing Granite stone gang cut Mirror polished ove vanity counter and platform
3.32
-
3715.5
... More
Providing edge Moulding to 18mm thick Marbal stone counters Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge.
5.54
-
351.66
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
34.38
-
859.75
... More
Supply and fixing of 35cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutters.
76.13
-
2275.25
... More
S/Fixing of aluminium door frame/Shutter glazed as per specification.
2.1
-
5385.55
... More
Providing and Fixing Oxidized door fittings
76.13
-
375.25
... More
Fixing Panes of glass with equal or equivalent ISI marked quality putty Brads and springs and including supply of all materials and labour ete complete. (3.80 to 4.7mm thick)(Saint Gobain, AIS, Modiguard)
97.08
-
456
... More
Providing and laying white cement putty of avg. thickness 1mm of approved brand and manufacture over plaster wall (Birla, J.K. Putty)
3262.26
-
103.99
... More
Weather coat two coat coats------- Finishing walls with Acrylic Smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (Nerolac, Asian, Berger)
880.19
-
140.09
... More
One Priming coat and two coat Oil bound distemper on new work including supply of all materials, labours and T&P etc. required for proper completion of the work (S.I.No. 649.+650)(Nerolac, Asian, Berger)
2382.07
-
66.5
... More
Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint or clear synthetic varnish including Supply of all materials labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no.103 1950 (In two coat.) wood work.(Nerolac, Asian, Berger)
281.77
-
90.25
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.110 mm diameter
90
-
268.46
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.shoe 110mm
20
-
97.35
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.coupler 110mm
20
-
100.71
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5 degree
20
-
110.83
... More
P/F S.S. railing in ramps
7.5
-
2850
... More
Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)
399.54
-
1667.25
... More
Providing and injecting chemical for peri constructional Anti-termite and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling jun ction of wall and floor. Along the external per meter of binding expansion joints currounding of pipes and conduit etc. complete. (plinth area of the building at 6313 (part 2013) IMIDACLOPRID SC 30.5 concenterate or any othe approved material sush as Hepthachlor of Chlordane wall be used. The rate of application of chemical em'ulsion shall be as follows :- treatment of top surface of plinth filling 5 liters per sqm.
658.88
-
185.25
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (SAIL, Tata Steel ltd, Jindal Steel & Power ltd and Jindal Saw ltd.)
11265.54
-
56.53
... More
E/W in filling including in ordinary soil , by cartage in embankment to be in 20 cm (8") layers including ramming & dressing the surface to required levels and slopes etc. complete work (253)
16.51
-
123.5
... More
Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation (Drain/Edging).
6.86
-
137.75
... More
First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal.
4.71
-
5643
... More
Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.
5.09
-
3966.25
... More
Supply and filling of Sand also including supply of all materials, labour and T&P etc. required for proper completion of the work.
6.11
-
1805
... More
25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including Supply of all materials labour and T&P etc. required for proper completion of the work.
98.39
-
207.58
... More
First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.
4.18
-
6046.75
... More
Providing and fixing Chequrred floor tile 300x300mm size in Ramp
13.5
-
247
... More
Providing and fixing Green Boarrd 8'x4' size
7
-
4750
... More
Extra Work in Lab (ACADEMIC BUILDING)
-
-
-
... More
First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure work.
3.42
-
6308
... More
R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. R.C.C. Plate form in lab
3.81
-
7139.25
... More
15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. inside
28.08
-
156.75
... More
Providing and laying white cement putty of avg. thickness 1mm of approved brand and manufacture over plaster wall (Birla, J.K. Putty)
28.08
-
82.98
... More
Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
25.92
-
859.75
... More
Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make,
including IInd class teak wood lipping of 25 mm wide x 12 mm thick
with necessary screws and bright finished stainless steel piano hinges,
complete as per direction of Engineer-in-Charge.With decorative veneering on one side and commercial
veneering on other side
26.91
-
1400.69
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm
60
-
23.72
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
60
-
37.66
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good
the wall wherever required : size Sink 450X200mm (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
6
-
3587.54
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
6
-
600.35
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.75 mm diameter
10
-
178.84
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes
15
-
343.02
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.115 mm nominal dia Pipes
15
-
214.85
... More
Sanitary work (ACADEMIC BUILDING)
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
6
-
4853.98
... More
Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 :15 mm nominal bore (Make :-L&k, ARK, Kohler)
10
-
364.55
... More
Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Parryware, Hindware, Jaguar, Cera, Johnson pedder)
1
-
5732.37
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
6
-
2293.31
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board Size 450X300X150 mm
6
-
5044.66
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15 mm Nominal bore(Make :-L&k, ARK, Kohler)
16
-
420.09
... More
Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. (Saint Gobain & Modiguard, HNG)
2
-
1184.79
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms
2
-
481.59
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
2
-
81.23
... More
Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of the inner hinged round grating
6
-
142.48
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
45
-
255.36
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall 20 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
60
-
313.46
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall .25 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
60
-
412.41
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall . 32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
30
-
473.19
... More
Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 25 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)
3
-
242.68
... More
Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) :32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)
3
-
343.77
... More
Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) :32 mm nominal bore (ARK, Kohler ,L&k)
3
-
495.28
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Sintex or as approved by Engineer-in Charge)
3000
-
8.14
... More
Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge.110mm Dia PVC SWR Pipe Type'A'
20.77
-
268.46
... More
Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge.75mm Dia PVC SWR Pipe Type'A'
15.18
-
178.83
... More
RAIN WATER COLLECTION FILTER TANK & BORING Size 3.00x3.00x3.00 (ACADEMIC BUILDING)
-
-
-
... More
Earth work in exavation in tank
48
-
137.75
... More
Lean concrete in 1:4:8 in base
2.4
-
3966.25
... More
Brick work in drain in 1:4 cement :sand mortar
10.15
-
6308
... More
Pcc in 1:2:4 top layer over wall
0.81
-
6312.75
... More
20mm plaster in 1:3 cement sand morter with neat cement finish
42.18
-
223.25
... More
Rcc in 1:1.5:3
1.44
-
7139.25
... More
Providing cutting bending MS bar rainforcement (1%)
162.78
-
56.53
... More
Providing and filling stone grit
3
-
1472.5
... More
Providing and filling coarse sand
3
-
1805
... More
Tube well boring 150mm dia by rig machine
100
-
142.5
... More
Providing and fixing PVC Casing pipe
60
-
285
... More
Providing and fixing Filer jali
5
-
118.75
... More
RAIN WATER HARESTING CHAMBER 45X45 Cm size (ACADEMIC BUILDING)
-
-
-
... More
Earth work in exavation in tank
11.92
-
137.75
... More
Lean concrete in 1:4:8 in base
1.44
-
3966.25
... More
Brick work in drain in 1:4 cement :sand mortar
7.04
-
6308
... More
Pcc in 1:2:4 top layer over wall
1.04
-
6312.75
... More
20mm plaster in 1:3 cement sand morter with neat cement finish
36.48
-
223.25
... More
Rcc in 1:1.5:3
0.49
-
7139.25
... More
Providing cutting bending MS bar rainforcement
44.5
-
56.53
... More
Providing and laying NP2 Pipe in Rain water pipe line 150mm dia
196.99
-
414
... More
making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter
46.27
-
574.03
... More
Providing and fixing of G.I. Pipe 32 mm dia B class meadium
40.43
-
237.5
... More
Septic Tank (50 user) (ACADEMIC BUILDING)
-
-
-
... More
earthwork exavation
19.89
-
137.75
... More
sand Filling in foundation
1.17
-
1805
... More
pcc 1:4:8 cement sand nominal size40mm
1.17
-
3966.25
... More
Brickwork 1:4 cement & sand
5.8
-
6308
... More
20 mm plaster 1:3 cement sand mortar 597
32.22
-
223.25
... More
Rcc 1:1.5:3 cement sand morter 20 mm nominal size(284)
1.13
-
7139.25
... More
40 mm pcc 1:2 cement sand 20 mm nominal size(665)
6.48
-
318.25
... More
steel bar 1% Of slab (504)
88.39
-
56.53
... More
Providing and fixing C.I. man hole chamber 600x600mm size in slab (19.18.1)
1
-
1274.28
... More
Providing and fixing C.I. vent pipe 100mm dia
1
-
1092.5
... More
Providing and fixing c.i. cowel guard 100mm dia
1
-
180.5
... More
Providind and fixing 150mm dia inlet and out let pipe
2
-
118.75
... More
Soke Pit (ACADEMIC BUILDING)
-
-
-
... More
Earth work in excavation in foundation/tank
48.61
-
161.5
... More
Brick work in 1:3 cement:sand mortar in soak pit
1.54
-
5842.5
... More
Supply and filling of Brick bat bat in soak pit
13.8
-
617.5
... More
R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam
0.07
-
8165.25
... More
Providing cutting beding MS bar Reinforcement in slab @2%
10.6
-
56.53
... More
Providind and fixing 150mm dia inlet and out let pipe
2
-
142.5
... More
Main Hole 600x600 (ACADEMIC BUILDING)
-
-
-
... More
earthwork exavation()
3.75
-
137.75
... More
pcc 1:4:8 cement sand nominal size40mm
0.6
-
3966.25
... More
Brickwork 1:4 cement & sand
0.86
-
6046.75
... More
20 mm plaster 1:3 cement sand mortar
6
-
223.25
... More
40 mm plaster 1:2:4 cement sand mortar
2.1
-
318.25
... More
Rcc 1:1.5:3 cement sand morter 20 mm nominal size
0.36
-
7139.25
... More
cutting & binding of for steel
21
-
56.53
... More
15 mm plaster 1:6 cement sand mortar
1.8
-
156.75
... More
Drain 0.30x0.30 M in Size (ACADEMIC BUILDING)
-
-
-
... More
Earth Work in foundaion in ordinary-soil(lome clay or sand) including lift upto 1.50 m and lead upto 30.0 m & inclding flling. Watering and Ramming of excavated earth in to the space between the building and the sides of foundationtrenches or in to the plinth and removel and disposal of surplas earth as directed by the Engineer - incharges upto a distance of 30 m (100 fts.)from the foundation trenches.
4.2
-
137.75
... More
stone dust filling in foundation including supply of necessary quanity of sand, watering and dressing etc. rate to including cost of material, labour and T&P etc. required for poper completion of the work .(all work)
1.4
-
1249.92
... More
Providing and laying Cement and Concrete1:4:8 ( 1 Cement: 4 Fine sand : 8 Graded Brick aggreate 40 mm nominal size ) including supply of materials. Labour and T & P etc. required of proper completion of the work and curing complete , also including cast of formwork in foundation & floors.
1.4
-
3966.25
... More
First class brick work in 1: 4 cement & fine sand of 1.25 F M mortar in foundation including supply of all material. Labour and T & P etc.
1.93
-
5643
... More
20 mm Thick plaster with cement morter in Proportion of 1:2 cement & fine sand (597)
28
-
223.25
... More
Electrical Work (ACADEMIC BUILDING)
-
-
-
... More
Wiring point for light with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.
108
-
579.5
... More
Wiring point for fan/fresh air fan with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.
46
-
637.45
... More
Wiring point for plug with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& socket on 3 mm thick phenolic laminated backelite sheet etc.complete in all respects, as directed including matching colour wash.
30
-
310.65
... More
Wiring point for Exhaust fan with 1.50 sq. mm FRLSH PVC insulated mulatistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, 15 Amp.piano type switch and ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc. complete in all respects including matching colour wash.
4
-
848.35
... More
Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.
6
-
224.2
... More
S/W of submain with two number 4.00 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 2.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.
375
-
141.55
... More
S/F of 32 Amp. Four pole Change over switch on 25 mm x 25 mm x 3 mm angle iron frame , including the cost of labour, T&P,painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.
1
-
4522
... More
Supply & laying of aluminium conductor PVC insulated armoured served sheated cables 1100 Volt grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M S clamps of suitable size or as directed by the Engineer-Incharge, complete in all respeted.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm x 4 core
125
-
325.85
... More
S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. comolete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm x 4 core
4
-
169.1
... More
S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 16.00 sq.mm.
24
-
25.65
... More
Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
30
-
85.5
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length 2000 mm, Length up to 2000 mm, outer pipe dia 50 mm , inner dia 25 mm , terminal dia 12 mm, outer G I pipe of 16 SWG and inner G I pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of rateining capacity along with 30 cm square C.I. frame with hinged cover and masonary housing (from electrode terminal to switch board cost of 25 x 3 mm G I strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified.
4
-
6127.5
... More
S/F of 6 - 32 Amp. SP MCB (10KA) C Curve , CAT-A
48
-
247
... More
S/F of 32 Amp. DP MCB (10KA) C Curve , CAT-A
3
-
703
... More
S/F of 40 Amp. FP MCB (10KA) C Curve , CAT-A
1
-
2161.25
... More
S/F Surface/ flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A
3
-
2137.5
... More
S/F Surface / flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A
1
-
4151.5
... More
Supply and fixing danger board fabricated from 10 gauge. M.S. Sheet as per I.E. Rules.
4
-
80.75
... More
S/F of 16 SWG M.S. durm with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .
9
-
1121
... More
S/F of crimping, solderless, copper tin electroplated lugs of Dowells / Ismail make suitable for 1.5 sq. mm. To 6 sq.mm cables, including tapping with insulating tape, complete in all respect.
70
-
14.25
... More
S/F of Power plug with 15 Amp./ 250 V flush type switch and 5 pin 15A / 250 V flush type universal socket in suitable M S box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
11
-
323
... More
S/F of Hexagonal fan box with hexagonal / Round G P fan box of approved make made up of 1.00 mm thick ISI marked G P sheet spot welded four to eight holes for pipe entry of 25.40 mm on upper and lower sides of the box . Holes should be semi shuttered type with 0.50 mm G. P. sheet made upper and lower cover duly screwed fitted with 300 mm round zinc coated M. S. Bar x 12 mm and brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreating along with supply of all material, labour, T&P etc. required for proper completion of the work.
41
-
142.5
... More
S/F of electronic fan regulator 120 - 280 V. ISI marked, on the existing switch board including making connections, required material, labour T/P etc.for proper completion of work to the satisfaction of Engineer in charge of work.
41
-
253.65
... More
S/F of Recess / Surface / Pendent mounting round 15 to 18 watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. CAT - AAA
9
-
1529.5
... More
S/F of LED Tube light with batten suitable for up to 1 x 22 watt LED tube light including tube on surface complete in all respects. Cat. AAA
81
-
541.5
... More
S/F of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt, confirming to IP 66 protection complete in all respects. CAT - AAA
6
-
2631.5
... More
S/F of Ceiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked complete. etc. Usha / Crompton Greaves / Bajaj / Khaitan make.
41
-
1548.5
... More
S/F of Exhaust fan (Not fresh air fan) 300 mm sweep, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.
5
-
2375
... More
S/F of Exhaust fan 450 mm sweep, Double ball bearing ISI Marked complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.
4
-
3325
... More
S/F of Bakelite fan box sheet on existing fan box complete in all respects.
41
-
35
... More
S/F of 32mp / 415 Volt Rewireable Type (kit-kat) Fuse unit- 3 No. & 1 No. Neutral link on T.W. wooden board with the help of ragbolt / hold fastner complete in all raspects.
1
-
950
... More
S/F of LED Bulb 12 - 15 watt. Bajaj / Crompton / Philips make.
26
-
237.5
... More
S/L of G.I. Pipe 50 mm B class for laying of cable in road or on wall with the help of M S 'C' clamp and rag bolt or hold fastner.
12
-
427.5
... More
Supply and fixing of 3 phase, 100amp , Aluminium Bus bar chamber of approved make complete including required labour , material and T & P For proper completion of work.
1
-
2850
... More
SITC OF 30 watt all in one integrated Solar street light without hybdid switch Bajaj / Havells make with 6.meter long G.I. Pipe , B class including painting , foundation,and erection with anticlimbing device, complete including required labour, T & P for proper completion of work.
4
-
51490
... More
Fire Extinguisher work at kasturba gandhi vidhaylay ( Acadmic building)
-
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion
of work.
6
-
8645
... More
Supply and fixing of C02 type fire extinguisher 4.5kg.
capacity (ISI Marked IS : 2878 & TAC approved)
complete with initial charge and wall bracket along with supply of all materials and labour for proper completion of work.
4
-
11381
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements