UP Jal Nigam Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Drainage Work
Other Consultancy Services
Consultancy Services
Civil And Architectural Services
Eprocure
Opening Date12 Mar 2025
Closing Date21 Apr 2025
Tender Amount₹ 24,67,15,298
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid Capacity = 2 x A x N - B The variables used in the formula are defined as:
A = Maximum turnover during the last five financial years (corrected to the current level of value)
N = Stipulated period of execution of the work for which the tender is invited in years
B = Value of existing commitments to be completed during the execution period of bid
Costs
EMD
₹ 24,67,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Summary
Interception And Diversion Of Drains And Stp With Co Treatment And Associated Works In Nagar Palika Parishad Sikandrabad District Bulandshahr Under Sbm U 2 Programme
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPJNM_1017002_1Bid Award Id
ViewTender No
328/NIVIDA/37 Dated 06.03.2025Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lighting system:
-
-
-
... More
200 mm dia
6
-
-
... More
Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
-
-
-
... More
02 No. incoming feeder from 01 Nos. from LT Power Supply & 01 No. from D.G. Set with following details:-
-
-
-
... More
Commissioning of all above E/M Items
1
-
-
... More
Cast iron pipes & specials.
9009
-
-
... More
Supply of Oil immersed Outdoor type Power distribution transformer 11/0.433 KV rating 160 KVA double wound with copper winding, Level-II, vector group dyn 11, ONAN with OFF LOAD tap changer operated for voltage variation + 5.0 % to - 10% at 07 tap positions in step of 2.5% along with its R.T.C.C. Panel complete with standard fitting & accessories incorporated with Marshall box for OTI,WTI & Buchholz relay etc.
2
-
-
... More
Control cable 1*10C, 1.5 mm2 PVC insulated PVC sheathed copper conductor cable for moisture sensor, level sensor, Reverse protection thermistor relay etc.(50m. For each) X 4 Nos.pumps
200
-
-
... More
Three months trail & run of IPS including diesel consumption on D.G. Set and operating staff excluding electricity.
3
-
-
... More
100 mm
1
-
-
... More
Supply of submersible sewage bottom suction non clog Pumpsets having Speed 960 RPM & Bearing insulation should be compatible for VFD operation and handling raw sewage of Sp. Gr. 1.05 with Pumpset accessories such as duck foot bend,Pedestal auto coupling with Guide rail system of SS 316 submersible pump sets comprises of guide pipe, bracket, upper guide rail holder and lifting chain with D-Sackle etc complete and Material of Construction shall be-:Casing- 2% Ni-CI with hardness ranges 220- 275 BHN approx, Impeller - Super duplex steel , Hardness 220-260 BHN.,Shaft- SS 410 with ceremic coating, hardness 700 BHN at the minimum.,Bearing- anti frictional L-10 with 60000 hours life.Operational Voltage 380±10% 3 phase AC Supply. The duties of pumpsets as follows -: (NOTE- Pump Discharge, Head & motor HP are tentative and may vary as per actual site condition at the time of execution.)
-
-
-
... More
Indoor end termination box.
6
-
-
... More
0.00 to 1.50 m. depth
11057.39
-
-
... More
COARSE SCREEN
-
-
-
... More
02 Nos. 32 Amps. MCCB for spare.
-
-
-
... More
Increase/Decrease in manhole shaft for every additional depth in following size of circular manholes.
-
-
-
... More
SCHEDULE (G-4)
-
-
-
... More
S.I.T.C. of 11 KV, T.P.M.O manually operated in double pole Structure with G.O. Switch, Double Pole Isolator(D.P.I), A.B. Switch along with all required necessary material & fittings at the outside of entry of Plant in case of isolating the Grid supply at the event of fault occurs in Substation.
1
-
-
... More
Total 03 No. incoming feeder from 02 Nos. from Transformers Incomers & 01 No. from D.G. Set with following details:-
-
-
-
... More
Installation of HT Panel.
1
-
-
... More
03.00 to 06.00 m. depth
4059.88
-
-
... More
Supply of granular material (well graded crushed rock or gravel maximum size 20mm) for class B bedding.
155.14
-
-
... More
nuts, rubber insertions etc. (the tail pieces if required will be paid
1
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
-
-
-
... More
Supply & erection of M.S. Tubular Poles SP-36, 9.5 M height.
6
-
-
... More
B.O.E road
330
-
-
... More
Earthing of H.T Panel as per IS & IER.
6
-
-
... More
Supply of 400mm dia. DI K-7 pipe and special for the pumping mains including all complete
-
-
-
... More
S/F of 72 watt LED with lumen reflector.
6
-
-
... More
Chequered plate of required size so as to cover all trenches.
1
-
-
... More
250 mm dia
4
-
-
... More
Total outgoing feeder as follows-
-
-
-
... More
1200mm internal dia., 2.30m deep
7
-
-
... More
SCHEDULE (G-2)
-
-
-
... More
1100 V grade, 3.5/4 core x 25mm2 PVC insulated PVC sheathed Aluminium Armoured conductor cable from LT panel to juction box.(1x6x50 mtr.)
300
-
-
... More
Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 14 pits for Pumps &. LT Panel. Size of earthing plate 600mm x 600mm x6 mm with salt and coal.
14
-
-
... More
Design, Drawing and Construction with Supply of all materials, Erection and Commissioning of co treatment facilities (8 MLD Sewage Treatment Plant cum 11 KLD Co-Treatment) with all the civil, electrical , mechanical, instrumentation and scada system, LT/HT panel, sub station building, DG set foundation, admin buidling, laboratories, meter room, etc. all complete for co-treatment facilities and MPS. Effluent quality shall be as per CPHEEO manual for the agricultural uses. The cost is inclusive of internal road development, water supply,sanitation, drainage and compound development etc. all complete). The cost is inclusive of MPS (average flow 19.2mld), boundary wall, MS gate of width 3.6m etc. all complete). The quality of treated effluent shall be as per CPHEEO Manual/NGT Norms for agricultural uses, which is: PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-20mg/1 (preferably 10 mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). The rate is based on SBR technology. The STP shall be able to treat the sewage and co-treatment of raw sewage having concentration level as per the CPHEEO Manual Complete in all respect and as per instructions given by Engineer Incharge.
1
-
-
... More
Design, Drawing and Construction of 1 No. IPS Average flow 9.77 MLD, Component as sump well, screen channel, common header valve chamber, cable duct, railing, L.T panel room, transformer platform, DG set platform, ISMB gurder etc. complete in all respects. All works complete as per approved drawing by competent authority including supply of all materials, labour, T&P etc. required for the proper completion of work in respect with IS code and CPHEEO manual specifications and instructions given by Engineer Incharge.
1
-
-
... More
D.G. Set
-
-
-
... More
350 mm dia for common header
1
-
-
... More
manually operated Open Channel sluice Gate in CI with gearbox, single faces rising spindle type generally conforrming to releavant IS , having frame & door fitted with St. Steel faces M.S extension rod with coupling and Guide brackets suitable to a required distance size suitable for 800x800 mm. cutout size at the inlet & outlet of screen chamber as per site requirement. (Note : Size is tentative and may vary as per actual site conditions.)
2
-
-
... More
Mannual crimping tools-
Crimping range: 400 sq.mm.,Make/ Model: Crimp well
1
-
-
... More
with bolts, nuts, rubber insertions etc. complete
-
-
-
... More
1800mm internal dia., 9.0 m deep
6.92
-
-
... More
Construction of internal road (Bituminous Road)
-
-
-
... More
00.00 - 01.50 m depth
5
-
-
... More
1100V grade, 2Rx3C x25 mm2 PVC insulated PVC sheathed submersible copper flat cable from junction box to motor. (2x4x50 mtr.)
400
-
-
... More
with bolts, nuts, rubber insertions etc. complete
-
-
-
... More
Supply of galvanized nut- Bolt SS-304 and rubber packing material for erection.
450
-
-
... More
Supply and fixing of 280x170x130 mm.size sintex junction boxes on poles.
6
-
-
... More
Pressure Guage
-
-
-
... More
Intermediate Pumping Station - IPS (Average flow- 9.77 MLD )
-
-
-
... More
150 mm dia 0-6 Kg/ sq cm. digital pressure guage with S.S. tubing stop cock and necessary fittings.
1
-
-
... More
One No frequency meter.
-
-
-
... More
Interlocking tile road
5705.54
-
-
... More
E/M work
-
-
-
... More
DC Supply
-
-
-
... More
01.50 to 03.00 m. depth
10646.58
-
-
... More
Supply and laying of 4x16mm2 Al. armoured cable.
300
-
-
... More
01 nos.Micro processor based 300A amps or suitable rating,25 KA M.C.C.B. for D.G.Set incomer with indication lamp mechanical on/off indicator.
-
-
-
... More
CIDF double flanged single/multi door swing check valves PN 1.0 having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and specifications should be as per relevant I.S.&shall be of following sizes:
-
-
-
... More
200 mm dia
6
-
-
... More
Provide and fix open timbering (covering 1/3rd surface by planks) in trenches for the depth from 0.00 to 3.00 m. below ground level consisting of 4.00 cm. thick approved country wood planks for ply boards (125 cm x 75 cm) Indian sal wood waler for depth 0.0 - 3.00 m including all labour, T&P, material etc. required for proper completion of work as per directions of engineer in charge.
-
-
-
... More
Auto phase reversal unit
-
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
-
-
-
... More
One No. Voltmeter 0-500 V with voltmeter
-
-
-
... More
06 Nos. level indicators with control cable from L.T. Panel to pumping plant for automatic level operation of pumping plants including moisture sensor and other protection for 06 Nos pumping plants.
-
-
-
... More
STP cum Co-Treatment Facilities (8 MLD STP with 11 KLD Co-Treatment )
-
-
-
... More
Pumpset -: Discharge- 91 LPS, Head- 18 mwc and electric motor of 40 HP or suitable rating
4
-
-
... More
Pump Set:
-
-
-
... More
250 mm dia
4
-
-
... More
Supply of 160 KVA silent type DG set rated capacity at 415 V +/- 6% 50 Hz A.C. Supply of 0.8 P.F lag. Self exciting alternator coupled with 1500 RPM diesel engine of suitable BHP and AC brushless SPDP alternator mounted on a common base frame and coupled through flexible coupling or closed coupled. Alternator shall be self regulated with over voltage, over speed and under voltage standard protection. Engines shall have silencer upto 10 mtr. exhaust piping, electronic/mechanical governor, manual and electric start, batteries, fueled tank with stand and piping, control panel (16G) wirh MCCB (4P, 25 KA) Ammeter, voltmeter, frequency meter, energy meter, hour meter, engine instrument panel, AVM pads and with wheather proof, powder coated Accoustic Enclosure for DG set for sound attenuation febricated from 2.0mm CRCA sheet steel structure with side wall febricated from 2.0mm CRCA sheet and filled with 100mm thick glass wool as per IS the doors of 100mm thick and febricated from 1.6mm CRCA sheet, Floor of MS chequrred Plate 5.0mm thick, canopy fixed with axial flow fan of alstom, CG, Almonard make. The enclosure has protection and Tripping of DG set against temprature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel mounted inside enclosure. The enclosure should be suitable for over mentioned capacity of DG set and Alternator.Method of cooling- water,Method of Aspirartion- Turbo Charged. As per CPCB-IV guidelines.
1
-
-
... More
do - in all kindes of soil - 100%
462
-
-
... More
Supply and laying of 1x3Cx95 mm 2 ,11 KV HT Al. Cable XLPE insulation from metering panel to H.T. Panel and from H.T. Panel to both transformers.
200
-
-
... More
Installation, testing and Commissioning of D.G. Set & AMF.Panel with Double Earthing works complete with Al. strip size 25X6mm , complete as per IS & IER.
1
-
-
... More
03.00 - 04.50 m depth
593
-
-
... More
Earthing of street light pole (SOR-41)
6
-
-
... More
H.T. Switch Gear Panel :
-
-
-
... More
Hydrulic crimping tools-
Crimping range: 16-300 sq.mm.,Weight: 6 Kg. ,Length: 500mm,Make/ Model:YQK300
1
-
-
... More
One set of current transformer of suitable ratio
-
-
-
... More
Electromagnetic type Full-Bore Flowmeter 350 mm dia shall be suitable for bi directional flow measurement. This shall be having protection category of the sensor shall be IP68 and protection category for the transmitter shall be IP- 65. Accuracy shall be of +/- 5% of measured value without being affected by variation in the line pressure. Equipment should be complete with converter, transmitting device and should be fully programmable with digital flow indicator & integrator etc. The sensor housing and junction box should be of SS 316. complete with control cable and display with application in Sewage .
1
-
-
... More
with bolts, nuts, rubber insertions etc. complete
-
-
-
... More
nuts, rubber insertions etc. (the tail pieces if required will be paid
1
-
-
... More
Concrete road
43.63
-
-
... More
nuts, rubber insertions etc. (the tail pieces if required will be paid
1
-
-
... More
Interlocking tile Road
515.5
-
-
... More
200 mm dia
6
-
-
... More
Supply of 500mm dia. DI K-7 pipe and special for the pumping mains including all complete
-
-
-
... More
E.O.T. crane of 3 Tonne capacity along with gantry girders, chain pulley block and geared trolley suitable for 10 m span 16m clear lift complete in all respect for pump house.
1
-
-
... More
Supply of 1500 Ltr. Capacity cesspool vehicle (sewer suction machine mounted) complete in all respect.
1
-
-
... More
Chain wrench (12"x18", make Taparia) Pipe wrench (1200mm, make Taparia)
1
-
-
... More
3 O/C + 1 EF IDMT Characteristics Relays based Incommer control panel equiped with over current & earth fault relay with core balance C.T., master trip relay, instantaneous under voltage realy & Auxilliary realy etc. C.T.ratio 50-40/5A Dual core, Class-1 for measurement core & 5P10 for protection core & PT 11KV/110 VAC. KWH meter, power factor meter, frequency meter. Amp. meter 0-50 & volt meter 0 to12 KV. All relays required separately conventioal type 24 to 30 VDC, 110 VAC.
-
-
-
... More
Supply of galvanized nut- Bolt SS-304 and rubber packing material for erection.
504
-
-
... More
Pipes conforming to IS : 8329 - 500 mm
40
-
-
... More
MS gate (3.6m wide gate with wicket gate)
-
-
-
... More
Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying.
1913
-
-
... More
Rising Main Form IPS
-
-
-
... More
Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
04 nos. 100A MCCB of 65KA capacity with indication lamp mechanical on/off indicator for 04 nos. pumps.
-
-
-
... More
12 mm thick rubber mating for safe working on.
6
-
-
... More
Tapping Arragement
-
-
-
... More
Manually operated CIDF Rising spindle type Sluice valve with integral starter & gearbox PN 1.0 having body door, dome gland in graded cast iron, four faces and spindle nut of Bronze LTB 2 Spindle of St. Steel 410 and specifications should be as per relevant I.S. of following sizes.
-
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality
-
-
-
... More
SCHEDULE (G-1)
-
-
-
... More
Incommer Feeder- 01 No.
-
-
-
... More
Painting of street light (P5-634)
6
-
-
... More
Filling Granual material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding including watering compaction, labour T&P etc. for proper completion of work.
-
-
-
... More
L.T. Panel Board Conforming to IEC-61439
-
-
-
... More
150 mm dia 0-6 Kg/ sq cm. digital pressure guage with S.S. tubing stop cock and necessary fittings.
1
-
-
... More
Interception and Diversion (I&D) Sewer (600mm-1000mm RCC NP-3 Hume pipes)
-
-
-
... More
1000 mm dia R.C.C. NP3 Hume pipe
-
-
-
... More
Supply & Fixing of fencing & iron mesh etc. complete in all respect.
1
-
-
... More
Chain wrench (12"x18", make Taparia) Pipe wrench (1200mm, make Taparia)
1
-
-
... More
Dismantling of roads for laying of sewer line including sorting out and stacking of serviciable materials, and diposal of unserviciable materials upto a distance of 60m and its reinstatement after filling and proper compaction of trenches including all labour T&P etc. complete required for the proper completion of the work as per direction of Engineer in Charge. If any Utilities(along or across) are damaged during this work (such as telephone cables, electric cables, gas pipelines, water house connection, internet/fibre optic cable etc.), it will be repaired by the contractor at his own cost. No extra payment will be paid for this work. All charges are included in this item.
-
-
-
... More
B.O.E road
3025
-
-
... More
1500mm internal dia., 4.95m deep
117
-
-
... More
Design, Drawing and Construction of 1 No. MPS Average flow 19.20 MLD, Component as sump well, screen channel, common header valve chamber, cable duct, railing, L.T panel room, transformer platform, DG set platform, ISMB gurder etc. complete in all respects. All works complete as per approved drawing by competent authority including supply of all materials, labour, T&P etc. required for the proper completion of work in respect with IS code and CPHEEO manual specifications and instructions given by Engineer Incharge.
1
-
-
... More
100 mm
3
-
-
... More
Mild Steel or reinforcement work in RCC required to proper shape including bending and binding for proper completion of work with supply and wastege etc.
2053
-
-
... More
S/F 1200 mm ceiling Fan for LT Room
1
-
-
... More
Provision for laying of sewer by trenchless technology
-
-
-
... More
250 mm dia
4
-
-
... More
350 mm dia for common header
1
-
-
... More
04.50 - 06.00 m depth
46
-
-
... More
Tong tester (AC/DC-1000A, make-Rishabh)
Multimeter (AC/DC-1000A, make-Meco)
Megger (AC/DC-500V make-Rishabh)
Screwdriver (6"x 12", make- Taparia)
Plier (250mm, make-Taparia)
1
-
-
... More
1200mm internal dia., 2.30m deep
3.4
-
-
... More
Providing laying PCC in following proprotions in foundation and floor including supply of all material, labour T&P and etc. required for proper completion of work 1/:4:8 with coarse sand and 40 mm gauge stone ballast
13
-
-
... More
Tong tester (AC/DC-1000A, make-Rishabh)
Multimeter (AC/DC-1000A, make-Meco)
Megger (AC/DC-500V make-Rishabh)
Screwdriver (6"x 12", make- Taparia)
Plier (250mm, make-Taparia)
1
-
-
... More
04.50 - 06.00 m depth
468
-
-
... More
Supply and installation of DCP type of 5 Kg. Fire existinguisher(PS-1132)
6
-
-
... More
Bituminous road
2120.61
-
-
... More
One Nos. 63 Amps. MCCB as Misc. load
-
-
-
... More
0.0 to 1.5 mtr. Depth
-
-
-
... More
Sluice valve, Air valve chambers
2
-
-
... More
Mechanical SS 316 coarse screen 6.00 x 1.0 meter size having spacing 20 mm, thickness 10 mm with conveyor system driven by motor , Dead plate 4mm thick, chain sprocket SS 316 , Ultrasonic type differential level sensor, Control Panel Coarse bar screen and Belt conveyor 600x2000mm or as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
One No. Voltmeter 0-500 V with voltmeter
-
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality
-
-
-
... More
Pipes conforming to IS : 8329 - 400 mm
330
-
-
... More
25 HP or suitable to above pump set
6
-
-
... More
Reflex Valve
-
-
-
... More
01 nos.Micro processor based 2000A,4P,EDO, 50 KA, A.C.B. for Incoming LT supply incomer coming from common LT distribution Panel for STP+MPS with indication lamp mechanical on/off indicator.
-
-
-
... More
Construction of Boundary wall 1.8m ht. above plinth level with RCC column @3m c/c with plinth beam and foundation avg. 1.2m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and paiting (apex painting 3 coat) as per type design and dwaing at the STP site.
-
-
-
... More
Internal electrification with fixtures.
1
-
-
... More
Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
COARSE SCREEN
-
-
-
... More
Automatic Power Factor Correction (APFC) Panel of required 50 KVAr rating with APFC Relay in 14 Steps and correcting power factor from 0.8 to 0.99 (close to unity) suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern complete.
1
-
-
... More
01.50 - 03.00 m depth
120
-
-
... More
03.00 - 04.50 m depth
167
-
-
... More
One No Surge arrestor Relay & One no. UV/OV Relay
-
-
-
... More
Feeder pillar for lighting
1
-
-
... More
Commissioning of all above E/M Items
1
-
-
... More
12 mm thick rubber mating for safe working on.
6
-
-
... More
03.00 to 04.50 m. depth
7482.49
-
-
... More
Construction/Strengthening Drain
-
-
-
... More
Supply and installation of DCP type of 5 Kg. Fire existinguisher(PS-1132)
6
-
-
... More
800 mm dia depth
1833
-
-
... More
C.I. SLUICE GATES:
-
-
-
... More
Al. junction box in SS304, IP65 with instruments for pumps with Busbar.
4
-
-
... More
S/F of 72 watt LED with lumen reflector.
6
-
-
... More
Outgoing Feeder- 02 Nos.
-
-
-
... More
One set of current transformer of suitable ratio
-
-
-
... More
800 mm dia MS pipe
90
-
-
... More
E/M EQUIPMENTS AT PUMPING STATION & SUBSTATION FOR MPS
-
-
-
... More
1100 V grade, 3.5Cx400mm2 , XLPE insulated Aluminium Armoured conductor cable from Common LT distribution panel to MPS LT Panel.
150
-
-
... More
02 Nos. 32 Amps. MCCB with auto operation & for APFC Panel.
-
-
-
... More
Feeder pillar for lighting
1
-
-
... More
350 mm dia for common header
1
-
-
... More
Supply and fixing of 280x170x130 mm.size sintex junction boxes on poles.
6
-
-
... More
Supply and laying of 1100 voltage grade,1x3.5Cx120 mm2 Aluminium conductor, XLPE armoured cable from transformer to LT Panel.
240
-
-
... More
Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, with cast insitu RCC slab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10 shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. (Refer 10.4 for Unit Cost Estimate)
-
-
-
... More
One Nos. 63 Amps. MCCB for lighting.
-
-
-
... More
01 Nos. 63 Amps. MCCB as Misc. load
-
-
-
... More
02 Nos. 32 Amps. MCCB for spare.
-
-
-
... More
Sewage Pumping Station - MPS (Average flow- 19.20 MLD )
-
-
-
... More
Duty of Each Pumpset-: Discharge- 55 LPS, Head- 18 mwc and electric motor of 25 HP or suitable rating
6
-
-
... More
Cartage of excavated earth from site to the place as directed by engineer in charge and carring back for filling of treches after laying and jointing the pipes.
178.6
-
-
... More
Testing & Commissioning of HT Panel etc.
1
-
-
... More
CIDF double flanged single/multi door swing check valves PN 1.0 having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and specifications should be as per relevant I.S.&shall be of following sizes:
-
-
-
... More
Installation , testing and Commissioning of Transformer complete.
2
-
-
... More
Reflex Valve
-
-
-
... More
Supply of MS pipe (As per IS:3589 made from steel confirming to IS:2062), with anti corrosive treatment with P.U. coating
-
-
-
... More
SCHEDULE (G-3)
-
-
-
... More
do - in all kinds of soil - 100%
66
-
-
... More
Cast iron pipes & specials.
10084
-
-
... More
Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for plyboard 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour,T&P, material etc. required for proper completion of work as per directions of engineer in charge.
-
-
-
... More
Three months trail & run of MPS including diesel consumption on D.G. Set and operating staff excluding electricity.
3
-
-
... More
Excavation for following depth below ground level for laying of sewer line in ordinary soil including cutting of joints pits, triming, dressing, leveling, refilling of trenches in 20 cm layer (at a time), repair of water line/connections damaged during work,including protective balli arrengments, caution tape,Reflective signs etc complete in all respect.If any Utilities(along or across) are damaged during this work (such as telephone cables, electric cables, gas pipelines, water pipeline, water house connection, internet/fibre optic cable etc.), it will be repaired by the contractor at his own cost. No extra payment will be paid for this work.All charges are included in this item.
-
-
-
... More
RCC NP3 Pipe
-
-
-
... More
Al. junction box in SS304, IP65 with instruments for pumps with Busbar.
6
-
-
... More
E/M EQUIPMENTS AT PUMPING STATION & SUBSTATION FOR IPS-1
-
-
-
... More
Supply of 12 KV, H.T. V.C.B. Panel with one incoming & two out going ,630Amp. (25 KA) Rating have followings-
1
-
-
... More
C.I. SLUICE GATES:
-
-
-
... More
600mm dia R.C.C. NP3 Hume pipe
-
-
-
... More
Disposal of Surplus Earth in municiple limit upto a distance of 8 km as per direction of engineer incharge
7262
-
-
... More
Carting of 500mm dia DI K-7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc.
40
-
-
... More
Lighting system:
-
-
-
... More
350 mm dia for common header
1
-
-
... More
Total outgoing feeder as follows-
-
-
-
... More
Outgoing feeder control panel equiped with triple pole 3 O/C + 1 E/F relay with IDMT & intantaneous characteristics, mater trip relay & Auxilliary relay for Buchhloz alarm / trip, OTI alram / trip & WTI alram/trip, etc. C.T.ratio 50-40/5A, Class-1 for measurement core & 5P10 for protection core.
-
-
-
... More
Supply of following sizes of R.C.C. non pressure pipes as follows with rubber gasket and other specials required including all taxes (except GST) including carriage, storing, stacking of pipes at store etc required for proper completion of work including all labour, T&P, material etc all complete in all respect for proper completion of work.
-
-
-
... More
Manual S.S.316 bar coarse screen 1.50 x 1.20 meter size having spacing 20 mm , thickness 10 mm as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
Treated Effluent Pipe:STP to Disposal Point
-
-
-
... More
Supply of 125 KVA silent type DG set rated capacity at 415 V +/- 6% 50 Hz A.C. Supply of 0.8 P.F lag. Self exciting alternator coupled with 1500 RPM diesel engine of suitable BHP and AC brushless SPDP alternator mounted on a common base frame and coupled through flexible coupling or closed coupled. Alternator shall be self regulated with over voltage, over speed and under voltage standard protection. Engines shall have silencer upto 10 mtr. exhaust piping, electronic/mechanical governor, manual and electric start, batteries, fueled tank with stand and piping, control panel (16G) wirh MCCB (4P, 25 KA) Ammeter, voltmeter, frequency meter, energy meter, hour meter, engine instrument panel, AVM pads and with wheather proof, powder coated Accoustic Enclosure for DG set for sound attenuation febricated from 2.0mm CRCA sheet steel structure with side wall febricated from 2.0mm CRCA sheet and filled with 100mm thick glass wool as per IS the doors of 100mm thick and febricated from 1.6mm CRCA sheet, Floor of MS chequrred Plate 5.0mm thick, canopy fixed with axial flow fan of alstom, CG, Almonard make. The enclosure has protection and Tripping of DG set against temprature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel mounted inside enclosure. The enclosure should be suitable for over mentioned capacity of DG set and Alternator.Method of cooling- water,Method of Aspirartion- Turbo Charged. As per CPCB-IV guidelines.
1
-
-
... More
Interlocking tile Road
515.5
-
-
... More
VFD Starter Control Panel with push button suitable for operation on 415V ±6% ,3 phase, 50 Hz, AC supply with all necessary switchgears, controlgears and protections along with automatic power factor correction feature and also compatible to PLC based SCADA Automation operation and suitable to followings motor.
-
-
-
... More
Power and control cables
-
-
-
... More
1100 V grade, 3.5 core x35mm2 PVC insulated PVC sheathed Aluminium Armoured conductor cable from LT panel to juction box.(1x4x50 mtr.)
200
-
-
... More
Bituminous road
2120.61
-
-
... More
L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of suitable amps. Capacity. Aluminium Bus Bar size of requisite size and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following.
1
-
-
... More
100 mm
1
-
-
... More
Supply and laying of 1100 voltage grade,1x3.5Cx120 mm2 Al. conductor, XLPE insulation , armoured cable from DG terminal to DG Panel & from DG Panel to LT Panel.
240
-
-
... More
0.00 to 03.00 m. depth
404.93
-
-
... More
Sluice valve, Air valve chambers
4
-
-
... More
Mechanical SS 316 coarse screen 6.00 x 1.20 meter size having spacing 20 mm, thickness 10 mm with conveyor system driven by motor , Dead plate 4mm thick, chain sprocket SS 316 , Ultrasonic type differential level sensor, Control Panel Coarse bar screen and Belt conveyor 600x2000mm or as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts,
-
-
-
... More
01.50 - 03.00 m depth
314
-
-
... More
Carting of 500mm dia DI K-7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc.
2750
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality
-
-
-
... More
PumpSet:
-
-
-
... More
One No power factor meter 0.5 lag/ 1-0.5 lead
-
-
-
... More
Interlocking tile road
5705.54
-
-
... More
E.O.T. crane of 3 Tonne capacity along with gantry girders, chain pulley block and geared trolley suitable for 10 m span 16m clear lift complete in all respect for pump house.
1
-
-
... More
Supply & erection of M.S. Tubular Poles SP-36, 9.5 M height.
6
-
-
... More
Painting of street light (P5-634)
6
-
-
... More
Power and control cables
-
-
-
... More
Sluice valve, Air valve chambers
1
-
-
... More
D.G. Set
-
-
-
... More
S/F of XLPE cable End termination box of 120mm2 :
-
-
-
... More
02 nos.Micro processor based 320A,4P,50 KA, MCCB for Transformers supply incomer with indication lamp mechanical on/off indicator.
-
-
-
... More
1800mm internal dia., 9.0 m deep
2
-
-
... More
600 mm dia depth
718
-
-
... More
Ammeter with selector switch.
-
-
-
... More
02 Nos. 32 Amps. MCCB with auto operation & for APFC Panel.
-
-
-
... More
Sets of timer and relays for overload and underload.
-
-
-
... More
Excavation below G.L. upto depth as specified for laying sewer and manhole in any type of ordinary soil (earth, sand, loam and clay with kankar) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer with watering& ramming of excavated earth into the space between the building and the sides of the foundation or into the plinth and disposal of surplus earth upto a distance.
-
-
-
... More
1500mm internal dia., junction Manhole.
1
-
-
... More
Supply & Fixing of fencing and iron mesh etc. complete in all respect.
1
-
-
... More
01 nos.Micro processor based 320A,4P, 50 KA, MCCB for D.G.Set incomer with indication lamp mechanical on/off indicator.
-
-
-
... More
Pipes conforming to IS : 8329 - 500 mm
2750
-
-
... More
04.50 to 06.00 m. depth
3561.78
-
-
... More
S/F 1200 mm ceiling Fan for LT Room
1
-
-
... More
S/F of exhaust Fan for LT Room.& Other rooms.
6
-
-
... More
One No Surge arrestor Relay & One no. UV/OV Relay
-
-
-
... More
700 mm dia R.C.C. NP3 Hume pipe
-
-
-
... More
Outfall structure with 1 gate (Size 1.0m x 1.06m) across the Drain and 1 gate at the diversion pipe inlet) including excavation , providing laying PCC, Ist Class Brick Work, 12 mm thick Plaster, RCC work in 1:1.5:3 proportion , Mild Steel Iron Work, Nala Diversion, Providing & Fixing Precast RCC manhole cover and Frame , Hand operated cast iron single phases Weir Gate , manual coarse bar screen etc. and also including supply of all materials , labour, T&P etc. required for the proper completion of work.
3
-
-
... More
Trial & Run of E/M Works at IPS
-
-
-
... More
06 nos. 100A MCCB of 25KA capacity with indication lamp mechanical on/off indicator for pumps.
-
-
-
... More
40 HP or suitable to above Pumpset.
4
-
-
... More
Trial & Run of E/M Works at MPS
-
-
-
... More
Installation of pump sets, VFD starter, sluice valve, reflux valve, cast iron pipes & speccial, dismental joints, Sluice gate, Screen, E.O.T, Pressure guage, LT Panel, Flow meter, APFC Panel and Power & control cable with all required materials & fittings with labour.
1
-
-
... More
VFD Starter Control Panel with push button suitable for operation on 415V ±6% ,3 phase, 50 Hz, AC supply with all necessary switchgears, controlgears and protections along with automatic power factor correction feature and also compatible to PLC based SCADA Automation operation and suitable to followings motor.
-
-
-
... More
One No. CT operated ammeter suitable ampere rating with ammeter
-
-
-
... More
Installation of product pipe by HDD method including preparing and setting up the plants and equipment, Preparing new pipe work material, installation new pipe-work and commissioning system or making the system ready for commissioning by HDD operation including, all related civil and mechenical works like excavation, shoring/strutting, etc. drilling, stringing, reaming, and pulling back the new pip-work on the design bore path alignment, proper disposal of drilling fluid, and back fill of site after completion all inclusive as per indSTT:101:2018: Code of prectice of HDD Technique Suiting Indian Conditions. (depth up to 6m. (IndSTT SOR:2023)
-
-
-
... More
Sluice valve
-
-
-
... More
(d) 04.50 to 06.00 m. depth
580.94
-
-
... More
Moisture sensor and other protection for 04 Nos pumping plants.
-
-
-
... More
Supply and laying of unarmoured cable 6 mm2 core Flat PVC insulated for connection of LED to junction boxes.
130
-
-
... More
Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
CI Dismantling joints
-
-
-
... More
L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of 400 amps. Capacity. Aluminium Bus Bar of requisite size and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following.
1
-
-
... More
Carting of 400mm dia DI K-7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc.
330
-
-
... More
Pressure Guage
-
-
-
... More
Supply of 500mm dia. DI K-7 pipe and special for the pumping mains including all complete
-
-
-
... More
Supply of Auto Mains Failure Panel (AMF) fabricated from CRCA sheet steel 2mm thick power coated finished, start and stop commands, control relays, selectors switch for ammeter and voltmeter, timers, hooter, visual and alarm indication for faults, UPS, operator inter face panel complete in all respect suitable for above DG sets.
1
-
-
... More
Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, with cast insitu RCC slab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10 shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. (Refer 10.4 for Unit Cost Estimate)
-
-
-
... More
Single phasing preventer.
-
-
-
... More
Testing of all above E/M Items at O.E.M. Place.
1
-
-
... More
SICT battery bank, exide make, consisting of 16 cells, 2 volt each for supply VDC 24 to 30 Volt with battery charger of approved make with suitable M.S. Stand / Trolley, equipment fittings with accessories etc.
-
-
-
... More
0.0 to 1.5 mtr. Depth
-
-
-
... More
CE & UL certified Hydrostatic type level transmitter for 4 no IPS pump.
1
-
-
... More
04.50 - 06.00 m depth
1176
-
-
... More
EARTHING
-
-
-
... More
Internal electrification with fixtures.
1
-
-
... More
Installation and testing of D.G. Set & AMF Panel with Double Earthing works complete with Al. strip size 25X6mm , complete as per IS & IER.
1
-
-
... More
Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, with cast insitu RCC slab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10 shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. (Refer 10.4 for Unit Cost Estimate)
-
-
-
... More
RCC works in1:1.5:3 cement ,coarse sand and 20 mm graded stone agregate excluding supply of reinforcement and its bending but including its fixing and binding with binding wire (to be supplied by the contractor) and including necessary centering and suttering suppy of all materials, Labour ,T&P etc. required for proper complection of work.
55.5
-
-
... More
Installation of pump sets, VFD starter, sluice valve, reflux valve, cast iron pipes & speccial, dismental joints, Sluice gate, Screen, E.O.T, Pressure guage, LT Panel, Flow meter, APFC Panel and Power & control cable with all required materials & fittings with labour.
1
-
-
... More
S/F of exhaust Fan for LT Room.& Other rooms.
6
-
-
... More
Supply and laying of 1100 voltage grade,1x3.5Cx120 mm2 Al. conductor, XLPE insulation , armoured cable from DG terminal to DG.Panel & from DG Panel to LT Panel.
100
-
-
... More
800 mm dia pipe, 10mm Pipe Wall Thickness
90
-
-
... More
Manually Operated CIDF Rising spindle type Sluice valve with integral starter & gearbox PN 1.0 having body door, dome gland in graded cast iron, four faces and spindle nut of Bronze LTB 2 Spindle of St. Steel 410 and specifications should be as per relevant I.S. of following sizes.
-
-
-
... More
Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work as per direction of Engineer in charge.
-
-
-
... More
Rising Main For MPS
-
-
-
... More
Carting,laying & jointing of following sizes of pipes including transportation, loading and unloading R.C.C. non pressure pipes class NP3 and NP4 socket/spigot rubber ring jointing and specials from store to the site of work lowering the same into trenches in the following depth below ground level, true to alignment, caulking the joints with necessary open yarn soaked wherever required as per site condition.If any Utilities(along or across) are damaged during this work (such as telephone cables, electric cables, gas pipelines, water house connection, internet/fibre optic cable etc.), it will be repaired by the contractor at his own cost. No extra payment will be paid for this work. All charges are included in this item.
-
-
-
... More
Supply and laying of 4x16mm2 Al. armoured cable.
300
-
-
... More
Single phasing preventer.
-
-
-
... More
Earthing of street light pole (SOR-41)
6
-
-
... More
Power Distribution Transformer :
-
-
-
... More
Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including sorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m including supply of all material, labour T&P etc. complete required for the proper completion of the work as per direction of Engineer in Charge.
-
-
-
... More
Construction of circular type manhole with extra heavy duty manhole frame & cover/ top slab made of reinforced cement concrete 1:1.5:3 with graded granite stone aggregate (12mm nominal size), PCC in proprtion of 1:4:8 (cement :coarse sand: graded stone aggregate other than granite 40mm nominal size) in base , Construction of base concrete in proportion of 1:2:4 (cement :coarse sand: graded granite stone aggregate 40mm nominal size) over PCC, brick masonary walls (minimum thickness of MH wall should be 35 cm) construction using 1st Class bricks having crushing strength between 100 to 150 kg/cm2 in cement mortar 1:4 (1 cement :4 coarse sand),inside plastering 20 mm thick 1:3 (1 cement : 3 coarse sand) finish smooth with neat cement and outerside plaster 12 mm in cement mortar 1:3 (1 cement :3 coarse sand). Making channels with cement concrete 1:2:4 (1 cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size, depth of channel/qunitee as per CPHEEO mannual).finished with floating coat of neat cement.This item also includes supply & fixing of ISI marked heavy duty foot rest at specified interval, necessary excavation & compacted refilling, timbering/shoring, barricading, disposal of surplus earth etc required for proper completion of work with all material, labour,T&P etc all complete in all respect as per approved design & drawing, as per specifications and as per directions of engineer in charge. If any Utilities(along or across) are damaged during this work (such as telephone cables, electric cables, gas pipelines, water house connection,internet/fibre optic cable etc.), it will be repaired by the contractor at his own cost. No extra payment will be paid for this work.All charges are included in this item.
-
-
-
... More
Testing of all above E/M Items at O.E.M. Place.
1
-
-
... More
02 Nos. 63 Amps. MCCB for lighting.
-
-
-
... More
0.00 to 03.00 m. depth
3938.62
-
-
... More
CI Dismantling joints
-
-
-
... More
Chequered plate of required size so as to cover all trenches.
1
-
-
... More
Supply and laying of unarmoured cable 6 mm2 core Flat PVC insulated for connection of LED to junction boxes.
130
-
-
... More
Ammeter with selector switch.
-
-
-
... More
Manual S.S.316 bar coarse screen 1.25 x 0.6 meter size having spacing 20 mm , thickness 10 mm as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
0.0-1.5m BGL
168.5
-
-
... More
Tools
-
-
-
... More
One No power factor meter 0.5 lag/ 1-0.5 lead
-
-
-
... More
1000 mm dia depth
46
-
-
... More
Hydrulic crimping tools-
Crimping range: 16-300 sq.mm.,Weight: 6 Kg. ,Length: 500mm,Make/ Model:YQK300
1
-
-
... More
B.O.E road
330
-
-
... More
L.T. Panel Board Conforming to IEC-61439
-
-
-
... More
Supply of Auto Mains Failure Panel (AMF) fabricated from CRCA sheet steel 2mm thick power coated finished, start and stop commands, control relays, selectors switch for ammeter and voltmeter, timers, hooter, visual and alarm indication for faults, UPS, operator inter face panel complete in all respect suitable for above DG sets.
1
-
-
... More
Cost of external water supply, electrification and sanitation work
-
-
-
... More
Manually operated Open Channel sluice Gate in CI with gearbox, single faces rising spindle type generally conforrming to releavant IS , having frame & door fitted with St. Steel faces M.S extension rod with coupling and Guide brackets suitable to a required distance size suitable for 900x900 mm. cutout size at the inlet & outlet of screen chamber as per site requirement. (Note : Size is tentative and may vary as per actual site conditions.)
2
-
-
... More
Sluice valve
-
-
-
... More
Concrete road
43.63
-
-
... More
Double Earthing of Transformers consisting of 04 nos. Earthing Pit (two for each neutral and body) with Al/GI. strip size 25X6mm, the minimum distance between to earthing pits, Double Earthing works and all electrical equipments shall be as per IS and IER.
8
-
-
... More
1500mm internal dia., 4.95m deep
148.35
-
-
... More
do - in all kinds of soil - 100%
4537.5
-
-
... More
Dismantling/cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
-
-
-
... More
B.O.E road
3025
-
-
... More
Commissioning of D.G. Set etc. complete in all respect.
1
-
-
... More
Dismantling/cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
-
-
-
... More
manually operated Thimble Mounted CI Sluice Gates of rising spindle type with gearbox, suitable for 1000mm. dia incoming sewer as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
(b) 01.50 to 03.00 m. depth
155.14
-
-
... More
Electromagnetic type Full-Bore Flowmeter 350 mm dia shall be suitable for bi directional flow measurement. This shall be having protection category of the sensor shall be IP68 and protection category for the transmitter shall be IP- 65. Accuracy shall be of +/- 5% of measured value without being affected by variation in the line pressure. Equipment should be complete with converter, transmitting device and should be fully programmable with digital flow indicator & integrator etc. The sensor housing and junction box should be of SS 316. complete with control cable and display with application in Sewage .
1
-
-
... More
800 mm dia R.C.C. NP3 Hume pipe
-
-
-
... More
Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 12 pits for Pumps &. LT Panel. Size of earthing plate 600mm x 600mm x6 mm with salt and coal.
12
-
-
... More
Mannual crimping tools-
Crimping range: 400 sq.mm.,Make/ Model: Crimp well
1
-
-
... More
Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m.
-
-
-
... More
Tools
-
-
-
... More
03.00 - 04.50 m depth
1051
-
-
... More
One No. CT operated ammeter suitable ampere rating with ammeter
-
-
-
... More
Supply of submersible sewage bottom suction non clog Pumpsets having Speed 960 RPM & Bearing insulation should be compatible for VFD operation and handling raw sewage of Sp. Gr. 1.05 with Pumpset accessories such as duck foot bend,Pedestal auto coupling with Guide rail system of SS 316 submersible pump sets comprises of guide pipe, bracket, upper guide rail holder and lifting chain with D-Sackle etc complete and Material of Construction shall be-:Casing- 2% Ni-CI with hardness ranges 220- 275 BHN approx, Impeller - Super duplex steel , Hardness 220-260 BHN.,Shaft- SS 410 with ceremic coating, hardness 700 BHN at the minimum.,Bearing- anti frictional L-10 with 60000 hours life.Operational Voltage 380±10% 3 phase AC Supply. The duties of pumpsets as follows -: (NOTE- Pump Discharge, Head & motor HP are tentative and may vary as per actual site condition at the time of execution.)
-
-
-
... More
350 mm dia for common header
1
-
-
... More
(c) 03.00 to 04.50 m. depth
616.4
-
-
... More
EARTHING
-
-
-
... More
One No frequency meter.
-
-
-
... More
350 mm dia for common header
1
-
-
... More
Manually operated Thimble Mounted CI Sluice Gates of rising spindle type with gearbox, suitable for 1100mm. dia incoming sewer as per site requirement.(Note : Size is tentative and may vary as per actual site conditions.)
1
-
-
... More
Sets of timer and relays for overload and underload.
-
-
-
... More
Cartage of excavated earth from site to the place as directed by engineer in charge (the work being in narrow lanes) and carring back for filling of tranches after laying and jointing the pipes including all labour T&P etc. complete required for the proper completion of the work as per direction of Engineer in Charge.
11239.21
-
-
... More
0.0 to 1.5 mtr. Depth
-
-
-
... More
1100V grade, 2Rx3C x16 mm2 PVC insulated PVC sheathed submersible Copper flat cable from junction box to motor. (2x6x30 mtr.)
360
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements