UP Jal Nigam Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Construction Material
Water Storage And Supply
Eprocure
Opening Date14 Sep 2024
Closing Date16 Oct 2024
Tender Amount₹ 17,62,26,991
Costs
EMD
₹ 18,00,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Summary
Supply Of All Materials, Labour, T&p Etc. For Construction Of Over Head Tank, Pump House, Staff Quarter, Lcs Room, Boundary Wall, Gate
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPJNM_956051_1Tender No
1436/NIVIDA/55Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
500 KL / 18.0 M Staging (ZONE-04)
1
-
5316425.25
RISING MAIN
Supply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 and D.I. S/S or flanged Specials conforming to I.S. 8329/2000 Suitable for above C.I.S/S pipe F.O.R destination from tubewell to OHT including bypass including all Taxes and insurance. complete in all respect.
-
-
-
150 mm dia K-9
1600
-
1996.91
200mm dia K-9
530
-
2688.23
Excavation for DI pipe line trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the centre of the foundation trenches.
1888.8
-
229.83
Carting from the store (up to 8 Km.) The following sizes of D.I. double K-9 pipe and specials to the site of work lowering them into trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complete but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.
-
-
-
150 mm dia K-9
1600
-
65.92
200mm dia K-9
530
-
75.67
Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends and below the Valves.
1
-
7050
DISTRIBUTION SYSTEM
Supply of the following sizes of DI K-7 & HDPE pipes(PN-6, PE-100) confirming to latest relevant I.S.Codes with DI/HDPE Specials conforming to I.S.- 8329/2000 and I.S.- 4984/2016 respectively etc complete in all respect F.O.R. destination including all taxes and insurance.
-
-
-
450 mm dia DI K-7
447
-
6687.58
400 mm dia DI K-7
239
-
5669.2
350 mm dia DI K-7
160
-
4661.36
300 mm dia DI K-7
495
-
3787.56
250 mm dia DI K-7
1352
-
2949.63
200 mm dia DI K-7
3975
-
2244.67
160 mm dia HDPE PN-6/PE100
1898
-
591.32
140 mm dia HDPE PN-6/PE100
2391
-
454.32
125 mm dia HDPE PN-6/PE100
2440
-
360.63
110 mm dia HDPE PN-6/PE100
5322
-
284.07
90 mm dia HDPE PN-6/PE100
63738
-
196.43
Supply of the following sizes of Hand Wheel operated with Sluice Valves destination including all taxes and insurance.
-
-
-
350 mm dia
2
-
168563.92
300 mm dia
3
-
87591.84
250 mm dia
3
-
66514.15
150 mm dia
2
-
24272.44
125 mm dia
1
-
23025.24
100 mm dia
1
-
18506.53
80 mm dia
7
-
9497.91
Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance. (80mm dia)
10
-
9497.91
Supply of 25 mm dia screwed down type air valve with gun metal seat at site stone including all taxes.
10
-
10169.48
Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot bend and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes.
2
-
8970.25
Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.
64962.91
-
229.83
Dismantling of following type of surface including all layers, sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m.
-
-
-
B.O.E. ROAD
9620.25
-
84.44
BITUMINOUS ROAD
4890.32
-
175.79
C.C. ROAD
6282.53
-
175
INTERLOCKING TILES ROAD
15242.18
-
121.69
Reinstatement of following type of road surface.
-
-
-
B.O.E. Road with 40% new bricks and 60%used old bricks over 30mm compacted local sand including all materials,labour,T&P etc complete
9620.25
-
291.46
Bituminous Roads with granule sub base (G1-100mm, G2-75mm, G3-75mm thick), 50mm thick bituminous macadam over priming coat and tack coat and 30mm thick SDBC/BC over tack coat & disposal of all debris and surplus earth within 8 Km. distance as per direction of Engineer-in-charge, including all materials,labour,T&P etc complete
4890.32
-
1532.93
C.C. Road will be prepared with 10 cm thick P.C.C. 1:2:4 Cement: Coarse Sand & 20 mm Stone grit over base concrete 15 cm. P.C.C. 1:4:8 with cement coarse sand & 40 mm stone ballast after compacting the earth surface properly. The C.C. surface must be compacted with surface vibrator, including all materials,labour,T&P etc complete.
6282.53
-
1194.34
Interlocking Tile road: Tiles must be of the thickness & grade similar to that of the dismantled tiles over base concrete 75 mm thick PCC 1:4:8 cement: local sand: stone ballast as per existing road. The thickness of tiles shall be same as that of existing road, including all materials,labour,T&P etc complete.
15242.18
-
629.07
Carting from the store (up to 8 Km.) the following sizes of D.I & HDPE pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complete but excluding cost of trenching but including making joints.
-
-
-
450 mm dia DI K-7
447
-
219.33
400 mm dia DI K-7
239
-
181.51
350 mm dia DI K-7
160
-
147.74
300 mm dia DI K-7
495
-
131.86
250 mm dia DI K-7
1352
-
102.09
200 mm dia DI K-7
3975
-
75.67
160 mm dia HDPE PN-6/PE100
1898
-
55.3
140 mm dia HDPE PN-6/PE100
2391
-
43
125 mm dia HDPE PN-6/PE100
2440
-
43
110 mm dia HDPE PN-6/PE100
5322
-
39.39
90 mm dia HDPE PN-6/PE100
63738
-
35.42
Carting of D/F Sluice valves of Following sizes to the site of works Lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valve and specials Required but including the testing etc. complete
-
-
-
350 mm dia
2
-
3182.68
300 mm dia
3
-
2361.75
250 mm dia
3
-
2251.56
150 mm dia
2
-
1278.2
125 mm dia
1
-
870.5
100 mm dia
1
-
813.13
80 mm dia
7
-
704.23
Carting of 80 mm dia scour valves to the site of works lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete.
10
-
704.23
Carting of 25 mm dia screwed down air valves to the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete
10
-
735.31
Carting of 80 mm dia flanges fire hydrant to the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete.
2
-
331.03
Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete.
-
-
-
Surface box type
10
-
3830
Masonry type
10
-
18330
Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
10
-
6550
Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
2
-
12800
Provision for Large crossing of nala,raod & culverts including shifting of telephone cable etc.along the alignment of pipe line including supply of C.I Tyton pipe and special and also jointing material their laying and iointing testing etc,complete.(FOR 7.0 M WIDE)
12
-
21750
Provision for Small crossing of nala,raod & culverts including shifting of telephone cable etc.along the alignment of pipe line including supply of C.I Tyton pipe and special and also jointing material their laying and jiointing testing etc,complete.(FOR 3.5 M WIDE)
20
-
10250
Pump House cum chlorinating room (3.60x3.0x3.0)m and (2.5 x 1.8x 3.00)m
-
-
-
Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches.
71.64
-
185.85
Concrete with 40 mm gauge Ist class brick ballast, coarse sand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper completion of work.
17.25
-
3936.25
Ist class brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper completion of work.
32.82
-
4894.81
150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mm stone grit 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
2.59
-
9609.35
Ist class brick work in 1:6 cement and Coarse sand mortar in super structure including supply of all materials, labour,T&P etc required for proper completion of work.
45.78
-
5244.91
M.S. Angle iron chaukhat of 40mm x 40mm size supply and fixing including simple moulding straight work as in chaukhat and also supply of all material, labour, T&P etc. required for proper completion of the work.
11.25
-
9025
Supply and fixing of 1mm thick sheet iron panelled door, windows shutter including supply and fixing and adjustment of hinges , bolts, locks, handles, springs and other fittings but excluding supply and painting of fittings.
22.5
-
3063.15
Supply and fixing of hold fast in doors and windows of size 25cm x 4cm x 9mm flat iron including their cutting and moulding and welding to required shape also including other material such as nails and screws etc. required for proper completion of the work.
72
-
85.3
R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering and shuttering supply of all materials, labour,T&P etc required for proper completion of work.
0.27
-
8501.77
R.C.C in sun shade with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing supply of all materials, labour,T&P etc required for proper completion of work.
0.33
-
9618.63
R.C.C in lintel with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
2.59
-
8493.56
R.C.C in slab with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
8.1
-
9333.48
Mild steel or Iron work in plain work such as R.C.C. Work wrought to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
13.83
-
9025
Mild steel gril in windows, wrought to required heavy/ small size form including supply of all materials,labour,T&P etc. Required for proper completion of the work.
9.63
-
9855.01
Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete.
62.19
-
52.67
Providing & lying of "Brick Coba" 12mm thick laid with M-150 class brick bat Coba 7.50 cm thick with gap of 15mm to each (As per PWD specification) including supply of all materials , labour T&P etc. required for proper completion of the work.
48.63
-
931
12 mm thick plaster with cement coarse sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work. From GL upto super structure.
549.54
-
162.3
12 mm thick plaster with cement coarse sand mortar in 1:4 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work on ceiling.
51.36
-
196.52
40 mm thick 1:2:4 plan cement concrete floor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part ist class brick ballast 40 cm gauge (1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supply material, labour,T&P etc required for proper completion of work.
54
-
539.06
Supply and fix 32 mm thick Flush door shutter including supply and fixing and adjustment of hinges,bolt,locks,handles,spring and other fittings but excluding painting and supply of fitting.
11.34
-
1340.1
Same as above but windows shutters.
16.2
-
1340.1
Supply and fixing of oxidised iron fitting of approved make for doors and windows.
21.6
-
465.15
Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
129.63
-
170.47
White washing in one coat including supply of all materials, labour, T&P etc required proper completion of work.
282.57
-
24.12
Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates.
306.12
-
57
Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work.
306.12
-
85
Same as above but over previously painted surface weather coat.
306.12
-
33
Provide and fixed RCC precast Jalies of 30 cm x 60 cm size including supply of all materials, labour, T&P etc required proper completion of work.
12
-
568.73
Supply and fixing of rolled steel Joist 150 mm x 100 mm including its painting with approved paint and also one coat of primer.
10.95
-
1484.29
Cartage & cost of earth work in filling in plinth including supply of excavated earth from distance of eight km.
62.34
-
120.86
Supply of all materials, labour, T&P etc. required for construction of 250 mm dia S.C. Drain.
105
-
1229.26
Supply of all materials, labour, T&P etc. required for the construction of stilling / Byepass chamber V notch chamber including supply of V notch etc. all complete.
3
-
30350
Rain water down pipe 100 mm dia PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.
24
-
106.21
Boundary Wall
Construction of Boundary wall 0.23 m thick and 1.5 m height above plinth level with all materials, labour T&P etc. required for proper completion of work.
230.4
-
5810
Construction of pillars as per type design including fixing of gate 3.6 m wide gate and 1.2 m wide wicket gate with all materials, labour T&P etc. required for proper completion of work.
2
-
38250
Construction of interlocking tile road with 80 mm thick M-30 grade tile over base concrete 75mm thick PCC 1:4:8, cement:local sand:stone ballast for approach road & water works campus with all materials, labour T&P etc. required for proper completion of work.
144
-
995.19
Provision for inside square drain including supply of all materials labour and T & P etc. complete.
120
-
946.37
Repairing of Existing Building Works (Staff Quarter, Pump House & Boundary Wall)
-
-
-
Ist class brick work in 1:6 cement and Coarse sand mortar in super structure, supply of all materials, labour,T&P etc required for proper completion of work.(Old Water Works Campus)
78.14
-
5245.11
12mm thick plaster with cement and coarse sand mortar in 1:6 over existing brick work minimum thickness not to be less than 12mm including supply of all materials, labour, T&P etc. required for proper completion of the work.
941.05
-
162.3
Supply & fixing of all materials, labours, T&P etc. required for making door shutters by M.S sheet 18mm gauge including supply and fixing M.S 40x40x6 mm size also including angle iron chaukhat supply & fixing of oxidized iron fittings etc. complete.
6.7
-
6692.51
Painting and varnishing all iron work one coat priming and two coat of approved paint oe varnish including supply of all material, labour, T&P etc. required for proper completion of the work
218.16
-
108.88
weather coats with approved coloring including supply of all material, labour, T&P etc. required for proper completion of the work
941.05
-
175.38
40 mm thick 1:2:4 plan cement concrete floor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part Ist class brick ballast 40 cm gauge (1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supply material, labour,T&P etc required for proper completion of work.
109.98
-
551.22
White washing in three coats including supply of all materials, labour, T&P etc required proper completion of work.
200
-
24.41
Making ferrule connection of various nominal dia of new distribution mains in different type of roads with fixing of saddle piece, service connections, fittings, and fixing of brass ferrule of 15mm size including tapping the main. Include the cost of excavation and subsequent backfill of trenchs and cost of fittings and specials, including labour charges for cutting, threading & fitting of GI pipe and specials including supply of binding materials such as safeda and teflon tape etc. Including making hole in the wall for crossing of GI pipe also repairing the same with mortar and also including crossing of drain with all labour T&Petc. complete. including material i.e.3 meter 20mm dia (OD) HDPE Pipe (12.5 kg/cm2), 2 meter 20mm (OD) GI pipe Class-B, EL-bow 20mm (OD) GI for above pipe Class -B, Clamp with Saddle, TAP/Stop Cock (Brass) 15mm, Ferrule brass HDPE 15mm with end cap (heavy duty), 20 mm dia PP-Adopter and 20 mm dia GI - Union.
-
-
-
FOR BOE ROAD
-
-
-
For 90mm to 110mm dia
1195
-
3340.99
For 125mm to 160mm dia
116
-
3400
For 180mm to 250mm dia
92
-
3450
For 300mm dia
9
-
3500
For 350mm to 500mm dia
15
-
3550
FOR CC ROAD
-
-
-
For 90mm to 110mm dia
797
-
4311.77
For 125mm to 160mm dia
78
-
4455.7
For 180mm to 250mm dia
61
-
4551.65
For 300mm dia
6
-
4647.6
For 350mm to 500mm dia
10
-
4743.55
FOR BITUMINOUS ROAD
-
-
-
For 90mm to 110mm dia
598
-
4113.94
For 125mm to 160mm dia
58
-
4700
For 180mm to 250mm dia
46
-
4750
For 300mm dia
4
-
4800
For 350mm to 500mm dia
7
-
4900
FOR INTERLOCKING TILES ROAD
-
-
-
For 90mm to 110mm dia
1859
-
3762.98
For 125mm to 160mm dia
181
-
3906.91
For 180mm to 250mm dia
143
-
4002.86
For 300mm dia
13
-
4098.81
For 350mm to 500mm dia
23
-
4194.76
FOR KACHHA ROAD
-
-
-
For 90mm to 110mm dia
2192
-
2999.61
For 125mm to 160mm dia
214
-
3050
For 180mm to 250mm dia
169
-
3100
For 300mm dia
16
-
3150
For 350mm to 500mm dia
27
-
3200
Variation in 20 mm (OD) dia HDPE Pipe w.r.t 3.0 mtr
1
-
132.18
Variation in 20 mm (OD) dia GI Pipe w.r.t 2.0 mtr
1
-
257.7
Construction of LCS/MCS Room
-
-
-
Excavation of earth in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 50m and refilling, watering, ramming of excavated earth into the space between the building and sides of foundation trenches or into the plinth and disposal of surplus earth upto the distance of 50m from the center of the foundation trenches.
28.55
-
185.85
Cement concrete with 10-12mm gauge approved stone ballast, coarse sand and cement in proportion of 1:1½:3 including supply of all materials, labour, T&P etc. required for proper completion of the work by hand for column 350mm dia 5m high including floor beam and floor slab.
13.26
-
9840.93
First class brick work with cement coarse sand in proportion 1:3 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.
28.8
-
5385.23
Same as above but in super structure 4.5m high.
27.45
-
5735.32
20mm thick damp proof coarse sand with cement and approved coarse sand 1:2 including waterproofing materials or in the proportion as specified by the manufacturers including supply of all materials, labour, T&P etc. required for proper completion of the work.
10.62
-
281.4
R.C.C. work with cement, coarse and 20mm gauge approved stone ballast in proportion 1:1½:3 in slab and wall etc. excluding supply of reinforcement and its bending (but including its fixing and binding the same with 0.50 mm thick binding wire) shuttering, centering and supply of all materials, labours T&P etc. required for proper completion of work.
-
-
-
* Lintel and sunshades
1.87
-
8501.77
* Slab
10.54
-
9333.48
Providing form work including centering, shuttering and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work in walls.
62.62
-
664
Mild Steel or iron work in plain work such as reinforced concrete brick work (when not including in all over rates) brought to required shape as necessary including bending and cutting for proper completion of work including supply of steel and its wastage.
2550
-
90.25
12mm thick plaster with cement and coarse sand mortar in 1:4 over brick work including supply of all materials, labour T&P etc. complete.
175.15
-
170.87
White wash in one coat including supply all materials, labour, T&P etc. complete.
128
-
24.12
Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates.
128
-
57
Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work.
128
-
85
Same as above but over previously painted surface weather coat.
128
-
33
Supply and fixing 40 mm thick C.P. Teak wood all paneled door and window shutter including supply and fixing of wooden cleat and stops and fitting but exculding their supply and including painting with the two coats of black Japan on all iron fitting of necessary and including fixing the glass pane with putty and board glass to be 0.6Kg. fitting with necessary screen for to be supplied by department.
7.85
-
5175.63
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with that iron diagonal 20x5mm size with top and bottom rails of iron 40x40x6mm with 38mm dia steel pulley with bolts, nuts locking arrangements stopppers, supply and painting one coat of approved red lead paint.
4.91
-
3063.15
Providing and fixing in position rolling shutters of approved make of 80x125mm gauge called rolled M.S. lotha interlocked throughout their entire length and jointed together at the end by end locks and mounted on specially designed pipe shaft with branches shade girder and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring.
4.05
-
2382
Mild steel or iron work in small size and section such as holding down bolts, holdfasts, tie rods, grating (when not included in all over al rates) wrought to required terms including suppply of steel bolts and wastage etc. their fixing.
330
-
90.25
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From site of work and including watering, dressing etc. complete.
13.62
-
965.27
Supply and fixing of exhaust fan including supply of all materials, labour, T&P etc. required for proper completion of the work.
6
-
4650
Supply and fixing of 150 mm, S.W. drain pipe including supply of all materials, labour, T&P etc. required for proper completion of the work.
8
-
332.5
Supply and fixing of 150mm dia A.C. pipe for comb including supply of all materials, labour, T&P etc. required for proper completion of the work.
18
-
428
Staff Quarter
-
-
-
Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches.
58.28
-
185.85
Concrete with 40 mm gauge Ist class brick ballast,localsand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper compltion of work.
8.34
-
3936.25
Ist class brik work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper compltion of work.
52.34
-
4894.81
150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mmm stone gritt 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
2.84
-
9618.63
Same as item no 3 but in super structure for wall up to 1 brick thick)
50.86
-
5244.91
Supply and fix 32 mm thick Flush door shutter on doors and window including supply and fixing and adjustment of hinges,bolt,locks,handles,spring and other fittings but excluding painting and supply of fitting.
29.7
-
1340.1
R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
13.18
-
9333.48
Mild steel or Iron work in plain work such as R.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
13.68
-
9025
12 mm thick plaster with cement local sand mortar in 1:4 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto supper structure.
589.9
-
170.87
Same as above but in proprtion 1:4 with cement and fine sand mortar on ceiling
70.1
-
196.52
40 mm thick 1:2:4 plan cement concrete floor with cement,coarse sand and 20 mm gauge approved stone ballast laid in penel finished with 3 mm loating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cemnet,4 part of local sand and 8 part ist class brick ballast 4 cm gauge (1:4:8) and removing any over lapping of mortar at the joist of panel if an and giving them uniform finished including supply material, labour,T&P etc required for proper compltion of work.
103.12
-
539.06
Same as above but base concrete of 1:4:8 in cement , local sand and 40mm gauge first class brick ballast etc complete.
78.92
-
168.25
B.O.E. Flooring in 1:6 cement mortar over 75 mm thick brick ballast base concrete (1:4:8) and surface painted with 1:2 in court Yard. including supply material, labour,T&P etc required for proper compltion of work.
47.78
-
535.26
Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
59.4
-
170.47
White washing in one coat including supply of all materials, labour, T&P etc required proper completion of work.
660
-
24.12
Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates.
660
-
57
Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work.
660
-
85
Same as above but over previously painted surface weather coat.
660
-
33
Rain water down pipe 100 mm dia PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.
6
-
106.21
Mild steel gril in windows, wrought to required form including supply of all materials,labour,T&P etc. Required for proper completion of the work.
12.5
-
9855.01
Construction of semi circular drain 200 mm dia including supply of all material, labour, T&P etc. complete.
15
-
1330.01
Electrification work complete.
2
-
34088.7
Sanitation work Water supply work complete.
2
-
68399.05
CONSTRUCTION OF TUBEWELL (300x200mm dia) for Zone-3
-
-
-
Transportation, Erection, Dismantling of Rig Machine and its T&P
2
-
31356.46
Transportation, Erection, Dismantling of Compressor 250/350 PSI
2
-
27173.04
Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test
2
-
43062.36
Supply of Tubewell Assembly
M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
-
-
-
300 mm dia M.S. Pipe
84
-
5168.35
200 mm dia M.S. Plain/slotted
168
-
3575.1
PEA-GRAVEL (As per IS:4097)
1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell
80
-
4797.5
Drilling of bore by rig machine As Per IS :2800(Part I & II):
-
-
-
Drilling of bore by 600 mm dia bit GL to 45 mt. BGL.
90
-
2197.26
Drilling of bore by 500 mm dia bit from 45 mt GL to 100 mt. BGL.
110
-
1851.84
Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
80
-
2168.47
Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
-
-
-
Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL
84
-
355.02
Lowering of 200 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL
116
-
239.88
Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
52
-
297.45
Development of tube well by 250 PSI air compressor and 2/3 cusec O.P. Unit to yield sand free discharge.
-
-
-
Development and testing of tube well by Air Compressor.
100
-
2782.55
Development and testing of tube Well O.P.Unit to yield sand free Discharge.
200
-
748.41
Chemical and Bacteriological
test (Analysis of water sample)
2
-
2398.75
Logging of borehole by departmental/approved electric logger
2
-
17271
CONSTRUCTION OF TUBEWELL (300x150mm dia) for Zone-4
-
-
-
Transportation, Erection, Dismantling of Rig Machine and its T&P
1
-
31356.46
Transportation, Erection, Dismantling of Compressor 250/350 PSI
1
-
27173.04
Transportation, Erection, Dismantling of 1 Cusec/ 3 Cusec O.P. Unit and Yield test
1
-
43062.36
Supply of Tubewell Assembly
M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
-
-
-
300 mm dia M.S. Pipe
42
-
5168.35
150 mm dia M.S. Plain/slotted
68
-
2694.28
PEA-GRAVEL (As per IS:4097)
1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell
36
-
4797.5
Drilling of bore by rig machine As Per IS :2800(Part I & II):
-
-
-
Drilling of bore by 600 mm dia bit GL to 48 mt. BGL.
48
-
2197.26
Drilling of bore by 500 mm dia bit from 48 mt GL to 100 mt. BGL.
52
-
1851.84
Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
20
-
2168.47
Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
-
-
-
Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL
42
-
355.02
Lowering of 200 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL
58
-
182.31
Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
10
-
230.28
Development of tube well by 250 PSI air compressor and 2/3 cusec O.P. Unit to yield sand free discharge.
-
-
-
Development and testing of tube well by Air Compressor.
40
-
2782.55
Development and testing of tube Well O.P.Unit to yield sand free Discharge.
80
-
623.68
Chemical and Bacteriological
test (Analysis of water sample)
1
-
2398.75
Logging of borehole by departmental/approved electric logger
1
-
17271
PUMPING PLANT AND Voltage STABILIZER for Zone -3
-
-
-
Supply, Installation, testing and Commissioning of 2000 lpm , 55 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
2
-
294247.95
SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves
4
-
119937.5
SITC of Soft starter for above 40 HP pumpset with RS 485 Port-400V Class for above pumpset
2
-
95950
SITC of 60 kva stabilizer for above pumpset
2
-
207252
SITC of equipments for the items as given below :
-
-
-
Pressure transmitter
2
-
47975
Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019
2
-
13385.03
Coloumn Pipe 5 mtr long
10
-
3118.38
SITC of NEW PUMPING PLANT & VOLTAGE STABILIZER for Zone-4
-
-
-
Supply, Installation, testing and Commissioning of 600 lpm ,53 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset,wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
1
-
191416.41
SITC of suitable capacity soft starter with RS485 port- 400 V Class.
1
-
67165
SITC of 100 mm dia size motor operated actuators with metal sheeted sluice valves
2
-
119937.5
SITC of 25 kva stabilizer for above
1
-
122816
SITC of equipments for the items as given below :
-
-
-
Pressure transmitter
1
-
47975
Misc. Items such as Prtection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-Sor 2019
1
-
19631.37
Coloumn Pipe 5 mtr long
5
-
2014.95
SITC OF REQUIRED E&M WORK AS GIVEN AT EXISTING TUBEWELL OF ZONE-1
-
-
-
SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
3
-
81557.5
CE/UL certifeid Actuator for existing valves
6
-
86355
CE/UL Certifeid Electromagnetic Flow Meter of suitable size
3
-
143925
SITC of suitable size stabilizer for above pumpset
3
-
168872
Pressure transmitter
3
-
47975
Internal electrification of pump house
3
-
19190
SITC OF REQUIRED E&M WORK AT EXISTING TUBEWELL OF ZONE-2
-
-
-
SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
2
-
67165
CE/UL certifeid Actuator for existing valves
4
-
86355
CE/UL Certifeid Electromagnetic Flow Meter of suitable size
2
-
143925
SITC of suitable size stabilizer for above pumpset
2
-
138168
Pressure transmitter
2
-
47975
Internal electrification of pump house
2
-
19190
SITC OF REQUIRED E&M WORK AT EXISTING TUBEWELL OF ZONE-4
-
-
-
Supply, Installation, testing and Commissioning of 600 lpm ,53 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset,wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
1
-
191416.41
SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
1
-
67165
CE/UL certifeid Actuator with metal sheeted new valves
2
-
119937.5
CE/UL Certifeid Electromagnetic Flow Meter of suitable size
1
-
143925
SITC of 25 kva stabilizer for above pumpset
1
-
122816
Pressure transmitter
1
-
47975
SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANT ZONE-1,2 & 4
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
6
-
275000
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
6
-
30000
CE/UL certifeid Intelligent Smart Energy Meter
6
-
25000
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
6
-
135000
CE/UL certifeid Surge Protecter for control panel.
6
-
15000
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
6
-
30000
Complete cabling including power cables of all equipment.
6
-
60000
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
6
-
120000
Installation, commissioning & testing trial for tubewell
6
-
10000
SITC OF SCADA /AUTOMATION WORK OF NEW PUMPING PLANT FOR ZONE 3 & 4
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
3
-
275000
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
3
-
30000
CE/UL certifeid Intelligent Smart Energy Meter
3
-
25000
CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
2
-
150000
CE/UL Certifeid Electromagnetic Flow Meter 100 mm size
1
-
134000
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
3
-
135000
CE/UL certifeid Surge Protecter for control panel.
3
-
15000
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
3
-
30000
Complete cabling including power cables of all equipment.
3
-
60000
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
3
-
120000
Installation, commissioning & testing trial for tubewell
3
-
10000
SITC OF AUTOMATIC CHLORINATION SYSTEM
-
-
-
Automatic Chlorination System compatible to SCADA system
9
-
75000
SITC OF AUTOMATION SYSTEM AT EXISTING OHT FOR ZONE 1,2 & 4
-
-
-
CE/UL certifeid Radar Type level transmitter for OHT.
3
-
120000
SITC of actuator for existing metal sheeted sluice valve
3
-
115000
CE/UL certifeid Electromagnetic Flowmeter for existing OHT outlet pipe
3
-
225000
Installation, commissioning & testing trial for OHT
3
-
10000
SITC of UPS 3 kva 1phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
3
-
128780
Lighting at Water works campus with solar panel and LED light of 1 set
3
-
30000
SITC OF AUTOMATION SYSTEM AT NEW OHT FOR ZONE 3
-
-
-
CE/UL certifeid Radar Type level transmitter for OHT.
1
-
120000
Actuator of 300 mm dia size with new metal sheeted sluice valve
1
-
215000
CE/UL certifeid Electromagnetic Flowmeter 300 mm size
1
-
260000
Installation, commissioning & testing trial for OHT
1
-
10000
SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
1
-
432330
Lighting at Water works campus with solar panel and LED light of 1 set
1
-
30000
SITC OF CHLORINE ANALYZER FOR OHT FOR ZONE 1, 2,3&4
-
-
-
Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm) b) Analyzer with RS 485 O/P
4
-
221500
TRIAL RUN OF THREE MONTHS FOR ALL ZONE
-
-
-
Three months trial run of electro mechanical work with Expenditure on hypo chloride solution,Chaukidar, watch & ward etc for whole scheme
1
-
604071.35
SITC OF ELECTRO MECHANICAL EQUIPMENTS AT LOCAL CONTROL STATION
-
-
-
CE/UL & BIS Certified industrial grade LARGE SIZE LED MONITOR with lates configuration as per specification.
1
-
233513.51
Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents.
1
-
87567.57
CE/UL Certified 3 KVA UPS with batteries as per spec mentioned in tachnical bid documents.( 1 No.For LCS and 4 Nos for tubewells which are not constructed in OHT Campus)
5
-
145945.95
Full development version of required TAGS SCADA Software with coustomization of software for LCS as per spec mentioned in tachnical bid documents.
1
-
389189.19
GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP.
1
-
38918.92
CE/UL certified Firewall for network protection.
1
-
175135.13
Surge protector for eternet communication protection.
1
-
14594.59
industrial grade Ethernet Switch.
1
-
14594.59
canon/hp Laser printer1018 or equivalent
1
-
29189.19
Installation,Commissioning ,testing including required furniture,internal wiring,PVC panelling of walls/false ceiling work and Split A/C .
1
-
48648.65
Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days
2
-
19459.46
Trial run charges for LCS for 3 months
1
-
94000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements