UP Jal Nigam Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search &amp; bid for etender UP.

UP Jal Nigam - UPJN Tender

Works
Civil And Construction
Civil Works Others
Pipe Line Project
Water Storage And Supply
Eprocure
Opening Date16 Sep 2024
Closing Date4 Oct 2024
Tender Amount₹ 32,94,22,000 
Notes
Download

Costs

Summary

Supply Of All Materials, Labour For Construction Of Oht, Cwr, Ph, Sq, Bw, Distribution System, Rm, Tw With Scada Automation As Per Specifications In Tender Document Complete In All Respect Hardoi Npp Reorganization Wss Under Amrut 2.0

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Structural Design, supply of all material, labour, T&P etc. required for construction of Ractangular, R.C.C Clear Water Reservoir cum pump house to accomadate 3 no of pumping plants and other appurtenant work etc as per IS 3370-1965 (Part I to IV) or its latest amendments. Structural design and drawing must be vetted by any IIT (Indian Institute of Technology) of India. The design will be based on all relevant technical specification as given herewith in bid document. A separate room of not less than 3.00x3.00m in size should be provided by the side of the pump house for record keeping. Provision for fixing of inlet pipe equivalent to no of TWs to be connected to CWR and over flow pipe of required dia with all necessary fittings such as sluice valve, NRV and their chamber as per design and specification and place decided by engineer in charge. The floor of pump house and top of CWR and the room provided at the side of pump house should be 25mm KOTA stone flooring. The size of CWR pump house should be such that all the motor pump starters O.C.B. cables, water level indicator all piping arrangement, reflex valve sluice valve etc may be accommodated in the pump house. Architectural view and GA drawing of pump house shall be approved by department before execution of work. The pump house will be constructed with all appurtenant work such as fixing of door window grill shutter and collapsible door if required suitable gantry beam with rail electronic water level indicator as given in detail specification including necessary glazed door, Two coat apex weather coat (Asian, Berger etc.) painting over one coat primer of approved colour over wall putty two coat (Birla, JK, Asian, Berger etc.) 1 m wide RCC stair case with stainless steel hand railing to go inside reservoir, sump below the pump house area, Railing - 20 mm G.I. Pipe class - B in three rows with MS angle iron post 50x50x6 in one metre distance over the R.C.C slab of reservoir, Granular texture finish on exterior surface of pump house, gantry beam, food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, of capacity mentioned as under: Note : The bid prices of Clear Water Reservoir / Pumping Stations are to be submitted considering the depth of excavation may extend up to 6 m BGL, layout as ground level of over head tank consider from 50 cm above than near of road surface to be finalized by the engineer in charge.

-

-

-

... More
Clear Water Reservoir - 500 KL at Zone VI

1

-

6515964.5

... More
Demolishing of existing OHT in Zone VI Demolishing of existing over head tank capacity 2000 KL/ 18 M Staging by manually / mechanical process with proper barricating and necessary safety arrangements including stacking of serviceable materials i.e. pipes, steel, sluice valve etc. at a suitable & secured place with own expense of contractor and disposal of unserviceable materials/ scraps within distance of 8 km distance in municipal limit as per direction of engineer in charge including supply of all machinery, T&P, labour etc. required for proper completion of the work.

1513.01

-

1576.55

... More
Design of distribution network and supply of following dia of high density polyethelene Pipes (HDPE (PN-6)/PE-100), conforming to IS 4984 / 14151 / 12786 / 13488 in coils/ standard lengths with nesessary jointing material like electro-fusion coupler, flanged joint, including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading & stacking the same in covered shade duly protecting from sunrays & rains including crossing of upto 1.00 m vide nala/drain etc. with Carting, lowering, laying and requisite specials to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge. It includes provision for making of alignment on city roads, making trial pits to investigate location of various under grounds services like telephone cables, electric cable, existing pipe lines and sewer lines etc. arrangements for diversion of traffic and associated works etc. with supply of all necessary equipment, materials, labour and T&P etc. complete required for completion of work.The trenches shall be properly barricaded and fenced off wherever necessary. Red flags and caution boards during day and red lights during night shall be displayed so as to avoid any accidents. Note: Jointing between HDPE pipes and specials shall be done as per the latest IS: 7634 part II. Only Bar coded electro-fusion machine (automatically readable) that can read the bar code of the fittings automatically shall be used for jointing of HDPE pipe/fittings. Note: 1. Contractor will ensure to supply of 10 No. set of electrofusion jointing machine including cutting & peeling tool and other misc. equipments. 2. Contractor will provide 04 No. set of hydro testing machine of 20 kg/cm² capacity including 02 Nos. tractor with water tanker will also be part of this set. 3. Contractor will provide minimum 06 tractor trolley for disposal of surplus earth. 4. Contractor will provide 04 No. of tractor with water tanker for sprinkling of water on trenches and 5 No. Anti Smoke Gun to protect the dust particals entering in the atmosphere which may be cause of increase of AQI of construction area.

-

-

-

... More
HDPE Pipe 90 mm dia

22158

-

255.39

... More
HDPE Pipe 110 mm dia

33172

-

350.72

... More
HDPE Pipe 140 mm dia

3376

-

532.74

... More
HDPE Pipe 160 mm dia

939

-

680.84

... More
Design of distribution network and supply of following dia of ISI marked S & S centrifugally cast (Spun) ductile iron pipes (Class K-7) as per IS : 8329-2000 suitable for push on jointing by compatible rubber gasket including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading, stacking, including crossing of upto 1.00 m vide nala/drain etc. Carting, lowering, laying and jointing with SBR ruber gaskets D.I. K-7 pipes of following dia & pressure including all specials, to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge. It includes provision for making of alignment on city roads, making trial pits to investigate location of various under grounds services like telephone cables, electric cable, existing pipe lines and sewer lines etc. arrangements for diversion of traffic and associated works etc. with supply of all necessary equipment, materials, labour and T&P etc. complete required for completion of work. The trenches shall be properly barricaded and fenced off wherever necessary. Red flags and caution boards during day and red lights during night shall be displayed so as to avoid any accidents. Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS- 12820.

-

-

-

... More
DI Pipe (Class K-7) 200 mm dia

2186

-

2337.21

... More
DI Pipe (Class K-7) 250 mm dia

272

-

3073.85

... More
DI Pipe (Class K-7) 300 mm dia

694

-

3947.28

... More
Risingmain :- Supply of following dia of ISI marked S & S Centrifugally Cast (Spun) Ductile Iron pipes (Class K-9) as per IS : 8329-2000 suitable for Push on jointing by compatible rubber gasket including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading, stacking, including crossing of upto 1.00 m vide nala/drain etc. Carting, lowering, laying and jointing with SBR ruber gaskets D.I. K-9 pipes of following dia & pressure including all specials, to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge. It includes provision for making of alignment on city roads, making trial pits to investigate location of various under grounds services like telephone cables, electric cable, existing pipe lines and sewer lines etc. arrangements for diversion of traffic and associated works etc. with supply of all necessary equipment, materials, labour and T&P etc. complete required for completion of work. The trenches shall be properly barricaded and fenced off wherever necessary. Red flags and caution boards during day and red lights during night shall be displayed so as to avoid any accidents. Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS- 12820.

-

-

-

... More
DI Pipe (Class K-9) 200 mm dia

2910

-

2780.5

... More
DI Pipe (Class K-9) 250 mm dia

40

-

3732.46

... More
Earth work in excavation for pipeline trenches in all type of soil with including lift upto 1.5 m and lead upto 50M, refilling the soil as required, including depositing in layers not exceeding 150mm, watering and compaction to 95% of the Standard Proctor density, level dressing, including supply of all labour, T&P etc. required for proper completion of the work. Including disposal of surplus earth up to 8 Km as instucted by engineer in charge.

52410.28

-

206.9

... More
Supply of following sizes of DI D/F sluice valve/scour valve with cap. Class-10 (working pressure 10kg/sqcm) confirming to IS:14846:2000 at Site of work, carting, lowering in already prepared trenches and fixing them in position, making flange joints including supply of all materials such as bolts, nuts, rubber insertion, white lead, testing etc. complete including all other necessary fitting and specials as per direction of Engineer in charge.

-

-

-

... More
80 mm dia

9

-

12082.83

... More
100 mm dia

11

-

13713.56

... More
125 mm dia

12

-

21042.18

... More
150 mm dia

4

-

21521.92

... More
200 mm dia

11

-

32627.02

... More
250 mm dia

9

-

56053.31

... More
Scoure valve

-

-

-

... More
80 mm dia

5

-

12082.83

... More
Supply of following size Kinetic Double Air Valves as per IS : 14845 at site of work, carting, fixing in position including boring and threading in the main etc.complete including cost of boring the water main clamp with socket, G.I. medium duty, nipple and subsequent back filling etc complete.

-

-

-

4

-

20732.25

... More
Supply of 80 mm dia size flanged type fire hydrant site of works of 80mm dia size flanged fire hydrant to site of work, fixing them in position for flanged joints s instucted by engineer in charge.

4

-

24223.04

... More
Supply of all materials, labour, T&P etc. and construction of following chambers as per departmental type drawing and design including supply & fixing of RCC cover etc. complete including all other necessary fitting as per direction of Engineer in charge.

-

-

-

... More
Surface box type

9

-

4797.5

... More
Masonry type

52

-

29744.5

... More
For air valve

4

-

5181.3

... More
For fire Hydrants

4

-

6620.55

... More
Construction of RCC thrusht block in 1:1.5:3 with cement, coarse sand and 20 mm guage stone gtit at bends of pipe including supply of all materials, labour, T&P etc. required for proper completion of work

7.05

-

12323.43

... More
Mild steel TMT.Fe-500D in plain work such as reinforced concrete or reinforced brick work (for construction of RCC thrusht block) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and othorised overlapping shall be measured upto floor two level.

5.53

-

8859

... More
Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 8km. and also including temporary reinstatement/motorable of road by old materials.

-

-

-

... More
B.O.E. road

2494.34

-

81.8

... More
Bituminous road

9991.71

-

159.04

... More
C.C. road

14846

-

308.15

... More
Interlocking road

17571.16

-

142.91

... More
Permanent re-instatement of following type of road surfaces after laying of pipe line including supply of all materials, labour, T&P etc. required for completion of work. It also includes necessary excavation required for preparation of trench for reinstatement of road, disposal of surplus unserviceable material, watering, ramming, cleaning of surface for proper completion of the work as per directions of engineer-in-charge.

-

-

-

... More
Brick on edge with bricks (60 % New & 40% Old) laid dry, joints filled with local sand including preparation of base to proper slope and its ramming, spreading a layer of 10 cm depth of local sand over the subgrade and including supply of all materials, labour, T&P etc. required for proper complete of the work.

997.73

-

336.3

... More
Brick on edge with bricks (100 % New) laid dry, joints filled with local sand including preparation of base to proper slope and its ramming, spreading a layer of 10 cm depth of local sand over the subgrade and including supply of all materials, labour, T&P etc. required for proper complete of the work.

1496.61

-

550.7

... More
Re-instatement of bitumen road as per specification including supply of all materials, labour, T&P etc. required for proper completion of work. To achive the required quality of work, graded material in appropriate quantity shall be supplied by the contractor. This material shall be used in filling of trenches only after succesfully testing of material with relevent IS code. Sample collection of GSB material, BM and SDBC will be done as required by engineer incharge.

5679.08

-

2007.06

... More
Re-instatement of bitumen road as per specification including supply of all materials, labour, T&P etc. required for proper completion of work. To achive the required quality of work, graded material in appropriate quantity shall be supplied by the contractor. This material shall be used in filling of trenches only after succesfully testing of material with relevent IS code. Sample collection of GSB material, BM and SDBC will be done as required by engineer incharge. (PWD Road)

4312.63

-

4250

... More
Surface layer painting in Bituminous road including supply of all materials, labour, T&P etc. required for proper complete of the work as per directions of engineer-in-charge.

25878.76

-

635.42

... More
Providing and laying design mix cement concrete 100 mm thick of M-20 grade, in roads, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, mixing with weigh batcher, laying at site, spreading and mechanically compacting by using needle and surface vibrators, levelling to required slope / camber, finishing with required texture over 100 mm thick base of GSB.

14846

-

1733.39

... More
Providing and laying of 80 mm thick M-30 grade C.C. rubber moulded (60% new and 40% old tiles) interlocking paver tiles over 30 mm thick fine sand bed and also including earth wotk in excavation in proper slope & camber including all materials, labour, T&P required for proper completion of work.

10542.69

-

1071.2

... More
Providing and laying of 80 mm thick M-30 grade C.C. rubber moulded (100% new tiles) interlocking paver tiles over 30 mm thick fine sand bed and also including earth wotk in excavation in proper slope & camber including all materials, labour, T&P required for proper completion of work.

7028.47

-

1536.13

... More
Provision for crossing of nala, road, culvert including supply of casing with MS / DI pipe and specials, laying, jointing etc., T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain, complete as per direction / approval of Engineer in charge. up to 1.00 M

97

-

9042.14

... More
Crossing of Culvert/ nala upto 3.5M width using casing of pipes restoring than drain original condition for laying pipe line including supply and materials labour, T&P etc. complete

22

-

11514

... More
Crossing of Culvert/ nala from 3.5M to 7.0M width using casing of pipes restoring than drain original condition for laying pipe line including supply and materials labour, T&P etc. complete

6

-

28785

... More
Crossing of Road upto 3.5M for laying pipe line including supply and materials labour, T&P etc. complete.

46

-

17271

... More
Crossing of Road from 3.5M to 7.0 M for laying pipe line including supply and materials labour, T&P etc. complete

12

-

41258

... More
Trenchless Crossing :- Survey site Investigation Planning design Drawings as per State Road manual and vetting / checked from State Road Divisional Office and taking NOC for trenchless crossing of National highway road and Railway track(crossing length 15m to 25m ) Road for of required dia Rising main pipe with casing pipe as required for proper completion of work required size of MS casing pipe as per drawing and as per (IS:3589 & made from confining to IS:2062) with 750 Micron PU coating internally and 250 micron anti corrosive bituminous paint externally by trenchless technology method at an average depth 3.60 mtr from normal ground level up to top of casing pipe including excavation & filling of Pit Dewatering arrangement Supporting system for soil also including supply and fixing of 2 no Sluice valve ISI Mark construction of sluice valve chamber etc. all complete work including supply & fixing specials in carrier pipe over main pipe as per specification given in the bid documents including supply of all materials labour T&P etc. for proper completion of work as per instruction of Engineer (charges include for all type of NOC/Approval providing by concern department)

-

-

-

... More
National Highway road crossing (upto 350 mm dia)

104

-

36373.69

... More
Railway line crossing (upto 350 mm dia)

60

-

47073.07

... More
Making interconnection in 90 to 500 mm dia AC/ P.V.C./ HDPE/DI pipes including supply, carting of specials, lowering them into tranches, cutting, fixing them in proper alignment and jointing including balling out of water, necessary excavation for connection and proper barricading including supply of all machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge.

-

-

-

... More
400 mm to 400 mm

1

-

15210

... More
400 mm to 160 mm

1

-

14550

... More
400 mm to 90 mm

9

-

14285

... More
350 mm to 250 mm

2

-

12100

... More
350 mm to 160 mm

1

-

12010

... More
350 mm to 90 mm

3

-

11650

... More
300 mm to 90 mm

4

-

10950

... More
250 mm to 200 mm

1

-

10430

... More
250 mm to 90 mm

8

-

10005

... More
200 mm to 140 mm

1

-

9235

... More
200 mm to 90 mm

7

-

9075

... More
140 mm to 90 mm

12

-

7225

... More
110 mm to 90 mm

6

-

4355

... More
90 mm to 90 mm

18

-

4115

... More
Construction of drinking water house connection with distribution mains (HDPE, AC, DI, PVC) including dismantling in all type of road, supply and carting of material (20 mm HDPE pipe PE-80/PN-16 from trench to outer wall/boundary wall, 15 mm GI pipe class-B average length 3 m, 15 mm GI elbow including HDPE electrofusion shaddle for HDPE pipe and DI strap saddle for DI pipe shall be used.1 No. brass tap shall be fixed inside the house of consumer as per IS 8931 and 8934, All 20 mm GI union, 20 mm, 1 No. 15 mm brass ferrule and other GI fitting and specials shall be according to IS 12183 & IS2065. , FTA & MTA and other compression fittings of 100% pure virgin (Georgefisher, kimplas) shall be provided. HDPE shaddle shall be fixed with electrofusion method. All fitting of water supply house connections shall be fixed them into trenches, fixing them in proper alignment and jointing and making hols in walls for crossing the GI pipe, fixing of GI pipe with minimum 3 hooks & repairing of hold after connection, necessary excavation for connection with temporary reinstatement of all type of road including supply of all machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge. For New pipe Line

-

-

-

... More
For 90 mm to 110 mm dia

4260

-

3617.17

... More
For 140 mm to 160 mm dia

715

-

3799.48

... More
For 200 mm to 250 mm dia

670

-

3991.38

... More
For 250 mm to 300 mm dia

275

-

4087.33

... More
For 350 mm to 500 mm dia

70

-

4212.06

... More
For Existing pipe Line

-

-

-

... More
For 90 mm to 110 mm dia

2345

-

3768.94

... More
For 140 mm to 160 mm dia

205

-

3951.24

... More
For 200 mm to 250 mm dia

210

-

4143.14

... More
For 250 mm to 300 mm dia

102

-

4239.09

... More
For 350 mm to 500 mm dia

40

-

4363.83

... More
Permanent re-instatement of following type of road surfaces after laying of pipe line (for New & Existing house connection work) including supply of all materials, labour, T&P etc. required for completion of work. It also includes necessary excavation required for preparation of trench for reinstatement of road, disposal of surplus unserviceable material, watering, ramming, cleaning of surface for proper completion of the work as per directions of engineer-in-charge.

-

-

-

... More
Brick on edge with bricks (60 % New & 40% Old) laid dry, joints filled with local sand including preparation of base to proper slope and its ramming, spreading a layer of 10 cm depth of local sand over the subgrade and including supply of all materials, labour, T&P etc. required for proper complete of the work.

960.34

-

336.3

... More
Re-instatement of bitumen road as per specification including supply of all materials, labour, T&P etc. required for proper completion of work. To achive the required quality of work, graded material in appropriate quantity shall be supplied by the contractor. This material shall be used in filling of trenches only after succesfully testing of material with relevent IS code. Sample collection of GSB material, BM and SDBC will be done as required by engineer incharge.

1440.5

-

2007.06

... More
Providing and laying design mix cement concrete 100 mm thick of M-20 grade, in roads, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, mixing with weigh batcher, laying at site, spreading and mechanically compacting by using needle and surface vibrators, levelling to required slope / camber, finishing with required texture over 100 mm thick base of GSB.

1600.56

-

1733.39

... More
Providing and laying of 80 mm thick M-30 grade C.C. rubber moulded (60% new and 40% old tiles) interlocking paver tiles over 30 mm thick fine sand bed and also including earth wotk in excavation in proper slope & camber including all materials, labour, T&P required for proper completion of work.

4001.4

-

1071.2

... More
Repairing of leakages in existing pipe (HDPE, AC, DI, PVC) line including dismantling in all types of road, excavation of trench, bailing out of water repairing the joint, backfilling of earth and Permanent reinstatement of all types road in pipes of different dia including supply of all material, specials, machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge.

-

-

-

... More
For 90 mm to 200 mm dia

395

-

3089

... More
For 250 mm to 500 mm dia

55

-

5365

... More
Supply and fixing of end cap (HDPE, AC, DI, PVC) & fixing of Sluice valve for dividing into separate zone including excavation of pit, bailing out of water, fixing the end cap and then again refilling the earth in the pit including supply of all materials, specials, machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge.

-

-

-

... More
For 90 mm to 200 mm dia

500

-

1487

... More
For 250 mm to 500 mm dia

100

-

1602

... More
CONSTRUCTION OF PUMP HOUSE CUM CHLORONOME 4 Nos. Supply of all material T&P etc. required for construction of Pump House 04 Nos. as per typical drawing and design of department. The structural design of pump house shall be submitted by the contractor on the basis of safe bearing capacity of soil. The plinth level of Pump House shall be 60cm above from finished GL of the campus. The following criteria shall be taken in consideration for structural design of Pump House including campus cleaning, removal of debries, bush cutting and disposal within municipal limt and filling ogf earth if required as per direction of engineer in charge. Note - Plinth should be made above 60 cm above from nearest highest service / link road. Excavation of earth for foundation in ordinary soil (loam, clay or sand) including lift upto 1.5M and lead upto 50M including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches and plinth, disposal of surplus earth upto a distance to 50M from the center of the foundation trenches.

100

-

167.29

... More
Concrete with cement, coarse sand and 40 mm nominal size approved stone ballast in proportion of 1:4:8 in foundations and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

12

-

6810.58

... More
Ist class brick work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

72

-

5758.33

... More
40 mm thick D.P.C. in cement concrete consisting of 1:2:4 cement, coarse sand and graded stone aggregate 12.5 mm nominal size(10-12.5 mm) and including water proofing(ISI Mark) compound in the proportion including supply of all materials, labour, T&P etc. required for proper completion of the work.

20

-

368.35

... More
12 mm thick plaster in 1:4 cement and coarse sand mortar for plinth shall be done on both side of brick work inner side 15 cm below plinth and outside 15 cm below GL.

83.4

-

196.14

... More
First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work(thickness of wall not be less than one brick).

56

-

6303.03

... More
Supply and fixing of M.S. angle iron 40x40x5mm door chaukhat including supply and fixing of four hinges with one coat of red oxidised primer.

-

-

-

... More
1.20 x 2.10 M 1.00 x 2.10 M

1.8

-

8350.91

... More
Supply and fixing of the Z-section M.S. window with grill as per departmental type drawing including supply and fitting of handle, locking arrangement etc. with one coat of red oxidised primer.

9

-

9033.6

... More
Supply and fixing of cement jali 45x30 cm at 15 cm above floor level in the chloronome for proper ventilation.

8

-

479.75

... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work wrought to required shape as necessary including supply of all steel and its bending and binding with binding wire necessary over lapping as required etc. complete.

16

-

8859

... More
R.C.C. work (with use of C.C. mixer) in proportion of 1:1.5:3 cement, coarse sand and 20mm nominal size (10mm-1 part & 20 mm - 2 part) stone grit with proper finishing including supply of all materials, labour, T&P and Kachcha plaster on wooden plank shuttering or ply shuttering excluding cost of steel but including binding the same with 24 B.W.G. binding wire.

-

-

-

... More
Lintels

3

-

10985.72

1

-

12513.46

... More
Sun shades & Slab

19.2

-

12513.46

... More
Cement concrete with cement, coarse sand & 20 mm nominal size(10-20 mm) stone grit in proportion 1:2:4 including supply of all materials, labour, T&P etc., required for proper completion of the work, in bed block of girder, hold fast and girder fixing and in flooring of bypass chamber, window sills etc.

2

-

6810.58

... More
Supply and fixing in position rolled steel joist ISMB of 200mm x 100mm size and 3.40M long including supply of all labour, T&P etc. required for proper completion of the work.

3.44

-

9033.6

... More
150 mm thick local sand filling under floor including supply of local sand, filling, watering and ramming etc. complete for proper completion of the work.

11

-

795.92

... More
40mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20 mm nominal size(10-20 mm) stone grit laid in panel and finished with 3mm floating coat of neat cement including / over 75mm thick base concrete consisting of cement, coarse sand and stone ballast 40mm nominal size(20-40 mm) in proportion of 1:4:8 and removing all over lapping of mortar at the joints of the panels if any and giving them uniform finishing including supply of all materials, labour, T&P etc. required for proper completion of the work

80

-

597.58

... More
12mm thick plaster above plinth in 1:6 cement and Banda(Ken)/ Hamirpur(Betva) sand over brick work, minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of the work.

680

-

155.21

... More
6 mm thick plaster on ceiling, sunshades and projected slab of R.C.C. work in 1:4 cement and Banda/Hamirpur fine sand F.M. not less than 1.25 mm including supply of all materials, labour, T&P etc. complete for proper completion of the work.

200

-

196.14

... More
20 mm thick plaster in dado or skirting with cement mortar in proportion of 1:2 cement and coarse sand with finishing of 3 mm thick floating coat of neat cement including supply of all materials, labour, T&P etc. required for completion of the work.

14

-

510.32

... More
20mm wide drip course with cement mortar in proportion of 1:3 with cement and Banda/Hamirpur coarse sand.

60

-

36.46

... More
Providing 45 cm wide and 25mm thick cc apron of 1:2:4 cement, coarse sand and 10-20mm stone grit over 75mm thick base concrete in 1:4:8 cement, coarse sand and 40mm nominal size(20mm-2 part & 40 mm-6 part) stone ballast with finishing of 3 mm thick floating coat of neat cement also including supply of all materials,labour,T&P etc. complete.

40

-

886.02

... More
Construction of 100mm wide cc drain as per departmental drawing in proportion of 1:2:4 cement, coarse sand and 20 mm nominal(10 mm - 1 part & 20 mm - 3 part) stone grit over 100 mm base concrete in proportion of 1:4:8 cement, coarse sand and 40mm nominal(20 mm - 2 part & 40 mm - 6 part) stone ballast with finishing of 3 mm thick floating coat of neat cement also including supply of all materials,labour,T&P etc. complete.

100

-

959.2

... More
Brick Coba :- (a)Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 Kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the R.C.C. slab including adjointing walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5( 1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of juctions of walls and slabs (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortarof mix 1:4(1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm squared 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operation to be done in order and as directed and specified by the Engineer-in-charge: With average thickness of 120 mm and minimum thickness at khurra as 65 mm

74.8

-

1461.27

... More
The outer surface of wall finish with two coat of weather coat- All Guard, Apex-Ultima (premium acrylic smooth exterior paint with silicon additive) with one coat of priming coat of exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

400

-

274.61

... More
The inner finish should be two coat of oil bound distemper Ist quality such as Bison distemper, tractor distemper with one coat of priming coat over smooth base of cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

360

-

168.79

... More
Supply and fixing of ISI marked waterproof flush door shutters of required size of 35 mm thick including heavy size steel fitting e.g. tower bolt, sliding bolt, handle etc., lab our, T&P etc.complete.

18.4

-

2686.6

... More
Supply and fixing of 4 mm thick glass panes in panel of Z-section window shutters including supply of M.S. clip and I.S.I. mark putty etc. as required for proper completion of the work.

24

-

978.5

... More
Supply and fixing of rain water pipe P.V.C. 110mm 6 Kg/Cm2(2 Nos.) with bend and clamp etc. all complete.

30

-

624.63

... More
Painting or varnishing of new iron work in small areas or new wood work with one coat of priming and two coats of synthetic enamel paint or varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.

100

-

94.63

... More
Provide 3mm thick floating coat of neat cement over the previously made plaster on by pass chamber & over plinth plaster etc.

200

-

155.21

... More
Providing 15cm long 25 mm dia P.V.C. Pipe with cutting at ends and fixing the same with cement and coarse sand mortar in sunshades.

24

-

49.89

... More
Supply and fixing 3 mm thick glass strips in floor and aprons panels in 1:3 cement and coarse sand mortar.

-

-

-

... More
25x3mm

80

-

76.28

... More
40x3mm

120

-

76.28

... More
Disposal of waste water of by pass chamber through P.V.C. Pipe 160mm dia including supply of pipe, excavation & laying, T&P etc. complete.

80

-

1350.98

... More
Supply and fixing of 900 V-notch 4mm thick M.S plate with sharp edged and scale etc.complete as per direction of engineer incharge.

4

-

3646.1

... More
BUILDING WORK :- Excavation of earth for foundation in ordinary soil (loam, clay or sand) including lift upto 1.5M and lead upto 50M including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches and plinth, disposal of surplus earth upto a distance to 50M from the center of the foundation trenches.

336.78

-

167.29

... More
Concrete with cement, coarse sand and 40 mm nominal size (20 mm-2 part & 40 mm - 6 part) approved stone ballast in proportion of 1:4:8 in foundations including supply of all materials, labour, T&P etc. required for proper completion of the work.

68.34

-

3660.97

... More
Ist class brick work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

170.78

-

5758.33

... More
40 mm thick D.P.C. in cement concrete consisting of 1:2:4 cement, coarse sand and graded stone aggregate 12.5 mm nominal size(10-12.5 mm) and including water proofing(ISI Mark) compound in the proportion as specified by the manufacturer including supply of all materials, labour, T&P etc. required for proper completion of the work.

96.16

-

368.35

... More
12 mm thick plaster in 1:4 cement and coarse sand mortar for plinth shall be done on both side of brick work inner side 15 cm below plinth and outside 15 cm below GL.

382.05

-

196.14

... More
First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work (thickness of wall not be less than one brick).

318.26

-

6303.03

... More
Supply and fixing of M.S. angle iron 40x40x5mm door chaukhat including supply and fixing of four hinges with one coat of red oxidised primer.

10.77

-

8350.91

... More
Supply and fix hold fast in doors and windows chaukhats 25cmx50mmx6mm flat iron including their cutting,moulding, welding to requirwed shape also including other materials such as nails and screws etc required in all aspect to complete the work.

412.8

-

124.74

... More
Supply and fixing of the Z-section M.S. window with grill as per departmental type drawing including supply and fitting of handle, locking arrangement etc. with one coat of red oxidised primer.

30.24

-

9033.6

... More
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work wrought to required shape as necessary including supply of all steel and its bending and binding with binding wire necessary over lapping as required etc. complete.

155.24

-

8859

... More
R.C.C. work (with use of C.C. mixer) in proportion of 1:1.5:3 cement, coarse sand and 20mm nominal size (10mm-1 part & 20 mm - 2 part) stone grit with proper finishing including supply of all materials, labour, T&P and Kachcha plaster on wooden plank shuttering or ply shuttering excluding cost of steel but including binding the same with 24 B.W.G. binding wire.

-

-

-

... More
Footing

5.28

-

12843.6

... More
Column

11.87

-

12843.6

... More
Plinth Beam

32.84

-

12513.46

... More
Lintels

16.7

-

10985.75

... More
Sun-shades & Slab

79.5

-

12513.46

... More
Stairs

6.14

-

12513.46

... More
Sand filling under floor including supply of local sand, filling, watering and ramming etc. complete for proper completion of the work.

131.76

-

795.92

... More
25 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20 mm nominal size(10-20 mm) stone grit laid in panel and finished with 3mm floating coat of neat cement including 75mm thick base concrete consisting of cement, coarse sand and stone ballast 40mm nominal size(20-40 mm) in proportion of 1:4:8 and removing all over lapping of mortar at the joints of the panels if any and giving them uniform finishing including fixing of glass strip at desired intervals, supply of all materials, labour, T&P etc. required for proper completion of the work

630.06

-

597.58

... More
40 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20 mm nominal size(10-20 mm) stone grit laid in panel and finished with 3mm floating coat of neat cement including 75mm thick base concrete consisting of cement, coarse sand and first class brick ballast 40mm nominal size (20-40 mm) in proportion of 1:4:8 and removing all over lapping of mortar at the joints of the panels if any and giving them uniform finishing including fixing of glass strip at desired intervals, supply of all materials, labour, T&P etc. required for proper completion of the work.

303.15

-

435.54

... More
Supply and fixing of ISI marked water proof flush door shutters of 40 mm thick including all labour, T&P etc. complete but excluding painting and including ISI marked oxidized iron fitting e.g. tower bolt, sliding bolt, handle etc. complete as per direction.

133.52

-

3795.95

... More
Supply and fixing of oxidized iron fittings of approved make for doors and window.

15

-

4797.5

... More
12mm thick plaster above plinth with cement, mortar in proportion of 1:6 cement and Banda(Ken)/ Hamirpur(Betva) sand over brick work, minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of the work.

2866.98

-

155.21

... More
20 mm thick plaster in dado or skirting with cement mortar in proportion of 1:2 cement and coarse sand with finishing 3 mm thick floating coat of neat cement including supply of all materials, labour, T&P etc. required for completion of the work.

69.84

-

510.32

... More
Brick Coba :- (a)Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 Kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the R.C.C. slab including adjointing walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5( 1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement:5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of juctions of walls and slabs (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortarof mix 1:4(1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm squared 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operation to be done in order and as directed and specified by the Engineer-in-charge: With average thickness of 120 mm and minimum thickness at khurra as 65 mm

239.1

-

1461.27

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

478.8

-

1416.65

... More
Providing and fixing 1st quality vetrified floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting / dados (height 150 mm) over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

94.3

-

938.5

... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

50.7

-

2038.55

... More
200x300 mm ceramic tiles over base with 12 mm thick 1:3 cement and coarse sand mortar in kitchen upto 60 cm high above platform, W.C. wall - 120 cm high and bathroom wall 1.80 m high including supply of all materials, labour, T&P etc. required for proper completion of the work.

168.54

-

897.71

... More
Kitchen platform 18 mm thick polished kota stone over 12 mm thick 1:3 cement and coarse sand mortar including supply of all materials, labour, T&P etc. required for proper completion of work.

12.24

-

1955.99

... More
W.C. and bathroom floor 300x300 mm Antiskid/mattfinished ceramic tiles over 20 mm thick 1:4 cement & coarse sand mortar including supply of all material, labour, T&P etc. required for proper completion of the work.

47.52

-

1454.07

... More
Providing 45 cm wide and 25mm thick P.C.C apron in 1:2:4 cement, coarse sand and 10-20mm stone grit over 75mm thick base concrete in 1:4:8 cement, coarse sand and 20 to 40mm gauge stone ballast with finishing coat of neat cement including fixing of glass strips at desired intervals including supply of all materials,labour,T&P etc. complete.

47.11

-

886.02

... More
Supply and fixing 3 mm thick glass strips in floor and aprons panels in 1:3 cement and coarse sand mortar.

-

-

-

... More
25x3mm

36

-

76.28

... More
40x3mm

15

-

76.28

... More
The outer surface of wall finish with two coat of weather coat-All Guard, Apex-Ultima (premium acrylic smooth exterior paint with silicon additive) with one coat of priming coat of exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

1149

-

274.61

... More
The inner finish should be two coat of oil bound distemper Ist quality such as Bison distemper, tractor distemper with one coat of priming coat over smooth base of cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

2390.4

-

168.79

... More
Supply and fixing of 4 mm thick glass panes in panel of Z-section window shutters including supply of M.S. clip and I.S.I. mark putty etc. as required for proper completion of the work.

92.66

-

978.5

... More
Construction of 100mm dia semi circular C.C. drain as per departmental drawing in proportion of 1:2:4 cement, coarse sand and 20 mm nominal(10 mm - 1 part & 20 mm - 3 part) stone grit over 100 mm base concrete in proportion of 1:4:8 cement, coarse sand and 40mm nominal(20 mm - 2 part & 40 mm - 6 part) stone ballast with finishing of 3 mm thick floating coat of neat cement also including supply of all materials, labour, T&P etc. complete.

190.74

-

794

... More
Painting and varnishing over new iron work or new wooden work with one coat of primer and two coats of approved paints or varnish including supply of all materials, labour, T&P etc. required for proper completion of work.

272.23

-

94.63

... More
Supply and fixing of 100 mm dia PVC pipe rain water down pipe with clamp

54.6

-

335.83

... More
Water supply & sanitary fittings Water supply & sanitary fittings Orissa Pan 580 mm with low level P.V.C. cistern (ISI marked) one W.H.B. 450x300 mm size stainless steel kitchen sink without drain board, one stainless steel soap tray with W.H.B. including glazed tiles in 600 m height one looking mirror with W.H.B., 500 litre P.V.C. storage tank etc. and also as per direction of Engineer-in-charge. Electrical provision All wiring, Fan hook in room & verandah, aquaguard or water purifier point in kitchen, power point in kitchen & bed room, computer and T.V./cable point in room, 16 Am point at a suitable place as per direction, exhaust point in kitchen, copper wiring in conduit, C.F.L. in all places of bulbs etc., 08 Nos. Flood light for campus lightning and also as per direction of Engineer-in-charge. Internal electrificaton, water supply and sanitary fittings including supply of all materials, labour, T&P etc. Complete.

5

-

153520

... More
Construction of septic tank and soak pit including all type of earth/soil excavation with supply of all machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge (for Staff Quarter only)

3

-

13260

... More
Construction of septic tank :- Septic tank shall be of first class brick work in 1:4 cement mortar the foundation and floor shall be of 1:3:6 cement concrete. Inside of septic tank shall be finished with 12 mm cement plaster and floor shall be finished with 20 mm cement plaster with 1:3 mortar mixed with standard water proofing compound. Upper and lower portion of soak-pit shalk be of second class brick work in 1:6 cement mortar and middle portion shall be of dray brickwork. Roof covering slabs and baffle wall shal be of precast R.C.C. The length of the connecting pipe from latrine seat including all type of earth/soil excavation with supply of all machinery, T&P, labour etc. required for proper completion of the work as per directions of engineer-in-charge.

1

-

76829.94

... More
Providing and laying design mix cement concrete 100 mm thick of M-20 grade, in roads, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, mixing with weigh batcher, laying at site, spreading and mechanically compacting by using needle and surface vibrators, levelling to required slope / camber, finishing with required texture over 100 mm thick base of GSB.

151.2

-

1733.39

... More
Supply & Laying of 80 mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern inter locking tiles over 30 mm thick fine sand bed over 150mm thick GSB and also including earth wotk in excavation in proper slope & camber, brick work for side alignment including all materials, labour, T&P required for proper completion of work as per direction of Engineer in charge.

480

-

1401.48

... More
Horticulture, plantation, Land scaping, beautification, internal path way at water works compound including supply of all material, labour T&P etc. as per approval and direction of engineer in charge

1

-

24950

... More
Development work :- Construction of boundary wall, Gate with piller, site development, approach road (Zone 6 and 9) & repairing of boundary wall Gate with piller, site development, approach road (Zone 1, 2, 3, 4, 5, 7 and 8) campus cleaning, removal of debries, bush cutting and disposal within municipal limt and filling ogf earth if required as per direction of engineer in charge. Note - Plinth should be made above 60 cm from nearest highest service / link road. Excavation of earth for foundation in ordinary soil (loam, clay or sand) including lift upto 1.5M and lead upto 50 M including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches and plinth, disposal of surplus earth upto a distance to 50M from the center of the foundation trenches.

307.43

-

167.29

... More
Concrete with cement, coarse sand and 40 mm nominal size (20 mm-2 part & 40 mm - 6 part) approved stone ballast in proportion of 1:4:8 in foundations including supply of all materials, labour, T&P etc. required for proper completion of the work.

40.54

-

6810.58

... More
Ist class brick work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

179.05

-

5758.33

... More
20 mm thick D.P.C. in cement concrete consisting of 1:2:4 cement, coarse sand and graded stone aggregate 12.5 mm nominal size(10-12.5 mm) and including water proofing(ISI Mark) compound in the proportion as specified by the manufacturer including supply of all materials, labour, T&P etc. required for proper completion of the work.

187.5

-

368.35

... More
12 mm thick plaster in 1:4 with cement and coarse sand mortar for plinth shall be done on both side of brick work upto 15 cm below GL.

371.62

-

196.14

... More
First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work(thickness of wall not be less than one brick).

261.24

-

6303.03

... More
C.C. coping on boundry wall & RCC Piller in 1:2:4 cement, coarse sand and stone grit (10-12.5 mm) including supply of all material, cost of centering, shuttering with extra labour, T&P etc. complete required for proper completion of work.

588.86

-

172.71

... More
12mm thick plaster with cement mortar in proportion of 1:6 consisting of cement and Banda(Ken)/Hamirpur(Betava) sand over brick work including supply of all materials, labour, T&P etc. required for proper completion of the work.

4086.78

-

155.21

... More
Making groves 15 mm wide on wall plaster as per drawing including supply of all materials, labour, T&P etc. required for proper completion of the work.

1672.27

-

51.2

... More
Supply and fixing of barbed iron wire fencing to post in four rows including supply of all materials, labour, T&P etc. required for proper completion of the work as per direction of engineer in charge.

10087.6

-

59.46

... More
M.S. angle iron (50x50x6 mm) for barbed wire fencing and 2 meter distance including supply of all materials, labour, T&P etc. required for proper completion of the work as per direction of engineer in charge.

4661.76

-

90.33

... More
Concrete with cement, coarse sand and 20 mm approved stone ballast in proportion of 4:2:1 in including supply of all materials, labour, T&P etc. required for fixing M.S. Iron angle proper completion of the work.

1.73

-

6810.58

... More
Raised pointing with cement mortar 1:4 consisting or cement and local sand on brick work including supply of all materials, labour, T&P etc. required for proper completion of the work.

1989.96

-

232.75

... More
White washing in three coats including supply of all materials labour, T&P etc required for proper completion of work.

4810.51

-

22.9

... More
The outer surface of wall finish with two coat of weather coat-All Guard, Apex-Ultima(Premium Acrylic Smooth Exterior Paint with Silicon Additive) with one coat of priming coat of exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall Putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

7205.74

-

274.61

... More
Supply and fixing of M.S. gate with RCC piler as per departmental design & drawing with ncessary hold fast, bush and ball bearing, sliding bolt and locking arrangement, painting etc. including supply of all material, labour, T&P etc. required for proper completion of the work for Water works campus (3.60 M wide main gate)

10

-

52350

... More
Supply and fixing of M.S. gate with RCC piler as per departmental design & drawing with ncessary hold fast, bush and ball bearing, sliding bolt and locking arrangement, painting etc. including supply of all material, labour, T&P etc. required for proper completion of the work for Water works campus (1.20 M wide wicket gate)

20

-

16510

... More
Supply & Laying of 80 mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern inter locking tiles over 30 mm thick fine sand bed over 150mm thick GSB and also including earth wotk in excavation in proper slope & camber, brick work for side alignment including all materials, labour, T&P required for proper completion of work as per direction of Engineer in charge.

616

-

1401.48

... More
Construction of 300 mm wide and 300 mm deep brick drain inside the water works campus including supply of all materials, labour, T&P etc required for proper completion of the work

240

-

2398.75

... More
Providing and fixing of lighting arrangement in campus complete in all respect including supply of all material, labour T&P etc. as per approval and direction of engineer in charge

2

-

14392.5

... More
Horticulture, plantation, Land scaping, beautification, internal path way at water works compound including supply of all material, labour T&P etc. as per approval and direction of engineer in charge

9

-

11993.75

... More
Construction of Artificial Recharging of Ground water hrough roof top rain water of pump house, bypass chamber’s water & overflow of O.H.T. supplying of all material, pipes, grates, etc. complete in all respect

3

-

161150

... More
Filling of earth in water works campus and TW/pump house campus including supply of carted earth including loading, unloding, levelling, dressing and ramming of the earth tc complete in all respect. Earth filling in the campus shall be done Contour survey of campus and prior written necessary permission of Engineer in charge.

1347.5

-

268.66

... More
Supply of following items as per ditrection of engineer in charge

-

-

-

... More
Office table (Godrej Make) (6x4 fit) with shelf and Glass

5

-

18600

... More
Office table (Godrej Make) (8x4 fit) with shelf and Glass

5

-

34600

... More
Computer table (Godrej Make) (4x3 fit) with Shelf

5

-

8000

... More
Revolving Chair (Godrej Make)

5

-

14500

... More
Office chair (Godrej Make)

40

-

5100

... More
Computer chair Revolving (Godrej Make)

10

-

9580

... More
Almirah (Godrej Make)

5

-

16500

... More
Almirah Glass rak (Godrej Make)

5

-

17600

... More
Split AC (1.5 tonne) Five star (Voltas, Hitachi, Blue star Make) with Stablizer

3

-

64200

... More
Desktop (Hp, Dell Make) with Color Laser Printer (Hp Make) (i5 processor)

5

-

63500

... More
Xerox machine wifi (HP, Canon, Samsung Make)

2

-

72200

... More
Color Printer wifi (HP Make)

2

-

20500

... More
Repairing work of existing pump house - 25 Nos. & Local Control Station room - 01 No. Ist class brick work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

25

-

5758.33

... More
Dismantling existing plaster over damage/cracked surface with stacking / proper disposal opf chiseld plaster including supply of all materials, labour T&P etc. required for proper completion of the work as directed by the engineer in charge.

1620

-

75.99

... More
Racking of joints of brick mansonry in wall in exposed surface to poperly prepare surface for new plaster work including supply of all materials, labour T&P etc. required for proper completion of the work.

1500

-

38

... More
12 mm thick plaster with cement & coarse sand mortar in 1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work

1680

-

155.21

... More
Repair for electric fitting

25

-

4797.5

... More
Reparing of floor in PCC 1:2:4

250

-

438.22

... More
First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work (thickness of wall not be less than one brick).

67.5

-

6303.03

... More
Repairing of 25 mm thick PCC floor laid over base concrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide.

435.04

-

438.22

... More
Supply and fixing of flush door including supply and fixing of all assessories, all materials, labour T&P etc. required for proper completion of the work as per direction of engineer in charge.

25

-

4790

... More
Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work (Door & Window Frame)

-

-

-

... More
Door Frame (02 Nos.)

1450

-

83.5

... More
Window Frame (04 Nos.)

2727.5

-

83.5

... More
Supply and fixing of the M.S. window with grill as per departmental drawing including supply and fixing of handle, locking arrangement etc. with one coat of red oxidised primer.

5625

-

90.33

... More
11.5 cm string or drip-coarse in 1:6 cement and local sand mortor

1082.75

-

373.12

... More
Painting or varnishing new iron work in small areas or new wood work with one priming coat and one coat of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work.

702

-

94.63

... More
White washing in three coats including supply of all materials labour, T&P etc required for proper completion of work.

4930

-

22.9

... More
The inner finish should be two coat of oil bound distamper Ist quality such as Bison distemper, tractor distemper with one coat of priming coat over smooth base of cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

2430

-

168.79

... More
The outer surface of wall with two coat of weather coat-All guard, Apex- Ultima (Premium Acrylic smooth Exterior paint with silicon Additive) with one coat of primer coat exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

2680

-

274.61

... More
Supply and fixing 4 mm thick plain glass panes in panel of Z-section window shutter including supply of M.S. Clip and I.S.I. Mark putty etc as required for proper completion of work.

206.75

-

978.5

... More
Supply and fixing of 100 mm dia PVC pipe rain water down pipe with clamp

250

-

335.83

... More
Supply & fixing of forciling for LCS room including supply and fixing of all assessories, all materials, Paits, labour T&P etc. required for proper completion of the work as per direction of engineer in charge.

1

-

35600

... More
Repairing for electric fittings, wiring for LCS room including supply and fixing of all assessories, all materials, labour T&P etc. required for proper completion of the work as per direction of engineer in charge.

1

-

14300

... More
Repairing work of existing Staff Quarter (1 Set) First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work (thickness of wall not be less than one brick).

3.05

-

6303.03

... More
12 mm thick plaster with cement & coarse sand mortar in 1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work

85

-

155.21

... More
Scraping old color washing and preparing the surface by removing loos material etc. including all labour and T&P ete complete

167.87

-

19

... More
Repairing of 40 mm thick over base concrete consisting of cement, local sand and 40 mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6 m wide

20.07

-

438.22

... More
White washing in three coats including supply of all materials labour, T&P etc required for proper completion of work.

350

-

22.9

... More
The inner finish should be two coat of oil bound distamper Ist quality such as Bison distemper, tractor distemper with one coat of priming coat over smooth base of cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

350

-

168.79

... More
The outer surface of wall with two coat of weather coat-All guard, Apex- Ultima (Premium Acrylic smooth Exterior paint with silicon Additive) with one coat of primer coat exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

350

-

274.61

... More
Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work (Door & Window Frame)

-

-

-

... More
Door Frame (02 Nos.)

58

-

83.5

... More
Window Frame (04 Nos.)

109

-

83.5

... More
Supply and fixing of the M.S. window with grill as per departmental drawing including supply and fixing of handle, locking arrangement etc. with one coat of red oxidised primer.

88

-

90.33

... More
Supply and fixing of flush door including supply and fixing of all assessories, all materials, labour T&P etc. required for proper completion of the work as per direction of engineer in charge.

1

-

4790

... More
Painting or varnishing new iron work in small areas or new wood work with one priming coat and one coat of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work.

26

-

94.63

... More
Supply and fixing 4 mm thick plain glass panes in panel of Z-section window shutter including supply of M.S. Clip and I.S.I. Mark putty etc as required for proper completion of work.

8.27

-

978.5

... More
Repair for electric fitting

1

-

7676

... More
Repair for sanitation work

1

-

9595

... More
Supply and fixing of 100 mm dia PVC pipe rain water down pipe with clamp

10

-

335.83

... More
Repairing work of Existing Clear water reservoir cum pump house (500 KL at Zone 5 & 400 KL at Zone 8) Cleaning of Surface area of CWR including supply of all materials, labour, T&P etc. required for proper completion of the work.complete as per direction of Engineer-in-charge.

2

-

43100

... More
Providing and applying one coat of slurry of hydrophilic in nature for waterproofing treatment of internal surface of Tank.

270

-

400.87

... More
Repairs of Tank wall, water tighteing work including all labour, material etc required for completion of work.

2

-

46500

... More
Dismantling existing plaster over damage/cracked surface including supply of all materials, labour T&P etc. required for proper completion of the work.

1140

-

75.99

... More
Stacking/proper disposal of chiseld plaster as directed by the Engineer- in-charge

2

-

17200

... More
12 mm thick plaster with cement & coarse sand mortar in 1:6 over brick work minimum thickness not to be less than 12 mm finished with 3 mm floting coating of neat cement including supply of all materials, labour T&P etc. required for proper completion of the work

540

-

155.21

... More
Repairs of cracks on concret surface of tank including all labour, material extraholding etc required for completion of work.

2

-

38300

... More
Ist class brick work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work.

4

-

5758.33

... More
Racking of joints of brick mansonry in wall in exposed surface to poperly prepare surface for new plaster work including supply of all materials, labour T&P etc. required for proper completion of the work.

240

-

38

... More
Repair for electric fitting

4

-

4797.5

... More
Reparing of floor in PCC 1:2:4

40

-

438.22

... More
First Class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including supply of all materials, labour, T&P etc. required for proper completion of the work (thickness of wall not be less than one brick).

9.76

-

6303.03

... More
Repairing of 25 mm thick PCC floor laid over base concrete consisting of cement, local sand and 40mm gauge first class brick ballast in the proportion of 1:4:8. For construction of apron 0.6m wide.

67.2

-

438.22

... More
Supply and fixing of flush door including supply and fixing of all assessories, all materials, labour T&P etc. required for proper completion of the work as per direction of engineer in charge.

4

-

4790

... More
Supply and fix angle iron door chaukhat of size 50mm x 50mm x 6 mm including supply of all materials, labour T&P etc. required for proper completion of the work (Door & Window Frame)

-

-

-

... More
Door Frame (02 Nos.)

232

-

83.5

... More
Window Frame (04 Nos.)

436.4

-

83.5

... More
Supply and fixing of the M.S. window with grill as per departmental drawing including supply and fixing of handle, locking arrangement etc. with one coat of red oxidised primer.

900

-

90.33

... More
11.5 cm string or drip-coarse in 1:6 cement and local sand mortor

173.24

-

373.12

... More
Painting or varnishing new iron work in small areas or new wood work with one priming coat and one coat of approved paints or varnish including supply of all materials labour, T&P etc required for proper completion of work.

104

-

94.63

... More
White washing in three coats including supply of all materials labour, T&P etc required for proper completion of work.

1060

-

22.9

... More
The inner finish should be two coat of oil bound distamper Ist quality such as Bison distemper, tractor distemper with one coat of priming coat over smooth base of cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

660

-

168.79

... More
The outer surface of wall with two coat of weather coat-All guard, Apex- Ultima (Premium Acrylic smooth Exterior paint with silicon Additive) with one coat of primer coat exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

400

-

274.61

... More
Supply and fixing 4 mm thick plain glass panes in panel of Z-section window shutter including supply of M.S. Clip and I.S.I. Mark putty etc as required for proper completion of work.

33.08

-

978.5

... More
Supply and fixing of 100 mm dia PVC pipe rain water down pipe with clamp

40

-

335.83

... More
Repairing work of existing Over Head Tank (Zone - 1, 2, 3, 4, 5, 7 & 8) Supply and fixing on lightening Conductor on O.H.T. with proper arrangement and alignment including all labour and T&P etc. complete. The lightening conductor consisting of an elevation rod, down conductor and earth plate shall confrom with the standars as required by the Electircal Inspector of U.P from time to time, Any amendment, addition etc. suggested or required by the Electircal Inspector shall be carried out including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

7

-

47950

... More
Supply and fixing of water level indicator with suitable arrangement as per latest I.S. code including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

7

-

46050

... More
The outer surface of wall with two coat of weather coat-All guard, Apex- Ultima (Premium Acrylic smooth Exterior paint with silicon Additive) with one coat of primer coat exterior primer over smooth base of white cement based wall putty such as Birla, J.K. wall putty over the plastered wall surface to prepare the surface even and smooth including supply of all materials, labour, T&P etc. required for proper completion of the work.

7615

-

274.61

... More
Repairs of O.H.T. wall, water tighteing work including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

3

-

115100

... More
Repairs of cracks on concret surface of OHT (Brase, Column, Bottom dom, top Dom etc complete) by guniting method including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

3

-

95950

... More
Repairs & Replacement of OHT pipes & Specials including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

365

-

2780.5

... More
Repairs & Replacement of Valves & carting including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

28

-

32627.02

... More
Dismentling & reconstruction (including raising of flore of OHT including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

3

-

71950

... More
Replacment of both M.S. Ladder (inner & outer) & MS cover on top dome including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

8

-

76760

... More
Supply & fixing of medium class G.I. pipe in free roof on stair case, balconey and top dome including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

914

-

623.68

... More
Supply & fixing of M.S. safty gate on stair case including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

7

-

23020

... More
Net on top dome went including supply of all materials, labour T&P etc. required for proper completion of the work as per direction of Engineer-In-Charge.

15.08

-

11034.25

... More
B - E&M works Construction of 5 Nos Tubewell (1200 LPM ) TRANSPORTATION

-

-

-

... More
RIG MACHIN:-Transportation of rig machine including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

5

-

31356.5

... More
AIR COMPRESSOR :-Transportation of 350 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

5

-

27173.04

... More
O.P. UNIT :-Transportation of 3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

5

-

43062.36

... More
TUBE WELL ASSEMBLY :-Transportation of TUBE WELL ASSEMBLY including Loading , unloading with labour etc complete in all respect .

5

-

28785

... More
(DRILLING BORE) As per IS 2800 (Part I & II)

-

-

-

... More
Barricading

5

-

4797.5

... More
Logging of Bore

5

-

17271

... More
Drilling of 600mm dia bore from G.L. to 60m BGL.

300

-

2197.25

... More
Drilling of 500mm dia bore from 60m BGL to 100m BGL.

200

-

1851.84

... More
Drilling of 500mm dia bore from 100m BGL to180m BGL.

400

-

2168.47

... More
LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OF T.W. BY GRAVEL-Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 160m BGL.

-

-

-

... More
Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54 m BGL.

270

-

355.01

... More
Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 54 m BGL to 100m BGL.

230

-

239.87

... More
Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 160m BGL.

300

-

297.44

... More
TUBE WELL: ASSEMBLY MATERIALS(As per IS 4270, IS 8110) :-

-

-

-

... More
300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X200mm dia M.S reducer 16mm thick, 1 no M.S. well cap 12mm thick , 11 no M.S. ring 150X12mm thick, M.S. clamp ,T.W. Support (I Section) etc comp in all respect .

270

-

5168.82

... More
200mm dia MSERW 7.1mm thick plain /slotted pipe including with 30 no M.S ring 150X12mm thick , 1 no M.S. bail plug , 20 no center guide etc comp in all respect.

530

-

3575.09

... More
PEA-GRAVEL (As per IS 4097) :-1.60mm to 4.80mm size pea-gravel of Lalkuwan quarry duly screened, washed and proper stacking at site.

235

-

5757

... More
Development of tube well by 350 PSI air compressor

-

-

-

... More
Development of tube well by 350 PSI air compressor

300

-

2897.69

... More
Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work.

5

-

5757

... More
Development of tube well by 3 cusec O.P. Unit

-

-

-

... More
Cutting of housing cover by gas cutter

5

-

2878.5

... More
Development of tube well by 3 cusec O.P. Unit.

400

-

748.41

... More
Re-welding of Tube well cover by Electric welding

5

-

2878.5

... More
Watch & Ward during construction period.

5

-

43177.5

... More
TEST:-Chemical and bacteriological test.

5

-

2400.69

... More
Pumping plant with piping and valves ( 1200 LPM) for 3 Nos T/W

-

-

-

... More
SITC with following 1.Clear water submersible pump complete with electric motor capable to operate on 380/420 volts 3 phase 50 Hz A.C. for 1200 LPM. 20 Mtr. Head and 10 H.P.(bothe tentative) - 1Set MAIN PIPING AND VALVES:- 2.1-150MM dia 5.4 mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3.0m long 24 m with 1m long top pipe with cap (Dumdum) and sealing ring.etc 2.2:-CI-D/F 90 Degree bend of size 150 mm dia -1No 2.3:- CI-A/F Tee of size 150 mm dia -1No 2.4:-M.S. distance piece of 150 mm dia 1.00m long 1 Nos. and 1.5m long 2 No.- 3no 2.5:-M.S. enlarger/reducer of suitable size.-1No 2.6:-Reflex Valve 150 mm dia P.N. rating 1.0 Having following specification confirming (as per IS-14846-2000)-1No 2.7:-Other necessary fitting for gauges, control cock, Air hand pump steel airline 40m etc.-1Set 3:-Tools and Spanners with Pipe Wrench etc.-1Set 4:-tones capacity 4.5 m lift, spur geared chain pulley block Indef make P Type-1No 5:-9 inch size pump protection ring -1No 6:-Miscellaneous items-1No 7:-Painting of pumping plant materials-1job 8:-Erection of pumping plant and Power wiring & earthing and other civil works.-1job 9:-Commissioning & testing of pumping plant.-1job 10:-On account of watch & ward during Pump Installation -1job

3

-

179482.15

... More
Spare column pipe heavy duty 150 mm Size

6

-

6236.8

... More
Internal electrification of pump house and chlorinating room with wiring point for light with 1.0mm sq. P.V.C. insulated multi strand copper conductor cable in heavy gauge rigid P.V.C. conduit pipe on surface complete 14 S.W.G. copper earth continuously wire piano type switch and ceiling rose/angle batton holder on 3 mm. thichphenolic laminated back ligh sheet etc. complete in all respect as per I.E. rule including luminaries with 15 amp. Switch fuse unit.

3

-

16311.5

... More
SCADA compatable chlorinating system

3

-

71962.5

... More
SITC of servo Stabilizer 10 KVA or suitable capacity

3

-

76760

... More
Sluice valves with motor operated actuator valves of size 150 mm

6

-

119937.5

... More
CE/UL Certified electromagnetic flowmeter of size 150mm

3

-

143925

... More
Soft starter 7.5 KW or suitable capacity

3

-

57570

... More
CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W

3

-

115140

... More
Complete cabling of tubewell including all power & control cable of all equipment at pumphouse and OHT

3

-

57570

... More
CE/UL Certified Pressure transmitter

3

-

47975

... More
Pumping plant with piping and valves ( 1200 LPM) for 2 Nos T/W

-

-

-

... More
SITC with following 1.Clear water submersible pump complete with electric motor capable to operate on 380/420 volts 3 phase 50 Hz A.C. for 1200 LPM. 46 Mtr. Head and 25 H.P.(bothe tentative) - 1Set MAIN PIPING AND VALVES:- 2.1-150MM dia 5.4 mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3.0m long 24 m with 1m long top pipe with cap (Dumdum) and sealing ring.etc 2.2:-CI-D/F 90 Degree bend of size 150 mm dia -1No 2.3:- CI-A/F Tee of size 150 mm dia -1No 2.4:-M.S. distance piece of 150 mm dia 1.00m long 1 Nos. and 1.5m long 2 No.- 3no 2.5:-M.S. enlarger/reducer of suitable size.-1No 2.6:-Reflex Valve 150 mm dia P.N. rating 1.0 Having following specification confirming (as per IS-14846-2000)-1No 2.7:-Other necessary fitting for gauges, control cock, Air hand pump steel airline 40m etc.-1Set 3:-Tools and Spanners with Pipe Wrench etc.-1Set 4:-tones capacity 4.5 m lift, spur geared chain pulley block Indef make P Type-1No 5:-9 inch size pump protection ring -1No 6:-Miscellaneous items-1No 7:-Painting of pumping plant materials-1job 8:-Erection of pumping plant and Power wiring & earthing and other civil works.-1job 9:-Commissioning & testing of pumping plant.-1job 10:-On account of watch & ward during Pump Installation -1job

2

-

259446.9

... More
Spare column pipe heavy duty 150 mm Size

4

-

6236.8

... More
Internal electrification of pump house and chlorinating room with wiring point for light with 1.0mm sq. P.V.C. insulated multi strand copper conductor cable in heavy gauge rigid P.V.C. conduit pipe on surface complete 14 S.W.G. copper earth continuously wire piano type switch and ceiling rose/angle batton holder on 3 mm. thichphenolic laminated back ligh sheet etc. complete in all respect as per I.E. rule including luminaries with 15 amp. Switch fuse unit.

2

-

16311.5

... More
SCADA compatable chlorinating system

2

-

71962.5

... More
SITC of servo Stabilizer 25 KVA or suitable capacity

2

-

122816

... More
Sluice valves with motor operated actuator valves of size 150 mm

4

-

119937.5

... More
CE/UL Certified electromagnetic flowmeter of size 150mm

2

-

143925

... More
Soft starter 22 KW or suitable capacity

2

-

81557.5

... More
CE/UL Certified hydrostatic type sub soil watel level transmitter for T/W

2

-

115140

... More
Complete cabling of tubewell including all power & control cable of all equipment at pumphouse and OHT

2

-

57570

... More
CE/UL Certified Pressure transmitter

2

-

47975

... More
Pumping plant for zps (zone-6)

-

-

-

... More
PUMPING PLANTS:Supply of 3000 LPM at 33 mtrs. Head Synchrous speed1500 RPM Water Lubricant VT Pump with squirrel cage induction motor 40 HP suitable for above pump with TEFC enclosure including base plate along with coupling, coupling guard, foundation, bolts, Etc in all respect.

3

-

882736.2

... More
MAIN PIPING AND VALVES

-

-

-

... More
D.I. Reflux valve 200 mm dia .

3

-

47970.2

... More
200 mm dia Sluice valve with actuater suitable for SCADA operation.

3

-

143925

... More
Common Header (for all pumps)

-

-

-

... More
D.I. D/F Distance piece 250mm dia 0.5 mtr. Long

3

-

4320.6

... More
D.I. D/F Distance piece 250 mm dia 1 mtr. long

3

-

7857.3

... More
D.I. D/F Distance piece 250 mm dia 1.5 mtr. Long

2

-

8978

... More
D.I. D/F Distance piece 250 mm dia 2 mtr. Long

2

-

10095.9

... More
D.I. D/F Distance piece 250 mm dia 3 mtr. long.

2

-

12407.3

... More
D.I. D/F 900 bend 250 mm dia

2

-

6823

... More
D.I. Tee 250 x 200 x 250 mm Tee A/F

3

-

9491.4

... More
Sluice valve 250 mm dia with actuater suitable to SCADA operation

1

-

182305

... More
DI D/FReflux valve 250 mm dia

1

-

67236

... More
Bye Pass Arrangement:-

-

-

-

... More
A/F Tee 250x250x250 mm dia

1

-

9617.1

... More
Sluice valve 250mm dia with actuater suitable to SCADA operation

1

-

182305

... More
Dismantling joints for Commmon Header and Flowmeter for 250 mm dia

2

-

20265.6

... More
CE/UL Certified Electromagnetic FLOW METER: 250 mm dia size

1

-

215887.5

... More
Electrical Items

-

-

-

... More
Supply of 3 core 25 sq. mm. unarmoured Copper conductor cable from panel to starter and starter to respective motors with lugs etc.

90

-

1741.5

... More
Supply of 3.5 core 95 sq. mm. Aluminium armoured cable from LT Control Panel to Motor control panel.

100

-

1096.7

... More
MOTOR CONTROL PANNEL :- Supply of M.S. Fabricated Dust and Vermin Proof, Cubical Type, Floor Mounted Control Panel compatible to SCADA with RS485 Port consisting including all necessary equipments and protection devices as following :- INCOMING :- 1 No. 200 Amp. M.C.C.B. motorizes & microprocessor based. OUTGOING :- (i) 3 Nos. 100 Amp. microprocessor based MCCB with Soft starter RS 485 Port- 400 V Class, 30 KW (40 HP), Rating (ii) 1 No. MCCB 32 Amp for lighting and fan (iii) 2 No. MCCB 63 Amp for Auxiliary Load

1

-

945107.5

... More
Supply of microproceesor based three phase sensing power factor correction relay panel, IEC/EN 61000-6- (2&4) communication interface with RS 485, indication of switching on units, auto /manual status and shall have over load protection, no volt release, having multi parameterlike KW, KVA, KVAR rating capacity of 50 KVAR or suitable capacity

1

-

103395.7

... More
Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating:

-

-

-

... More
200Amp Rating

1

-

115140

... More
CE/UL Certified Radar type Level Transmiter for CWR

1

-

115140

... More
CE/UL Certified Pressure transmitter for each pump.

3

-

47975

... More
Earthing Complete in all respect. Earthing system shall executed as per IS : 3043 and I.E. rules. (for Motor Pump set and Control Panel)

4

-

18710.3

... More
Installation of all Equipments, Power wiring of Electrical equipments with cable tray, cable lugs, cable gland and commissioning of the pumping plants

1

-

239875

... More
3 Ton / 12 mtr. Lift chain pulley Block with four way motion HOT, Gantry I-section Girder, square rod with travelling trolley.

1

-

759924

... More
Rubber mat for Electrical purpose as per IS 5424. 1 Mtr. X 2 Mtr. (12.5 mm thick).

10

-

3492.6

... More
CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg.

4

-

6080.4

... More
Internal & External electrification of Pumping plant.

1

-

86355

... More
Tools & Sppanners Complete.

1

-

5354

... More
Electromegnatic dozzer of suitable capacity SCADA compatible

1

-

71962.5

... More
CE/UL approved manufacturer's Surge protector for all AC control supplies of all equipments.

1

-

14392.5

... More
Installation, commissioning & testing of Automation related equipments for ZPS

1

-

19190

... More
Trial run for 3 month period for one ZPS

1

-

14392.5

... More
12 watt solar based LED light with GI pole

4

-

28785

... More
SCADA of ZPS FOR ZONE -6

-

-

-

... More
CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure sutable to Communicate with GSM based modem unit with redudant CPU & Power Supply with annalog & digital Parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at muliple stations with Control Panel as specified in tender technical specification.

1

-

550000

... More
G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.

1

-

30000

... More
CE/UL Certified Intelligent Smart Energy Meter

1

-

25000

... More
Complete cabling for ZPS including all power & control cable of all equipments at ZPS and OHT (Upto 3 Pumps)

1

-

80000

... More
Security Survelliance IP Camera with Recorder (optional)

2

-

20000

... More
Automation of Units of all zone T/W

-

-

-

... More
CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents

5

-

275000

... More
GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents.

5

-

30000

... More
CE/UL Certified Intelligent energy meters

5

-

25000

... More
Auto phase reversal Unit 100 Amp

5

-

45000

... More
CE/UL Certified Surge Protector for control panel

5

-

15000

... More
CE/UL Certified 7" HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters

5

-

30000

... More
Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 V and power equipments

5

-

120000

... More
Installation,Testing and commissioning

5

-

10000

... More
Trial run 3 months

5

-

5000

... More
SUB STATION FOR ZPS ZONE-6

-

-

-

... More
H.T.Panel( Comprising with 1 no. incoming and 2 -Outgoing. Supplying of indoor type floor mounted metal clad, 11 KV VCB panel with 1No. 630 Amp. incoming VCB & 2 Nos 630 Amp. outgoing VCB totally enclosed, horizontal drawout, horizontal/ vertical isolation type breaker as per IS with all necessory protection and also should be compatible to SCADA operation

1

-

2110900

... More
Transformer Supplying of 160 KVA, 11/0.44 KV, 3 Phase, 50 Hz, Dyn 11, indoor ONAN type, copper wound transformer with OFF load tap changing arrangement on HV side in steps of +7.5% & -15%, LV side @ 2.5% stapping complete with all accessories i/c first filling of filtered dehydrated oil and confirming to IS 1180-2014 & as per specification complete in all respects as required at site.

2

-

492363.59

... More
Main L.T. Panel Supply of LT Panel comprisiing of following details. 02 No. 200 Amp. Incoming MCCB Panel shall be mechanically and electrically interlocked completely and 01 Nos 200 Amp MCCB as Outgoing and 01 Nos 80Amp Outgoing for Auxiliary Load suitable for SCADA and all necessary protection equipments and metering equipment as per requirement.

1

-

479750

... More
Supply of 120 Sq.mm size XLPE cable from 11 K.V.UPPCL metering panel to H.T. incoming Panel, and H.T. panel to Transformer.

90

-

2312.39

... More
Supply of H.T. Cable end termination joint kit.

6

-

15831.75

... More
Complete in all respect. Earthing system shall executed as per IS : 3043 and I.E. rules.

12

-

18710.25

... More
Supply of 1.1 KV grade 95 sq mm 3.5 core PVC insulated Armored Aluminum cable from Transformer to L.T. Panel.

180

-

1096.7

... More
Installation and commissioning of 11 KV/0.44KV, substations including 100 KVA, Transformer including HT Panels and L.T. Panel with cable tray, cable lug, cable gland including all labor T&P complete in all respect.

1

-

167912.5

... More
CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg.

8

-

6080.35

... More
Heavy Duty leak proof fire bucket as per IS 2546/1974

6

-

935.51

... More
Fire bucket stand for 6 bucket

1

-

935.51

... More
Internal & External electrification of Sub-Station

1

-

143925

... More
Rubber mat for Electrical purpose as per IS 5424. 1 Mtr. X 2 Mtr. (12.5 mm thick).

10

-

3452.58

... More
NOC for substation from safety department

1

-

47975

... More
S.I.T.C of followings E/M items at OHT (zone-06)

-

-

-

... More
CE & UL certified Radar type level tranmitter for OHT

1

-

120000

... More
Motor Operated Actuator with Sluice Valve/Flow control valve (350 mm )-DMA 1

1

-

300000

... More
CE / UL certified Electromagnetic flowmeter of size:350mm-DMA-1

1

-

330000

... More
Dismantelling joint 350 mm-DMA-1

1

-

37200

... More
Motor Operated Actuator with Sluice Valve/Flow control valve (300 mm )-DMA 2

1

-

215000

... More
CE / UL certified Electromagnetic flowmeter of size:300mm-DMA-2

1

-

260000

... More
Dismantelling joint 300 mm-DMA-2

1

-

34500

... More
S.I.T.C of followings E/M items at OHT(zone-9)

-

-

-

... More
CE & UL certified Radar type level tranmitter for OHT

1

-

120000

... More
Motor Operated Actuator with Sluice Valve/Flow control valve (250 mm )-DMA 1

1

-

190000

... More
CE / UL certified Electromagnetic flowmeter of size:250mm-DMA-1

1

-

225000

... More
Dismantelling joint 250 mm-DMA-1

1

-

32323

... More
Motor Operated Actuator with Sluice Valve/Flow control valve (200 mm )-DMA 2

1

-

150000

... More
CE / UL certified Electromagnetic flowmeter of size:200mm-DMA-2

1

-

190000

... More
Dismantelling joint 200 mm-DMA-3

1

-

27200

... More
Stablizer for ZPS 3 Phase AC automatic voltage stabilizer for 125 KVA or suitable capacity

1

-

350000

... More
Local Control Station (LCS)

-

-

-

... More
CE/UL & BIS Certied industrial grade LED MONITOR with latest configuration as per specification.

1

-

240000

... More
Desktop/PC with i5/i7 processor for as per spec mentioned in technical bid doucments.

1

-

90000

... More
CE/UL Certied 3 KVA UPS with batteries as per spec mentioned in technical bid doucments.

1

-

150000

... More
Full development version of required TAGS SCADA Software with coustomization of Software for MCS as per requirement as per spec mentioned in technical bid doucments.

1

-

400000

... More
CE/UL Certied local control room PLC with redundant CPU & power supply at MCS in IP54 inclouser as spec mentioned in technical bid doucments.

1

-

550000

... More
GSM based wireless/Broadband/Equipment communication system for PLC capable to transfer & received data and gather data from remote sites to control stations. All accessories included signal enhancer antenna along with running expences till DLP

1

-

40000

... More
CE/UL Ceritified Firewall for network protection

1

-

180000

... More
SURGE PROTECTOR FOR ETHERNET Communication Protection

1

-

15000

... More
CE/UL Ceritified Industrial grade Ethernet switch.

1

-

15000

... More
CANON/H.P. or equivalent Laser Printer 1018 or equivalent.

1

-

30000

... More
Security Survelliance IP Camera for with recorder

1

-

20000

... More
Installation, commissioning & testing

1

-

50000

... More
Test and Trial run for 3 Months period

1

-

45000

... More
Three month trial of ZPS(zone -6) Quantity of sodium hypochloridr require for three month for ZPS

4320

-

55

... More
Three month trial of all zoneTubewell

-

-

-

... More
Quantity of sodium hypochloridr require for three month for all tubewell

2160

-

55

... More
Provision for operation of pumping plant (each tubewell 3 No oprator)

15

-

20000



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.