UP Jal Nigam Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam Tender
Civil And Construction
Drainage Work
Eprocure
Opening Date27 Oct 2022
Closing Date3 Nov 2022
Tender Amount₹ 3,71,91,000
Costs
EMD
₹ 7,44,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CDSNW_742478_1Bid Award Id
ViewTender No
1115/Karya-27/C227/6 DT-15-10-2022 GZBTender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
dzadjhV Qzse lajpuk Hkou%&
-
-
-
jkf= foJke d{k%
-
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
167.38
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
212.49
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
-
-
-
Sand Filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work and i/c watering dressing etc.
16.74
-
-
Providing and applying of Anti termite treatment as per specification
167.38
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
22.37
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
43.18
-
-
Painting on DPC with two coats of air blown bitumen 85/50 or 85/25 @ 1.7Kg/Sqm. Approx i/c cost of fuel if any
43.18
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
90.51
-
-
Providing & Making of 230 mm th. Brick work in Super Structure in 1:6 cement coarse sand mix mortor complete
136.14
-
-
Providing & casting of 1:1½:3 mix Grade in roof slab excluding shuttering etc.
20.09
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Suspended floors, roofs, landings, balconies and access platform
167.38
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
19.71
-
-
P/appying of Plaster on ceiling in 1:3 cement C.sand mix mortor complete.
161.35
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
574.05
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
674.77
-
-
Making groove 10 to 12 mm wide x 8 mm deep in plaster of wall or in ceiling vertically or horizontally as required.
-
-
-
P/Fixing of Ceramic tile on wall in size 300x450mm in 1:3 cement C.sand mix mortor complete. In Toilets
23.54
-
-
4.0cm th. 1:2:4 plain concrete floor with cement, coarse and 2cm graded approved stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement & marble dust in ration of 5:1 as per specified over and i/c 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in proporation of 1:4:8 and removing any and giving them a niform finish, i/c supply of all material & labour complete. (without base)
150.64
-
-
Cement plaster 18mm th. skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
17.92
-
-
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
3.6
-
-
Providing and fixing MS hand rail & grill of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
129.6
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm
6
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
6
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
150.64
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
1049.25
-
-
P/Applying of water proof cement paint of approved quality on new work with final coat to give an shade i/c all tools & plants complete
337.38
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
18
-
-
Providing and fixing soil, waste and vent pipes : (100 mm dia for rain water)
7
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc
4
-
-
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia
4
-
-
Providing and fixing heal rest bend of required degree (100mm dia)
2
-
-
SANITARY WORK: (NIGHT CELL)
-
-
-
Providing and fixing of 100mm dia 6Kg pressure PVC Pipe for soil, waste and vent pipe.inclusive of socket & snecessary fittings
42
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
40
-
-
P/Fixing of Square mouth SW Gully trap class SP-1 complete with CI grating brick masonary chamber with water tight C.I. Cover with frame of 300x300mm size (inside) the wt of cover to be not less than 4.50 kg and frame to be not less then 2.70 kg as per standard design with sewer brick conforming to IS: 4885.
8
-
-
P/Laying of Non Pressure NP2 pipe class light duty RCC pipe with coller jointed with stiff mixture of cement in proportion of 1:2 cement and sand including testing of joint etc for 150 mm dia
28
-
-
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
28
-
-
Constructing sewer brick IS 4885 manhole in cement mortar 1:4 cement & coarse sand with RCC top slab in 1:2:4 mix and base PCC 1:4:8 mix, including inside plastering in 1:3 cement coarse sand finish with floting coat of cement and making channels in cement concrete finishing with a flosting coat of cement complete.
-
-
-
Insde size 90x80x45cm including CI cover with frame light duty.
4
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc
-
-
-
i) 15 mm dia pipe
10.4
-
-
ii) 20 mm dia pipe
34
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
-
-
-
i) 15 mm dia
8
-
-
P.T.M.T. extension nipple 20 mm dia
6
-
-
Fixture:
-
-
-
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms
8
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
3
-
-
125 mm grating with waste hole
8
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
4
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with 15 mm CP Brass single hole basin mixer
8
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Electrical
-
-
-
SUB-HEAD - I : INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -A
36
-
-
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
4
-
-
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with two way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
4
-
-
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess steel conduit as required
-
-
-
2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
130
-
-
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
150
-
-
2 X 4.0 sqmm +1 X 4.0 sqmm earth wire
150
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
75mm X 75mm X 60 mm deep
2
-
-
100mm X 100mm X 60 mm deep
2
-
-
150mm X 75mm X 60 mm deep
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
6
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
Supplying and fixing and concealing of 16 SWG (1.5mm) thick rigid steel conduit pipe in wall including cutting of brick work, laying of conduit and fixing it with MS hooks and then plastering with cement, sand mortar finished to the level, with matching color wash including cost of proper threading of the conduit and providing necessary socket, bends and check nuts and as directed ny the Engineer in charge with the supply of all material labour and T&P required for proper completion of work.
-
-
-
20mm dia conduit
25
-
-
25mm dia conduit
30
-
-
Supply and fixing and concealing of 2 mm thick PVC conduit with PVC accessories confirming to IS N0. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid .plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I / C .
-
-
-
20mm dia PVC conduit
50
-
-
25mm dia PVC conduit
50
-
-
32mm dia PVC conduit
35
-
-
SUB-HEAD II - FANS & LIGHT FIXTURES:
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
22
-
-
2420 system lumens, 110 Im/W, PF0.95, THD10%, CRI80, sheet Thickness 0.8 mm, Tube with aluminium heat with 5 year warrantee
-
-
-
Supply and fixing of call bell
2
-
-
Supplying, fixing, connecting, testing and commissioning of Bulkhead type light fitting complete with , wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc. as required similar to Philips Cat. No. WT202W P LED 6S CW PSU S1 PC P3495 or equivalent
4
-
-
Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
2
-
-
BEE 5 Star rated-1200 mm sweep
-
-
-
Supply & Erection and testing of Ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
2
-
-
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
-
-
-
300 mm 900 RPM HD Exhaust Fan.
2
-
-
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
Supply and fixing of flush/surface mounting 4 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by engineer incharge. CAT A
2
-
-
S&F of 40 Amp. 4 pole MCB (10 KA)
2
-
-
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
12
-
-
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
3.5 x 35 sq.mm
315
-
-
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
-
-
-
35 sq.mm
10.5
-
-
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
50 sq.mm
31.5
-
-
supply and laying of GI pipe with required socket under ground at the depth of 750 mm below complete in all respect.
-
-
-
100 mm dia
50
-
-
SUB-HEAD -V : EARTHING
-
-
-
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
50
-
-
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
2
-
-
B) DAY CELL
-
-
-
CIVIL WORK
-
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
19515.44
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
6029.98
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
112.2
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
14.03
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :
67.35
-
-
RCC work with cement approved coarse sand and 2cm gauge approved stone ballast in proportion 1:1½:3 in lintals of door and windows, excluding its fixing and binding of steel and including necessary centering & shuttering etc. and also i/c S/o material required for proper completion of work. Binding wire to be supplied by the contractor free of cost. (In Column) upto plinth
6.05
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
40.32
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
4.75
-
-
P/A of 12mm th Plaster in 1:6 cement c.sand mix ( 1cement: 4 c sand) on wall
147.6
-
-
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
84.18
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
40.32
-
-
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
16.56
-
-
P/Making of UG tank for drinking Water of cap. 500 ltr each in 4 cage
1000
-
-
HkaMkj dsUnz%
-
-
-
flfoy dk;Z
1
-
-
SANITARY WORK: (FEEDING STORE)
-
-
-
Providing and fixing of 100mm dia 6Kg pressure PVC Pipe for soil, waste and vent pipe.inclusive of socket & snecessary fittings
4.5
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
4.5
-
-
P/Fixing of Square mouth SW Gully trap class SP-1 complete with CI grating brick masonary chamber with water tight C.I. Cover with frame of 300x300mm size (inside) the wt of cover to be not less than 4.50 kg and frame to be not less then 2.70 kg as per standard design with sewer brick conforming to IS: 4885.
1
-
-
P/Laying of Non Pressure NP2 pipe class light duty RCC pipe with coller jointed with stiff mixture of cement in proportion of 1:2 cement and sand including testing of joint etc for 150 mm dia
5
-
-
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
5
-
-
Constructing sewer brick IS 4885 manhole in cement mortar 1:4 cement & coarse sand with RCC top slab in 1:2:4 mix and base PCC 1:4:8 mix, including inside plastering in 1:3 cement coarse sand finish with floting coat of cement and making channels in cement concrete finishing with a flosting coat of cement complete.
-
-
-
Insde size 90x80x45cm including CI cover with frame light duty.
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc
-
-
-
i) 15 mm dia pipe
3.2
-
-
ii) 20 mm dia pipe
13.5
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
-
-
-
i) 15 mm dia
1
-
-
P.T.M.T. extension nipple 20 mm dia
2
-
-
Fixture:
-
-
-
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms
1
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
1
-
-
125 mm grating with waste hole
1
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
1
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm with drain board
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
-
-
Electrical
-
-
-
SUB-HEAD - I : INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -A
4
-
-
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
1
-
-
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess steel conduit as required
-
-
-
2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
5
-
-
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
5
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
75mm X 75mm X 60 mm deep
1
-
-
150mm X 75mm X 60 mm deep
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
1
-
-
SUB-HEAD II - FANS & LIGHT FIXTURES:
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
2
-
-
2420 system lumens, 110 Im/W, PF0.95, THD10%, CRI80, sheet Thickness 0.8 mm, Tube with aluminium heat with 5 year warrantee
-
-
-
Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
1
-
-
BEE 5 Star rated-1200 mm sweep
-
-
-
Supply & Erection and testing of Ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
1
-
-
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
-
-
-
300 mm 900 RPM HD Exhaust Fan.
-
-
-
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
-
-
S&F of 40 Amp. 4 pole MCB (10 KA)
1
-
-
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
2
-
-
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
4 x 16 sq.mm
4
-
-
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
-
-
-
35 sq.mm
2
-
-
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
50 sq.mm
2
-
-
VETERINARY HOSPITAL
-
-
-
flfoy dk;Z
-
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
378.8
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
125.12
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
183.36
-
-
Sand Filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work and i/c watering dressing etc.
42.92
-
-
Providing and applying of Anti termite treatment as per specification
378.8
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
57.49
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
52.95
-
-
Painting on DPC with two coats of air blown bitumen 85/50 or 85/25 @ 1.7Kg/Sqm. Approx i/c cost of fuel if any
52.95
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
38.96
-
-
Providing & Making of 230 mm th. Brick work in Super Structure in 1:6 cement coarse sand mix mortor complete
170.53
-
-
Providing & Making of 115 mm th. Brick work in Super Structure in 1:4 cement coarse sand mix mortor complete
14.31
-
-
Providing & casting of 1:1½:3 mix Grade in Column footing excluding shuttering etc.
11
-
-
Providing & casting of 1:1½:3 mix Grade in Grid Beam & Plinth Beam excluding shuttering etc.
44.47
-
-
Providing & casting of 1:1½:3 mix Grade in Column excluding shuttering etc.
5.15
-
-
Providing & casting of 1:1½:3 mix Grade in Column excluding shuttering etc.
12.59
-
-
Providing & casting of 1:1½:3 mix Grade in Slab & beam excluding shuttering etc.
61.1
-
-
Providing & casting of 1:1½:3 mix Grade in Lintal beam excluding shuttering etc.
3.66
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
193.45
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
65.12
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
363.94
-
-
Suspended floors, roofs, landings, balconies and access platform
451.39
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
76.27
-
-
P/appying of Plaster on ceiling in 1:3 cement C.sand mix mortor complete.
330.58
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
676.76
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
826.95
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:4 cement C.sand mix mortor complete.
71.85
-
-
P/Fixing of Ceramic tile on wall in size 300x450mm in 1:3 cement C.sand mix mortor complete. In Toilets
45.36
-
-
P/Fixing of Rectrified tile on floor in size 300x300mm in 1:3 cement C.sand mix mortor complete. In Toilets
9.45
-
-
Providing and laying Vitrified tiles (On Wall) in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (600x600)
254.01
-
-
25mm th.Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
227.59
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).TEAK Wood
0.63
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
31.5
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
-
-
-
Teak wood 50x20mm
67.5
-
-
Providing and fixing bright finished Anodised Aluminium tower bolts (barrel type) with necessary screws etc. complete :
-
-
-
250x10 mm
13
-
-
150x10 mm
13
-
-
Providing and fixing bright finished Anodised Aluminium Handle with necessary screws etc. complete : 125mm
26
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
1.08
-
-
Providing and fixing MS hand rail & grill of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
1685.7
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm
42
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
126
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm
size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
30.24
-
-
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
55.16
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
378.8
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
1079.19
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
330.98
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
212.28
-
-
Providing and fixing soil, waste and vent pipes : (100 mm dia for rain water)
22.5
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc
24
-
-
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia
24
-
-
Providing and fixing heal rest bend of required degree (100mm dia)
6
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
79.43
-
-
Brick edgeing 7cm wide 11.4cm deep to plinth proection with bricks of class designation 75 i/c grouting with cement mortor 1:4 mix.
88.26
-
-
P/Making of Apron drain of width 150mm and deep as per requirement of site but 200mm with neat cement finish with proper slope complete.
73.08
-
-
SANITARY WORK: (VET HOSPITAL)
-
-
-
Providing and fixing of 100mm dia 6Kg pressure PVC Pipe for soil, waste and vent pipe.inclusive of socket & snecessary fittings
126.8
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
128
-
-
P/Fixing of Square mouth SW Gully trap class SP-1 complete with CI grating brick masonary chamber with water tight C.I. Cover with frame of 300x300mm size (inside) the wt of cover to be not less than 4.50 kg and frame to be not less then 2.70 kg as per standard design with sewer brick conforming to IS: 4885.
16
-
-
P/Laying of Non Pressure NP2 pipe class light duty RCC pipe with coller jointed with stiff mixture of cement in proportion of 1:2 cement and sand including testing of joint etc for 150 mm dia
126
-
-
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
126
-
-
Constructing sewer brick IS 4885 manhole in cement mortar 1:4 cement & coarse sand with RCC top slab in 1:2:4 mix and base PCC 1:4:8 mix, including inside plastering in 1:3 cement coarse sand finish with floting coat of cement and making channels in cement concrete finishing with a flosting coat of cement complete.
-
-
-
Insde size 90x80x45cm including CI cover with frame light duty.
8
-
-
Extra for depth for manholes :
-
-
-
Size 90x80 cm
6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.Concealed work, including cutting chases and making good the walls etc
-
-
-
i) 15 mm dia pipe
36
-
-
ii) 20 mm dia pipe
248
-
-
iii) 40mm dia pipe
86.59
-
-
iv) 50mm dia pipe
28.4
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
-
-
-
i) 15 mm dia
8
-
-
ii) 40 mm dia
4
-
-
iii) 50 mm dia
4
-
-
P.T.M.T. extension nipple 20 mm dia
2
-
-
Fixture:
-
-
-
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms
4
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
16
-
-
125 mm grating with waste hole
8
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
8
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with 15 mm CP Brass single hole basin mixer
8
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
8
-
-
Providing and fixing C.P. brass toilet paper holder :
4
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
8
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
8
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
-
Electrical
-
-
-
SUB-HEAD - I : INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -C
72
-
-
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
10
-
-
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with two way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
7
-
-
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess steel conduit as required
-
-
-
2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
250
-
-
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
350
-
-
2 X 4.0 sqmm +1 X 4.0 sqmm earth wire
200
-
-
2 X 6.0 sqmm +1 X 6.0 sqmm earth wire
200
-
-
4 X 6.0 sqmm +2 X 6.0 sqmm earth wire
200
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
75mm X 75mm X 60 mm deep
8
-
-
100mm X 100mm X 60 mm deep
8
-
-
150mm X 75mm X 60 mm deep
8
-
-
200mm X 150mm X 60 mm deep
8
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
10
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
10
-
-
Supplying and fixing and concealing of 16 SWG (1.5mm) thick rigid steel conduit pipe in wall including cutting of brick work, laying of conduit and fixing it with MS hooks and then plastering with cement, sand mortar finished to the level, with matching color wash including cost of proper threading of the conduit and providing necessary socket, bends and check nuts and as directed ny the Engineer in charge with the supply of all material labour and T&P required for proper completion of work.
-
-
-
20mm dia conduit
55
-
-
25mm dia conduit
20
-
-
32mm dia conduit
20
-
-
Supply and fixing and concealing of 2 mm thick PVC conduit with PVC accessories confirming to IS N0. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid .plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I / C .
-
-
-
20mm dia PVC conduit
50
-
-
25mm dia PVC conduit
50
-
-
32mm dia PVC conduit
40
-
-
SUB-HEAD II - FANS & LIGHT FIXTURES:
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
50
-
-
2420 system lumens, 110 Im/W, PF0.95, THD10%, CRI80, sheet Thickness 0.8 mm, Tube with aluminium heat with 5 year warrantee
-
-
-
Supply and fixing of call bell
7
-
-
Supply and fixing of recess/surface mounting round 18 W to 20 W LED Cut out Min 150 mm, Height Min. 40mm, LED Down lighiter having powder coated die cast aluminium housing with heat shink,diffuser/reflector and driver set. suitable for 24Hr Continuous Operation, Complete in all respect. CAT. - AAA
4
-
-
1980-2200 system lumens, 1101m/W, PF0.95, THD10% at full load, CRI80, with 5 year warrantee
-
-
-
Supplying, fixing, connecting, testing and commissioning of Bulkhead type light fitting complete with , wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc. as required similar to Philips Cat. No. WT202W P LED 6S CW PSU S1 PC P3495 or equivalent
18
-
-
Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
7
-
-
BEE 5 Star rated-1200 mm sweep
-
-
-
Supply & Erection and testing of Ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
7
-
-
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
-
-
-
300 mm 900 RPM HD Exhaust Fan.
7
-
-
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
Supply and fixing of flush/surface mounting 6 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by engineer incharge. CAT A
2
-
-
S&F of 63 Amp. TP MCB (10 KA) C Curve
2
-
-
S&F of 40 Amp. 4 pole MCB (10 KA)
4
-
-
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
2
-
-
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
68
-
-
Supplying and fixing following rating, 4 pole, 415 volts, 30 mA ELCB/RCCB in the existing MCB DB complete with connections, etc. as required.
-
-
-
63 amps
2
-
-
S&F and making connection of 40A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
2
-
-
Supply& Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entrise Electrical control panel with TPN ACB (65 KA,4Pole Elect draw out , Micor processer Release IPR2) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects.
-
-
-
The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter,Selector switches for ammeter and Voltmeter, instrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
-
-
-
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfomers and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm.Cubicle type switch board shall be of cat A & B Only. CAT. B Cubicle Type (As a Lighting)
-
-
-
INCOMER:-
-
-
-
1 Nos. 200 Amps. 4P MCCB (36 KA) MCCB with variable current settings
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-315 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
1
-
-
BUS BARS:-
-
-
-
400 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
01 Nos. 100A FP, MCB (25KA).
-
-
-
03 Nos. 63A FP, MCB (25KA).
-
-
-
(or As per requirment directed by Project Manager.)
-
-
-
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
3.5 x 70 sq.mm
155
-
-
3.5 x 50 sq.mm
165
-
-
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
-
-
-
70 sq.mm
7
-
-
50 sq.mm
6
-
-
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
70 sq.mm
21
-
-
50 sq.mm
18
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
250mm dia
30
-
-
supply and laying of GI pipe with required socket under ground at the depth of 750 mm below complete in all respect.
-
-
-
100 mm dia
30
-
-
SUB-HEAD -V : EARTHING
-
-
-
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
70
-
-
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
3
-
-
laxjks/k dsUnz%
-
-
-
flfoy dk;Z
-
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
99.96
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
30.15
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
30.82
-
-
Sand Filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work and i/c watering dressing etc.
7.97
-
-
Providing and applying of Anti termite treatment as per specification
99.96
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
25.84
-
-
Painting on DPC with two coats of air blown bitumen 85/50 or 85/25 @ 1.7Kg/Sqm. Approx i/c cost of fuel if any
14.14
-
-
Providing & casting of 1:1½:3 mix Grade in Column Footing excluding Shuttering shuttering etc.
3
-
-
Providing & casting of 1:1½:3 mix Grade in Ground Beam excluding Shuttering shuttering etc.
12.54
-
-
Providing & casting of 1:1½:3 mix Grade in Column excluding Shuttering shuttering etc.
3.11
-
-
Providing & casting of 1:1½:3 mix Grade in Lintal Beam excluding Shuttering shuttering etc.
0.55
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
12
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
92.21
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
49.29
-
-
Suspended floors, roofs, landings, balconies and access platform
84.39
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
7.78
-
-
Providing & Making of 230 mm th. Brick work in Super Structure in 1:6 cement coarse sand mix mortor complete
16.59
-
-
Providing & casting of 1:1½:3 mix Grade in roof slab including shuttering etc.
9.71
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
38.29
-
-
P/appying of Plaster on ceiling in 1:3 cement C.sand mix mortor complete.
68.48
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
102.76
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
141.69
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
68.8
-
-
P/Fixing of Ceramic tile on wall in size 300x450mm in 1:3 cement C.sand mix mortor complete. In Toilets
129.85
-
-
4.0cm th. 1:2:4 plain concrete floor with cement, coarse and 2cm graded approved stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement & marble dust in ration of 5:1 as per specified over and i/c 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in proporation of 1:4:8 and removing any and giving them a niform finish, i/c supply of all material & labour complete. (without base)
65.22
-
-
Cement plaster 18mm th. skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
3.99
-
-
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer
3.78
-
-
Providing and fixing MS hand rail & grill of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
1364.4
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
10.8
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm
10
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
8
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
69.72
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
55.43
-
-
P/Applying of water proof cement paint of approved quality on new work with final coat to give an shade i/c all tools & plants complete
141.69
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
112.26
-
-
Providing and fixing soil, waste and vent pipes : (100 mm dia for rain water)
8.2
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc
8
-
-
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia
8
-
-
Providing and fixing heal rest bend of required degree (100mm dia)
2
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
20.3
-
-
Brick edgeing 7cm wide 11.4cm deep to plinth proection with bricks of class designation 75 i/c grouting with cement mortor 1:4 mix.
20.3
-
-
P/Making of Apron drain of width 150mm and deep as per requirement of site but 200mm with neat cement finish with proper slope complete.
25.92
-
-
SANITARY WORK: (QUARANTINE)
-
-
-
Providing and fixing of 100mm dia 6Kg pressure PVC Pipe for soil, waste and vent pipe.inclusive of socket & snecessary fittings
47.5
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
40
-
-
P/Fixing of Square mouth SW Gully trap class SP-1 complete with CI grating brick masonary chamber with water tight C.I. Cover with frame of 300x300mm size (inside) the wt of cover to be not less than 4.50 kg and frame to be not less then 2.70 kg as per standard design with sewer brick conforming to IS: 4885.
2
-
-
P/Laying of Non Pressure NP2 pipe class light duty RCC pipe with coller jointed with stiff mixture of cement in proportion of 1:2 cement and sand including testing of joint etc for 150 mm dia
18.8
-
-
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
18.8
-
-
Constructing sewer brick IS 4885 manhole in cement mortar 1:4 cement & coarse sand with RCC top slab in 1:2:4 mix and base PCC 1:4:8 mix, including inside plastering in 1:3 cement coarse sand finish with floting coat of cement and making channels in cement concrete finishing with a flosting coat of cement complete.
-
-
-
Insde size 90x80x45cm including CI cover with frame light duty.
6
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc
-
-
-
i) 15 mm dia pipe
3.6
-
-
ii) 20 mm dia pipe
26
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
-
-
-
i) 15 mm dia
1
-
-
P.T.M.T. extension nipple 20 mm dia
3
-
-
Fixture:
-
-
-
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms
1
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
3
-
-
125 mm grating with waste hole
2
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
2
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with 15 mm CP Brass single hole basin mixer
2
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Electrical
-
-
-
SUB-HEAD - I : INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -A
17
-
-
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
2
-
-
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with two way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
1
-
-
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess steel conduit as required
-
-
-
2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
80
-
-
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
100
-
-
2 X 4.0 sqmm +1 X 4.0 sqmm earth wire
100
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
75mm X 75mm X 60 mm deep
2
-
-
100mm X 100mm X 60 mm deep
2
-
-
150mm X 75mm X 60 mm deep
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
2
-
-
M
1
-
-
Supplying and fixing and concealing of 16 SWG (1.5mm) thick rigid steel conduit pipe in wall including cutting of brick work, laying of conduit and fixing it with MS hooks and then plastering with cement, sand mortar finished to the level, with matching color wash including cost of proper threading of the conduit and providing necessary socket, bends and check nuts and as directed ny the Engineer in charge with the supply of all material labour and T&P required for proper completion of work.
-
-
-
20mm dia conduit
15
-
-
25mm dia conduit
15
-
-
Supply and fixing and concealing of 2 mm thick PVC conduit with PVC accessories confirming to IS N0. 3419 for drawing wires duly sealed at joints with original resin /adhesive to make the complete piping rigid .plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. required for proper completion of the work as per directions and to the satisfaction of engineer I / C .
-
-
-
20mm dia PVC conduit
20
-
-
25mm dia PVC conduit
20
-
-
32mm dia PVC conduit
20
-
-
SUB-HEAD II - FANS & LIGHT FIXTURES:
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
8
-
-
2420 system lumens, 110 Im/W, PF0.95, THD10%, CRI80, sheet Thickness 0.8 mm, Tube with aluminium heat with 5 year warrantee
-
-
-
Supply and fixing of call bell
1
-
-
Supplying, fixing, connecting, testing and commissioning of Bulkhead type light fitting complete with , wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc. as required similar to Philips Cat. No. WT202W P LED 6S CW PSU S1 PC P3495 or equivalent
4
-
-
Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
2
-
-
BEE 5 Star rated-1200 mm sweep
-
-
-
Supply & Erection and testing of Ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
2
-
-
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
-
-
-
300 mm 900 RPM HD Exhaust Fan.
1
-
-
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
Supply and fixing of flush/surface mounting 4 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by engineer incharge. CAT A
1
-
-
S&F of 40 Amp. 4 pole MCB (10 KA)
1
-
-
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
5
-
-
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
3.5 x 35 sq.mm
165
-
-
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
-
-
-
35 sq.mm
10
-
-
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
50 sq.mm
10
-
-
supply and laying of GI pipe with required socket under ground at the depth of 750 mm below complete in all respect.
-
-
-
100 mm dia
20
-
-
SUB-HEAD -V : EARTHING
-
-
-
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
45
-
-
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
1
-
-
Vk;WysV Cykd ¼2 ux½%
-
-
-
flfoy dk;Z
-
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
7.51
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
12.29
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
-
-
-
Sand Filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work and i/c watering dressing etc.
0.76
-
-
Providing and applying of Anti termite treatment as per specification
7.51
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
1.2
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
2.45
-
-
Painting on DPC with two coats of air blown bitumen 85/50 or 85/25 @ 1.7Kg/Sqm. Approx i/c cost of fuel if any
2.45
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
7.47
-
-
Providing & Making of 230 mm th. Brick work in Super Structure in 1:6 cement coarse sand mix mortor complete
7.77
-
-
Providing & Making of 115 mm th. Brick work in Super Structure in 1:4 cement coarse sand mix mortor complete
5.49
-
-
Providing & casting of 1:1½:3 mix Grade in roof slab excluding shuttering etc.
0.91
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
3.51
-
-
Suspended floors, roofs, landings, balconies and access platform
7.51
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
1.07
-
-
P/appying of Plaster on ceiling in 1:3 cement C.sand mix mortor complete.
10.82
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
33.63
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
39.95
-
-
P/Fixing of Ceramic tile on wall in size 300x450mm in 1:3 cement C.sand mix mortor complete. In Toilets
23.99
-
-
P/Fixing of Ceramic tile on floor in size 300x450mm in 1:3 cement C.sand mix mortor complete. In Toilets
6.62
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame
9.9
-
-
Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable
blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
3.15
-
-
Providing and fixing MS hand rail & grill of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
5.4
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm
4
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
4
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
7.51
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
84.4
-
-
P/Applying of water proof cement paint of approved quality on new work with final coat to give an shade i/c all tools & plants complete
39.95
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
4.86
-
-
Providing and fixing soil, waste and vent pipes : (100 mm dia for rain water)
4.5
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc
4
-
-
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia
4
-
-
Providing and fixing heal rest bend of required degree (100mm dia)
1
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
8.69
-
-
Brick edgeing 7cm wide 11.4cm deep to plinth proection with bricks of class designation 75 i/c grouting with cement mortor 1:4 mix.
11.58
-
-
P/Making of Apron drain of width 150mm and deep as per requirement of site but 200mm with neat cement finish with proper slope complete.
11.58
-
-
SANITARY WORK: (TOILET BLOCK)
-
-
-
Providing and fixing of 100mm dia 6Kg pressure PVC Pipe for soil, waste and vent pipe.inclusive of socket & snecessary fittings
9.2
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
6.2
-
-
P/Fixing of Square mouth SW Gully trap class SP-1 complete with CI grating brick masonary chamber with water tight C.I. Cover with frame of 300x300mm size (inside) the wt of cover to be not less than 4.50 kg and frame to be not less then 2.70 kg as per standard design with sewer brick conforming to IS: 4885.
2
-
-
Earth excavation for sewer line or drain line etc upto 1.5 mtr depth complete with dressing and slop etc.
4
-
-
Constructing sewer brick IS 4885 manhole in cement mortar 1:4 cement & coarse sand with RCC top slab in 1:2:4 mix and base PCC 1:4:8 mix, including inside plastering in 1:3 cement coarse sand finish with floting coat of cement and making channels in cement concrete finishing with a flosting coat of cement complete.
-
-
-
Insde size 90x80x45cm including CI cover with frame light duty.
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc
-
-
-
i) 15 mm dia pipe
3
-
-
ii) 20 mm dia pipe
7
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
-
-
-
i) 15 mm dia
1
-
-
P.T.M.T. extension nipple 20 mm dia
2
-
-
Fixture:
-
-
-
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms
2
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
3
-
-
125 mm grating with waste hole
2
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
2
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with 15 mm CP Brass single hole basin mixer
1
-
-
Electrical
-
-
-
SUB-HEAD - I : INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
Group -A
4
-
-
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
1
-
-
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess steel conduit as required
-
-
-
2 X 1.5 sqmm +1 X 1.5 sqmm earth wire
6
-
-
2 X 2.5 sqmm +1 X 2.5 sqmm earth wire
5
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
75mm X 75mm X 60 mm deep
1
-
-
150mm X 75mm X 60 mm deep
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
1
-
-
SUB-HEAD II - FANS & LIGHT FIXTURES:
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA
3
-
-
2420 system lumens, 110 Im/W, PF0.95, THD10%, CRI80, sheet Thickness 0.8 mm, Tube with aluminium heat with 5 year warrantee
-
-
-
Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
-
-
-
BEE 5 Star rated-1200 mm sweep
-
-
-
Supply & Erection and testing of Ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
-
-
-
Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire including MS drum as required.
-
-
-
300 mm 900 RPM HD Exhaust Fan.
2
-
-
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
-
-
S&F of 40 Amp. 4 pole MCB (10 KA)
1
-
-
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
3
-
-
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
4 x 16 sq.mm
20
-
-
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.
-
-
-
35 sq.mm
2
-
-
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
50 sq.mm
2
-
-
BOUNDARY WALL OF RESCUE CENTER
-
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
467.11
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
34.49
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
98.5
-
-
Providing & Making of 230 mm th. Brick work in Super Structure in 1:6 cement coarse sand mix mortor complete
291.55
-
-
Providing & casting of 1:1½:3 mix Grade in Plinth beam & Footing excluding shuttering etc.
47.45
-
-
Above Plinth Beam
-
-
-
Providing & casting of 1:1½:3 mix Grade in column excluding shuttering etc.
84.98
-
-
Providing & casting of 1:1½:3 mix Grade in Beam excluding shuttering etc.
116.84
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
118.6
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1038.6
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
679
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
303.94
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
1524.56
-
-
P/Appying of 15 mm th Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
1938.41
-
-
Making groove 10 to 12 mm wide x 8 mm deep in plaster of wall or in ceiling vertically or horizontally as required.
637.5
-
-
P/Applying of 2 coat of white cement Putty on wall
3462.96
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
3462.96
-
-
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
2000.7
-
-
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
1646.73
-
-
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
419.25
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and
manufacture
117.03
-
-
TUBEWELL & WATER SUPPLY LINE
-
-
-
aty vkiwfr dk;Z
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (80mm Dia)
648
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
50 to 80 mm nominal bore
75
-
-
TUBEWELL WORK:
-
-
-
Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries
required for the job. all complete as per direction of Engineer - in-charge, beyond 90 metre & up to 90 metre depth below around level
90
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge (150mm dia)
70
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (150mm dia)
20
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm. in recharge pit, in the required thickness, for all leads & lifts , all complete as per direction of Engineer -incharge
6.36
-
-
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit. over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
6.36
-
-
Supplying , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer , for all leads & lifts, all complete as per direction of Engineer -in-charge .
6.36
-
-
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
21.2
-
-
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-incharge.
1
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189. to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved
laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- incharge
32
-
-
Providing and fixing suitable size threaded mild steel cap or
1
-
-
Providing and fixing M.S. damp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (150mm dia)
4
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
2
-
-
Supply of water for boring/drilling.
10000
-
-
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge
20
-
-
P/Fixing of 20 HP Submersible pump of Crompton Make
1
-
-
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : (100mm dia)
72
-
-
Providing flanged joints to double flanged C.I./ D.I. 100 mm pipes and specials including testing of joints :
12
-
-
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
1
-
-
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.
-
-
-
Incoming 100 Amp MCCB -1 No & out going 32 Amp- 3 nos Cat B Pannel Cubicle type
1
-
-
Supply and burring of Safe Earthing Electrode T-39 Cu Copper Coated, Length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame
with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 Copper Strip will be extra). Make: As approved in U.P. P.W.D., & C.P.R.I. Certified
1
-
-
Supply & Installation of Chlorinator
1
-
-
Protection Ring cutout, electric residance rubber sheet
1
-
-
S/Installation of Submersible pump & assecceies & Panels etc
1
-
-
SEWEARGE & STP(SOAKPIT)
-
-
-
SEWER LINE:
-
-
-
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia
80
-
-
Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre)
40
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
8
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes/ DWC pipe including bed concrete as per standard design :
-
-
-
600 mm diameter S.W. pipe/ DWC pipe
120
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
1
-
-
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
3
-
-
Extra for depth for manholes :
-
-
-
Size 90x80 cm
1
-
-
Size 120x90 cm
1
-
-
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
1
-
-
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
1
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
With 20x20 mm square bar
4
-
-
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
-
-
-
300mm dia
25
-
-
450mm dia
50
-
-
600mm dia
45
-
-
SOAKPIT FOR 100 USER
-
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
-
-
-
i) 0.00 to 1.50 mtr. Depth
162
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
0.68
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
8.13
-
-
Providing & casting of RCC 1:1½:3 mix Grade in roof slab including shuttering etc.
1.5
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
0.88
-
-
P/Filling of light cinder/ 25mm to 40mm brick ballast inside the pit
13.49
-
-
Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete.
-
-
-
i) 0.00 to 1.50 mtr. Depth
84.38
-
-
Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting.
4.2
-
-
Providing & Making of Brick work in foundation in 1:6 cement coarse sand mix mortor complete
13.59
-
-
4.0cm th. 1:2:4 plain concrete floor with cement, coarse and 2cm graded approved stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement & marble dust in ration of 5:1 as per specified over and i/c 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in proporation of 1:4:8 and removing any and giving them a niform finish, i/c supply of all material & labour complete. (without base)
14.5
-
-
Providing & casting of RCC 1:1½:3 mix Grade in Plinth Beam including shuttering etc.
0.76
-
-
Providing & casting of RCC 1:1½:3 mix Grade in roof slab including shuttering etc.
2.93
-
-
Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete.
2.89
-
-
P/appying of 12 mm th. Plaster on wall inside in 1:6 cement C.sand mix mortor complete.
-
-
-
i) On Ground Floor
55.65
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
With 20x20 mm square bar
10
-
-
Providing and fixing soil, waste and vent pipes : (100mm dia for rain water)
3.5
-
-
Providing & fixing of CI Cowel
2
-
-
500mm dia C.I. Cover (midium duty) the weight of cover yto be not less then 58 kg
1
-
-
Less 5%
5
-
-
Labour Cess
1
-
-
Note: GST will be paid extra as per prevailing rules.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements