UP Jal Nigam Tender

ADMIN BUILDING:- Providing all labor, materials, tools, and equipment for the construction of the admin building, as per the approved design and drawings, and under the direction of the Engineer-in-Charge (E/I). The work shall be carried out in accordance with site conditions and requirements, ensuring complete and proper execution of the work.

Wetland with common wall and inlet, outlet channel (8 Channels, each 15.0 m X 8.0 m):- Providing all labor, materials, tools, and equipment for the construction of a wetland, as per the approved design and drawings, and under the direction of the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions and requirements, ensuring that the construction of the unit meets all specified parameters and achieves the desired outcomes.

Wetland media consisting of Coarse Aggregate, Round Stone and Fine Aggregate:- Providing all labor, materials, tools, and equipment for the construction of a wetland, as per the approved design and drawings, and under the direction of the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions and requirements, ensuring that the construction of the unit meets all specified parameters and achieves the desired outcomes.

Aggregate 40 mm

Sand

Round Stone

Mud mortar made with local clay good earth.

Lining HDPE Lining

Bottom

Walls

Supply of all labor, materials, tools, and equipment for planting shrubs or plants in the constructed wetland at 0.3 m center-to-center (C/C) spacing, as per the approved design and under the direction of the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions to ensure proper completion and including all necessary components.

Supply of all labor, materials, tools, and equipment for providing Polycarbonate sheet, as per Requirementsite condition and the approved design and drawings, and as directed by the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions to ensure proper completion, achieving the desired parameters, and including all necessary components.

Misc. Repair Work:- Providing all labor, materials, tools, and equipment for minor and major repair works, including the strengthening of all existing structural units, as directed by the Engineer-in-Charge (E/I). The scope of work includes epoxy painting inside all liquid-retaining structures and other necessary painting tasks for all structures to ensure proper completion in accordance with site conditions and requirements, enabling the Sewage Treatment Plant (STP) to become fully functional and achieve the desired parameters.

Paint Work:- Providing all labor, materials, tools, and equipment for Painting works on, including all existing structural unit to construced New Units as directed by the Engineer-in-Charge (E/I). The scope of work includes painting inside all liquid-retaining structures and other necessary painting tasks for all structures to ensure proper completion in accordance with site conditions and requirements, enabling Wastewater Treatment Plant to become fully functional and achieve the desired parameters.

Water Proofing work :- Providing all labor, materials, tools, and equipment for Water Proofing work works, including the strengthening of all existing structural units, as directed by the Engineer-in-Charge (E/I). The scope of work includes epoxy painting inside all liquid-retaining structures and other necessary painting tasks for all structures to ensure proper completion in accordance with site conditions and requirements, enabling the Sewage Treatment Plant (STP) to become fully functional and achieve the desired parameters.

STORM WATER DRAIN:- Supply of all labor, materials, tools, and equipment for the construction of storm water drains, as per the approved design and drawings under the direction of the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions to ensure proper completion and including all necessary components.

LABORATORY:- Supply of all labor, materials, tools, and equipment for tiling the laboratory slab (15 m x 0.8 m) along with skirting, including all internal rehabilitation works as directed by the Engineer-in-Charge (E/I). The work shall be executed as per site conditions to ensure proper completion and including all necessary components.

UV DISINFECTION:- Supply of all labor, materials, and tools & plant (T&P) for the construction and installation of the UV disinfection channel, as per the approved design and drawings, and as directed by the Engineer-in-Charge (E/I). The work shall be carried out in accordance with site conditions and requirements to ensure proper completion and achieve the desired parameters, including all necessary provisions.

Supply of all labor, materials, and tools & plant (T&P) for the construction of the Overhead Tank for the water supply facility throughout the entire premises, as directed by the Engineer-in-Charge (E/I). The work shall be executed in accordance with site conditions and specifications to ensure proper completion, including all necessary provisions.

GRASS CUTTING:- Providing all labor, materials, tools, and equipment for grass cutting and site cleaning as directed by the Engineer-in-Charge, ensuring proper completion of the work in accordance with site requirements, including all necessary measures.

ELECTRICAL, MECHANICAL, INSTRUMENTATION AND SCADA WORK (CAPEX) INCLUDING 03 MONTHS TRAIL & RUN

Rehabilitation, upgradation, Design, drawing for 3.6 MLD existing Waste water Treatment Plants (WWTP)and its asssociated SPS, based on ASP and MBBR technology consisting of supply, installation, testing and commissioning of all mechanical, Electrical, Instrumentation, PLC -SCADA system including Manual screen, mechanical fine screen with differential level sensors,belt conveyer, vortex grit removal system with conveyar & grit container, screeing container, Anoxic tank mixer, Air blowers, diffusers, recirculation & excess sludge system, UV disinfection system, filtrate pumping system, centrifuge feed pump, centrifuge, Poly dosing system, replacement of existing primary & secondary clarifier mechanized system, chlorine dosing system, automatic chlorine leak dedection & absroption system, labortary equipments, fire fighting equipments, fresh water bore well of 500 LPM with pumping plant , chlorine contact tank, MCF & ACF filters, CCTV cameras, arrangement for laboratory for measurement of various parameters of untreated and treated effluent etc. D.G. set and all other relevant equipments required for prper completion of the work. The work also includes provision for treated waste water to the drain(if required as per the site requirement) and also includes providing street lighting in campus complete in all respects as per specifications and directions of Engineer-in Charge. continue below to next row -------

part of above cell-------- In addition to this testing laboratory with equipment shall be constructed as per the specification along with Online Analyzer. and Operation and maintenance cost for STP and associated SPS, other works created under the contract for successfully completion of the work and including cost of power connections, substation of required load at SPS and STP which is also in contractor scope. The works includes 03 Months Trail & Run, defect liability period of 24 months which includes basic service charges having expenditure and expenses required to be incurred on labour, repair and / or replacement of materials, equipments, consumable items, water and all other matters and items of what so ever nature, essential and desirable to run the system satisfactory, Administration and Management, Running of Office, Comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, Consumables on Turnkey basis (This is excluding electric power cost of which shall be borne by the Authority) at Kasana Indusrial Area Gautam Buddh Nagar (Noida). Diesel for 03 Months Trail & Run include in contractor's scope. The scope of works includes replacement of all existing electromechanical equipments.The capacity and quantity of the equipments will be determined by the bidder as per CPHEOO manual to achive the desired parameters. The P&ID diagram is also submit by the bidder

Supplying, installation, testing and commissioning of energy efficient central AC Plant for buildings including Ducting work, all associated work as per approved drawing by concerned engineer incharge and direction of engineer incharge.

Supplying, installation, testing and commissioning of energy efficient LED street lighting system with GI poles for sewage pumping stations and STP campus including 02 Nos high mast lighting system each have 04 Nos. 100 watt all in one compact solar LED lights

03 years operation & Maintenance on design build and oparate (DBO) basis for STP and Associated sewage pumping stations.

1 st Year

Chlorine @ 25 Kg/day

Dewatering Ploymer @ 1.20 Kg/day

Staff & Manpower- Plant Manager, Chemist/Analyst, Mechanic/Fitter, Electrician, Helper, Gardener, Sweepers, Watchmen etc. for all shifts

Maintenance - Civil works

Maintenance - All Mechanical, Electrical, Instrumentation& SCADA Equipments at STP and associated sewage pumping stations.

2 nd Year

Chlorine @ 25 Kg/day

Dewatering Ploymer @ 1.20 Kg/day

Staff & Manpower- Plant Manager, Chemist/Analyst, Mechanic/Fitter, Electrician, Helper, Gardener, Sweepers, Watchmen etc. for all shifts

Maintenance - Civil works

Maintenance - All Mechanical, Electrical, Instrumentation& SCADA Equipments at STP and associated sewage pumping stations.

3 rd Year

Chlorine @ 25 Kg/day

Dewatering Ploymer @ 1.20 Kg/day

Staff & Manpower- Plant Manager, Chemist/Analyst, Mechanic/Fitter, Electrician, Helper, Gardener, Sweepers, Watchmen etc. for all shifts

Maintenance - All Civil works

Maintenance - All Mechanical, Electrical, Instrumentation& SCADA Equipments at STP and associated sewage pumping stations.