UP Jal Nigam Tender

CHLORINATION SYSTEM FOR 110 & 45 MLD POST DOSING : B1 CHLORINATION EQUIPMENT 1. Supply of Vacuum Type Solution Feed Chlorination Plant, Capacity : 15 Kg / Hr, Consist of:- 1) Remote Vacuum Regulator, 2) Remote Injector, 3) Chlorine Flow Meter (Rota Meter), 4) Chlorine Rate Control Valve, 5) Primary Check Valve, 6) Vent & Vacuum Tubing, 7) Cabinet -2 Nos. (1W+1S) 2. Vacuum Gauge 2 Nos. 3. Skid for Chlorinator 1 Set B2 CHLORINE GAS ACCESSORIES FOR CHLORINATOR 4. 100 mm Chlorine Pressure Gauge On Header Line. 1 Nos. 5. 18 NB Schedule 80 Carbon Steel Gas Manifold As Per A.S.T.M. B. 106, suitable for 3 nos. toner connection and 2 nos. RVR - 1 Nos. 6. C.S. 1 Moisture Trap - 1 Nos. 7. Copper Tubing of 1.5 Mtr. Length - 3 Nos. 8. Isolation Valve On Gas Manifold And Chlorinator Inlet - 6 Nos. 9. Auxiliary Yoke Clamp with Adaptor - 3 Nos. 10. Skid for Gas Manifold 1 Nos. 11. Roller support for 2 nos. toner - 6 nos.

B3 BOOSTER PUMP WITH PIPING/VALVES & SOLUTION DOSING ACCESSORIES 12. 100 mm Water Pressure Gauge On Ejector Inlet. 2 Nos. 13. Booster Pump, 9m3/hr flow @ 40 mtr. head 2 Nos. 14. 1.5” PVC Ejector Inlet & Outlet Valve 4 Nos. 15. 1.5” NRV On Solution Line 2 Nos. 16. Strainer for Booster Pump suction 2 Nos. 17. Ball Valve for Inlet & Outlet with interconnecting of Booster pump 5 Nos. 18. Diffuser 1 Nos. 19. Flow meter on solution line with interconnecting valve 2 Nos. 20. C-Class materials such as nut/bolt/gasket etc. [C] PIPING FOR RAW WATER & CHLORINE SOLUTION DOSING FOR PRE & POST DOSING : 1. UPVC Pipe for Water Suction & Discharge of booster pump for both pre & Post, Size : 1.5”, 2” & 2.5” - 40 Mtr. 2. UPVC Pipe for Chlorine solution dosing for both pre & Post, Size : 2” & 2.5” - 500 Mtr.

SAFETY ITEMS

1. Chlorine Leak Detector with single sensor - 1 Nos. 2. Self Contained Air Breathing Apparatus Set - 1 Nos. 3. Safety Shower with Eye Wash - 1 Nos. 4. Ammonia Torch with Bottle - 1 Nos. 5. Canister type Gas Mask - 1 No. 6. Protective Clothing - 1 No. 7. First Aid Box - 1 No. 8. Emergency Repair Kit - 1 Set

E. CHLORINE TONNER LEAK ABSORPTION SYSTEM: I Mechanical Items 1. FRP Hood - 6 Nos. 2. PVC Duct Line - As Per Ga 6” 3. Blower (Cs+Frp) - 2 Nos. 1500 m3/h@300mmwc 4. Packed Column Absorption Tower - 1 Nos. 1 Ton Dissolved 5. Caustic Storage Tank - 1 Nos. 6+0.5 m3 6. Caustic Circulation Pump - 2 Nos. 20 M3/Hr.@30 M. 7. Damper Valve At Blower Inlet/Outlet - 2 Nos. 6” 8. PP Isolaiton Ball Valve At Caustic Pump Interconnecting And Drain Line - 10 Nos 2” 9. PP NRV - 1 Nos. 2” 10. PP Y Type Strainer - 1 Nos. 2” 11. PVC Ball Valve For Flushing - 5 Nos. 1/2" 12. Caustic Circulation Line - 30 Mtr. 3” 13. Flexible Hose 3 Mtr. 2” 14. Ball Valve For Level Gauge - 2 Nos. 1” 15. Valves For Instruments - 2 Nos. 1/2" - Ii Electrical & Instrument Items 16. Motor For Blower - 1 Nos. 3.7 Kw@1500 Rpm 17. Motor For Caustic Circulation Pump - 1 Nos. 3.7 Kw/2900 Rpm Abb 18. Pressure Gauge for Caustic Pump - 1 Nos. 0-6 Kg/Cm2 19. Pressure Gauge at Blower Discharge - 1 Nos. 0-600 Mmwc 20. Level Switch High/Low - 2 No. Float Type 21. Level Gauge - 1 No. Magnetic Type

Necessary arrengement for chlorine leak absorption system complete with material , labour etc complete in all respect.

Note :- Salvage value of old material will be deducted @ 0.1% of tender value.