UP Jal Nigam Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

UP Jal Nigam - UPJN Tender

Works
Civil And Construction
Consultancy Services
Civil And Architectural Services
Eprocure
Opening Date4 Jan 2025
Closing Date3 Feb 2025
Tender Amount₹ 3,35,28,404 
Notes
Download

AI Insights

Class Of Bidder
... View More
Class-2 or Class-3 DSC
Bid Capacity
... View More
The bid capacity required can be determined using the formula: Assessed Available Bid Capacity = 2× A×N - B, where A is the maximum turnover during the last five financial years, N is the stipulated period of execution of the work, and B is the value of existing commitments. The available bid capacity of the bidder at the expected time of bidding must be more than the total estimated cost of the work. Additionally, for joint ventures, the minimum bid capacity of each member must be in the ratio of their stake holding, and the sum of their bid capacities must be more than or equal to the required bid capacity.
Technical Capacity
... View More
The bidder is required to have prior work experience in executing similar type of works, specifically in "Completed tested and commissioned works of Piped Water Supply Scheme & its associated infrastructure works." The experience requirements are as follows: - Three similar completed, tested and commissioned works each costing not less than 30% of the estimated cost put to tender, which is Rs. 100.58 Lacs. - Alternatively, two similar completed, tested and commissioned works each costing not less than 40% of the estimated cost put to tender, which is Rs. 134.11 Lacs. - Or, one similar completed, tested and commissioned work of aggregate cost not less than 60% of the estimated cost put to tender, which is Rs. 201.17 Lacs. The experience should be gained in the last 10 years. The bidder should have experience of work contract, including testing & commissioning successfully in the last 10 years. The percentages of similar works completed are 30%, 40%, and 60%, with corresponding values of Rs. 100.58 Lacs, Rs. 134.11 Lacs, and Rs. 201.17 Lacs, respectively.

Costs

Summary

Fire Hydrants Scheme In Nagar Nigam Jhansi Under Avasthapna Nidhi From Jda

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
COST OF RISING MAIN & BYE-PASS ARRANGEMENT COST OF FIRE HYDRANTS IN JHANSI NAGAR NIGAM

-

-

-

... More
Supply of the following sizes of D.I K-7 pipes ( red colour) with all jointing materails confirming to latest relevant I.S.8329/2000 & IS:4984:1995 or its latest amendment with couplers including complete in all respect F.O.R. destination including all taxes and insurance.

-

-

-

... More
250 mm dia D.I.K-7

196

3070

601798.4

... More
200 mm dia D.I.K-7

468

2336

1093519.44

... More
150 mm dia D.I.K-7

624

1800

1123505.76

... More
100 mm dia D.I.K-7

1517

1272

1929775.7

... More
200 mm DI K-9 CWR to OHT including Bye Pass

1000

2797

2797960

... More
Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000

-

-

-

... More
350 mm dia

1

95075

95075.9

... More
250 mm dia

1

58139

58139.94

... More
200 mm dia

2

34048

68097.64

... More
100 mm dia

2

15603

31206.78

... More
80 mm dia

5

12362

61811

... More
Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance.

-

-

-

... More
80 mm dia

11

13459

148058.57

... More
Supply of sluice valves type fire hydrant post type consisting of 80 mm dia tail pieces, 80 mm dia duck foot band S.V. painting the hydrant fixing the saddle piece molten lead incluiding caulking and standard make iron coupling with cap and chain including female coupling etc. complete to IS.369/1995 at site including all taxes.

14

17975

251653.78

... More
Excavation for pipe line in all type of rock by chieselling /blasting including supply of blasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 10 KM ( 50 % )

-

-

-

... More
In Kankar / Morum Shingle

1653.44

256

424735.67

... More
In all type of rock

2153.44

1204

2592763.29

... More
Dismantling and reinstatement of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m.

-

-

-

... More
INTERLOCKING ROAD

252.4

1136

286812.22

... More
BITUMINOUS ROAD

2167.68

2669

5786253.25

... More
C.C. ROAD

235.6

1399

329818.8

... More
Carting from the store (up to 8 Km.) the following sizes of DI pipe and HDPE pipes specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.

-

-

-

... More
250 mm dia D.I.K-7

196

142

27843.76

... More
200 mm dia D.I.K-7

1468

105

155050.16

... More
150 mm dia D.I.K-7

624

73

45976.32

... More
100 mm dia D.I.K-7

1517

47

71617.57

... More
Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000

-

-

-

... More
350 mm dia

1

6477

6477.51

... More
250 mm dia

1

3994

3994.59

... More
200 mm dia

2

2557

5114.74

... More
100 mm dia

2

1502

3005.48

... More
80 mm dia

5

1502

7513.7

... More
Carting of scour valves to the site of works lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.

-

-

-

... More
80 mm dia

1

1098

1098.24

... More
Carting of 80 mm dia flanges fire hydrant of the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.

14

1098

15375.36

... More
Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete.

-

-

-

... More
Masonry type

11

27566

303230.84

... More
Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover including fixing proprer MS box with 30 m Lead of fire Hose for Fire fighting purpose with interconnect aregment As per required site condition & as per Direction of engineer incharge.

14

13730

192226.3

... More
Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main to DMA's including supply of all labour, material, T&P etc. complete as per the details given below :- No. of DMAs - 4 Total no. of bends & Tee - 12 (considering 3 no. bends & Tee in each DMA) Qty. of concrete - 12 x 0.5 cum = 6 cum. (considering 0.5 cum concrete at each bend)

26.25

7820

205279.99

... More
Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work.

-

-

-

... More
Brick masonry in cement mortar 1:4

25

6286

157157.5

... More
12mm thick plaster in cement mortar 1:4

300

189

56742

... More
RCC M-20 (including MS work)

15

9325

139883.4

... More
Provision for crossing of Nalas (0.5m to 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain.

-

-

-

... More
0.3 - 0.5 m

1

3948

3948.84

... More
0.5 - 1.0 m

1

6087

6087.32

... More
1.0 - 1.5 m

1

6999

6999.51

... More
1.5 - 2.0 m

1

11715

11715.79

... More
Barricading of pipe line trenches by using 2 m high hard MS barricading board 2.5x2.0 M, with red flags, Glow-caution boards, diversion boards & red lights.

2132

221

473176.08

... More
Interconnection of rising main in existing water work campus with pipe 200 mm including fixing at top of the CWR slab Khanderao gate zone

1

43177

43177.5

... More
Interconnection of pipe line to fire hydrent with 80mm GI pipe 8m including all material required for work

12

19525

234309.96

... More
Construction of two coloumn piller set for gurder including all labour material t&p etc complet with gurder installation. Etc comlete

1

67165

67165

... More
Provision of shifting House Connection in Distribution main including Dismantling of Road, Supply, carting of Specials lowering them into trenches, fixing them including bailing out of water necessary labour, T&P etc. required for proper completion of works 110 mm to 250 mm pipe

209

1199

250670.42

... More
Repairing of existing Fire hydrant including Supply and fixing of the materials such as pipe , valve , bend and all special as per site requirement including Replacement of fire Hydrant as per required site condition & as per Direction Engineer In Charge.

15

28785

431775

... More
Lumpsump provision for repairing of leakage at different location in different dia and different type of of pipeline in the water supply system located in the pipe line alignment (including tee , bend , special , pipe ( Tail Piece ) and socket )

47

4226

198650.2

... More
COST OF BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD

-

-

-

... More
Provide all materials, labour T&P etc. required for proper completion of work and construct Boundary wall. At OHT Campus

76.4

7047

538431.29

... More
Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate with 1.2 m wide wicket gate.

-

-

-

... More
3.60 m wide gate with 1 m wide wicket gate

1

66582

66582.22

... More
Provide all materials, labour T&P etc. required for proper completion of work and construction of interlocking approach road in water works campous.

-

-

-

... More
At OHT Campus

45

1334

60059.7

... More
Provide all materials, labour T&P etc. required for proper completion of work including levelling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth.

-

-

-

... More
At OHT Campus

40

508

20341.6

... More
Construction of 250X250 mm size drain at W/W sites

-

-

-

... More
At OHT Campus

39.5

1401

55372.29

... More
E and M Items

-

-

-

... More
PUMPING PLANT AND ACCESSORIES FOR EXISTING CWR

-

-

-

... More
SITC of Radial / mixed flow ISI marked water filled submersible motor pump sets suitable for CWR. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034:2018 and IS 9283 guideline. The radial flow pumpset should perate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for CWR. The job includes labour part of lowering of riser pipe M.S. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect as per following specifications :-

-

-

-

... More
840 LPM / 42 Mtr. HEAD / 15 HP MOTOR (2w+1s)

3

146342

439028.82

... More
MAIN PIPING AND VALVES :- SITC of DI/DF 100mm Main piping complete of suitable size and quantity required for delivery side, bye pass arrangement and 150mm common Header upto 1 m. outside the pump house along with 150 x 100 x 150 mm DI/AF Tee (3 Nos), 150 mm DI/DF bend (03 Nos), 150 mm blind flange (01 Nos), DI/DF Pipes suitable size all necessary nuts, bolts, rubber packing, M.S Support for pipe, DI mechanical joints (04 Nos) etc. complete in all respect as per site conditions.

1

143925

143925

... More
Motor operated actuator with sluice valve :- SITC of DI/DF sluice valve with Electrically integrated actuater (Totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated suitable to SCADA operation sluice valve having body door cover of graded in cast iron to IS:210 Gr.Fg.260 body and door rings of SS ASTM A743 Gr.CF8 and bearing block of leaded tin bronze to IS:318 Gr.LTB2 hinge pin of stainless steel AISI:431.Valves generally conform to IS:5312.Flanges to be drilled as per IS:1538 Part-IV &VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0) of following sizes

-

-

-

... More
Actuator with Sluice Valve of size :- 100mm for pumps

3

119937

359812.5

... More
Actuator with Sluice Valve of size :- 150mm for common header

1

119937

119937.5

... More
Non return valve :- SITC of DI/DF Single Door/ Multi Door Non return/reflux valve conforming to IS:5312/2003(part I & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing .

-

-

-

... More
100 mm Dia

3

25410

76231.32

... More
150 mm Dia

1

38397

38397.27

... More
CE/UL Certified Electromagnetic flow meter :- SITC of CE/UL Full BorecElectromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.0 MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement ‘of IEC 60529, Accuracy : + 0.5 % M.V. velocity 0.3 to 10 m/s, Transmitter/ signa convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable.

-

-

-

... More
Size 150mm for common header

1

143925

143925

... More
ELECTRICAL ITEMS:-

-

-

-

... More
Supply & laying of 1.1KV grade XLPE insulated unarmured multi strand copper conductor cable of 3C x 10 sq.mm from control Panel to respective Motors with lugs etc. (copper conductor should be electrlytic grade copper, purity 99.97% ISI marked asper IS:1554 P-I / IS :7098 P I)

150

799

119889

... More
SITC OF MOTOR CONTROL CENTER (MCC) PANEL :- Single front, Indoor & floor mounted,cubical type Panel factory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coated dust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-GI Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION 160A, 50KA, TPN, ACB microprocessor baseed (O/C,S/C) release - 1 No , Spreader Links & Extended ROH for - 1 No, 3 Phase Digital Multifunction Meter - 1 No, Digital Voltmeter 0-500V - 1 No, Digital Ammeter 0-400A - 1 Nos, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No. OUTGOING SECTION 50 A, 50KA, TPN, MCCB microprocessor based (O/C,S/C) RELEASE - 6 No, Spreader Links & Extended ROH for MCCB - 6 Nos., 63A TPN MCCB 35KA - 2 Nos. Terminal 63A

1

402500

402500.66

... More
SITC of Air Cooled Digital soft starter suitable for the LT motor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over & Under load protection, short circuit & single phasing protection with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFF type and Start /Stop push button and Instrument Fuses, suitable to SCADA operation with RS485 Port rating capacity 15 HP / 11 KW

3

67165

201495

... More
SITC of microprocessor based three phase sensing power factor correction relay panel , IEC / EN 61000-6- (2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, communication interface with RS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR rating capacity of 21 KVAR

1

82415

82415.29

... More
SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1)

-

-

-

... More
100 Amp Rating

1

47975

47975

... More
CE/UL Certified level transmitter for CWR :- SITC of CE/UL cirtified of Radar level transmitter CE marked with following technical parameters and Interfacing with PLC panel including mounting arrangement. Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Range- 0 to …30... mtrs Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68

1

115140

115140

... More
CE/UL Certified Pressure transmitter for pumps and common header :- SITC of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel including mounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.1 % of full scale or better Enclosure- IP 68

4

47975

191900

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required according to latest IS:3043 Supplying and laying 50 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

4

28785

115140

... More
SITC of 1Ton capacity hand operated over head Travelling trolley crane suitable for travel length upto 6 Mtrs. with clear lift upto 3 M including gear type chain pulley block and geared Travelling trolley complete with all accessories .

1

191900

191900

... More
Providing & fixing of rubber mats for electrical purpose as per IS:5424-1969, plain/chequered (1mX2m) - 10mm thickness

5

2820

14104.65

... More
Providing & fixing of cable trench chequerred plate

200

172

34542

... More
SITC of Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Al strong plate and board.

2

6080

12160.7

... More
Internal & External electrification of pumping station :-

-

-

-

... More
Indoor Lighting

-

-

-

... More
Surface Mounting

-

-

-

... More
Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD 10 % , p. f.≥ 0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard

-

-

-

... More
Suspended Mounting / Surface Mounting

-

-

-

... More
36W LED light fixture 2'×2' with acrylic / prismatic front cover.

4

2502

10009.52

-

-

-

... More
Providing & Fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, Conform to all the performance requirements laid down in IS:374-2019 including all amendments, as applicable; & Carry BIS licensing (i.e. ISI marking) or Quality Certification such as ISO - 9001 or above. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc.) as required.

-

-

-

... More
1200 mm Sweep BEE 3 Star rated (service value =5.0 to 5.5 )

2

1551

3103.02

... More
Providing & Fixing of Heavy duty capacitor start, copper wind Double ball bearing 900/1400 RPM single phase Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required.

-

-

-

... More
450mm sweep (900/1400 RPM)

2

4103

8207.56

... More
Outdoor Lighting

-

-

-

... More
Supply and fixing of all in one solar LED light fixturewith integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system..

-

-

-

... More
Compact Solar LED Street Light- 60W(MONO) 18V / 12.8V 27Ah /40W

4

44014

176056.72

... More
Complete wiring of Pump house, HT & LT room with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc.

1

47975

47975

... More
AUTOMATION FOR EXISTING CWR

-

-

-

... More
CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification.

1

527725

527725

... More
GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification.

1

28785

28785

... More
CE/UL Certified Intelligent energy meters

1

23987

23987.5

... More
CE/UL Certified Surge protector for control panel

1

14392

14392.5

... More
CE/UL Certified 3 KVA UPS with batteries as per technical bid documents

1

143925

143925

... More
CE/UL Certified 7" touch screen suitable for communication with PLC/RTU for local display & control of process parameters.

1

28785

28785

... More
Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments

1

143925

143925

-

-

-

... More
(i) Complete cabling upto 3 Pumps

1

76760

76760

... More
Security Survelliance IP Camera with recorder (optional)

2

19190

38380

... More
Installation, commissioning & testing

1

19190

19190

... More
Local Control Station at Ex. CWR

-

-

-

... More
CE/UL & BIS Certified industrial grade LED Monitor 65" with latest configuration as per specification

1

230280

230280

... More
Desktop / PC with i5/i7 processor for as per technical bid documents

1

86355

86355

... More
CE/UL Certified 3 KVA UPS with batteries as per technical bid documents

1

143925

143925

... More
Full development version of required TAGS SCADA Software with customization of software for LCS as per requirement as per spec. mentioned in technical bid documents.

1

383800

383800

... More
CE/UL certified local control room PLC with redundant CPU & power supply at LCS in IP 54 enclouseras per spec. mentioned in technical bid documents.

1

527725

527725

... More
GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & received data & gather from remote sites to control station, all accessories included signal enhancer anternna along with running expenses till DLP

1

38380

38380

... More
CE/UL Certified firewall for network protection

1

172710

172710

... More
Air conditioner 1.5 ton capacity 5 star rating with automatic voltage stabilizer

1

52772

52772.5

... More
SURGE PROTECTOR FOR ETHERNET communication protection.

1

14392

14392.5

... More
Furniture for LCS room as per requirement

1

47975

47975

... More
CE/UL certified industrial grade Ethernet Swtich

1

14392

14392.5

... More
Cannon/HP or equivalent Laser printer 1018 or equivalent

1

28785

28785

... More
Security Survillance IP Camera with recorder (Optional)

1

19190

19190

... More
Installation, Commissioning & testing including required furniture, A/C etc.

1

47975

47975

... More
INSTRUMENTATION AND AUTOMATION WORKS

-

-

-

... More
Supply of Motor operated actuator with sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater with sluice valve (Totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated suitable to SCADA operation sluice valve having body door cover of graded in cast iron to IS:210 Gr.Fg.260 body and door rings of SS ASTM A743 Gr.CF8 and bearing block of leaded tin bronze to IS:318 Gr.LTB2 hinge pin of stainless steel AISI:431.Valves generally conform to IS:5312.Flanges to be drilled as per IS:1538 Part-IV &VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0) of following sizes

-

-

-

... More
250 mm dia

1

182305

182305

... More
Supply of DI mechanical joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet.

-

-

-

... More
250 mm

1

8302

8302.55

... More
Supply of CE/UL Certified level transmitter for OHT :- Supply of Radar type level transmitter with CE marked with following technical parameters and Interfacing with PLC panel including mounting arrangement. Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Range- 0 to …30... mtrs Accuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68

1

115140

115140

... More
Supply of CE/UL Certified Electromagnetic flow meter at OHT inlet :- Supply of CE/UL Full Bore Electromagnetic Flow Meter of approved make for remote places of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.0 MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement ‘of IEC 60529, Accuracy : + 0.5 % M.V. velocity 0.3 to 10 m/s, Transmitter/ signa convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel.

-

-

-

... More
250 mm

1

215887

215887.5

... More
Supply of CE/UL Certified Pressure transmitter at OHT inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel including mounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.1 % of full scale or better Enclosure- IP 68

1

47975

47975

... More
10 KVA 3/1:1 Phase Rack Mountable Easy On_x005f_x0002_Line UPS HSN/SAC Code: -85049090 , SMF BATTERIES 12V-18 AH (EP Series) HSN/SAC Code: -85072000 Battery Rack for 20 Nos 12 V-17/18 AH Batteries HSN/SAC Code: -73269099 , interlink Connector for 10 KVA UPS - 240 V DC HSN/SAC Code: -85366990

1

313756

313756.5

... More
Installation, cabling of OHT including all equipments with all power and control cable,testing and commissioning complete in all respect.

1

95950

95950

... More
AUTOMATION OF OHT

-

-

-

... More
CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification.

1

263862

263862.5

... More
GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification.

1

28785

28785

... More
CE/UL Certified Intelligent energy meters

1

23987

23987.5

... More
CE/UL Certified Surge protector for control panel

1

14392

14392.5

... More
CE/UL Certified 1 KVA UPS with batteries as per technical bid documents

1

47975

47975

... More
CE/UL Certified 7" touch screen suitable for communication with PLC/RTU for local display & control of process parameters.

1

28785

28785

... More
Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments

1

143925

143925

-

-

-

... More
(i) Complete cabling

1

76760

76760

... More
Security Survelliance IP Camera with recorder (optional)

2

19190

38380

... More
Installation, commissioning & testing

1

19190

19190



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.