UP Jal Nigam Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date3 Sep 2024
Closing Date18 Sep 2024
Tender Amount₹ 23,90,48,675
Costs
EMD
₹ 23,90,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Summary
Nagar Panchayat Gaura Badshahpur Water Supply Scheme Jaunpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPJNM_951621_1Bid Award Id
ViewTender No
1072/08-081-005/93 Date 02.09.2024Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fixing of 3.6 m & 1.20 m wide MS gate including fabrication and supply of steel and construction of boundary wall pillars of size 1.35mx0.23mx0.23m with ornamental brick work 115mm th. around RCC, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all materials, labour,T&P etc.required for proper completion of works as per instructions of Engineer-in-charge.
7
-
-
Construction of Interlocking pavement Road for approach to water works, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all materials , labour, T&P etc.required for proper completion of work as per instructions of Engineer -in -charge.
237.5
-
-
Earth filling inside the water works campus
480
-
-
Provision for horticulture for site development of water works
1
-
-
STAFF QUARTER AND MCS or SCADA ROOM
-
-
-
Supply of all materials, labour, T&P, complete and construction of a Half set of One No. Single Roomed staff quarters for operating staff , pump operator, chaukidar, pump attendant and other as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour T&P etc.for proper completion of work as per instructions of Engineer -in -charge.
3
-
-
Construction of MCS, Centralized Control Room including Supply of all materials, labour, T&P, complete and other as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour T&P etc.for proper completion of work as per instructions of Engineer -in -charge
1
-
-
PUMP HOUSE
-
-
-
Provide all materials, labour, T&P etc. complete and construct Pump house size (3.00 x 3.60) m Chlorinating room size (1.8 x 2.5)m as per departmental type design and drawing (drawing no-D-2) and as per the specifications for civil work given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer -in -charge.
-
-
-
Zone-1 (FOR T.W. no. 1, 2& 3)
3
-
-
Zone-2 (FOR T.W. no. 4 & 5)
2
-
-
Zone-3 (FOR T.W. no. 6 & 7)
2
-
-
Construction of Stilling chamber and V Notch for bye-Pass Arrangement of Tubewells for Zone 1,2 &3
7
-
-
RISING MAIN AND APPURTENANT WORKS FOR ZONE 1,2&3
-
-
-
Supply of D.I. Pipe with specials of following size/wall thickness with I.S. 8329/2000 or its latest amendments with jointing materials including F.O.R. destination up to site store inclusive of all taxes and duties, third party inspection chargrs. Packing and forwarding charges road transportion charges , insurance etc. with loading unloding and stacking etc. all complete.
-
-
-
150 MM Dia D.I. K-9 (ZONE 2)
650
-
-
200 MM Dia D.I. K-9 (ZONE 1&3)
2210
-
-
Supply of D.I D/F specials including F.O.R destination and all taxes and insurance etc complete.
1
-
-
Supply of following size C.I.D./F sluice valve capable of standing working pressure of 10 kg/cm2 as per IS 14846/2000 or its latest amendment including F.O.R. destination up to site store inclusive of all taxes and duties third party inspection charges. packing and forwarding charges, road transportation charges, insurance etc. with loading unloading and stacking etc. all complete.
-
-
-
150 MM
2
-
-
200 MM
5
-
-
Carting of following size CI sliuce valve from site store to site of work lowering the same into trenches and fixing in position and jointing the same with supply of all materials and testing etc. complete.
-
-
-
150 MM
2
-
-
200 MM
5
-
-
Excavation of earth for pipe line trenches with lift upto 1.5 and lead upto 50m filling back the earth into trenches including watering ramming and disposal of surplus materials with in 50m lead etc. complete.
2682.23
-
-
Carting from store to site of work following D.I. Pipe with specials, lowering the same into trenches and laying true to alignment and gradient including jointing properly testing of pipe line (but excluding the cost of trenching and cutting of pipe for making the length etc. complete.
-
-
-
150 MM
650
-
-
200 MM
2210
-
-
Supply of all materials, labour and T&P to construct masonary type sluice valve chamber complete as per type design.
7
-
-
Supply of all materials , labour T&P and construct RCC thrust block at the bends etc. complete.
11
-
-
OVERHEAD TANK
-
-
-
Supply of all materials labour T&P etc. complete for construction of R.C.C. Over Head Tank of 1300 KL capacity with 22 Meter staging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings. All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456 Seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M30 balcony, M.S. ladder made of 45x45x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, R.C.C. railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specifications with all jointing materials for proper completion of work, Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound, Painting of all concrete surface and steel pipe works with three coats of approved cement paint and anticorrosive paints.(FOR ZONE -1)
1
-
-
Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank of 600 KL capacity with 22 Meter staging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings. All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456 Seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M30 balcony, M.S. ladder made of 45x45x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, R.C.C. railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case and top dome, supported on 45x45x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specifications with all jointing materials for proper completion of work, Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound, Painting of all concrete surface and steel pipe works with three coats of approved cement paint and anticorrosive paints.(FOR ZONE -2).
1
-
-
Supply of all materials labour T&P etc. complete for construction of R.C.C. Over Head Tank of 900 KL capacity with 22 Meter staging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings. All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456 Seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M30 balcony, M.S. ladder made of 45x45x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, R.C.C. railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specifications with all jointing materials for proper completion of work, Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound, Painting of all concrete surface and steel pipe works with three coats of approved cement paint and anticorrosive paints.(FOR ZONE -3)
1
-
-
DISTRIBUTION SYSTEM
-
-
-
Supply of following sizes and type of pipes with specials and all jointing materials such as socket, rubber gasket as per IS 4984/1995 and IS 1592/2003 or their latest amendment including F.O.R. destination up to site store inclusive of all taxes and duties,third party inspection charges,packing and forwarding charges ,road transportation charges,insurance etc. with loading, unloading and stacking etc. all complete.
-
-
-
D.I. K-7
-
-
-
250 MM dia
5316
-
-
300 MM dia
50
-
-
H.D.P.E (Grade - PE 100) PN - 6
-
-
-
90MM O.D.
81058
-
-
110MM O.D.
4586
-
-
140MM O.D.
4549
-
-
160MM O.D.
4062
-
-
200MM O.D.
7659
-
-
Carting, laying and jointing of the following sizes of pipe into the trenches including cost of all jointing material, labour, T & P and testing etc, complete.
-
-
-
D.I. K-7
-
-
-
250 MM dia
5316
-
-
300 MM dia
50
-
-
H.D.P.E (Grade - PE 100) PN - 6
-
-
-
90MM O.D.
81058
-
-
110MM O.D.
4586
-
-
140MM O.D.
4549
-
-
160MM O.D.
4062
-
-
200MM O.D.
7659
-
-
Supply of specials for above above HDPE pipe (5% of supply of pipes amount)
1
-
-
Supply of specials for above above DI pipe (10% of supply of pipes amount)
1
-
-
Excavation for pipeline work in Ordinary Soil with lift up to 1.5 M and lead up to 50 M including filling back the excavated earth into the trenches with watering, ramming and disposal of surplus earth with in 50 M lead.
85064
-
-
Supply of following types of fitting including railway freight, cartage upto store, all taxes and insurance. CI D/F Kirloskar Sluice Valves, Scour Valve Class-I as per IS 780 (1969) suitable for a working pressure of 10 Kg / Sq.Cm.
-
-
-
80 MM dia
62
-
-
100MM dia
7
-
-
125 MM dia
5
-
-
150 MM dia
5
-
-
200 MM dia
4
-
-
250MM dia
7
-
-
Scour Valve 80mm dia
5
-
-
Fire Hydrant (Sluice valve type) 80 mm dia
3
-
-
CI single ball type Air Valve 25 mm Dia
7
-
-
Carting of following sizes C.I.D./F Sluice Valve and specials from site store to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete including supply of jointing materials.
-
-
-
80 MM dia
62
-
-
100MM dia
7
-
-
125 MM dia
5
-
-
150 MM dia
5
-
-
200 MM dia
4
-
-
250MM dia
7
-
-
Scour Valve 80mm dia
5
-
-
Fire Hydrant (Sluice valve type) 80 mm dia
3
-
-
CI single ball type Air Valve 25 mm Dia
7
-
-
Supply of all materials and construct following chambers as per type design with supply of all labour, T&P etc. complete.
-
-
-
Masonary Type chamber
11
-
-
Fire Hydrant Chamber
3
-
-
Air Valve Chamber
7
-
-
Surface Box Type chamber
84
-
-
Construction of Single Tap Pillar Type Stand Post as per departmental type design including supply of all materials, labour T&P etc. required for proper completion of work.
15
-
-
Dismantling of following type of road (if multiple layers exist then only top layer will be considered for measurement ) and temporary Reinstatement of road with old materials including supply of all materials, labour, T&P etc. complete.
-
-
-
BOE Road
6888
-
-
C.C. Road
2532
-
-
Bitumen Road
13459
-
-
Interlocking
6706
-
-
Reinstatement of following type of road surface for laying of pipe, sorting out and stacking of useful material and disposal of unserviceable materials upto distance of 50 m as per PWD/local body/NHAI specification including supply of all materials, labour, T & P etc. required for completion of work.
-
-
-
BOE Road
6888
-
-
C.C. Road
2532
-
-
Bitumen Road
13459
-
-
Interlocking (with 60% old+40% new tiles)
6706
-
-
Provision for crossings of nalas & culvert including shifting of telephone cables etc. Along the alignment of pipeline including supply of C.I. tyton pipe and specials etc. complete. (3.5 M. Wide Road)
52
-
-
Provision for crossing of national highway (NH) 128A by trenchless technology.
25
-
-
making house connection with supply,carting,laying & jointing of ferrul,20mm(OD)HDPE & GI pipes & I.S.I. Marking, saddle/clamp of required size C.I. bib, J Hook or M.S. cock of approved quality M.S.U. clamp , 25x25x25cm C.C. grouting of unsupported GI pipe with dismantling and reinstatement of following type of roads or as directed by Engineer- in-charge inclunding cost of all jointing materials, specials, labour, testing and T&P etc. complete.
-
-
-
In C.C. Roads
-
-
-
For 90 mm to 110mm dia
172
-
-
For 125 mm to 160 mm dia
17
-
-
For 180 mm to 250 mm dia
26
-
-
For 250 mm to 300mm dia
2
-
-
In Bitumenous Roads
-
-
-
For 90 mm to 110mm dia
1326
-
-
For 125 mm to 160 mm dia
134
-
-
For 180 mm to 250 mm dia
201
-
-
For 250 mm to 300mm dia
17
-
-
In B.O.E. Roads
-
-
-
For 90 mm to 110mm dia
598
-
-
For 125 mm to 160 mm dia
61
-
-
For 180 mm to 250 mm dia
91
-
-
For 250 mm to 300mm dia
8
-
-
In C.C. Interlocking Tiles Roads
-
-
-
For 90 mm to 110mm dia
470
-
-
For 125 mm to 160 mm dia
48
-
-
For 180 mm to 250 mm dia
71
-
-
For 250 mm to 300mm dia
6
-
-
In Kaccha Roads
-
-
-
For 90 mm to 110mm dia
1710
-
-
For 125 mm to 160 mm dia
173
-
-
For 180 mm to 250 mm dia
260
-
-
For 250 mm to 300mm dia
22
-
-
E&M WORKS
-
-
-
ZONE 1- TW-1 (800 LPM, 60M Head) (E&M WORK)
-
-
-
TUBE WELL CONSTRUCTION & DEVELOPMENT
-
-
-
TRANSPORTATION
-
-
-
Transportation, Erection & Dismantling of rig machine
3
-
-
Provision of site Security arrangement and site Barricading arrangement with safety norms during complete period of work .
3
-
-
CONSTRUCTION OF TUBE WELL (DRILLING)
-
-
-
ERECTION OF RIG MACHINE AND DRILLING WORK-
-
-
-
Leveling and dressing of site and camp equipage and erection of D.C. rig machine at pin point and drilling up to 330 metre deep.
-
-
-
Drilling of 625mm dia bore from G.L. to 65 m BGL.
195
-
-
Drilling of 500mm dia bore from 65m BGL to 100m BGL.
105
-
-
Drilling of 500mm dia bore from 100m BGL to 200m BGL.
300
-
-
Drilling of 500mm dia bore from 200m BGL to 300m BGL.
300
-
-
Drilling of 500mm dia bore from 300m BGL to 330m BGL.
90
-
-
LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OF T.W. BY GRAVEL-
-
-
-
Lowering of 300mmx200mm dia tube well assembly in bore hole and shrouding of pea Gravel between annular space of bore hole and T.W. assembly from G.L. to 300m BGL.
-
-
-
Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 60m BGL.
180
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 60m B.G.L To 100m BGL.
120
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
300
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
300
-
-
Extra Work (Site Clearance), Arrangement of Water Disposal and silt /malba during development of Tubewell.
3
-
-
MATERIALS
-
-
-
TUBE WELL: ASSEMBLY
M.S. Tubewell assembly with all required parts like plain Pipe, Slotted Pipe, Rings, well cap, Bail Plug, Clamp, Reducer, Centre Guide, Support Structure etc
-
-
-
300mm. dia size MSERW housing pipe 7.1 mm thick.
180
-
-
200mm.dia MSERW 7.1mm thick slotted pipe.
90
-
-
200mm.dia MSERW 7.1mm thick plain pipe.
630
-
-
300X200 mm. dia M.S reducer 16.0 mm. thick.
3
-
-
300mm. size M.S. well cap. 12mm thick.
3
-
-
300mm size M.S. half thread nipple.
3
-
-
300 mm. size M.S. ring 100mmx12mm tihck.
33
-
-
200 mm. size M.S. ring 100mmx12mm tihck.
105
-
-
300 mm.dia size M.S. S/I clamp.
3
-
-
Tube well supporting Frame.
3
-
-
200mm.dia size M.S. bail plug.
3
-
-
200mm Center guide.
30
-
-
300mm dia half thread socket
3
-
-
PEA-GRAVEL-
-
-
-
1.60mm to 4.80mm. size pea gravel of Lalkuwan quarry duly screened, washed and proper stacking at site.
271
-
-
DEVELOPMENT OF TUBE WELL
-
-
-
Development of tube well by 600 PSI air compressor
-
-
-
Transportation,Installation, Dismantling of compressor including levelling & dressing of site and camp equipage.
3
-
-
Development of tube well by 600 PSI air compressor.
210
-
-
Sodium Hexametaphasphate
150
-
-
Development of tube well by 3 cusec O.P. unit
-
-
-
Transportation,Installation & Dismantling of O.P. unit including levelling & dressing of site and camp equipage.
3
-
-
Development of tube well by 3 cusec O.P. unit.
450
-
-
TEST :-
-
-
-
Chemical and bacteriological test.
3
-
-
Yield and verticality test of tube well.
3
-
-
Logging of tube well.
3
-
-
Zone Testing AS per site requrement
-
-
-
Zone testing including all requred material , labour T&P etc. complete in all respect.
3
-
-
Cement sealing of contamenated accufer/zone including all requred material , labour T&P etc. complete in all respect.
3
-
-
Supply and lowering of 90mm dia UPVC gravel feed pipe.
300
-
-
Other miscellaneous work as per site requirement ie - vehicle / transportation arramgement for site supervision
3
-
-
PUMP-SET
-
-
-
1100 LPM, 60m head 2900rpm, 25 H.P. submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989)- 1 SET, Soft control panel fabricated with 22mm tick M.S. plate dust and vermin proof having MCCB including following items. 1SET,Voltmeter 0-500 volt range with selector switch. 1 NOS,MCCB 100 amp. 1 NOS,Ammeter 0-100 amp. range with selector switch. 1 NOS,KWI meter 1 NOS,Power factor meter 1NOS,Frequency meter 1NOS,Hour count meter 1 NOS,Single phase preventer 1 NOS,Power capacitor of suitable capacity 1 SET,Phase indicting lamps with toggle switch. 1 SET,Instrument fuses of 6 amp. capacity. 1 SET,15 amp. switch fuses unit for light and fan point 1 NOS,Submersible cable of suitable size 90 min case any other item required for the completion of this item including Manually operated oil immersed at auto transformer starter with suitable relay to operate the pump set.1 set
3
-
-
MAIN PIPING AND VALVES 1 set
-
-
-
150 mm dia 5.4mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3m long 30 m with 1m long top pipe with cap (Damdam) and sealing ring. 8 nos, 100mm dia size CI-D/F 90 Degree bend-1 nos,100mm dia size CI-A/F Tee -1 nos,100mm dia size M.S. Distance piece 1.00m long 2 Nos. and 1.5m long 1 No. -M.S. enlarger/reducer of suitable size. -1 nos,100mm dia Kirlosker/IVC make Sluice Valve,P.N. rating 1.0 Having following specification confirming. (As per IS - 14846-2000)-2 nos,Non rising system with hand wheel ,Both end flangedFace ring pressed in body and wedge. With Isometric trap axial threads for smooth operation of stream.Wedge tarred on both sides provided with deep grooves inside. Applicati100mm dia Kirlosker/IVC makeReflux Valve on Handling of clear water sp. gr. 1.0 (Confirming to 15.780/I.S. 2905)(Confirming to IS-5312 part-I) Having following specification :-1set,Suitable for handling clear water having specific gravity and temperature up to 500. Both end flanged.Door contact on the periphery.Body: Gun Metal.Hinge pin stainless steelDisc face: High quality mature rubber or better. TOOLS (REPUTED MAKE) IN A TOOL KIT-1 set. Pipe wrenches -2 nos,D/E spanner 22/6 mm-6pcs,Adjustable wrench 300 mm-1 no,Screw driver (a) 12 X 250 mm-1 no,(b) 8 X 250 mm-1no,(c) 5 X 250 mm-1 no,Combination plier 200mm-1no,Nose plier 200 mm-1no,Hammer with handle 1 Kg. -1 no,Line tester (Taparia make)-1no,GAUGES :-1 set,Febrick/H Guru make Pressure gauge -1 no,Febrick/H Guru make Depth Gauge-1 no,Other necessary fitting for gauges, control cock, Air hand pump, sunmica top wooden board flexible PVC armoured 12mm airline 40m including all accessories. 1set, Misc. items such as protection ring, cutout, transformer oil, electric resistanace rubber sheet etc.-1 no,LIFTING TACKLE (REPUTED MADE)2 tones capacity 4.5 m lift, spur geared chain pulley block (Tested on 3 Tones.)-1 no
3
-
-
Cost of additional 100mm dia 3m long M.S. flange colanm pipe.
12
-
-
Supply and installation of Electro Mechanical type Dozer set of suitable capacity working pressure 0-4 Kg/Cm2 complete with panel and 100 liter capacity syntax make tank suitable for 600 to 3000 LPM discharge of pumping plant.
3
-
-
Power Wiring and Earthing, Internal Wiring of Pump House , internal and external lighting with solar inverter and panel capacity of 1kw
3
-
-
Painting of pumping plant with approved anticorrosive and specified colour paint-2 coat.
3
-
-
One month watch & ward during the period of installation.
3
-
-
TRAIL AND RUN OF PUMPING PLANT FOR THREE MONTHS
-
-
-
Cost Pump operator 1 Nos.x3month
9
-
-
Cost of sodium hypochloride for chlorination of water
9
-
-
Expenditure on electricity consumed
9
-
-
Complete SCADA automation work for Tube well and O.H.T
-
-
-
Redundant RTU intelligent GSM based remote treminal unit with redundant CPU and power supply with analog and digital parameters and features as specified0 One each for each Tube well to store and transmit data at multiple stations and also compatible to satellite communication
3
-
-
GSM based wireless communication system for RTU Capable to transfer and gether data from remote to control stations. All accessories included with single enhancer, antenna specs already.
3
-
-
SITC OF Auto phase reversal unit up to 30 HP
3
-
-
SITC OF Actuator & control switch gear for 150/200/300 mm size CIDF sluice Valve (3 NOS) .
3
-
-
Electro Magnetic Flow meter (2NOS) suitable for 150/200/300 mm size delivery Pipe
3
-
-
Smart Pressure Transmeter and Ultrasonic Level Senser with display
3
-
-
Complete cabling for 1 No. of Tubewell including cable in T.W 1, pressure transmeter to room, flow transmeter to room OHT to room, level transmeter to room.
3
-
-
Control Panel with IP 54 Protection , industrial grade for all equipment separate for control (24 V) and power equipments WITH 7 inch HMI touch screen suitable to communicate with PLC/RTU for local; display and control of process parameters as specified in technical specification .
3
-
-
Installation, commissioning & testing
3
-
-
Test & Trail run for 3 months
3
-
-
SITC OF Voltage Stabilizer
-
-
-
Supply & Erection of Servo Stabilizer of 25 KVA Input voltage range = 200 - 480 volts, 3 Phase, A.C. Supply Out put voltage range = 415 + 1% , 3 Phase Insulation = ' C ' Class Temperature Rise = 45 Degree Centigrade above ambient temperature Frequency = 50 Hz Cooling = Air Cooled Operation mode = Automatic
3
-
-
ZONE 2- TW-2 (700 LPM 60m Head, ) (E&M WORK)
-
-
-
TUBE WELL CONSTRUCTION & DEVELOPMENT
-
-
-
TRANSPORTATION
-
-
-
Transportation, Erection & Dismantling of rig machine
2
-
-
Provision of site Security arrangement and site Barricading arrangement with safety norms during complete period of work .
2
-
-
CONSTRUCTION OF TUBE WELL (DRILLING)
-
-
-
ERECTION OF RIG MACHINE AND DRILLING WORK-
-
-
-
Leveling and dressing of site and camp equipage and erection of D.C. rig machine at pin point and drilling up to 330 metre deep.
-
-
-
Drilling of 625mm dia bore from G.L. to 65 m BGL.
130
-
-
Drilling of 500mm dia bore from 65m BGL to 100m BGL.
70
-
-
Drilling of 500mm dia bore from 100m BGL to 200m BGL.
200
-
-
Drilling of 500mm dia bore from 200m BGL to 300m BGL.
200
-
-
Drilling of 500mm dia bore from 300m BGL to 330m BGL.
60
-
-
LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OF T.W. BY GRAVEL-
-
-
-
Lowering of 300mmx200mm dia tube well assembly in bore hole and shrouding of pea Gravel between annular space of bore hole and T.W. assembly from G.L. to 300m BGL.
-
-
-
Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 60m BGL.
120
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 60m B.G.L To 100m BGL.
80
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
200
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
200
-
-
Extra Work (Site Clearance), Arrangement of Water Disposal and silt /malba during development of Tubewell.
2
-
-
MATERIALS
-
-
-
TUBE WELL: ASSEMBLY
M.S. Tubewell assembly with all required parts like plain Pipe, Slotted Pipe, Rings, well cap, Bail Plug, Clamp, Reducer, Centre Guide, Support Structure etc
-
-
-
300mm. dia size MSERW housing pipe 7.1 mm thick.
120
-
-
200mm.dia MSERW 7.1mm thick slotted pipe.
60
-
-
200mm.dia MSERW 7.1mm thick plain pipe.
420
-
-
300X200 mm. dia M.S reducer 16.0 mm. thick.
2
-
-
300mm. size M.S. well cap. 12mm thick.
2
-
-
300mm size M.S. half thread nipple.
2
-
-
300 mm. size M.S. ring 100mmx12mm tihck.
22
-
-
200 mm. size M.S. ring 100mmx12mm tihck.
70
-
-
300 mm.dia size M.S. S/I clamp.
2
-
-
Tube well supporting Frame.
2
-
-
200mm.dia size M.S. bail plug.
2
-
-
200mm Center guide.
20
-
-
300mm dia half thread socket
2
-
-
PEA-GRAVEL-
-
-
-
1.60mm to 4.80mm. size pea gravel of Lalkuwan quarry duly screened, washed and proper stacking at site.
180
-
-
DEVELOPMENT OF TUBE WELL
-
-
-
Development of tube well by 600 PSI air compressor
-
-
-
Transportation,Installation, Dismantling of compressor including levelling & dressing of site and camp equipage.
2
-
-
Development of tube well by 600 PSI air compressor.
140
-
-
Sodium Hexametaphasphate
100
-
-
Development of tube well by 3 cusec O.P. unit
-
-
-
Transportation,Installation & Dismantling of O.P. unit including levelling & dressing of site and camp equipage.
2
-
-
Development of tube well by 3 cusec O.P. unit.
300
-
-
TEST :-
-
-
-
Chemical and bacteriological test.
2
-
-
Yield and verticality test of tube well.
2
-
-
Logging of tube well.
2
-
-
Zone Testing AS per site requrement
-
-
-
Zone testing including all requred material , labour T&P etc. complete in all respect.
2
-
-
Cement sealing of contamenated accufer/zone including all requred material , labour T&P etc. complete in all respect.
2
-
-
Supply and lowering of 90mm dia UPVC gravel feed pipe.
200
-
-
Other miscellaneous work as per site requirement ie - vehicle / transportation arramgement for site supervision
2
-
-
PUMP-SET
-
-
-
700 LPM, 60m head 2900rpm, 15 H.P. submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989)- 1 SET, Soft control panel fabricated with 22mm tick M.S. plate dust and vermin proof having MCCB including following items. 1SET,Voltmeter 0-500 volt range with selector switch. 1 NOS,MCCB 100 amp. 1 NOS,Ammeter 0-100 amp. range with selector switch. 1 NOS,KWI meter 1 NOS,Power factor meter 1NOS,Frequency meter 1NOS,Hour count meter 1 NOS,Single phase preventer 1 NOS,Power capacitor of suitable capacity 1 SET,Phase indicting lamps with toggle switch. 1 SET,Instrument fuses of 6 amp. capacity. 1 SET,15 amp. switch fuses unit for light and fan point 1 NOS,Submersible cable of suitable size 90 min case any other item required for the completion of this item including Manually operated oil immersed at auto transformer starter with suitable relay to operate the pump set.1 set
2
-
-
MAIN PIPING AND VALVES 1 set
-
-
-
100 mm dia 5.4mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3m long 30 m with 1m long top pipe with cap (Damdam) and sealing ring. 8 nos, 100mm dia size CI-D/F 90 Degree bend-1 nos,100mm dia size CI-A/F Tee -1 nos,100mm dia size M.S. Distance piece 1.00m long 2 Nos. and 1.5m long 1 No. -M.S. enlarger/reducer of suitable size. -1 nos,100mm dia Kirlosker/IVC make Sluice Valve,P.N. rating 1.0 Having following specification confirming. (As per IS - 14846-2000)-2 nos,Non rising system with hand wheel ,Both end flangedFace ring pressed in body and wedge. With Isometric trap axial threads for smooth operation of stream.Wedge tarred on both sides provided with deep grooves inside. Applicati100mm dia Kirlosker/IVC makeReflux Valve on Handling of clear water sp. gr. 1.0 (Confirming to 15.780/I.S. 2905)(Confirming to IS-5312 part-I) Having following specification :-1set,Suitable for handling clear water having specific gravity and temperature up to 500. Both end flanged.Door contact on the periphery.Body: Gun Metal.Hinge pin stainless steelDisc face: High quality mature rubber or better. TOOLS (REPUTED MAKE) IN A TOOL KIT-1 set. Pipe wrenches -2 nos,D/E spanner 22/6 mm-6pcs,Adjustable wrench 300 mm-1 no,Screw driver (a) 12 X 250 mm-1 no,(b) 8 X 250 mm-1no,(c) 5 X 250 mm-1 no,Combination plier 200mm-1no,Nose plier 200 mm-1no,Hammer with handle 1 Kg. -1 no,Line tester (Taparia make)-1no,GAUGES :-1 set,Febrick/H Guru make Pressure gauge -1 no,Febrick/H Guru make Depth Gauge-1 no,Other necessary fitting for gauges, control cock, Air hand pump, sunmica top wooden board flexible PVC armoured 12mm airline 40m including all accessories. 1set, Misc. items such as protection ring, cutout, transformer oil, electric resistanace rubber sheet etc.-1 no,LIFTING TACKLE (REPUTED MADE)2 tones capacity 4.5 m lift, spur geared chain pulley block (Tested on 3 Tones.)-1 no
2
-
-
Cost of additional 100mm dia 3m long M.S. flange colanm pipe.
8
-
-
Supply and installation of Electro Mechanical type Dozer set of suitable capacity working pressure 0-4 Kg/Cm2 complete with panel and 100 liter capacity syntax make tank suitable for 600 to 3000 LPM discharge of pumping plant.
2
-
-
Power Wiring and Earthing, Internal Wiring of Pump House , internal and external lighting with solar inverter and panel capacity of 1kw
2
-
-
Painting of pumping plant with approved anticorrosive and specified colour paint-2 coat.
2
-
-
One month watch & ward during the period of installation.
2
-
-
TRAIL AND RUN OF PUMPING PLANT FOR THREE MONTHS
-
-
-
Cost Pump operator 1 Nos.x3month
6
-
-
Cost of sodium hypochloride for chlorination of water
6
-
-
Expenditure on electricity consumed
6
-
-
Complete SCADA automation work for Tube well and O.H.T
-
-
-
Redundant RTU intelligent GSM based remote treminal unit with redundant CPU and power supply with analog and digital parameters and features as specified0 One each for each Tube well to store and transmit data at multiple stations and also compatible to satellite communication
2
-
-
GSM based wireless communication system for RTU Capable to transfer and gether data from remote to control stations. All accessories included with single enhancer, antenna specs already.
2
-
-
SITC OF Auto phase reversal unit up to 30 HP
2
-
-
SITC OF Actuator & control switch gear for 150/200/300 mm size CIDF sluice Valve (3 NOS) .
2
-
-
Electro Magnetic Flow meter (2NOS) suitable for 150/200/300 mm size delivery Pipe
2
-
-
Smart Pressure Transmeter and Ultrasonic Level Senser with display
2
-
-
Complete cabling for 1 No. of Tubewell including cable in T.W 1, pressure transmeter to room, flow transmeter to room OHT to room, level transmeter to room.
2
-
-
Control Panel with IP 54 Protection , industrial grade for all equipment separate for control (24 V) and power equipments WITH 7 inch HMI touch screen suitable to communicate with PLC/RTU for local; display and control of process parameters as specified in technical specification .
2
-
-
Installation, commissioning & testing
2
-
-
Test & Trail run for 3 months
2
-
-
SITC OF Voltage Stabilizer
-
-
-
Supply & Erection of Servo Stabilizer of 25 KVA Input voltage range = 200 - 480 volts, 3 Phase, A.C. Supply Out put voltage range = 415 + 1% , 3 Phase Insulation = ' C ' Class Temperature Rise = 45 Degree Centigrade above ambient temperature Frequency = 50 Hz Cooling = Air Cooled Operation mode = Automatic
2
-
-
ZONE 3- TW-1 (1100 LPM 60M Head) (E&M WORK)
-
-
-
TUBE WELL CONSTRUCTION & DEVELOPMENT
-
-
-
TRANSPORTATION
-
-
-
Transportation, Erection & Dismantling of rig machine
2
-
-
Provision of site Security arrangement and site Barricading arrangement with safety norms during complete period of work .
2
-
-
CONSTRUCTION OF TUBE WELL (DRILLING)
-
-
-
ERECTION OF RIG MACHINE AND DRILLING WORK-
-
-
-
Leveling and dressing of site and camp equipage and erection of D.C. rig machine at pin point and drilling up to 330 metre deep.
-
-
-
Drilling of 625mm dia bore from G.L. to 65 m BGL.
130
-
-
Drilling of 500mm dia bore from 65m BGL to 100m BGL.
70
-
-
Drilling of 500mm dia bore from 100m BGL to 200m BGL.
200
-
-
Drilling of 500mm dia bore from 200m BGL to 300m BGL.
200
-
-
Drilling of 500mm dia bore from 300m BGL to 330m BGL.
60
-
-
LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OF T.W. BY GRAVEL-
-
-
-
Lowering of 300mmx200mm dia tube well assembly in bore hole and shrouding of pea Gravel between annular space of bore hole and T.W. assembly from G.L. to 300m BGL.
-
-
-
Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 60m BGL.
120
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 60m B.G.L To 100m BGL.
80
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
200
-
-
Lowering of 200mm dia MSERW plain/slotted pipe 7.1 mm thick from 100m B.G.L To 300m BGL.
200
-
-
Extra Work (Site Clearance), Arrangement of Water Disposal and silt /malba during development of Tubewell.
2
-
-
MATERIALS
-
-
-
TUBE WELL: ASSEMBLY
M.S. Tubewell assembly with all required parts like plain Pipe, Slotted Pipe, Rings, well cap, Bail Plug, Clamp, Reducer, Centre Guide, Support Structure etc
-
-
-
300mm. dia size MSERW housing pipe 7.1 mm thick.
120
-
-
200mm.dia MSERW 7.1mm thick slotted pipe.
60
-
-
200mm.dia MSERW 7.1mm thick plain pipe.
420
-
-
300X200 mm. dia M.S reducer 16.0 mm. thick.
2
-
-
300mm. size M.S. well cap. 12mm thick.
2
-
-
300mm size M.S. half thread nipple.
2
-
-
300 mm. size M.S. ring 100mmx12mm tihck.
22
-
-
200 mm. size M.S. ring 100mmx12mm tihck.
70
-
-
300 mm.dia size M.S. S/I clamp.
2
-
-
Tube well supporting Frame.
2
-
-
200mm.dia size M.S. bail plug.
2
-
-
200mm Center guide.
20
-
-
300mm dia half thread socket
2
-
-
PEA-GRAVEL-
-
-
-
1.60mm to 4.80mm. size pea gravel of Lalkuwan quarry duly screened, washed and proper stacking at site.
180
-
-
DEVELOPMENT OF TUBE WELL
-
-
-
Development of tube well by 600 PSI air compressor
-
-
-
Transportation,Installation, Dismantling of compressor including levelling & dressing of site and camp equipage.
2
-
-
Development of tube well by 600 PSI air compressor.
140
-
-
Sodium Hexametaphasphate
100
-
-
Development of tube well by 3 cusec O.P. unit
-
-
-
Transportation,Installation & Dismantling of O.P. unit including levelling & dressing of site and camp equipage.
2
-
-
Development of tube well by 3 cusec O.P. unit.
300
-
-
TEST :-
-
-
-
Chemical and bacteriological test.
2
-
-
Yield and verticality test of tube well.
2
-
-
Logging of tube well.
2
-
-
Zone Testing AS per site requrement
-
-
-
Zone testing including all requred material , labour T&P etc. complete in all respect.
2
-
-
Cement sealing of contamenated accufer/zone including all requred material , labour T&P etc. complete in all respect.
2
-
-
Supply and lowering of 90mm dia UPVC gravel feed pipe.
200
-
-
Other miscellaneous work as per site requirement ie - vehicle / transportation arramgement for site supervision
2
-
-
PUMPING PLANT
-
-
-
1100 LPM, 60m head 2900rpm, 30 H.P. submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989)-1 set- submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989)- 1 SET, Soft control panel fabricated with 22mm tick M.S. plate dust and vermin proof having MCCB including following items. 1SET,Voltmeter 0-500 volt range with selector switch. 1 NOS,MCCB 100 amp. 1 NOS,Ammeter 0-100 amp. range with selector switch. 1 NOS,KWI meter 1 NOS,Power factor meter 1NOS,Frequency meter 1NOS,Hour count meter 1 NOS,Single phase preventer 1 NOS,Power capacitor of suitable capacity 1 SET,Phase indicting lamps with toggle switch. 1 SET,Instrument fuses of 6 amp. capacity. 1 SET,15 amp. switch fuses unit for light and fan point 1 NOS,Submersible cable of suitable size 90 min case any other item required for the completion of this item including Manually operated oil immersed at auto transformer starter with suitable relay to operate the pump set.1 set
2
-
-
MAIN PIPING AND VALVES -1 set
-
-
-
150 mm dia 5.4mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3m long 30 m with 1m long top pipe with cap (Damdam) and sealing ring. -8 nos, 150mm dia size CI-D/F 90 Degree bend-1 nos,100mm dia size CI-A/F Tee -1 nos,150mm dia size M.S. Distance piece 1.00m long 2 Nos. and 1.5m long 1 No. -M.S. enlarger/reducer of suitable size. -1 nos,150mm dia Kirlosker/IVC make Sluice Valve,P.N. rating 1.0 Having following specification confirming. (As per IS - 14846-2000)-2 nos,Non rising system with hand wheel ,Both end flangedFace ring pressed in body and wedge. With Isometric trap axial threads for smooth operation of stream.Wedge tarred on both sides provided with deep grooves inside. Applicati 150mm dia Kirlosker/IVC makeReflux Valve on Handling of clear water sp. gr. 1.0 (Confirming to 15.780/I.S. 2905)(Confirming to IS-5312 part-I) Having following specification :-1set,Suitable for handling clear water having specific gravity and temperature up to 500. Both end flanged.Door contact on the periphery.Body: Gun Metal.Hinge pin stainless steelDisc face: High quality mature rubber or better. TOOLS (REPUTED MAKE) IN A TOOL KIT-1 set. Pipe wrenches -2 nos,D/E spanner 22/6 mm-6pcs,Adjustable wrench 300 mm-1 no,Screw driver (a) 12 X 250 mm-1 no,(b) 8 X 250 mm-1no,(c) 5 X 250 mm-1 no,Combination plier 200mm-1no,Nose plier 200 mm-1no,Hammer with handle 1 Kg. -1 no,Line tester (Taparia make)-1no,GAUGES :-1 set,Febrick/H Guru make Pressure gauge -1 no,Febrick/H Guru make Depth Gauge-1 no,Other necessary fitting for gauges, control cock, Air hand pump, sunmica top wooden board flexible PVC armoured 12mm airline 40m including all accessories. 1set, Misc. items such as protection ring, cutout, transformer oil, electric resistanace rubber sheet etc.-1 no,LIFTING TACKLE (REPUTED MADE)2 tones capacity 4.5 m lift, spur geared chain pulley block (Tested on 3 Tones.)-1 no
2
-
-
Cost of additional 100mm dia 3m long M.S. flange colanm pipe.
8
-
-
Supply and installation of Electro Mechanical type Dozer set of suitable capacity working pressure 0-4 Kg/Cm2 complete with panel and 100 liter capacity syntax make tank suitable for 600 to 3000 LPM discharge of pumping plant.
2
-
-
Power Wiring and Earthing, Internal Wiring of Pump House , internal and external lighting with solar inverter and panel capacity of 1kw
2
-
-
Painting of pumping plant with approved anticorrosive and specified colour paint-2 coat.
2
-
-
One month watch & ward during the period of installation.
2
-
-
TRAIL AND RUN OF PUMPING PLANT FOR THREE MONTHS
-
-
-
Cost Pump operator 1 Nos.x3month
6
-
-
Cost of sodium hypochloride for chlorination of water
6
-
-
Expenditure on electricity consumed
6
-
-
Complete SCADA automation work for Tube well and O.H.T
-
-
-
Redundant RTU intelligent GSM based remote treminal unit with redundant CPU and power supply with analog and digital parameters and features as specified0 One each for each Tube well to store and transmit data at multiple stations and also compatible to satellite communication
2
-
-
GSM based wireless communication system for RTU Capable to transfer and gether data from remote to control stations. All accessories included with single enhancer, antenna specs already.
2
-
-
SITC OF Auto phase reversal unit up to 30 HP
2
-
-
SITC OF Actuator & control switch gear for 150/200/300 mm size CIDF sluice Valve (3 NOS) .
2
-
-
Electro Magnetic Flow meter (2NOS) suitable for 150/200/300 mm size delivery Pipe
2
-
-
Smart Pressure Transmeter and Ultrasonic Level Senser with display
2
-
-
Complete cabling for 1 No. of Tubewell including cable in T.W 1, pressure transmeter to room, flow transmeter to room OHT to room, level transmeter to room.
2
-
-
Control Panel with IP 54 Protection , industrial grade for all equipment separate for control (24 V) and power equipments WITH 7 inch HMI touch screen suitable to communicate with PLC/RTU for local; display and control of process parameters as specified in technical specification .
2
-
-
Installation, commissioning & testing
2
-
-
Test & Trail run for 3 months
2
-
-
SITC OF Voltage Stabilizer
-
-
-
Supply & Erection of Servo Stabilizer of 40 KVA Input voltage range = 200 - 480 volts, 3 Phase, A.C. Supply Out put voltage range = 415 + 1% , 3 Phase Insulation = ' C ' Class Temperature Rise = 45 Degree Centigrade above ambient temperature Frequency = 50 Hz Cooling = Air Cooled Operation mode = Automatic
2
-
-
Local Control Station for all 7 nos TW - zone 1 , 2 &3 (Controlling and monitering in Gaurabadshahpur N.P )
-
-
-
CE / UL Certified industrial grade 55" LED MONITOR with latest configuration as per technical specification.
1
-
-
Video wall media player of same OEM
1
-
-
32" Desktop / PC with i7 processor as per specification with letest window 2 nos ( 1 nos for operator and 1 nos for Engineer incharge)
1
-
-
CE / UL certified 3 KVA UPS with batteries as per specification
1
-
-
GSM Based wireless/broad band communication system for PLC capable to transfer and recived datea & gather data from remote sites to LCS with Internet connection with Static IP
1
-
-
CE / UL certified industrial grade ETHERNET switch with surge protector
2
-
-
A-Full development of letest version of required TAGS SCADA Software with coustomization of software for LCS as per spec mentioned in technical bid document and direction given by EIC , B- Customised software with Mobile App facility system architecture ( Industria internet based & viewed through mobile apps for increased local & remote visibility) and Integration with existing MCS C- CE/UL certified LCS room PLC with redundent CPU & Power supply at LCS in IP54 enclouser as per spec mentioned in technical bid document and direction given by EIC.
1
-
-
Canon / HP / equivalent Laser printer with scanner , wifi coonection suitable 1018 or equivalent
1
-
-
Security surveillance IP camera with recorder. FOR all 4 nos TW and LCS Site location
1
-
-
SITC of A.C (1.5 Ton BEE 3 STAR with voltage stablizer 2NOS ),Table, Chair, Control Desk & other necessary Furniture items for LCS room AS PER DIRECTION of site engineer incharge with trail and run period.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements