UP Jal Nigam Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date27 Jan 2020
Closing Date26 Aug 2023
Tender AmountRefer Documents
Costs
EMD
₹ 21,24,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPJNM_828573_1Bid Award Id
ViewTender No
2296/m-4/70/10-08-2023Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
TREATMENT PLANT
-
-
-
Renovation of The Treatment Works of 6.75+2.25 MLD capacity are proposed to be Repair 1+1 setteling units, Rapid Gravity Filter, Chlorinator, Back wash tank, Clear Water Reservoir cum pump house, Constant pressure tanks, Admin Building , Chemical Building, Laboratory. Supply of all materials, labour T&P etc. as required for Repairing of above component with required replacement of RCC/Brick work/ Plaster etc of all structures ,Supply and fixing of door & windows, replacement of chain piling System and ISMB , supply and fixing of Sluice valves fitting & etc. , Repair or supply and fixing GI pipe railing 20mm dia seperated on 65x65x6mm MS angles 1.50m C/C either wide as site core & other fase of balcony with gate .construciton of floor pump house using coata stone and chequr tile in foot bridge painting and doors and windows and all concrete cement using apex brand of paint approved colours 3 coats and painting all pipe with anti corrosive /bitumens paints. work includes commissioning, testing, trial &run, defect liabilities and handing over the complete works to Jal Sansthan/Charkhari Nagar Palika Parishad,District-Mahoba(U.P.).
1
1439250
1439250
C.W.R. (400 KL) CUM - PUMP HOUSE
-
-
-
Supply of all materials, labour and T&P etc. complete for the construction of Ground RCC CWR of 400 KL capacity & with 1.00m wide P.C.C. appron alround with 20 cm semi circular P.C.C. drain M.S. ladder with hand rails out side and inside the tank body proper ventilators at top, water level indicator, Lightening conductor as per latest I.S.I. or electricity rules, 1150mm dia medium pattern C.I. Manhole cover hinged with locking arrangement fixing and jointing vertical DID/F, pipes, specials and duck foot bents of required size for inlet, outlet fising of outlet sluice valve and wash out sluice valves with all jointing materials for proper completion and other appurtenant works including excavation in all type of soil & in rock etc. painting on exposed water proof cement paint, painting of pepes and ladder with approved anticorrosive paints also including testing of the CWR including carriage of construction materials by truck/ head load etc. upto site of work.Provision for soil testing
1
6044850
6044850
R.C.C Over tanks
-
-
-
Supply of all the materials, labour T&P and construction of a R.C.C. Over head tank above ground level with main components, based on IS-3370 or liquid storage concrete in over head tank and foundation concrete as per specification in I.S. 2911.700 Kl with 20 m stagingAll Components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682 and I.S. 456.Minimum depth of founditation below original ground level will be 2.0 M.Seismic effects and wind load should be taken into consideration as I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure. The asumed bearing capacity of soil has been taken as 8 M.T. sqm.1m wide RCC stair case from ground lavel to balcony.M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC plateform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one alluminium ladder inside the tank body ( from manhole in top dome to bootom dome).1 m wide R.C.C. balcony around the tank at the junction point of vertical wall and conical wall.Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, arround the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. posts of 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.Proper ventilator at top dome in circular shape of 1.2 m dia along with an R.C.C. cover of minimum 1.50 m dia and 7.5 cm thickness, pillar of vintilator should be minimum 50 cm dia. The space between top dome and R.C.C. cover should be covered with mosquito net of standered qualitity along with expended mentaled jail.Electro Megnatic Flow Meter.Lightening conductor as per I.S.S. 2309 of its latest amendments of latest electricity rules. It should consist proper elevation rod with 5 or more fork points proper down conductors of prescribed mental of proper size prescribed by ISS 2309-1969 and ISS 3013-1966.D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixe at top dome at proper place.Supply, fixing, jointing of following size of D.I. D/F Pipes with D.I. D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, over flow and washout as per latest / relevent I.S. specifications with all jointing materials for proper completion of work including other appurtenant works and execuvation in all types of soil.Inlet 250 mmOutlet 300 mmOver Flow 250 mmWash out 100 mmSupply and Fixing of following sizes D.I. D/F sluice valves with hand wheels as per I.S.S. 700/1969 or its latest pressure 10 kg/sqcm including cartage from its store to the site of work, lowering them into trenches, fixing in position & testing etc. complete.Inlet 250 mmOutlet 300 mmOver Flow 250 mmConstruction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit under each duck foot bend to support the vertical pipes. These bed blocks should supported on the raft not on the soil.Construction of surface box type Sluice valve chamber for above sluice valve (3 No.) as per departmental type design and drawing including supply and fixing of 150 mm x 150 mm size C.I. surface box including locking arrangement.Construction of washout/ overflow chamber as per departmental type design and drawing.Construction of P. C. C. Floor & Drain and all other necessary work as per departmental type drawing and design.Painting of all concrete surface and steel pipe worrks with three coats of approved cement paint and anticorrosive paints.Testing & Commission etc. all complete work.Testing of bearing capacity of soil from a reorganized Govt. Engineering College or as directed by department.
1
10890325
10890325
Distribution System & Rising Main
-
-
-
Supply of the following sizes of D.I K-7/HDPE of PE-100 pipes with special and all jointing materails confirming to latest relevant I.S.8329/2000 & IS:4984:1995 or its latest amendment with couplers including complete in all respect F.O.R. destination including all Specials & Jointing material, taxes and insurance for rising main feedar main and distribution system
-
-
-
400 mm dia D.I K-7
17
96387
5669.87
350 mm dia D.I K-7
177
825159
4661.92
300 mm dia D.I K-7
854
3235020
3788.08
250 mm dia D.I K-9
280
1010402
3608.58
250 mm dia D.I K-7
1182
3486876
2949.98
200 mm dia D.I K-7
5053
11343681
2244.94
160 mm dia HDPE (PN-6)
1684
995883
591.38
140 mm dia HDPE (PN-6)
1500
681555
454.37
125 mm dia HDPE (PN-6)
4096
1477304
360.67
110 mm dia HDPE (PN-6)
3650
1036965
284.1
90 mm dia HDPE (PN-6)
43352
8516500
196.45
Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 1538(1969) class-1 working pressure 10kg/sqcm F.O.R destination including all Specials & Jointing material, taxes and insurance.
-
-
-
300 mm dia
2
249853
124926.9
250 mm dia
4
360000
90000
200 mm dia
4
266549
66637.27
150 mm dia
4
150257
37564.42
125 mm dia
3
94990
31663.5
100 mm dia
3
76999
25666.62
Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all Specials & Jointing material, taxes and insurance.
-
-
-
100 mm Dia
6
153999
25666.62
Supply of screwed down type air valve with gun metal seat at site stone including all Specials & Jointing material, taxes.
-
-
-
25 mm Dia
4
40682
10170.7
50 mm Dia
3
65629
21876.6
Supply underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to IS.369/1995 at site including all Specials & Jointing material, taxes.
1
15352
15352
Excavation for pipe line work in soil mixed with moorum,kankar & shingle etc Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.
-
-
-
Hard Rock By Chiselling
13882.07
19966026
1438.26
SOIL MIXED WITH
MOORUM/SHINGLE/KANKAR
34880.74
8209879
235.37
Dismantling and reinstatement of following type of surface including sorting out and staking of serviceable materials of disposal of unserviceable materials up to a distance of 50 m.Reinstatement of following type road including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto a distance all labour meterial T&P Etc. Complete. All work of roads shall be done similar to the road cut and as per the specifications of owner of road i.e PWD , Gram Panchayat etc.with mechenical vibrator compaction Where there are no specifications, the specifications as directed by engineer will be followed.
-
-
-
B.O.E. ROAD
473.58
183891
388.3
BITUMINOUS ROAD
12939.72
29069857
2246.56
C.C. ROAD
11382.73
21958652
1929.12
INTERLOCKING TILES
8755.68
9484065
1083.19
Lowering and laying of following sizes of DI/HDPF pipe and specials true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.
-
-
-
400 mm dia D.I K-7
17
3844
226.15
350 mm dia D.I K-7
177
32975
186.3
300 mm dia D.I K-7
854
138920
162.67
250 mm dia D.I K-9
280
35084
125.3
250 mm dia D.I K-7
1182
148849
125.93
200 mm dia D.I K-7
5053
471697
93.35
160 mm dia HDPE (PN-6)
1684
83576
49.63
140 mm dia HDPE (PN-6)
1500
57930
38.62
125 mm dia HDPE (PN-6)
4096
158187
38.62
110 mm dia HDPE (PN-6)
3650
128735
35.27
90 mm dia HDPE (PN-6)
43352
1371657
31.64
Carting of D/F Sluice valves of Following sizes to the site of works Lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete
-
-
-
300 mm dia
2
4850
2425.39
250 mm dia
4
9295
2323.75
200 mm dia
4
5731
1432.79
150 mm dia
4
5388
1347.1
125 mm dia
3
2719
906.66
100 mm dia
3
2556
852.17
Carting of scour valves to the site of works lowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.
-
-
-
100 mm Dia
6
5113
852.17
Carting of 20 mm dia screwed down air valves of following sizes to the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.
-
-
-
25 mm Dia
4
2786
696.61
50 mm Dia
3
2089
696.61
Carting of 80 mm dia flanges fire hydrant of the site of works lowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete.
1
362
362.29
Supply of all materials, labour T&P etc. required and construct sluice/scour valve chamber as per type design including supply and materials labour, T&P etc. complete.
-
-
-
surface box
12
40299
3358.25
masonry type
14
271480
19391.49
Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends and below the Valves.
2
13644
6822.04
Supply of all materials, labour T&P etc. required and construct scour valve chamber as per type design including supply and materials labour, T&P etc. complete.
-
-
-
Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
7
46545
6649.33
Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
1
13528
13528.95
Supply of all materials, labour T&P Etc. required and constructs single tap pillar type stand post as per type design.
-
-
-
Provision for small crossing of road culvert /nala coming in the alignment including supply of all labour T&P etc. complete.
20
200919
10045.96
Provision for Large crossing of road culvert / Nala coming in the alignment including supply of all labour T&P etc. complete.
12
269772
22481.08
Raw Water & Clear Water Existing Line Reparing Work-9621m
1
195681
195681.5
Dismantling and reinstatement of CC Road Cutting
250
482280
1929.12
Provision for New House Connection with HDPE pipes including supply of all materials, labours, T&P etc. required for proper completion of the work.
-
-
-
BOE Road
-
-
-
For 90mm dia
30
96716
3223.87
For 125mm to 160mm dia
8
27861
3482.65
For 180mm to 250mm dia
4
15007
3751.79
For 300mm dia
1
3886
3886.36
For 350mm to 500mm dia
-
-
-
C.C Road
-
-
-
For 90mm dia
975
4495344
4610.61
For 125mm to 160mm dia
246
1197869
4869.39
For 180mm to 250mm dia
140
719394
5138.53
For 300mm dia
19
100188
5273.1
For 350mm to 500mm dia
4
21792
5448.04
Bituminus
-
-
-
For 90mm dia
1128
5523037
4896.31
For 125mm to 160mm dia
285
1469200
5155.09
For 180mm to 250mm dia
162
878725
5424.23
For 300mm dia
22
122293
5558.8
For 350mm to 500mm dia
5
28668
5733.74
Interlocking
-
-
-
For 90mm dia
762
2933151
3849.28
For 125mm to 160mm dia
192
788747
4108.06
For 180mm to 250mm dia
110
481492
4377.2
For 300mm dia
15
67676
4511.77
For 350mm to 500mm dia
4
18746
4686.71
Kacha
-
-
-
For 90mm to 110mm dia
152
436910
2874.41
For 125mm to 160mm dia
38
119061
3133.19
For 180mm to 250mm dia
22
74851
3402.33
For 300mm dia
3
10610
3536.9
For 350mm to 500mm dia
1
3711
3711.84
Provision for Existing House Connection with HDPE pipes including supply of all materials, labours, T&P etc. required for proper completion of the work.
-
-
-
BOE Road
-
-
-
For 90mm dia
15
47257
3150.51
For 125mm to 160mm dia
4
13331
3332.81
For 180mm to 250mm dia
2
7049
3524.71
C.C Road
-
-
-
For 90mm dia
471
2572479
5461.74
For 125mm to 160mm dia
119
671640
5644.04
For 180mm to 250mm dia
68
396843
5835.94
For 300mm dia
9
53387
5931.89
For 350mm to 500mm dia
2
12113
6056.62
Bituminus
-
-
-
For 90mm dia
545
3236155
5937.9
For 125mm to 160mm dia
137
838467
6120.2
For 180mm to 250mm dia
78
492343
6312.1
For 300mm dia
11
70488
6408.05
For 350mm to 500mm dia
2
13065
6532.78
Interlocking
-
-
-
For 90mm dia
368
1542972
4192.86
For 125mm to 160mm dia
93
406889
4375.16
For 180mm to 250mm dia
53
242054
4567.06
For 300mm dia
7
32641
4663.01
For 350mm to 500mm dia
2
9575
4787.74
Kacha
-
-
-
For 90mm to 110mm dia
74
190037
2568.07
For 125mm to 160mm dia
19
52257
2750.37
For 180mm to 250mm dia
11
32364
2942.27
For 300mm dia
1
3038
3038.22
For 350mm to 500mm dia
-
-
-
Provide all materials, labour T&P etc and construct Boundary wall. As per type design.
315.2
1999089
6342.29
Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 1.2 m wide wicket gate.
1
39051
39051.65
Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road in water works campous.
255
267867
1050.46
Provide all materials, labour T&P etc. required for proper completion of work including levelling, dressing excavation and filling of earth where necessary for develop of water works site including carriage of earth.
210
28551
135.96
Construction of 300x300 mm size drain at following sites
490
503063
1026.66
Construction of single roomed Staff Quarter with box (full set) at following sites
-
-
-
construction of Staff Quarter at WTP (2 Room)
-
-
-
construction of Staff Quarter at Zone 3
1
767600
767600
Provide all materials, labour T&P etc. and construct the sub statoin building (LT/HT Room along with generaten room) as per type design at
1
1105133
1105133
Provision for Repairing of Existing Building Works including supply of all materials, labours, T&P etc. required for proper completion of the work. (Staff Quarter, Pump House & Boundry Wall)
-
-
-
Ist class brick works in 1:6 cement and local sand mortar in Super structure, supply of all materials, labour, T&P etc. requaired for proper completion of the work (Old Water Works Campus)
49.14
296613
6036.09
12mm thick plaster cement and local sand mortar in 1:6 over existing brick work minimum thickness not be less than 12mm including supply of all materials, labour, T&P etc. required for proper completion of the work.
911.05
148045
162.5
Supply and fixing of all materials, labour, T&P etc. required for making door shutters by M.S. sheet 18 gauge including supply and fixing M.S. 40x40x6 mm size also including angle iron chaukhat supply & fixing of oxidized iron fittings etc. complete.
6.7
61682
9206.4
Painting and varnishing on old iron work one coat priming and two coat of approved paint or varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.
188.16
22932
121.88
Weather coats paint with approved colouring including supply of all materials, labour, T&P etc. required for proper completion of the work.
911.05
229156
251.53
40mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20mm gauge stone ballast lead in pannels, finished with 3mm flooting coat of neat cement and 7.5 cm thick base concrete, consisting of cement and local sand and first class brick ballast 4 cm gauge in proportion 1:6:12 and removing any other over laping of morter in the joints of pannels of any given them uniform finish including supply of all materials, labour, T&P etc. required for proper completion of the work.
77.98
44324
568.41
White washing 3 coats including supply of all materials, labour, T&P etc. required for proper completion of the work.
200
4720
23.6
E& M work
-
-
-
Rennovation of Pumping Plant and accessories for Existing Intake Well
-
-
-
Supply of Vertical Turbine Oil lubricated Pump with 14 mtr column assembly along with VHS/VSS TEFC induction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications.
-
-
-
5000LPM, 75.00 HP, 45m Head
3
4994805
1664935.05
MAIN PIPING AND VALVES :- Supply of 250mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 100mm common Header upto 1 m. outside the pump house along with 300 x 250 x 300 mm A/F Tee, 300 mm bend, 300 mm blind flange, D/F Pipes suitable size all necessary nuts, bolts, rubber packing, M.S Support for pipe and valve etc. complete in all respect as per site conditions.
1
227881
227881.25
Motor operated actuator with sluice valve
-
-
-
Valve actuator of size 250mm for pumps
3
519569
173189.75
Valve actuator of size 300mm for common header
1
195977
195977.88
Non return valve
-
-
-
250 mm Dia
3
263924
87974.92
300 mm Dia
1
124809
124809.65
CE/UL Certified Electromagnetic flow meter
-
-
-
Electromagnetic flow meter of size 300mm for common header
1
236996
236996.5
ELECTRICAL ITEMS:-
-
-
-
Supply of 3 core 95 Sq.mm. Copper Conductor XLPE Cable from MCC Panel to Starter and Starter to respective motors with lugs etc.
75
443206
5909.42
Supply of dust and vermin proof MCC panel consisting of 01 no. incoming 500 Amp. and 4 Nos. (3x200 Amp.+1x63 Amp) MCCB Mirco processor based complete with 55 KW Digital soft starter panel with RS485 Port 400V Class power wiring, Ampire meter, Voltmeter & capacitor of suitable capacity for individual motors(Rates are taken with 03 nos.soft starter)
1
887615
887615.7
MCC Panel:- 1Nos@553770=553770
-
-
-
Soft Starter:- 3Nos@140000 =420000
-
-
-
CE/UL Certified level transmitter for Intake well
1
109383
109383
CE/UL Certified Pressure transmitter for pumps
3
136728
45576.25
CE/UL Certified Pressure transmitter for Common Header
1
45576
45576.25
Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out.
1
87460
87460.82
Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants
1
136728
136728.75
Electrical resistance sheet
5
13399
2679.88
Cable trench Chequerred plate
10
78714
7871.47
Fire fighting equipments 4.5 Kg such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Alstrong plate and board.
4
23105
5776.33
Internal & External electrification of pumping station.
1
96029
96029.16
RENNOVATION OF EXISTING 250 KVA SUBSTATION AT INTAKEWELL
-
-
-
Repairing/Servicing including all required material of indoor type floor mounted metal clad, 11 KV VCB panel with 1No. VCBs, totally enclosed & fully interlocked, horizontal drawout, horizontal/ vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and auto/manually closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz A.C. Short circuit fault level of 100 KVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 1600Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 11 KV cable (cable entry from *bottom/ top/side) end termination with heat shrinkable jointing material etc. as required. (a) Incoming – 1 No 800Amp. VCB
(b) Outgoing – 2 No 800Amp. VCB
1
227866
227866.86
Rewinding of 250KVA, 11/0.415 KV, 3 Phase, 50 Hz, Dyn 11, indoor ONAN type, copper wound transformer with OFF load tap changing arrangement on HV side in steps of +/- 2.5% & -7.5%, having cable end boxes on HV side suitable for 3x150sqmm XLPE cable of 33 KV grade and bus trunking arrangement on LV side complete with all accessories i/c first filling of filtered dehydrated oil and confirming to IS 1180.
1
159506
159506.8
Complete repairing of cubical type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630Amp capacity extensible type TPN aluminium alloy bus bars of hight conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec.LT panel consisiting of 2 Nos.630 Amp incoming and 1 Nos 630 Amp outgoing with 1 Nos spare ACB.
1
113933
113933.43
Internal and External Electrification of Substation Campus
1
93709
93709.79
INTERNAL & EXTERNAL ELECTRIFICATION WORK AT EXISTING SUBSTATION INTAKEWELL
-
-
-
Indoor Lighting
-
-
-
Surface Mounting
-
-
-
Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD 10 % , p. f.≥ 0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard
-
-
-
Suspended Mounting / Surface Mounting
-
-
-
36W LED light fixture 2'×2' with acrylic / prismatic front cover.
8
19016
2377.11
Outdoor Lighting
-
-
-
Supply, Erection and Fixing of hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 × 88.9 / 114.3 × 3.25 mm) over the existing poles.
-
-
-
Single arm overhang
6
4976
829.44
Supply and erection of M S swaged tubular pole conforming to IS:2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals, cable entry, GI cable sleeve complete as required. After eraction pole shall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as required.
-
-
-
9 mtr (410 SP-28)
6
53654
8942.41
Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy =120 Im/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety ,Input Frequency 50Hz+3% Power Factor 0.95 driver Efficiency 85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C. driver current 1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index 70 and CCT 5700K +355K.
-
-
-
LED Street Light fixture 70 Watt
6
32900
5483.39
Complete wiring of Pump house, HT & LT room with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc.
1
13672
13672.01
Rennovation of Pumping Plant and accessories for Existing MCWR to Existing CPT(1000 KL)
-
-
-
Supply of Vertical Turbine water lubricated Clear Water Pump with 6mt column assembly along with VHS/VSS TEFC induction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications.
-
-
-
3000LPM, 40.00 HP, 37m Head
2
1677198
838599.35
Motor operated actuator with sluice valve
-
-
-
Valve actuator of size 150mm for pumps
3
341821
113940.63
Valve actuator of size 200mm for common header
1
136728
136728.75
Valve actuator of size 300mm at CWR Inlet
1
195977
195977.88
Valve actuator of size 300mm at OHT Outlet
1
195977
195977.88
Non return valve
-
-
-
200 mm Dia
1
62941
62941.71
CE/UL Certified Electromagnetic flow meter
-
-
-
Electromagnetic flow meter of size 200mm for common header
1
173189
173189.75
Electromagnetic flow meter of size 300mm at CWR Inlet
1
236996
236996.5
Electromagnetic flow meter of size 300mm at OHT Outlet
1
236996
236996.5
ELECTRICAL ITEMS:-
-
-
-
Supply of 3 core 25 Sq.mm. Copper Conductor XLPE Cable from MCC Panel to Starter and Starter to respective motors with lugs etc.
75
115194
1535.92
Soft Starter with RS485 Port-400V Class, 30 KW Rating
3
273457
91152.5
CE/UL Certified level transmitter for MCWR
1
109383
109383
CE/UL Certified level transmitter for CPT
1
109383
109383
CE/UL Certified Pressure transmitter for pumps
3
136728
45576.25
CE/UL Certified Pressure transmitter for Common Header, CPT outlet etc.
2
91152
45576.25
Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.
1
29624
29624.56
Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out.
1
87460
87460.82
Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants
1
136728
136728.75
Electrical resistance sheet
5
13399
2679.88
Cable trench Chequerred plate
10
78714
7871.47
Fire fighting equipments such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Alstrong plate and board.
4
23105
5776.33
Internal & External electrification of MCWR
1
96029
96029.16
Rennovation of Pumping Plant and accessories for Existing MCWR to Existing Zone-1 OHT(1000 KL)
-
-
-
Supply of Vertical Turbine water lubricated Clear Water Pump with 6mt column assembly along with VHS/VSS TEFC induction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications.
-
-
-
1650LPM, 40.00 HP, 67m Head
2
1677198
838599.35
Motor operated actuator with sluice valve
-
-
-
Valve actuator of size 150 mm for pumps
3
341821
113940.63
Valve actuator of size 200 mm for common header
1
136728
136728.75
Valve actuator of size 300 mm at OHT Outlet
1
195977
195977.88
Non return valve
-
-
-
150 mm Dia
3
109432
36477.41
200 mm Dia
1
62941
62941.71
CE/UL Certified Electromagnetic flow meter
-
-
-
Electromagnetic flow meter of size 200 mm for common header
1
136728
136728.75
Electromagnetic flow meter of size 300 mm at OHT Outlet
1
236996
236996.5
ELECTRICAL ITEMS:-
-
-
-
Supply of 3 core 25 Sq.mm. Copper Conductor XLPE Cable from MCC Panel to Starter and Starter to respective motors with lugs etc.
75
115194
1535.92
Soft Starter with RS485 Port-400V Class, 30 KW Rating
3
273457
91152.5
CE/UL Certified level transmitter for OHT
1
109383
109383
CE/UL Certified Pressure transmitter for pumps
3
136728
45576.25
CE/UL Certified Pressure transmitter for Common Header, OHT outlet etc.
2
91152
45576.25
Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.
1
29624
29624.56
Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out.
1
87460
87460.82
Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants
1
136728
136728.75
Electrical resistance sheet
5
13399
2679.88
Cable trench Chequerred plate
10
78714
7871.47
Pumping Plant and accessories for CWR Zone-2 (For 900 KL Proposed OHT)
-
-
-
Supply of Vertical Turbine water lubricated Clear Water Pump with 6mt column assembly along with VHS/VSS TEFC induction motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications.
-
-
-
2600LPM, 25.00 HP, 30m Head
3
2298145
766048.34
MAIN PIPING AND VALVES :- Supply of 150mm Main piping & valves complete of suitable size and quantity required for delivery side, bye pass arrangement and 100mm common Header upto 1 m. outside the pump house along with 250 x 150 x 250 mm A/F Tee, 250 mm bend, 250 mm blind flange, D/F Pipes suitable size all necessary nuts, bolts, rubber packing, M.S Support for pipe and valve etc. complete in all respect as per site conditions.
1
136728
136728.75
Motor operated actuator with sluice valve
-
-
-
Valve actuator of size 150mm for pumps
3
341821
113940.63
Valve actuator of size 250mm for common header
1
173189
173189.75
Valve actuator of size 300mm at CWR Inlet
1
195977
195977.88
Valve actuator of size 300mm at OHT Outlet
1
195977
195977.88
Non return valve
-
-
-
150 mm Dia
3
109432
36477.41
250 mm Dia
1
87974
87974.92
CE/UL Certified Electromagnetic flow meter
-
-
-
Electromagnetic flow meter of size 250mm for common header
1
205093
205093.13
Electromagnetic flow meter of size 300mm at CWR Inlet
1
236996
236996.5
Electromagnetic flow meter of size 300mm at OHT Outlet
1
236996
236996.5
ELECTRICAL ITEMS:-
-
-
-
Supply of 3 core 120 Sq.mm. Armoured Aluminum Conductor Cable From UPPCL to Incoming of L.T. Control Panel with lugs etc.
50
52412
1048.25
Supply of 3 core 16 Sq.mm. Copper Conductor XLPE Cable from MCC Panel to Starter and Starter to respective motors with lugs etc.
75
76704
1022.73
Supply of dust and vermin proof MCC panel consisting of 01 no. incoming 250 Amp. and 4 Nos. (3x80 Amp.+1x63 Amp) MCCB Mirco processor based complete with 18 KW Digital soft starter panel with RS485 Port 400V Class power wiring, Ampire meter, Voltmeter & capacitor of suitable capacity for individual motors(Rates are taken with 03 nos.soft starter) a. MCC Panel:- 1Nos@553770=553770
b. Soft Starter:- 3Nos@85000 =255000
1
737214
737214.07
CE/UL Certified level transmitter for CWR
1
109383
109383
CE/UL Certified level transmitter for OHT
1
109383
109383
CE/UL Certified Pressure transmitter for pumps
3
136728
45576.25
CE/UL Certified Pressure transmitter for Common Header, OHT outlet etc.
2
91152
45576.25
Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.
1
29624
29624.56
Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works and all material, separate double earthing for each equipment shall be carried out.
1
87460
87460.82
Installation of all equipments, power wiring of Electrical equipments and commissioning of the pumping plants
1
136728
136728.75
3Ton Capacity hand operated over head Travelling(HOT) crane suitable for a span upto 6 mtr and travel lenth upto 10 mtrs with clear lift upto 6 mtr including gear type chain pulley block and geared travelling trolley complete with all accessories including guarder.
1
341406
341406.22
Electrical resistance sheet
5
13399
2679.88
Cable trench Chequerred plate
10
78714
7871.47
Fire fighting equipments such as four nos. fire extinguishers ABC type, one set sand bucket with stand and grouting at site and one set Alstrong plate and board.
4
23105
5776.33
Internal & External electrification of Pump house
1
96029
96029.16
INTERNAL AND EXTERNAL ELECTRIFICATION FOR EXISTING 9 MLD WTP
-
-
-
Internal and External Electrification
-
-
-
Outdoor Lighting
-
-
-
Supply installation tesling & Commissioning of IS0 certifted
company made high mast lighting system (as per PLG 07 of ILP UK technical report no 7 of ILE UK /IS:875 Part-1 - 2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, S.S. ropes (AISI 316, 7 / 19 costruction), EPR insulated PCP sheathed trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal (Octogonal) section, telescopic jointed and welding as per BS 5135 and also provide test certificate for wind tunnel test for High mast fixtures. complete in all respect.
-
-
-
12.5 Mtr. HM (in 2 Section)
1
145338
145338.34
Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy =120 Im/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety . Input Frequency 50Hz‡3%, Power Factor 0.95 ,driver Efficiency 85% .
THD(I) 10% , driver current 1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min =4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index 70 and CCT 5700K + 1355K, Driver current 1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen
printing on die cast housing to allow traceability/authenticity. Fixture
-shall be IS 10322 Complianced and also provide test Certificate/ report with liable warranty of product/accessories.
-
-
-
High Power LED Flood Light 200W
8
169992
21249.09
Indoor Lighting
-
-
-
Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with
2.5 KV internal/external surge protection B|S certified isolated driver having efficiency 85% , with Short & Open circuit protection and in compliance to IC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt ,THD 10 % , p.f.0.95,CRI 80 . life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000°K / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing and also provide test certificate of LED Fixtures from NABL.
-
-
-
36 W LED light Fixture 2' x 2' with acrylic / prismatic front cover.
4
10009
2502.38
Complete wiring of Pump house, HT & LT room with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc.
1
14392
14392.5
Automation For Intake Well
-
-
-
CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification.
1
550000
550000
GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification.
1
30000
30000
CE/UL Certified Intelligent energy meters
1
25000
25000
CE/UL Certified Surge protector for control panel
1
15000
15000
CE/UL Certified 7" touch screen suitable for communication with PLC/RTU for local display & control of process parameters.
1
30000
30000
Cable
-
-
-
(i) Complete cabling upto 3 Pumps
1
80000
80000
Security Survelliance IP Camera with recorder (optional)
2
40000
20000
Installation, commissioning & testing
1
20000
20000
Local Control Station at MCWR
-
-
-
CE/UL & BIS Certified industrial grade LED Monitor with latest configuration as per specification
1
240000
240000
Desktop / PC with i5/i7 processor for as per technical bid documents
1
90000
90000
CE/UL Certified 3 KVA UPS with batteries as per technical bid documents
1
150000
150000
Full development version of required TAGS SCADA Software with customization of software for LCS as per requirement as per spec. mentioned in technical bid documents.
1
400000
400000
CE/UL certified local control room PLC with redundant CPU & power supply at LCS in IP 54 enclouseras per spec. mentioned in technical bid documents.
1
550000
550000
GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & received data & gather from remote sites to control station, all accessories included signal enhancer anternna along with running expenses till DLP
1
40000
40000
CE/UL Certified firewall for network protection
1
180000
180000
SURGE PROTECTOR FOR ETHERNET communication protection.
1
15000
15000
CE/UL certified industrial grade Ethernet Swtich
1
15000
15000
Cannon/HP or equivalent Laser printer 1018 or equivalent
1
30000
30000
Security Survillance IP Camera with recorder (Optional)
1
20000
20000
Installation, Commissioning & testing including required furniture, A/C etc.
1
50000
50000
AUTOMATION FOR MCWR
-
-
-
CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification.
1
550000
550000
GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification.
1
30000
30000
CE/UL Certified Intelligent energy meters
1
25000
25000
CE/UL Certified Surge protector for control panel
1
15000
15000
CE/UL Certified 7" touch screen suitable for communication with PLC/RTU for local display & control of process parameters.
1
30000
30000
Turbidity Analyzer at CWR
1
135000
135000
PH Analyzer
1
135000
135000
Chlorine Analyzer
1
270000
270000
Cable
-
-
-
(i) Complete cabling upto 3 Pumps
1
80000
80000
Security Survelliance IP Camera with recorder (optional)
2
40000
20000
Installation, commissioning & testing
1
20000
20000
Automation For CWR Zone-2
-
-
-
CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure suitable to Communicate with GSM based modem unit with redudant CPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification.
1
550000
550000
GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification.
1
30000
30000
CE/UL Certified Intelligent energy meters
1
25000
25000
CE/UL Certified Surge protector for control panel
1
15000
15000
CE/UL Certified 7" touch screen suitable for communication with PLC/RTU for local display & control of process parameters.
1
30000
30000
Turbidity Analyzer at CWR
1
135000
135000
PH Analyzer
1
135000
135000
Chlorine Analyzer
1
270000
270000
Cable
-
-
-
(i) Complete cabling upto 3 Pumps
1
80000
80000
Security Survelliance IP Camera with recorder (optional)
2
40000
20000
Installation, commissioning & testing
1
20000
20000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements