UP Jal Nigam Tender

Drilling of 500mm dia bore from G.L. to 65 m BGL.

Drilling of 500mm dia bore from 65m BGL to 100m BGL.

Drilling of 500mm dia bore from 100m BGL to 165m BGL.

LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OF T.W. BY GRAVEL- Lowering of 200mmx150mm dia tube well assembly in bore hole and shrouding of pea Gravel between annular space of bore hole and T.W. assembly from G.L. to 150m BGL.

Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 60m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1 mm thick from 60m B.G.L To 100m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 150m BGL.

MATERIALS

TUBE WELL: ASSEMBLY M.S. Tubewell assembly with all required parts like plain Pipe, Slotted Pipe, Rings, well cap, Bail Plug, Clamp, Reducer, Centre Guide, Support Structure etc TW Construction Materials (150mm.dia MSERW 7.1mm thick slotted pipe, 150mm.dia MSERW 7.1mm thick plain pipe, 200X150 mm. dia M.S reducer 16.0 mm. thick, 200mm. size M.S. well cap. 12mm thick, 200mm size M.S. half thread nipple, 200 mm. size M.S. ring 100mmx12mm tihck, 150 mm. size M.S. ring 100mmx12mm tihck, 200 mm.dia size M.S. S/I clamp, Tube well supporting Frame, 150mm.dia size M.S. bail plug, 150mm Center guide, 200mm dia half thread socket) will be Provided by Department

200mm. dia size MSERW housing pipe 7.1 mm thick.

1.60mm to 4.80mm. size pea gravel of Lalkuwan quarry duly screened, washed and proper stacking at site.

Development of tube well by 250 PSI air compressor

Transportation,Installation, Dismantling of compressor including levelling & dressing of site and camp equipage (Inclding Sodium Hexametaphasphate (if Required/As instructed by Engineer In-Charge)

Development of tube well by 250 PSI air compressor.

Development of tube well by 1 cusec O.P. unit

Transportation,Installation & Dismantling of O.P. unit including levelling & dressing of site and camp equipage.

Development of tube well by 1 cusec O.P. unit.

Logging of tube well.

PUMP-SET

500 LPM, 35m head 2900rpm, 7.5 H.P. submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989) Soft control panel fabricated with 22mm tick M.S. plate dust and vermin proof having MCCB including following items. MCCB 200 amp.-1 No. Voltmeter 0-600 volt range with selector switch. -1 No. Ammeter 0-200 amp. range with selector switch-1 No. KWI meter for 7.5 H.P.-1 No. Power factor meter-1 No. Frequency meter-1 No. Hour count meter -1 No. Single phase preventer -1 No. Power capacitor of suitable capacity -1 set Phase indicting lamps with toggle switch. -1 set Instrument fuses of 10 amp. capacity. -1 set 15 amp. switch fuses unit for light and fan point -1 No. Submersible cable of suitable size -45 m. Starter : Manually operated oil immersed at auto transformer starter with suitable relay to operate the 7.5 H.P. pump set.-1 set

MAIN PIPING AND VALVES 80 mm dia 5.4mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3m long 24 m with 1m long top pipe with cap (Damdam) and sealing ring. -8 Nos. 80mm dia size CI-D/F 90 Degree bend-1 No. 80mm dia size CI-A/F Tee -1 No. 80mm dia size M.S. Distance piece 1.00m long 2 Nos. and 1.5m long 1 No. -3 Nos. M.S. enlarger/reducer of suitable size. -1 No. 80mm dia Kirlosker/IVC make Sluice Valve P.N. rating 1.0 Having following specification confirming. (As per IS - 14846-2000)-2 Nos. Non rising system with hand wheel Both end flanged With Isometric trap axial threads for smooth operation of stream. Face ring pressed in body and wedge. Wedge tarred on both sides provided with deep grooves inside. Application Handling of clear water sp. gr. 1.0 (Confirming to 15.780/I.S. 2905) 80mm dia Kirlosker/IVC makeReflux Valve- (Confirming to IS-5312 part-I) Having following specification :--1 Set Suitable for handling clear water having specific gravity and temperature up to 500. Both end flanged. Door contact on the periphery. Body: Gun Metal. Hinge pin stainless steel. Disc face: High quality mature rubber or better.

Point 2.03 Supply and installation of Electro Mechanical type Dozer set of suitable capacity working pressure 0-4 Kg/Cm2 complete with panel and 200 liter capacity syntax make tank suitable for 500 to 2000 LPM discharge of pumping plant.-1 set Power Wiring and Earthing, Internal Wiring of Pump House-1 Job Painting of pumping plant with approved anticorrosive and specified colour paint-2 coat. -1 Job TOOLS (REPUTED MAKE) IN A TOOL KIT-1 set Pipe wrenches -2 Nos. D/E spanner 22/6 mm-6 Pes. Adjustable wrench 300 mm-1 No. Screw driver - (a)   12 X 250 mm-1 No. (b)   8 X 250 mm-1 No. (c)   5 X 250 mm-1 No. Combination plier 200mm-1 No. Nose plier 200 mm-1 No. Hammer with handle 1 Kg. -1 No. Line tester (Taparia make)-1 No. GAUGES :-1 set Febrick/H Guru make Pressure gauge -1 No. Febrick/H Guru make Depth Gauge-1 No. Other necessary fitting for gauges, control cock, Air hand pump, sunmica top wooden board flexible PVC armoured 12mm airline 40m including all accessories. -1 set Misc. items such as protection ring, cutout, transformer oil, electric resistanace rubber sheet etc.-1 No. LIFTING TACKLE (REPUTED MADE)- 1 tones capacity 4.5 m lift, spur geared chain pulley block (Tested on 3 Tones.)-1 No.

Cost of additional 80mm dia 3m long M.S. flange colanm pipe.

One month watch & ward during the period of installation.