UP State Construction And Infrastructure Development Corporation Limited Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search &amp; bid for etender UP.

UP State Construction And Infrastructure Development Corporation Limited - UPSCIDC Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date2 Feb 2024
Closing Date16 Feb 2024
Tender Amount₹ 2,95,07,759 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

434.97

-

180.06

... More
Earth filling in under Floor By Avilable Earth including watering, Ramming Comlete of work

434.97

-

135.58

... More
Supplying and Filling in Plinth with sand under Floor including Watering, ramming, consoldating and dressing complete.

56.13

-

1469.05

... More
Providig and laying cement concrete 1:4:8 (1cement:4 C.sand: 8 Stone Ballast 40mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation and floors.

75.71

-

4712.03

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete in Foundation

195

-

6257.17

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Super Structure In Column G.F.

27.85

-

7507.25

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Super Structure In Column F.F.

21.46

-

7507.25

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Super Structure In Column S.F.

15.91

-

7507.25

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Super Structure In Column T.F.

1.48

-

7507.25

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Lintel G.F.

12.41

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Lintel F.F.

11.89

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Lintel S.F.

7.93

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Lintel T.F.

0.74

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size Beam G.F.

26.72

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size Beam F.F.

26.72

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size Beam S.F.

23.5

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size Beam T.F.

1.53

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Slab G.F.

52.72

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Slab F.F.

52.72

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Slab S.F.

34.92

-

7958.63

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all Work above plinth up to Floor V level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm. niminal size in Slab T.F.

2.15

-

7958.63

... More
Providing and injecting chemical emulsoin for preconstructional antitermite treatment and crsating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc, complete (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981)) Aldrine emusifiable concentrate or any other approved material such as Hepthachlor or chloradane will be used. The rate of application will be used. The rate of application of chemical emulsion shal be as follows:- (1) Treatment for masonary & foundation 5 Liters per SQM. (2). Back fill in intermediate contact with foundation 7.5 Litres per Sq.M. (3) Treatment of top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along external perimeter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under apron along external perimeter 5 Litres per Sq.M. as per plinth aria.

433.91

-

218.5

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Foundation including supply of all materials, labour and T & P etc. required for proper completion of work.

18.66

-

4933.55

... More
25mm. Thick D.P.C. 1:1.5:3 cement: c.sand: 13mm. Stone gritt including water Proofing Materials including Supply of all Material, Labour, T.&P. complete of work.up to 30.06.14

43.02

-

284.19

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. G.F.

80.3

-

6298.81

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. F.F.

80.73

-

6298.81

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. S.F.

47.93

-

6298.81

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. T.F.

6.64

-

6298.81

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Foundation including supply of all materials, labour and T & P etc. required for proper completion of work.

11.07

-

5098.46

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. G.F.

25.13

-

6463.71

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. F.F.

18.5

-

6463.71

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. S.F.

21.58

-

6463.71

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. T.F.

12.04

-

6463.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc. G.F.

1401.69

-

237.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc. F.F.

1279.39

-

237.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc. S.F.

1221.12

-

237.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc. T.F.

255.06

-

237.71

... More
6mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including supply of all Material, Labour T.&.P. complete of work G.F.

408

-

207.83

... More
6mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including supply of all Material, Labour T.&.P. complete of work F.F.

402.76

-

207.83

... More
6mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including supply of all Material, Labour T.&.P. complete of work S.F.

325.57

-

207.83

... More
6mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including supply of all Material, Labour T.&.P. complete of work T.F.

16.47

-

207.83

... More
Providing & Laying Polished Vitrified tiles in Dado different sizes (thickness to be specified by the manufacturer) with water absorption's less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:4 (1cement : 4 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.Size 600*600 mm.

1091.04

-

1074.56

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.

350.06

-

877.07

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.

67.59

-

995.67

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm

122

-

3744.65

... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

163.93

-

353.44

... More
Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : D/L Door

3.83

-

7849.85

... More
Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : Sliding Door

1.89

-

6879.9

... More
Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : Window

3.96

-

6574

... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

2.1

-

4015.01

... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

11.48

-

7913.05

... More
Providing & Fixing of M.S. Tubler frame for Door, Window Ventilaters and copboard with rectungler / L-Type section made and MS sheet joints mitred welded and grinded finish with profiles of required size including fixing of necessary but hinges and screws and applying priming coat of approved steel primer fixing with 15x3 mm lugs 10cm long embedded in cement concrete block 15x10x10cm of cc 1:3:6 (1cement : 3 coarse sand : 6 graded stone sggregate 20mm. nominal size)

3630.3

-

135.02

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

4673.57

-

98.02

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

106.86

-

849.44

... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

106.86

-

736.44

... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment(B) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (C)After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

435.39

-

1165.28

... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

71.28

-

532.35

... More
Providing & Applying Two Coat White Cement Based Wall care Putty For Given Smooth surface for Painting complete of work.

5310.06

-

107.94

... More
Finishing walls with 2 Coat Premium Acrylic Smooth exterior paint with Silicone additives of required shade

1374.97

-

118.35

... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.

3935.09

-

128.42

... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

63455.28

-

74.6

... More
40mm. Thick Apren Flooring 1:2:4 Cement:C.sand:20 mm. Stone grit with Floting coat of neat cement including supply of all Materials Labour and T & P etc. Complete of Work

64.6

-

424.86

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners etc.). For Stair case & Ramp

51.5

-

4760.45

... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter

32.75

-

679.25

... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm Shoe

18

-

327.75

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

9

-

206.31

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

528.53

-

156.5

... More
Providing & Fixing of ISI Marked Flush Door Shutters non Decoretive Type 30mm. Thick

136.61

-

1502.49

... More
Providing & Fixing of S.S. Door Bolt with Nuts & Screw Complete 300*16mm.

6

-

712.5

... More
Providing & Fixing of S.S. Door Bolt with Nuts & Screw Complete 250*16mm.

53

-

617.5

... More
Providing & Fixing of S.S.Tower Bolt with Nuts & Screw Complete 200*10mm.

6

-

356.25

... More
Providing & Fixing of S.S.Tower Bolt with Nuts & Screw Complete 150*10mm.

53

-

308.75

... More
Providing & Fixing of S.S.. Handles with Nuts & Screw Complete 125mm.

112

-

93.43

... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper

33

-

50.05

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. Providing and fixing of Lamination of door shutter.

72.45

-

620.68

... More
20mm.thick 1:3 Cement: C.sand Mortor Bearing Plaster with Floting Coat of Neat Cement

60.24

-

406.18

... More
Supply & Filling of Cinder in Sunken Portition of Toilet

13.26

-

4560

... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters With ISI marked stainless steel butt hinges of required size Second class teak wood

22.68

-

3490.34

... More
Centering and shuttering including strtting, propping etc. and removel Foundations, footings etc

122.19

-

271.26

... More
Centering and shuttering including strtting, propping etc. and removel Columns, pillars, Abutments, posts and struts

737.87

-

664.95

... More
Centering and shuttering including strtting, propping etc. and removel Suspended Floor roofs, Landings, balconies and acces plateform with water proof pply 12mm.

1277.7

-

641.4

... More
Centering and shuttering including strtting, propping etc. and removel Lintels, beams, plinth beams with water proof pply 12mm

1091.59

-

509.39

... More
Sanitary & Water Supply

-

-

-

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

6

-

4681.18

... More
Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

13

-

4506.96

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

19

-

1832.27

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

19

-

1112.26

... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

1

-

4329.33

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x510 mm bowl depth 200 mm

18

-

3417.67

... More
Providing and fixing P.V. C. Pipe 6kg.Pis including all Material, Labour T.&P. Complete of work. 110 mm dia.

273

-

679.25

... More
Providing and fixing P.V. C. Bend including all Material, Labour T.&P. Complete of work. For 110 mm dia.

48

-

327.75

... More
Providing and fixing P.V. C. N Trape including all Material, Labour T.&P. Complete of work. 100*100mm.

58

-

527.25

... More
Providing and fixing of P.V.C. Copler For 110 mm dia.

72

-

185.25

... More
Providing and fixing of P.V.C. Tee For 110 mm dia.

24

-

403.75

... More
Providing and fixing of P.V.C. Door Bend For 110 mm dia.

12

-

327.75

... More
Providing and fixing of P.V.C. Clamp For 110 mm dia.

96

-

64.6

... More
Providing and fixing of P.V.C. Covel 90mm. Ddia

6

-

235.6

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 15 mm dia. nominal bore

48

-

344.34

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 20 mm dia. nominal bore

180

-

371.87

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 25 mm dia. nominal bore

140

-

433.88

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

16

-

430.53

... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore

38

-

58.8

... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm nominal bore

12

-

593.4

... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore

12

-

657.38

... More
Cutting holes upto 30x30 cm in walls including making good the same : With F.P.S. bricks.

20

-

288.31

... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.

20

-

312.66

... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore.

18

-

945.25

... More
Providing and fixing C.P. brass long body /shortbody bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. as Such Hindwair 15 mm nominal bore

24

-

926.25

... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. as Such Hindwair 15 mm nominal bore.

17

-

1377.5

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as Such Hindwair 15 mm nominal bore

38

-

617.5

... More
Providing and fixing of C.P. towel rod 24"heavy.

16

-

368.13

... More
Providing and fixing C.P. brass Shower of approved quality as Such Hindwair

17

-

916.75

... More
Providing and fixing C.P. brass healthfacet of approved quality as Such Hindwair

13

-

1092.5

... More
Providing and fixing C.P. brass Two way bibcock of approved quality as Such Hindwair

13

-

926.25

... More
Providing & Placing of polyethylene waterstorage tank, ISI 12701 locking arregment and making necessary holes for inlet, outlet and overflowpipes but without fittings.

5000

-

7.61

... More
Providing & Placing of polyethylene waterstorage tank, ISI 12701 locking arregment and making necessary holes for inlet, outlet and overflowpipes but without fittings. For Fire Fighting

10000

-

7.61

... More
Providing & Making of Platefom for 1000 Ltr. P.V.C. Water Storege Tank.

10

-

3325

... More
Providing & Making of Platefom for 2000 Ltr. P.V.C. Water Storege Tank.

2

-

4750

... More
Providing & Fixing of Disable Toilet Kit set complete such as make Hindwair or Eq.

1

-

118750

... More
External Sanitary & Water Supply

-

-

-

... More
Providing & Laying of 160mm. Dia P.V.C. pipe 6kgcm Sewer Line including excavation of Tranch Providing 1:4:8 cement Concrete P.C.C. Base & Pipe covered with P.C.C. 1:2:4 including all Labour, T.&P. complete of work

108

-

2353.15

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep

18

-

8284.95

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc32mm.dia

110

-

316.6

... More
100 user Saptic tank & Soke pit (300mter Dia)

-

-

-

... More
Earth Work excavation in ordaenory soil including 1.5 mtr Lift & 30.00mtr. Lead With all Labour. T&P. Complete of work

61.18

-

180.06

... More
PCC 1:4:8 Cement Corse sand stone ballast 40mm size Under Floor

1.67

-

4712.03

... More
Class m-150 Brick Work in 1:4 Cement:C: sand Mortor Including supply of all material, Labour T.P Complete of Work in Super Structer

12.94

-

5098.46

... More
RCC Work 1:1:3 ( Cement: 1 Coarse sand : 3 graded stone aggregate 20 mm nominal size) in Stair case. Mumty Slab & parapet Patta including Supply of all material, Labour T.P etc Complete of work

3.87

-

7958.63

... More
Centring & Shutring Work Saptic tank

11.97

-

641.4

... More
Centring & Shutring Work Soke pit

8.72

-

144.26

... More
M.S. Work in R.C.C Work

153.86

-

74.6

... More
20 mm. Thik 1:2 Cement:C. Sand mortor Plaster with Neat Cement Finish

55.19

-

406.18

... More
Filling of Brick Bats in sokpit

17.15

-

1487.21

... More
providing and laying in cemrmt concrete 1:2:4 (1 cement 4 coarse sand 4 graded stone aggregate 40 mm nominal size) and curing complete, inlcuding cost if form-work . In foundation and floors.

0.48

-

5449.75

... More
Site Development

-

-

-

... More
Levelling & Dressing of site after complition of work

875

-

7.6

... More
Construction of Drain 250 X 300 mm

-

-

-

... More
Earth work in exacavtion in trenches for foundatione land for pipes cables etc. in ordinary soil (loan clay or sand) including lift upto 1:5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c With in a lead of 50m.

35.8

-

180.06

... More
providing and laying in cemrmt concrete 1:2:4 (1 cement 4 coarse sand 4 graded stone aggregate 40 mm nominal size) and curing complete, inlcuding cost if form-work . In foundation and floors.

6.5

-

4712.03

... More
Class 150 brick work in 1:4 cement and Coarse sand of 2.20 fineness modulus mortar in foundation and plinth including supply of all material, labour and tools nd plants etc. required for proper completion of the work

10.5

-

5098.6

... More
Cement concrete flooring 1:2:4(1 Cement ;2 coarse sand : finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc complete

1.26

-

5449.75

... More
20 mm Cement plaster on singal or half brick wall finished with a floating coat of neat cement of mix : 1:3(1 cement; 3 Coarse sand)

106

-

406.18

... More
Electrical Work

-

-

-

... More
Wiring for light point/fan point /exhaust fan point /call bell point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required. Group A

296

-

702.1

... More
Wiring for twin control light point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way Modular switch, Modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

3

-

1080.47

... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

67

-

329.95

... More
Wiring for light / power plug with 2 x 4.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 4.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

1950

-

231.04

... More
Wiring for light / power plug with 2 x 6.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 6.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

540

-

303.67

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1010 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35.00 sq. mm

230

-

267.7

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1010 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35.00 sq. mm & Upto 95 sq.mm

80

-

280.15

... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required. Single pole

102

-

177.08

... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp.

4

-

715.24

... More
Earthing with G I earth pipe 4.5 mtr. Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.

3

-

4741.77

... More
Providing and fixing 25 mm x 5 mm G I strip on surface or in recess for connections etc. as required.

50

-

168.78

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but modular plate etc. as required.

54

-

273.92

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

17

-

1779.81

... More
Supplying and fixing following way surface / recess mounting, verticall type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required. 4 way (4 + 12), double door

1

-

5196.23

... More
Supplying and fixing following way surface / recess mounting, verticall type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required. 4 way (4 + 12), TPN Vertical Type MCB/ DB double door.

3

-

3661.99

... More
Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required.

54

-

234.49

... More
Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required.

16

-

68.48

... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.. as required. Upto 450 mm sweep.

38

-

311.28

... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

61

-

405.35

... More
S/F of 50 Amp. to 63 Amp. SPMCB (10 KA) Cat-B

26

-

370.5

... More
Supply and fixing of hexagonal / round G P fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.40 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50 mm G P sheet made upper and lower cover duly screwed fitted with 300 mm round zink coted M S bar x 12 mm and brand name should be embossed, fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work.

54

-

142.5

... More
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .

38

-

769.5

... More
Supply and fixing of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect With 3 years warranty.

76

-

969

... More
Supply and fixing of recess/Surface mounting round 12 watt to 15 watt Cut out Min 150mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24Hr Continuous Operation, complete in all respect With 3 years warranty.

20

-

978.5

... More
Supply and fixing of water tight oblong 10 watt LED bulkhead luminaire having die cast housing with driver set confirming to IP 65 and above protection. complete in all respect. 1100 system lumens, 1101m/watt, PF0.95, with 5 year warrantee Cat AAA

6

-

1330

... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 watt. Confirming to IP 66 protection complete in all rescept Cat-AAA

4

-

5519.5

... More
Supply and errection of factory fabricated and wired metal clad dust and vermin proof floor mounting M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four pole 36 KA with thermal magnatic release) switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA, P.F.,KW etc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above instulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per directuons of Engineer-in-Charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be cat A & B only. outdoor Type Feeder Piller Incoming- 200 Amp MCCB = 01 No. Outgoing- 63 Amp MCCB = 06 No.

1

-

157415

... More
Supply and fixing of crimping, solderless, copper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq.mm to 2.5 sq.mm cables, including tapping with insulating tape, complete in all respect.

250

-

14.25

... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

2

-

7467

... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

2

-

11381

... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.

2

-

465.5

... More
S&F of shock treatment chart (Prescribed under I.E Rule) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

1

-

289.75

... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.

1

-

2422.5

... More
Supply and fixing of single phase multifunctional electronic energy meter 10 to 60 Amp. capacity fitted in integral box on wall complete in all respect .

17

-

1613.1

... More
S/f of ceiling fan 1200 mm sweep. Single star rated Usha / Crompton/Bajaj mak

54

-

1757.5

... More
S/F of Wall Fan 16" Usha / Crompton/Bajaj make

2

-

2185

... More
S/F of 'Al' Lugs & Gland complete in all respect.

6

-

2850

... More
Supply & Fixing of Fan Sheet of Backelite

54

-

36.1

... More
S/F of LED Bulb 9 watt ISI

83

-

142.5

... More
Supply & Fixing of light duties exhaust fan (Not Fresh Air Fan) 12”dia ISI double ball bearing metalic Usha / Crompton/Bajaj/ Havells make

21

-

2090

... More
Supply & Fixing of heavy duties exhaust fan 12”dia ISI double ball bearing metalic Usha /Crompton/Bajaj/ Havells make

17

-

2470

... More
S/F of Kit-Kat fuse 200 Amp with neutrail link ,wooden ply board ,Hole fasner with connection

3

-

1187.5

... More
Supply & Fixing of exhaust fan luvers 12”dia

38

-

475

... More
Supply of Al. Armoured Cable 16 sq.mm x 4 core.

80

-

175.75

... More
Supply of Al. Armoured Cable 25 sq.mm x 3½ core.

150

-

225.15

... More
Supply of Al. Armoured Cable 70 sq.mm x 3½ core.

80

-

395.2

... More
Fire Alarm System

-

-

-

... More
Supplying, installation, testing & commissioning of manual call boxes of M.S. Construction in surface/ recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

3

-

327.88

... More
Supplying, installation, testing & commissioning of Fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

3

-

399.12

... More
Supplying, inatallation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuite fault, fire condition and all other standard facilities as per IS: 2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 6 Zone

1

-

8423.82

... More
Wiring for light / power plug with 2 x 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 1.50 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

170

-

161.17

... More
Fire Hydrant System

-

-

-

... More
Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 100 mm

96

-

1767.36

... More
Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 80 mm

18

-

1303.9

... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

3

-

6000.71

... More
Supplying and fixing single headed internal hydrant valve With instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia With cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal /Stainless Steel cap and chain as required Single headed Stainless steel

5

-

4246.5

... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required. Stainless Steel (Grade 304)

10

-

3076.79

... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304)

5

-

1149.65

... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304 sheet with 3 mm dia holes with stainless steel flange 100 mm dia

1

-

4609.65

... More
Supplying (Grade and 304) fixing With orifice plate Of made required out size of 6 to mm be fitted thick tO stainless between reduce flange & landing valve of external and internal hydrants pressure at the outlet to the level of 3.5 kg/cm2 complete as required

1

-

913.77

... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way - 150 mm dia M.S. Pipe

1

-

4663.61

... More
Providing, installation, testing and commissioning of non-returr valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 100 mm

6

-

7643.55

... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, pronze/gun metal seat, ISI marked complete with nuts bolts, washers, gaskets and conforming to 1S 780 of following sizes as required 100 mm

4

-

10127.54

... More
Supplying, fixing, testing and commissioning mmiecinning of of butterfly butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to 1S 13095 of following 80 mm

5

-

3446.17

... More
Supplying, fixing, testing and commissioning mmiecinning of of butterfly butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to 1S 13095 of following 100 mm

2

-

4611.73

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1010 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35.00 sq. mm

70

-

267.7

... More
S/F of Air Vessel made of 250 mm dia, 8 mm thick MS Sheet, 1200 mm in Height With air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories,pressure gauge and painting with synthetic enamel paint of approved shade as required.

1

-

12619.82

... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for pperation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F insulation, conforming to l$-325 (D) M.S. fabricated common base plate, coupling, coupling guard foundation bolts etc. as required (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

1

-

70458.35

... More
Supplying and fixing of Pressure Switch in M S pipe line including connection etc. as required.

1

-

1069.41

... More
Fire Alarm System

-

-

-

... More
S/F of 7 AH 12 Volt Battery.

2

-

1140

... More
Fire Hydrant System

-

-

-

... More
SITC of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted "FIRE" in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete.

6

-

5225

... More
Supply, Installation, Testing & Commissioning of Pressure Gauge.

1

-

902.5

... More
Supply of Al. Armoured Cable 16 sq.mm x 4 core.

70

-

175.75

... More
S&F of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

8

-

8645

... More
S&F of Co2 type Fire extinguisher, 4.5 Kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

8

-

11381

... More
SITC of Factory fabricated wired metal clad dust and vir,min proof floor mounting main electric control panel for terrace pump with starter switches selectors voltmeter etc.

1

-

22800

... More
S/F of 'Al' Lugs & Gland complete in all respect.

2

-

2850

... More
Construction of Principal Awas

-

-

-

... More
Cleaning of jungle including of rank vegetations grass bush wood trees and saplings of grith up to 30cm

300

-

12.17

... More
Layout of Building

119.31

-

5.7

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

88.01

-

180.06

... More
Earth Filling By Avilable Earth

88.01

-

135.58

... More
Earth work in filling under floor upto plinth including watering ramming by Cartage Earth

195.01

-

484.55

... More
Sand Filling Under Floor

16.03

-

1469.05

... More
Providig and laying cement concrete 1:4:8 (1cement:4 C.sand: 8 Stone Ballast 40mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation and floors.

19.91

-

4712.03

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-200 in Foundation

32.07

-

6257.17

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-200 in In Column G.F.

7.42

-

7507.25

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-200 in in Lintel G.F.

5.43

-

7958.63

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-200 in in Beam

6.21

-

7958.63

... More
R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:3 (1cement:1.5csand:3stone grit) excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including supply of all Material,labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-200 in in Slab

15.47

-

7958.63

... More
Providing and injecting chemical emulsoin for preconstructional antitermite treatment and crsating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc, complete (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981)) Aldrine emusifiable concentrate or any other approved material such as Hepthachlor or chloradane will be used. The rate of application will be used. The rate of application of chemical emulsion shal be as follows:- (1) Treatment for masonary & foundation 5 Liters per SQM. (2). Back fill in intermediate contact with foundation 7.5 Litres per Sq.M. (3) Treatment of top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along external perimeter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under apron along external perimeter 5 Litres per Sq.M.

107.03

-

218.5

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Foundation including supply of all materials, labour and T & P etc. required for proper completion of work.

2.91

-

4933.62

... More
25mm. Thick D.P.C. 1:1.5:3 cement: c.sand: 13mm. Stone gritt including water Proofing Materials including Supply of all Material, Labour, T.&P. complete of work.up to 30.06.14

9.75

-

284.19

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. G.F.

10.5

-

6298.81

... More
Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. F.F.

25.71

-

6298.81

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work.

9.9

-

6463.71

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work. F.F.

6.24

-

6463.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc

479.83

-

237.71

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc F.F.

91.36

-

237.71

... More
6mm. Thick Ceiling Plaster with 1:3 cement : C.sand Mortor including supply of all Material, Labour T.&.P. complete of work G.F.

116.73

-

207.83

... More
Providing & Laying Polished Vitrified tiles in Dado different sizes (thickness to be specified by the manufacturer) with water absorption's less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:4 (1cement : 4 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.

113.45

-

1074.56

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.

33.49

-

877.07

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.

7.98

-

995.67

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,\ epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

9.77

-

3744.65

... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. S/L Door

593.85

-

98.02

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

472.46

-

135.02

... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

21.57

-

353.44

... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sum. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.

121.89

-

1165.28

... More
Making Khurra 45*45 cm with everage minimum thickness of 5 cm cement concrete 1:2;4 (1 cement: 2coarse sand: 4 aggrgate 20mm. Nominal size over P.V.c. sheet 1*1*400Micron

4

-

206.31

... More
Providing & Applying Two Coat White Cement Based Wall care Putty For Given Smooth surface for Painting complete of work.

687.92

-

107.94

... More
Finishing walls with 2 Coat Weather coat exterior paint with Silicone additives of required shade

287.55

-

118.35

... More
Painting wall with oil bound Distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.

400.37

-

128.42

... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

2517.34

-

74.6

... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

4577.02

-

74.6

... More
40mm. Thick Apren Flooring 1:2:4 Cement:C.sand:20 mm. Stone grit with Floting coat of neat cement including supply of all Materials Labour and T & P etc. Complete of Work

47.05

-

424.86

... More
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter

7.5

-

679.25

... More
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm Shoe

4

-

327.75

... More
Providing & Fixing of inlet mouth of rain water pipe cost iron Greting 15 cm. diameter and weighting not less than 440gm.

2

-

37.84

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

93.85

-

156.5

... More
20mm.thick 1:3 Cement: C.sand Mortor Bearing Plaster with Floting Coat of Neat Cement

9.96

-

406.18

... More
S/Fixing of 4mm thick glass pans

14.54

-

736.44

... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

21.53

-

1502.49

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. Providing and fixing of Lamination of door shutter.

6.93

-

620.68

... More
Providing and fixing Stainless steel sliding door bolts ISI with nuts and screws etc. complete : 250x16 mm

26

-

617.5

... More
Providing and fixing Stainless steel Tower bolts ISI with nuts and screws etc. complete 200x10 mm

24

-

356.25

... More
Providing and fixing Stainless steel Tower bolts ISI with nuts and screws etc. complete 150x10 mm

4

-

308.75

... More
Providing and fixing Stainless steel Handels ISI with nuts and screws etc. complete : 125 mm

56

-

114

... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

12

-

50.05

... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete.

14.54

-

849.44

... More
With ISI marked stainless steel butt hinges of required size Second class teak wood

6.62

-

2774.4

... More
Centering and shuttering including strtting, propping etc. and removel Foundations, footings etc

46.04

-

271.26

... More
Centering and shuttering including strtting, propping etc. and removel Columns, pillars, Abutments, posts and struts

25.41

-

664.95

... More
Centering and shuttering including strtting, propping etc. and removel Suspended Floor roofs, Landings, balconies and acces plateform with water proof pply 12mm.

159.43

-

641.4

... More
Centering and shuttering including strtting, propping etc. and removel Lintels, beams, plinth beams with water proof pply 12mm

179.33

-

509.39

... More
Sanitary & Water Supply

-

-

-

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

1

-

4681.18

... More
Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

1

-

4506.96

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap.

2

-

1832.27

... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

2

-

1112.26

... More
Providing and fixing Stainless Steel A ISI 304 Utensel Wash kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,ncluding painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 510*1040mm bowl depth 200 mm

2

-

4952.05

... More
Providing and fixing P.V. C. Pipe 6kg.Pis including all Material, Labour T.&P. Complete of work. 110 mm dia.

20

-

679.25

... More
90mm. Dia

20

-

489.25

... More
Providing and fixing P.V. C. Clamp including all Material, Labour T.&P. Complete of work. For 110 mm dia.

6

-

33.25

... More
Providing and fixing P.V. C. Clamp including all Material, Labour T.&P. Complete of work. For 90mm. Dia

6

-

28.5

... More
Providing and fixing P.V. C. Bend including all Material, Labour T.&P. Complete of work. For 110 mm dia.

2

-

327.75

... More
Providing and fixing P.V. C. Bend including all Material, Labour T.&P. Complete of work. For 90mm. Dia

2

-

209

... More
Providing and fixing P.V. C. N Trape including all Material, Labour T.&P. Complete of work. 90*90mm.

7

-

527.25

... More
Providing and fixing of P.V.C. Copler For 110 mm dia.

4

-

185.25

... More
Providing and fixing of P.V.C. Copler For 90mm. Dia

4

-

118.75

... More
Providing and fixing of P.V.C. Covel 90mm. Ddia

2

-

235.6

... More
Providing and fixing of P.V.C. Tee For 110 mm dia.

2

-

403.75

... More
Providing and fixing of P.V.C. Tee For 90mm. Dia

2

-

294.5

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge 20 mm dia. nominal bore

6

-

371.87

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge 25 mm dia. nominal bore

24

-

433.88

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

2

-

430.53

... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore

7

-

58.8

... More
Providing and Fixing of G.I. Pipe in external work 25mm. dia

12

-

323.55

... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore

2

-

303.84

... More
Cutting holes upto 30x30 cm in walls including making good the same : With F.P.S. bricks.

6

-

288.31

... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.

12

-

312.66

... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore.

1

-

945.25

... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. as Such Hindwair 15 mm nominal bore

2

-

926.25

... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. as Such Hindwair 15 mm nominal bore.

1

-

1377.5

... More
Providing and fixing C.P. brass Short body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. as Such Hindwair 15 mm nominal bore

2

-

855

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as Such Hindwair 15 mm nominal bore

4

-

617.5

... More
Providing and fixing of C.P. towel rod 24"heavy.

2

-

368.13

... More
Providing and fixing C.P. brass Shower of approved quality as Such Hindwair

1

-

916.75

... More
Providing and fixing C.P. brass healthfacet of approved quality as Such Hindwair

1

-

1092.5

... More
Providing and fixing C.P. brass Two way bibcock of approved quality as Such Hindwair

1

-

926.25

... More
Providing & Placing of polyethylene waterstorage tank, ISI 12701 locking arregment and making necessary holes for inlet, outlet and overflowpipes but without fittings.

1000

-

7.61

... More
Providing & Making of Platefom for 1000 Ltr. P.V.C. Water Storege Tank.

1

-

3325

... More
External Sanitary & Water Supply

-

-

-

... More
Providing & Laying of 160mm. Dia P.V.C. pipe 6kgcm Sewer Line including excavation of Tranch Providing 1:4:8 cement Concrete P.C.C. Base & Pipe covered with P.C.C. 1:2:4 including all Labour, T.&P. complete of work

24

-

2353.1

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep

6

-

8284.5

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc32mm.dia

24

-

316.4

... More
Construction of 25 User Saptic Tank & Soke pit (1.50 mtr dia)

-

-

-

... More
Earth Work excavation in ordaenory soil including 1.5 mtr Lift & 30.00mtr. Lead With all Labour. T&P. Complete of work

16.36

-

180.06

... More
PCC 1:4:8 Cement Corse sand stone ballast 40mm size Under Floor

0.92

-

4712.03

... More
Class m-150 Brick Work in 1:4 Cement:C: sand Mortor Including supply of all material, Labour T.P Complete of Work in Super Structer

6.06

-

5098.2

... More
RCC Work 1:1:3 ( Cement: 1 Coarse sand : 3 graded stone aggregate 20 mm nominal size) in Stair case. Mumty Slab & parapet Patta including Supply of all material, Labour T.P etc Complete of work

1.12

-

7958.4

... More
Centring & Shutring Work Saptic tank

5.6

-

641.4

... More
Centring & Shutring Work Soke pit

12.64

-

144.2

... More
M.S. Work in R.C.C Work

107.85

-

74.6

... More
20 mm. Thik 1:2 Cement:C. Sand mortor Plaster with Neat Cement Finish

23.87

-

406.18

... More
Filling of Brick Bats in sokpit

3.91

-

1472

... More
providing and laying in cemrmt concrete 1:2:4 (1 cement 4 coarse sand 4 graded stone aggregate 40 mm nominal size) and curing complete, inlcuding cost if form-work . In foundation and floors.

0.22

-

5449.2

... More
Elecrical Work

-

-

-

... More
Wiring for light point/fan point /exhaust fan point /call bell point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required. Group A

29

-

702.1

... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

9

-

329.95

... More
Wiring for light / power plug with 2 x 4.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 4.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

175

-

231.04

... More
Wiring for light / power plug with 4 x 10.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 2 No. 6.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

35

-

695.18

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1010 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35.00 sq. mm

70

-

267.7

... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required. Single pole

17

-

177.08

... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp.

2

-

715.24

... More
Earthing with G I earth pipe 4.5 mtr. Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.

2

-

4741.77

... More
Providing and fixing 25 mm x 5 mm G I strip on surface or in recess for connections etc. as required.

30

-

168.78

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but modular plate etc. as required.

5

-

273.92

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

2

-

1779.81

... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp.

1

-

364.54

... More
Supplying and fixing following way surface / recess mounting, verticall type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required. 4 way (4 + 12), double door

1

-

5196.23

... More
Supplying and fixing following way surface / recess mounting, verticall type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as required. 4 way (4 + 12), TPN Vertical Type MCB/ DB double door.

3

-

3661.99

... More
Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required.

5

-

234.49

... More
Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required.

1

-

68.48

... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.. as required. Upto 450 mm sweep.

3

-

311.28

... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

7

-

405.35

... More
S/F of 50 Amp. to 63 Amp. SPMCB (10 KA) Cat-B

1

-

370.5

... More
S/F of 63 Amp. TPMCB (10 KA) Cat-B

1

-

1244.5

... More
Supply and fixing of hexagonal / round G P fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.40 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50 mm G P sheet made upper and lower cover duly screwed fitted with 300 mm round zink coted M S bar x 12 mm and brand name should be embossed, fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work.

5

-

142.5

... More
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .

3

-

769.5

... More
Supply and fixing of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect With 3 years warranty.

6

-

969

... More
Supply and fixing of recess/Surface mounting round 24 watt to 32 watt Cut out Min 150mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24Hr Continuous Operation, complete in all respect With 3 years warranty.

1

-

1947.5

... More
Supply and fixing of water tight oblong 10 watt LED bulkhead luminaire having die cast housing with driver set confirming to IP 65 and above protection. complete in all respect. 1100 system lumens, 1101m/watt, PF0.95, with 5 year warrantee Cat AAA

2

-

1330

... More
Supply & Fixing of single light wall bracket on matching M.D.F.E.G. Board base etc. complete in all respect. Cat.-AAA

2

-

1567.5

... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

2

-

7467

... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

2

-

11381

... More
S/f of ceiling fan 1200 mm sweep. Single star rated Usha / Crompton/Bajaj mak

5

-

1757.5

... More
Supply & Fixing of Fan Sheet of Backelite

5

-

36.1

... More
S/F of LED Bulb 9 watt ISI

12

-

142.5

... More
Supply & Fixing of light duties exhaust fan (Not Fresh Air Fan) 12”dia ISI double ball bearing metalic Usha / Crompton/Bajaj/ Havells make

3

-

2090

... More
Supply & Fixing of exhaust fan luvers 12”dia

3

-

475

... More
S/F of Kit-Kat fuse 100 Amp with neutrail link ,wooden ply board ,Hole fasner with connection

4

-

617.5

... More
Supply of Al. Armoured Cable 16 sq.mm x 4 core.

70

-

175.75

... More
Construction of Rain Water Harvesting 01 Unit

-

-

-

... More
Earth work in Excavation in trenches for foundations pipes cable etc in ordinary soil (Loam, clay or sand) including lift up to 1.50M and lead upto 50M and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i.c. within a lead of 30 m. up tp 1.50mtr.

83.48

-

180.06

... More
1.50 to 3.00 mtr.

53.66

-

180.06

... More
Providig and laying cement concrete 1:4:8 (1cement:4fine sand: 8 Stone Ballast 40mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation and floors.

8.34

-

4712.03

... More
R.C.C. works with cement approved coarse sand and 20mm gauge approved stone grit in the proportion 1:2:4 (1cement:6aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending& binding. but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labours, tools and plants etc required for proper completion of the works. Binding wire cost being included in the item

5.39

-

7958.63

... More
Centring & Shutring Slab

40.5

-

641.4

... More
Edges of Slab

31.14

-

144.26

... More
Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including supply of all materials, labour and T & P etc. required for proper completion of work.

33.65

-

5098.46

... More
15mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc.

127.2

-

273.47

... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

423.12

-

74.67

... More
Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) as per standard design :

6

-

376.78

... More
Providing & Fixing of Posititon Precast RCC Manhole cover and frame of Required shape and approved quailty

2

-

994.46

... More
Excavating trenches of required width for pipes, cables, etc includingexcavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returningthe soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. anddisposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm

110

-

380.28

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipeswith collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe

110

-

384.91

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thickwith cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement completeas per standard design : Inside size 90x80 cm and 45 cm deep including C.I.Size 90x80 cmcover with frame (light duty) 455x610 mm internaldimensions, total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

16

-

8833.7

... More
Extra for depth for manholes :Size 90x80 cm

2

-

6104.74

... More
Supplying and stacking at site.90 mm to 45 mm size stone aggregate

21.6

-

1451.51

... More
Stone screening 11.2 mm nominal size (Type B)

35.1

-

1554.82

... More
Red Bajri

20.25

-

1082.48

... More
Drilling of 300mm. Dia bore hole manually

30

-

475

... More
Supply of 160mm dia sloted rigid PVC pipe (4kg./sqcm pressure rating) and accessories

30

-

902.5

... More
supply and fixing of nylon jali around the sloted pipes complet as required

1

-

1900

... More
Providing and packing of coarse sand around the pipe

2.5

-

1082.48

... More
transport of Boring tools other required equipments and instalation at site

1

-

76

... More
Lowering of 100mm. Dia rigid P.V.C. pipe in bore hole including cutting jointing etc. complete

30

-

76

... More
Construction of Interlocking Road

-

-

-

... More
Earth work in exacavtion in trenches for foundatione land for pipes cables etc. in ordinary soil (loan clay or sand) including lift upto 1:5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c With in a lead of 50m.

4.11

-

180.06

... More
providing and laying in cemrmt concrete 1:4:8 (1 cement 4 coarse sand 4 graded stone aggregate 40 mm nominal size) and curing complete, inlcuding cost if form-work . In foundation and floors.

35.21

-

4712.03

... More
Class 150 brick work in 1:4 cement and Coarse sand of 2.20 fineness modulus mortar in foundation and plinth including supply of all material, labour and tools nd plants etc. required for proper completion of the work

5.42

-

5098.6

... More
Cement concrete flooring 1:2:4(1 Cement ;2 coarse sand : finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc complete

1.18

-

5449.75

... More
12mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc.

25.67

-

237.71

... More
Providing and laying of 80mm thick I shaped Rubber Moulded Interlocking tile Block of Grey Colour Labour Rate only.

207.39

-

755.02

... More
Construction of Strom Water Drain

-

-

-

... More
Earth work in exacavtion in trenches for foundatione land for pipes cables etc. in ordinary soil (loan clay or sand) including lift upto 1:5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c With in a lead of 50m.

72.03

-

180.06

... More
providing and laying in cemrmt concrete 1:2:4 (1 cement 4 coarse sand 4 graded stone aggregate 40 mm nominal size) and curing complete, inlcuding cost if form-work . In foundation and floors.

13.08

-

4712.03

... More
Class 150 brick work in 1:4 cement and Coarse sand of 2.20 fineness modulus mortar in foundation and plinth including supply of all material, labour and tools nd plants etc. required for proper completion of the work

31.86

-

5098.6

... More
Cement concrete flooring 1:2:4(1 Cement ;2 coarse sand : finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc complete

2.31

-

5449.75

... More
20 mm Cement plaster on singal or half brick wall finished with a floating coat of neat cement of mix : 1:3(1 cement; 3 Coarse sand)

209.3

-

406.18



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.