UP Jal Nigam Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Construction Material
Eprocure
Opening Date29 Oct 2024
Closing Soon18 Nov 2024
Tender Amount₹ 19,48,17,000
Costs
EMD
₹ 20,00,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Summary
Milak Nagar Palika Parishad Reorganization Water Supply Scheme To The Ulb Milak
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPJNM_969946_1Tender No
1676/Nivida/71 dt 28/10/2024Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Submission of test report of Soil bearing capacity only through recognized and approved insitution as recommended by Engineer-in-charge.
-
-
-
Submission of 5 sets of detailed design and drawing of OHT from any recognized University as per direction of Engineer-in-charge.
-
-
-
All components of R.C.C. O.H.T. will be casted in M-30 grade conc. or as per approved design including fixing of various pipes and ventilator at top and fixing of M.S. Sheet of 10 gauge manhole cover of 60 cm x 60 cm size with frame and locking arrangement and railing including supply of all material.
-
-
-
R.C.C. stair case with 1.0 m minimum clear width attached with tank body (as two column based ) as an access to Balcony and Top Dome of tank from ground level as per design & drawing with 1.25m high railling and gate with cabin as per specification including supply of all materials.
-
-
-
M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC plateform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one alluminium ladder inside the tank body ( from manhole in top dome to bottom dome).
-
-
-
Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, around the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. posts of 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.
-
-
-
Supply and fixing of water level indicator with all necessary arragement such as inverter etc. As per specifications and fixing of lightening conductor and earth plate etc. As per specifications.
-
-
-
D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixed at top dome at proper place.
-
-
-
Testing of tank for water tightness as per specifications enclosed including supply of water.
-
-
-
Supply of all materials and construction of 80mm thick, 40 mm. thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber.
-
-
-
Three coats of approved quality and shade of Apex exterior paint like apex ultima supreme of approved quality over concrete work including supply of all materials etc.
-
-
-
Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material.
-
-
-
Supplying carting and fixing of following sizes D.I. D/F pipes with required specials such as well mouth, D.I./D.F. Bend, duck foot bend in inlet, outlet, over flow and wash out of the tank including supply of M.S. Clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications.
-
-
-
ZONE-1
1050 KL / 20.0 M Staging
-
-
-
(a) 150 mm dia in inlet as required (Seperate for each)
-
-
-
(b) 400 mm dia in outlet as required
-
-
-
(c) 400 mm dia in over flow as required
-
-
-
(d) 100 mm dia in wash out as required
-
-
-
ZONE-2
850 KL / 20.0 M Staging
-
-
-
(a) 150 mm dia in inlet as required (Seperate for each)
-
-
-
(b) 400 mm dia in outlet as required
-
-
-
(c) 400 mm dia in over flow as required
-
-
-
(d) 100 mm dia in wash out as required
-
-
-
Supplying and fixing of following sizes C.I./D/F sluice valves of PN-1 pressure of approved make as per relevant latest I:S specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.
-
-
-
ZONE-1
1050 KL / 20.0 M Staging
-
-
-
(a) 150 mm dia in inlet as required (Seperate for each)
-
-
-
(b) 400 mm dia in outlet as required
-
-
-
(c) 400 mm dia in over flow as required
-
-
-
(d) 100 mm dia in wash out as required
-
-
-
ZONE-2
850 KL / 20.0 M Staging
-
-
-
(a) 150 mm dia in inlet as required (Seperate for each)
-
-
-
(b) 400 mm dia in outlet as required
-
-
-
(c) 400 mm dia in over flow as required
-
-
-
(d) 100 mm dia in wash out as required
-
-
-
Supply all materials labour, T&P and construct brick masonry sluice valve chambers as required including R.C.C. Cover as per departmental type design at sluice valve fixed on inlet, outlet and washout pipes. The R.C.C. Cover shall be casted in M.S. Angle section with handles on both sides. (Sluice Valve chamber for washout and overflow may be combined.)
-
-
-
The words U.P. Jal Nigam, staging, year of construction, capacity of O.H.T. And slogan approved by Engineer-in-charge shall be painted prominently in letter not less than 30 cm in height on O.H.T.
-
-
-
Trial Run of all works for 4 Months.
-
-
-
Maintenance for 12 months including supply of all materials etc. Complete.
-
-
-
Rehabilation of divisional office including repairing of old existing structure ,fixing of new sanitaryfittings & construnction of new toilet ,supply and repairing of electronic equipements & furnitures with all labour material T&P etc all complete in direction engineer -in-charge.
1
460000
-
RISING MAIN
-
-
-
150 mm dia K-9
535
1678
-
100 mm dia K-9
15
1364
-
Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 8 KM.
-
-
-
B.O.E. ROAD
20.3
93
-
BITUMINOUS ROAD
92.94
177
-
C.C. ROAD
200.76
182
-
INTERLOCKING TILES
125
120
-
Excavation for pipe trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 8 Km from the center of the foundation trenches.
464.2
239
-
Carting from the store (up to 8 Km.) The following sizes of D.I. double pipeK-7 / K-9 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.
-
-
-
150 mm dia K-9
535
65
-
100 mm dia K-9
15
40
-
Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm including fittings Cartage of materials, labour,T&P etc. complete.
-
-
-
Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm including fittings Cartage of materials, labour,T&P etc. complete.
-
-
-
150 mm dia Sluice valve
5
23554
-
100 mm dia Sluice valve
1
12289
-
Provision for making bye pass arrangement including cutting of new/existing pipe ,fixing of fitting & providing all jointing materials. It also includes supply of Pipe,Tee,Tail pieces CI D joints nut bolts, rubber packings etc all complete.
-
-
-
150 mm dia
4
46363
-
100 mm dia
2
46363
-
Supply of all materials labour, T&P etc and construction of masonary type sluice valve chambers as per type design of the department. 1.2x1.2x1.5 with RCC slab of 120 mm thick including Fixing of slab etc.Complete.
6
22809
-
Design and construct Thrust Block made in RCC with cement. Coarse sand & 20 mm guadge stone balast in proporation 1;1.5:3 for pipe line , including supply of MS reinforcment wrought to required shape as nessasary , its bending fixing and bending the same with 0.5 mm thick bending wire in position and nessasary centering shuttring including curing as per instruction of EI. Size Of thrust Block-1.10x1.10x.1.10 M
14.63
8793
-
Mild steel or Iron work in plan work such as R.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
6.05
10355
-
Reinstatement of following type of road surface for laying pipe line including sorting out of serviceable materials and disposal of unserviceable materials upto a distance of 8 KM.
-
-
-
B.O.E. ROAD
20.3
329
-
BITUMINOUS ROAD
92.94
1191
-
C.C. ROAD
200.76
1100
-
INTERLOCKING TILES
125
815
-
DISTRIBUTION SYSTEM
-
-
-
Supply of the following sizes of DI K-7 & HDPE pipes(PN-6, PE-100) confirming to latest relevant I.S.Codes with DI/HDPE Specials conforming to I.S.- 8329/2000 and I.S.- 4984/2016 respectively etc complete in all respect F.O.R. destination including all taxes and insurance.
-
-
-
450 mm dia DI Pipe K-7
47
6423
-
400 mm dia DI Pipe K-7
176
5445
-
350 mm dia DI Pipe K-7
1850
4477
-
300 mm dia DI Pipe K-7
544
3637
-
250 mm dia DI Pipe K-7
1695
2833
-
200 mm dia DI Pipe K-7
3324
2156
-
160 mm dia HDPE pipe (PN-6, PE-100)
2604
567
-
140 mm dia HDPE pipe (PN-6, PE-100)
7367
272
-
110 mm dia HDPE pipe (PN-6, PE-100)
7367
272
-
90 mm dia HDPE pipe (PN-6, PE-100)
51605
188
-
Dismantling of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 8 KM.
-
-
-
B.O.E. ROAD
2763.12
93
-
BITUMINOUS ROAD
1752.79
177
-
C.C. ROAD
11135.51
182
-
INTERLOCKING TILES
27948.45
120
-
Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 8 KM from the center of the foundation trenches.
59099.36
239
-
Laying & jonting of the following types and zizes of HDPE pipes, including supply of all electro fusion fittings, specials, jointing materials, making arrangement of electro fusion jointing apparatus & supply of electricity using generator etc. as per site requirement. All jointing work in HDPE pipe must be carried out using electro fusion process confirming to ISI 4984/2016, IS 7634 PART-II or their amendment including freight, insurance charges F.O.R. up to destination.
-
-
-
450 mm dia DI Pipe K-7
47
285
-
400 mm dia DI Pipe K-7
176
240
-
350 mm dia DI Pipe K-7
1850
195
-
300 mm dia DI Pipe K-7
544
167
-
250 mm dia DI Pipe K-7
1695
129
-
200 mm dia DI Pipe K-7
3324
96
-
160 mm dia HDPE pipe (PN-6, PE-100)
2604
57
-
140 mm dia HDPE pipe (PN-6, PE-100)
4767
44
-
110 mm dia HDPE pipe (PN-6, PE-100)
7367
41
-
90 mm dia HDPE pipe (PN-6, PE-100)
51605
36
-
Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm including fittings Cartage of materials, labour,T&P etc. complete.
-
-
-
Sluice Valve
-
-
-
350 mm dia
2
124678
-
300 mm dia
1
85416
-
250 mm dia
4
53038
-
200 mm dia
4
37302
-
150 mm dia
3
23313
-
125 mm dia
9
17029
-
100mm dia
6
12163
-
80 mm dia
7
9122
-
Supply of 80 mm dia C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance.
8
9122
-
Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes.
4
8616
-
Supply of 25 mm dia screwed down type air valve with gun metal seat at site stone including all taxes.
5
3919
-
Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete.
-
-
-
Masonry type
23
22809
-
Surface box type
13
3910
-
scour valves chamber
8
8797
-
Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
4
8797
-
Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
5
6051
-
Construction of single pillar type masonry stand post as per type design.
12
7634
-
Provision for crossing of drains for laying of pipe line including dismentalling of drains & reconstruction of the same. drains including of Casing pipe as per Unite Estimate Minimum width of Nalas 0.75M
270
3198
-
Culvert Crosing 3.5 M and above with M.S Cover Pipe etc. Complete.
9
15082
-
Design and construct Thrust Block made in CC with cement. Coarse sand & 20 mm guadge stone balast in proporation 1;2;4 for pipe line , including supply of M.S. reinforcment wrought to required shape as nessasary , its bending fixing and bending the same with 0.5 mm thick bending wire in position and nessa -sary centering shuttring including curing as per instr -uction of EI. Size Of thrust Block-0.80x0.80x.0.80 M
6.15
6473
-
Reinstatement of following type of road surface for laying pipe line including sorting out of serviceable materials and disposal of unserviceable materials upto a distance of 8 KM.
-
-
-
B.O.E. Road with 40% new bricks and 60%used old bricks over 30mm compacted local sand including all materials,labour,T&P etc complete
2763.12
329
-
Bituminous Roads with granule sub base (G1-100mm, G2-75mm, G3-75mm thick), 50mm thick bituminous macadam over priming coat and tack coat and 30mm thick SDBC/BC over tack coat & disposal of all debris and surplus earth within 8 Km. distance as per direction of Engineer-in-charge, including all materials,labour,T&P etc complete
1752.79
1191
-
C.C. Road will be prepared with 10 cm thick P.C.C. 1:2:4 Cement: Coarse Sand & 20 mm Stone grit over base concrete 15 cm. P.C.C. 1:4:8 with cement coarse sand & 40 mm stone ballast after compacting the earth surface properly. The C.C. surface must be compacted with surface vibrator, including all materials,labour,T&P etc complete.
11135.51
1100
-
Interlocking Tile road: Tiles must be of the thickness & grade similar to that of the dismantled tiles over base concrete 75 mm thick PCC 1:4:8 cement: local sand: stone ballast as per existing road. The thickness of tiles shall be same as that of existing road, including all materials,labour,T&P etc complete.
27948.45
815
-
Provision of house connection using 15 mm HDPE/GI pipe averag 4 meter long ,gun metal ferrule, heavy duty PVC clamp, GI fittings and Two tap etc all complete.
-
-
-
For KR Road
1637
2650
-
For BR Road
428
3090
-
For CC Tile Road
3585
3450
-
For CC Road
2190
3527
-
Providing MS pipe for casing including cartage upto site cutting welding etc complete. & Trenchless excavation of road and placing of MS pipe in proper position and filling of extra earth removed during excation, removing of surplus earth from work place etc all complete.
-
-
-
350 mm dia 6 mm thick with casing(zone-2)
42
18426
-
200 mm dia 6 mm thick with casing(zone-3)
36
7194
-
Supply of all materials labour,T&P etc and constructi -on of following type chambers as per type design of the department. For Trenchless Size Of Chember 1.50x 1.50x3.30M
2
43850
-
Provision for diversion of routes fo laying of pipe line including construction of temporary passages if necessary making berikating by ballies fixing sign board etc as per requirement.
650
75
-
Pump House cum chlorinating room (3.60x3.0x3.0)m and (2.25 x 2.25x 3.00)m for Zone-1 &2 )- 4 Nos
-
-
-
Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 8 KM from the center of the foundation trenches.
95.52
191
-
Concrete with 40 mm gauge Ist class brick ballast, coarse sand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper completion of work.
17.92
4159
-
Ist class brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper completion of work.
43.76
5079
-
20 mm thick DPC With cement and approved coarse sand 1 :2 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
39.48
270
-
M.S. Angle iron chaukhat of 40mm x 40mm size supply and fixing including simple moulding straight work as in chaukhat and also supply of all material, labour, T&P etc. required for proper completion of the work.
8.32
9373
-
150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mm stone grit 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
0.99
8251
-
Ist class brick work in 1:6 cement and Coarse sand mortar in super structure including supply of all materials, labour,T&P etc required for proper completion of work.
79.64
5440
-
Supply and fixing of 1mm thick sheet iron panelled door, windows shutter including supply and fixing and adjustment of hinges , bolts, locks, handles, springs and other fittings but excluding supply and painting of fittings.
34.92
3197
-
Supply and fixing of hold fast in doors and windows of size 25cm x 4cm x 9mm flat iron including their cutting and moulding and welding to required shape also including other material such as nails and screws etc. required for proper completion of the work.
128
82
-
R.C.C in lintel with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
1.04
10489
-
R.C.C in sun shade with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing supply of all materials, labour,T&P etc required for proper completion of work.
0.8
10252
-
R.C.C in slab with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and binding its fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
12.96
9948
-
Mild steel or Iron work in plain work such as R.C.C. Work wrought to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
17.12
9373
-
Mild steel grills in windows, wrought to required heavy/ small size form including supply of all materials,labour,T&P etc. Required for proper completion of the work.
7.2
9373
-
Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete.
74.24
54
-
Lime concrete with 25mm gauge brick ballast, white lime and surkhi in the proportion 100:18:36 in roof terracing including supply of all materials,labour,T&P etc. Required for proper completion of the work.
7.44
5386
-
12 mm thick plaster with cement coarse sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work. From GL upto super structure.
735
170
-
Same as above item but in proprtion 1:2:2 with cement and coarse sand and fine sand mortar on ceiling
73.52
179
-
Supply andfixing 40 mm thick fully panelled sheesham wood shutter including supply and fixing and adjustment if hinges bolt, locks,handels ,spring and other fittings but excluding painting, supply of fittings
34.92
4977
-
same as avobe but glazed windows shutters
19.64
3536
-
Supply and fixing of oxidised iron fitting of approved make for doors and windows.
28.8
645
-
Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
69.84
178
-
White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
425.76
95
-
Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
425.76
145
-
Supply and fixing of Grider of 250 mm x 125 mm including its painting with approved paint and also one coat of primer.(SOR:1149) ISMB 250X125MM waight @ 47.30 kg per meter
6.8
10250
-
Sand filling in plinth including supply of excavated earth from distance of eight km.
22.28
1006
-
Supply of all materials, labour, T&P etc. required for the construction of stilling chamber V notch chamber 90*90 mm including supply of V notch etc. all complete.
4
45890
-
Rain water down pipe 100 mm dia AC/PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.SOR 1286
32
462
-
Cartage & cost of earth work in filling in plinth including supply of excavated earth from distance of eight km.
44.56
405
-
25 mm thick 1:2:4 plan cement concrete floor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part ist class brick ballast 40 cm gauge (1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supply material, labour,T&P etc required for proper completion of work.
74.24
569
-
Construction of RCC 1:1.5:3 main hole cover 700X700 opening in roof slab & fixing it at opening encluding supply of all materials etc complete.
0.24
10489
-
Boundary Wall, Approach Road & Site Development
-
-
-
Construction of boundry wall 1.8 meter height 0.23 M thick above P.L with RCC plinth beam of 0.20MX0.35 M ,RCC Coping .10M thick Total foundation depth 1.35M as per departmental type design enclosed in drawing including Plastring ,PCC, RCC,Colour painting with apex or ISI weather proof paint over two caot wall putty etc. supply of all material labour T&P etc required for completion of work.
354
7215
-
Construction of boundry wall extra brick work due to lo land as per required for completion of work
40.71
5079
-
Supply of all materials labour T&P etc and construction of gate pillars and fixing the MS gate in position including its fabrication etc as per departmental type design 3.6 M wide & 1.2 M height gate.
-
-
-
3.60 m wide & 1.20 m height gate with wicket gate.
3
45982
-
Construction of CC Tile (80 mm thick M-30 tile) approach road over 75mm thick PCC 1:4:8 including Prepata -tion of Sub grade etc. complete.(OHT Camp.)
156
850
-
Earth filling in the water works compound including carting of soil from 5-6 Km from site, spreading in 15 cm layer, watering, ramming upto optimum moisture content level etc all complete.
492
405
-
Construction of recharge well unit connecting Bye Pass of Tube well, Over flow of OHT & rain water of Engineer's Quarter / Staff Quarter etc complete.
4
248805
-
Provision for inside Construction of Rectangular 300X300 mm drain in water works compus.
354
1197
-
Slogan painting workfor awairness of save water and motivational quotes for saving water including supply of colours,paint and all material ,labour T&P for proper completion of work.
450
200
-
Provision of Tree & fixing of sign board at water works compound include- ing cost of tree,tree guard manaur, mali etc. complete.
1
23037
-
Scada room cum Lab(1 No), Staff Quarter (2 Nos.)
-
-
-
Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches.
99.39
191
-
Concrete with 40 mm gauge Ist class brick ballast,localsand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper compltion of work.
23.46
4159
-
Ist class brik work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper compltion of work.
65.67
5079
-
20 mm thick D.P.C. With cement and approved coarse sand 1 : 2 including supply of 5% water proofing material, labour, T&P etc required for proper compltion of work.
47.76
270
-
Ist class brik work in 1:6 cement and local sand mortar in Super Structure and plinth including supply of all materials, labour,T&P etc required for proper compltion of work.
101.07
5440
-
Same item as above but half brick thick wall.
0.9
5802
-
Supply and fixing of door & Window chaukhat fabricated with 50 x 50 x 6 mm size angle iron or other suitable angle iron and T iron and MS fabricated with 203 cm, flat iron or well mess size as directed by Engineer- in- charge. This item include supply and fixing 3 hinges 10 cm size on each faced door and window with one coat of red oxide primer painting including carting, loading,unloading etc complete and also supply of all materials, labour,T&P etc complete.
6.12
10250
-
Supply and fixing of holdfasts for door , windows frames.
186
105
-
R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
4.44
9061
-
R.C.C. Work in plinth beam cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
9.48
10252
-
R.C.C. Work in slab cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
44.52
9948
-
Mild steel or Iron work in plain work such as R.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
71.28
9373
-
Supply and fixing of Z section window frames and sutter openabele out side as per drawing and design approved by E/I hinges of approved qualitie M.S. or CI handals , holdfast 4 nos of MS Flat 25X5 mm and 150 mm Long pegs of MS 30 cm long having 4 holes with pagester and brackets welded or revited to frame complete including the cost of glass panes and including supply of all materials , labour T&P etc complete.
27
363
-
12 mm thick plaster with cement local sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto supper structure.
1093.95
170
-
Same as above but in proprtion 1:4 with cement and fine sand mortar on ceiling
162.54
206
-
Supply and fixing 3 mm glass strip in postion including supply of all material, labour T&P etc complete.
442.44
29
-
Supply and fix 40 mm thick sheesham wood part paneled and part glazed door and window shutters including supply and fixing of wooden cleats and stops and fixing and adjustment of hinges, bolts, locks, handles, springs and othr fitting but excluding painting and supply of fittings.
77.67
3538
-
Supply of oxidized iron fittings of 16.20 approved make for doors and window.
77.67
414
-
Mild steel or iron work in windows grills wrought to required form including cutting moulding and welding where necessary and also including supply of steel bolts nuts screws etc. and their fixing as required for proper completion of the work.
6.42
10250
-
Supply of galvanised mosquito proof heavy quality iron wire gauge 1.50 mm mesh or any other size over windows including supply of shisham wood pattens 50x12 mm necessary screws all materials labour T&P etc. required for 5.40 proper completion of the work
77.67
202
-
Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
151.02
178
-
White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
1156.41
95
-
Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
1156.41
145
-
Providing & Laying vitrified Floor Tiles (bell,kajaria or other standered make IS Code 15622) laid in 20mm thick cement mortar 1:4 including grouting of joints with cement and maching pigment etc.complete. size 600mmX600mm.
180
1091
-
Providing & Laying vitrified Wall Tiles (bell,kajaria or other standered make IS Code 15622) laid in 20mm thick cement mortar 1:3 including grouting of joints with cement and maching pigment etc.complete. size 300mmX300mm.
81
967
-
115 mm String or drip coarse of Ist. Class brick in 1:6 cement and coarse sand Mortar including Plastering, cutting drip notch as required and including supply of all material, labour T&P etc. required for proper completion of work.
108.48
382
-
Sand filling in plinth including supply of excavated earth from distance of eight km.
56.88
1006
-
Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete.
162.54
54
-
Supply and fixing fan hooks box type including supply of all material, labour T&P etc complete.
12
170
-
Provision for internal electrification including supply of ceiling fan,LED Bulb etc all material, labour T&P etc complete.
3
66348
-
Provision for water supply and sanitry works including supply of all material, labour T&P etc complete.
3
82935
-
Repeir work of OHT for Zone-3 (135 KL/20M)
-
-
-
Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surgace area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHT for repair and strengthning as per direction of engineer in-charge.
1
75000
-
dismantling old water proofing layer from inside and applying new water proof plaster with approved compound and cement mortar such that rectifying all kind of seepage/leakage from OHT including supply of all materials, labour T&P etc complete.
1
68100
-
Dismantling of old /existingCC flooring and disposal of debris upto 50 m including all labour T&P required complete.
78.5
88
-
40 mm thik 1:2:4 PCC floor with cement coarse sand and 20 mm stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thik base concrete consisting of cement,local sand and brick ballast in proportion of 1:6:12 including all materials, labour T&P required complete.
78.5
575
-
Painting of outer surface of OHT with wheather proof paint (like apex etc.) as per direction of engineer in-charge.
1
35000
-
Repeir work of OHT for Zone-4 (1600 KL/20M)
-
-
-
Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surgace area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHT for repair and strengthning as per direction of engineer in-charge.
1
135000
-
dismantling old water proofing layer from inside and applying new water proof plaster with approved compound and cement mortar such that rectifying all kind of seepage/leakage from OHT including supply of all materials, labour T&P etc complete.
1
93100
-
Dismantling of old /existingCC flooring and disposal of debris upto 50 m including all labour T&P required complete.
379.94
88
-
40 mm thik 1:2:4 PCC floor with cement coarse sand and 20 mm stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thik base concrete consisting of cement,local sand and brick ballast in proportion of 1:6:12 including all materials, labour T&P required complete.
379.94
575
-
Supply and fixing of Ventilator Jali at OHT including repairing of the ventilator and fixing the same properly including supply of all material labour, T&P etc. Required for proper completion of work.
1
4655
-
Supply and fixing of 20mm dia medium quality of G.I pipe relling with MS angle iron post of section 50x50x6 and 1.00 m height including grouting the angle iron post properly and fixing the pipe railing including supply of all material labour, T&P etc. Required for proper completion of work as per direction of Engineer incharge
-
-
-
Repairing of railing 20 mm medium quality
1
22344
-
Supply and fixing of following device of the OHT including repairing of the ventilator and fixing the same properly including supply of all material, labour,and fixing of all appliances in the cleats with screw or nales T&P etc. Required for proper completion of work
-
-
-
Water level indicator with complete marked scale
1
27930
-
Lightening Conductor with copper plate
1
9310
-
Painting the iron work in small area with one coat of anti corrosive primer coat and two coat of approved enemal paint including supply of all material labour T&Petc as per direction of engineer in-charge.
1
7448
-
Painting of outer surface of OHT with wheather proof paint (like apex etc.) as per direction of engineer in-charge.
1
140000
-
Repair work of Pump House cum chlorinating room for (zone-3 & zone-4)
-
-
-
Scrapping and dismantling of old plaster of pump house and disposal of debris to a distance of atleast 50 m from site
360
88
-
dismantling of old RB or RC or RCC floor of pump house staking of useful brick and disposal of debris to a distance of atleast 50 m from site
48
88
-
40 mm thick 1:2:4 plan cement concrete floor with cement,coarse sand and 20 mm gauge approved stone ballast laid in penel finished with 3 mm loating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cemnet,4 part of local sand and 8 part ist class brick ballast 4 cm gauge (1:4:8) and removing any over lapping of mortar at the joist of panel if an and giving them uniform finished including supply material, labour,T&P etc required for proper compltion of work.
76
575
-
Supply and fixing 3 mm glass strip in postion including supply of all material, labour T&P etc complete.
65
29
-
12 mm thick plaster with cement local sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto super structure.
360
171
-
White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
480
121
-
Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
480
95
-
Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
15
167
-
Provision for internal& external ", electric works including cost of all fixtures & cost of fittings, LED bulb, switch with conduet wiring fitting } pipes etc. & supply of all materials labour T&P etc. required for proper completion of the work & including cost of earthing pits and connection etc. complete. (for 3 nos PH)
4
3258
-
Rain water down pipe 100 mm dia AC/PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.
15
434
-
E&M works
-
-
-
CONSTRUCTION OF NEW TUBEWELL for Zone 1 & 2
-
-
-
Transportation, Erection, Dismantling of Rig Machine and its T&P
4
31356
-
Transportation, Erection, Dismantling of Compressor 250/350 PSI
4
27173
-
Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test
4
43062
-
Supply of Tubewell Assembly
-
-
-
M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect.
-
-
-
(Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
-
-
-
300 mm dia M.S. Pipe
144
5168
-
200 mm dia M.S. Plain/slotted
360
3575
-
PEA-GRAVEL (As per IS:4097)
-
-
-
1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell
160
4797
-
Drilling of bore by rig machine As Per IS :2800(Part I & II):
-
-
-
Drilling of bore by 600 mm dia bit GL to 40 mt. BGL.
160
2197
-
Drilling of bore by 500 mm dia bit from 40 mt GL to 100 mt. BGL.
240
1851
-
Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
160
2168
-
Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
-
-
-
Lowering of 300 mm dia M.S. Housing pipe from GL to 36 m.BGL
144
355
-
Lowering of 200 mm dia M.S. Plain/slotted pipe 36 m. BGL to 100 m. BGL
256
239
-
Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
104
297
-
Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.
-
-
-
Development and testing of tube well by Air Compressor.
200
2782
-
Development and testing of tube Well O.P.Unit to yield sand free Discharge.
400
748
-
Chemical and Bacteriological
-
-
-
test (Analysis of water sample)
4
2398
-
Logging of borehole by departmental/approved electric logger
4
17271
-
SITC OF PUMPING PLANT AND STABILIZER FOR ZONE 1 & 2
-
-
-
Supply, Installation, testing and Commissioning of 1250 lpm , 52 mtr Head For Zone-1 (2 nos) & 1200 lpm , 56 mtr Head For Zone-2 (2 nos) Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
4
259446
-
SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves
8
119937
-
Soft starter for above 25 HP pumpset with RS 485 Port-400V Class for above pumpset
4
81557
-
SITC of 40 kva stabilizer for above pumpset
4
168872
-
SITC of equipments for the items as given below :
-
-
-
Pressure transmitter
4
47975
-
Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019
4
13385
-
Coloumn Pipe 5 mtr long
20
3118
-
SITC OF SCADA /AUTOMATION WORK OF NEW PUMPING PLANT OF ZONE 1 & 2
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
4
263862
-
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
4
28785
-
CE/UL certifeid Intelligent Smart Energy Meter
4
23987
-
CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
4
143925
-
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
4
129532
-
CE/UL certifeid Surge Protecter for control panel.
4
14392
-
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
4
28785
-
Complete cabling including power cables of all equipment.
4
57570
-
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
4
115140
-
Installation, commissioning & testing trial for tubewell
4
9595
-
SITC OF AUTOMATIC CHLORINATION SYSTEM OF ZONE 1 & 2
-
-
-
Automatic Chlorination System compatible to SCADA system
4
71962
-
SITC OF E&M WORK AT NEW OHT OF ZONE 1 & 2
-
-
-
CE/UL certifeid Radar Type level transmitter for OHT.
2
115140
-
Actuator with new metal sheeted sluice valve suitable to OHT outlet dia.
2
326230
-
CE/UL certifeid Electromagnetic Flowmeter suitable for OHT outlet dia.
2
402990
-
Installation, commissioning & testing trial for OHT
2
9595
-
SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
2
414820
-
Lighting at Water works campus with solar panel and LED light of 1 set
2
28785
-
SITC OF STABILIZER AND OTHER REQUIRED E&M EQUIPMENTS OF ZONE 3
-
-
-
Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
1
57570
-
SITC of 25 kva stabilizer for above pumpset
1
122816
-
Pressure transmitter
1
47975
-
Internal electrification of pump house
1
19190
-
CE/UL certifeid Actuator with new metal sheeted valves
2
119937
-
SITC OF AUTOMATIC CHLORINATION SYSTEM OF ZONE 3
-
-
-
Automatic Chlorination System compatible to SCADA system
1
71962
-
SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANT OF ZONE 3
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
1
263862
-
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
1
28785
-
CE/UL certifeid Intelligent Smart Energy Meter
1
23987
-
CE/UL Certifeid Electromagnetic Flow Meter of suitable size
1
127613
-
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
1
129532
-
CE/UL certifeid Surge Protecter for control panel.
1
14392
-
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
1
28785
-
Complete cabling including power cables of all equipment.
1
57570
-
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
1
115140
-
Installation, commissioning & testing trial for tubewell
1
9595
-
SITC OF EXISTING OHT AUTOMATION SYSTEM AT ZONE 3
-
-
-
CE/UL certifeid Radar Type level transmitter for OHT.
1
115140
-
Actuator of 200 mm dia size with metal sheeted sluice valve
1
143925
-
CE/UL certifeid Electromagnetic Flowmeter 200 mm dia size
1
182305
-
Installation, commissioning & testing trial for OHT
1
9595
-
SITC of UPS 5 kva single phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
1
287850
-
Lighting at Water works campus with solar panel and LED light of 1 set
1
28785
-
SITC OF CHLORINE ANALYZER FOR ZONE 3 OHT
-
-
-
Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm) b) Analyzer with RS 485 O/P
1
261943
-
CONSTRUCTION OF REBORE TUBEWELL (300x200mm dia) FOR ZONE 4
-
-
-
Transportation, Erection, Dismantling of Rig Machine and its T&P
1
31356
-
Transportation, Erection, Dismantling of Compressor 250/350 PSI
1
27173
-
Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test
1
43062
-
Supply of Tubewell Assembly
-
-
-
M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect.
-
-
-
(Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
-
-
-
300 mm dia M.S. Pipe
36
5168
-
200 mm dia M.S. Plain/slotted
90
3575
-
PEA-GRAVEL (As per IS:4097)
-
-
-
1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell
40
4797
-
Drilling of bore by rig machine As Per IS :2800(Part I & II):
-
-
-
Drilling of bore by 600 mm dia bit GL to 40 mt. BGL.
40
2197
-
Drilling of bore by 500 mm dia bit from 40 mt GL to 100 mt. BGL.
60
1851
-
Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
40
2168
-
Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
-
-
-
Lowering of 300 mm dia M.S. Housing pipe from GL to 36 m.BGL
36
355
-
Lowering of 200 mm dia M.S. Plain/slotted pipe 36 m. BGL to 100 m. BGL
64
239
-
Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
26
297
-
Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.
-
-
-
Development and testing of tube well by Air Compressor.
50
2782
-
Development and testing of tube Well O.P.Unit to yield sand free Discharge.
100
748
-
Chemical and Bacteriological
-
-
-
test (Analysis of water sample)
1
2398
-
Logging of borehole by departmental/approved electric logger
1
17271
-
SITC OF PUMPING PLANT AND STABILIZER FOR ZONE 4
-
-
-
Supply, Installation, testing and Commissioning of 2000 lpm , 52 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
1
294247
-
SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves
2
119937
-
Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
1
95950
-
SITC of 60 KVA stabilizer for above pumpset
1
207252
-
SITC of equipments for the items as given below :
-
-
-
Pressure transmitter
1
47975
-
Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019
1
13385
-
Coloumn Pipe 5 mtr long
5
3118
-
SITC OF SCADA /AUTOMATION WORK OF REBORE PUMPING PLANT FOR ZONE 4
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
1
263862
-
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
1
28785
-
CE/UL certifeid Intelligent Smart Energy Meter
1
23987
-
CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
1
143925
-
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
1
129532
-
CE/UL certifeid Surge Protecter for control panel.
1
14392
-
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
1
28785
-
Complete cabling including power cables of all equipment.
1
57570
-
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
1
115140
-
Installation, commissioning & testing trial for tubewell
1
9595
-
SITC OF AUTOMATIC CHLORINATION SYSTEM FOR REBORE TUBEWELL OF ZONE 4
-
-
-
Automatic Chlorination System compatible to SCADA system
1
71962
-
SITC OF EXISTING OHT AUTOMATION SYSTEM AT ZONE-4
-
-
-
CE/UL certifeid Radar Type level transmitter for OHT.
1
115140
-
Actuator of 400 mm dia size with metal sheeted sluice valve
1
326230
-
CE/UL certifeid Electromagnetic Flowmeter 400 mm size
1
402990
-
Installation, commissioning & testing trial for OHT
1
9595
-
SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
1
414820
-
Lighting at Water works campus with solar panel and LED light of 1 set
1
28785
-
SITC OF STABILIZER AND OTHER REQUIRED E&M EQUIPMENTS AT EXISTING TUBEWELL OF ZONE 4
-
-
-
Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
1
95950
-
SITC of 60 kva stabilizer
1
207252
-
Pressure transmitter
1
47975
-
Internal electrification of pump house
1
19190
-
CE/UL certifeid Actuator with new metal sheeted valves
2
119937
-
SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANT FOR ZONE 4
-
-
-
CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
1
263862
-
GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
1
28785
-
CE/UL certifeid Intelligent Smart Energy Meter
1
23987
-
CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
1
143925
-
auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
1
129532
-
CE/UL certifeid Surge Protecter for control panel.
1
14392
-
CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
1
28785
-
Complete cabling including power cables of all equipment.
1
57570
-
control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
1
115140
-
Installation, commissioning & testing trial for tubewell
1
9595
-
SITC OF AUTOMATIC CHLORINATION SYSTEM FOR EXISTING TUBEWELL OF ZONE 4
-
-
-
Automatic Chlorination System compatible to SCADA system
1
71962
-
SITC OF CHLORINE ANALYZER FOR ZONE 1, 2 & 4 OHT
-
-
-
Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm) b) Analyzer with RS 485 O/P
3
261943
-
TRIAL RUN OF THREE MONTHS FOR ALL ZONE
-
-
-
Three months trial run of electro mechanical work with Expenditure on hypo chloride solution,Chaukidar, watch & ward etc for whole scheme
1
838860
-
SITC OF ELECTRO MECHANICAL EQUIPMENTS AT LOCAL CONTROL STATION
-
-
-
CE/UL & BIS Certified industrial grade LARGE SIZE LED MONITOR with lates configuration as per specification.
1
215928
-
Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents.
1
80973
-
CE/UL Certified 3 KVA UPS with batteries as per spec mentioned in tachnical bid documents.( 1 No.For LCS and 4 Nos for tubewells which are not constructed in OHT Campus)
5
134955
-
Full development version of required TAGS SCADA Software with coustomization of software for LCS as per spec mentioned in tachnical bid documents.
1
359880
-
GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP.
1
35988
-
CE/UL certified Firewall for network protection.
1
161946
-
Surge protector for eternet communication protection.
1
13495
-
industrial grade Ethernet Switch.
1
13495
-
canon/hp Laser printer1018 or equivalent
1
26991
-
Installation,Commissioning ,testing including required furniture,internal wiring,PVC panelling of walls/false ceiling work and Split A/C .
1
44985
-
Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days
2
17994
-
Trial run charges for LCS for 3 months
1
40486
-
Granting permission Charges for crossing of Moradabad-Bareilly Railway line from railway
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%