UP Jal Nigam Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
UP Jal Nigam - UPJN Tender
Civil And Construction
Drainage Work
Eprocure
Opening Date31 Jan 2025
Closing Soon28 Feb 2025
Tender Amount₹ 19,47,16,040.57
Technical
Technical
Bid Capacity
... View More
To determine the bid capacity required, we look at the experience and financial criteria specified for eligibility. The experience criteria mention that the firm should have successfully completed and commissioned similar works during the last ten years, satisfying one of the following conditions: i. Three completed, tested, and commissioned works each costing not less than 30% of the estimated cost (i.e., Rs.596.37 Lacs).
ii. Two completed, tested, and commissioned works each costing not less than 40% of the estimated cost (i.e., Rs.795.16 Lacs).
iii. One completed, tested, and commissioned work of aggregate cost not less than 60% of the estimated cost (i.e., Rs.1192.74 Lacs). The estimated cost for the project can be inferred as Rs.1987.9 Lacs. The bid capacity required in terms of value can be directly linked to the experience criteria, which are:
- Rs.596.37 Lacs for each of three works,
- Rs.795.16 Lacs for each of two works,
- Rs.1192.74 Lacs for one work. And in terms of formulas, the required experience can be calculated as:
- 30% of the estimated project cost for three similar works,
- 40% of the estimated project cost for two similar works,
- 60% of the estimated project cost for one similar work. Additionally, the available Bid Capacity of the bidder at the expected time of bidding shall be more than the total estimated cost of the work for which the tender is invited, assessed using the formula: Assessed Available Bid Capacity = 2 x A x N - B Where, A = Maximum turnover during the last five financial years (corrected to the current level of value) N = Stipulated period of execution of the work for which the tender is invited in years. B = Value of existing commitments to be completed during the execution period of bid. The turnover shall be corrected to the current level of value by multiplying with the updation factor given. Updation factor for the last five financial years are: - Year 1: 1.00 - Year 2: 1.07 - Year 3: 1.14 - Year 4: 1.21 - Year 5: 1.28 The bid capacity required in the given tender is based on the Percentage Rate Method, where the bidder needs to quote a percentage above, below, or at par with the cost of the Bill of Quantities (BOQ). The formula for this method is: Bid Amount = (BOQ Cost) * (1 + Percentage Rate) Where Percentage Rate is the rate quoted by the bidder, which can be positive (above), negative (below), or zero (at par).
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in executing similar type of works, with a detailed experience certificate that demonstrates this experience. The bidder should have successfully completed similar works, with specific requirements including: 1. Three completed, tested, and commissioned works, each costing not less than 30% of the estimated cost (i.e., Rs. 596.37 Lacs).
2. Two completed, tested, and commissioned works, each costing not less than 40% of the estimated cost (i.e., Rs. 795.16 Lacs).
3. One completed, tested, and commissioned work of aggregate cost not less than 60% of the estimated cost (i.e., Rs. 1192.74 Lacs). Additionally, the bidder should have experience in similar works, including:
- Completed and commissioned works of STP of any proven technology on a turnkey basis, with a minimum capacity of: - 1.8 MLD in three works - 2.5 MLD in two works - 3.7 MLD in one work
- Work on a pipeline with a minimum diameter of 500 mm and a length of 500 m. The bidder should also have an average annual turnover of at least 30% of the project cost (Rs. 596.37 Lacs) in the immediate last three consecutive financial years on construction works. The experience must be within the last 10 years as of the date of publication of the NIT. The bidder can rely on the experience of its associates to demonstrate technical capacity. The required prior work experience for the bidder also includes:
1. One completed and commissioned work of STP of any proven technology on turnkey basis having a minimum 1.8 MLD capacity, OR 2. Two completed and commissioned works of STP of any proven technology on turnkey basis having a minimum 2.5 MLD capacity each, OR 3. One completed and commissioned work of STP of any proven technology on turnkey basis having a minimum 3.7 MLD capacity. The experience must also include 2/3rd size of maximum diameter (i.e., 500 mm dia) mentioned in BOQ in a minimum length of 500 m. The bidder should have experience in works of similar nature and value, with specific requirements for lead members of Joint Ventures (JV) or Consortium. For example, for project costing <10 Cr, the JV/Consortium should have the required technical experience collectively. For project costing >10 Cr upto 25 Cr, the lead member of JV/Consortium should have at least 30% technical experience of required technical experience. For project costing >25 Cr, both members of JV/Consortium should have at least 30% technical experience of required technical experience. The Bank Solvency Certificate should be equivalent to at least 40 percent of the cost put to bid. The bidder should provide details of similar type of works completed during the last 10 years, including the name of the work, brief scope of work, name of the client, contract value in Rs. in lacs, scheduled dates of start and completion of work, and actual date of completion. The contract value is to be mentioned in Rs. in lacs. The bidder needs to submit this information in the format specified in FORM- III, supported with Form-IIIA. The experience certificate of the Engineer-in-charge, not below the rank of Executive Engineer/Project Manager or equivalent, should also be appended with the details. The bidder should have prior work experience of completing and commissioning similar works, specifically "Completed, tested and commissioned works of sewerage Scheme, its associated infra-structure works." The required experience can be fulfilled in one of the following ways:
1. Three completed, tested, and commissioned works, each costing not less than 30% of the estimated cost (i.e., Rs. 596.37 Lacs).
2. Two completed, tested, and commissioned works, each costing not less than 40% of the estimated cost (i.e., Rs. 795.16 Lacs).
3. One completed, tested, and commissioned work, with an aggregate cost of not less than 60% of the estimated cost (i.e., Rs. 1192.74 Lacs). Additionally, the bidder should have experience in completing and commissioning works related to STP (Sewage Treatment Plant) with specific capacities:
- Three completed and commissioned works of STP with a minimum capacity of 1.8 MLD each.
- Two completed and commissioned works of STP with a minimum capacity of 2.5 MLD each.
- One completed and commissioned work of STP with a minimum capacity of 3.7 MLD. The experience should also include works with a minimum diameter of 500 mm and a length of 500 m. The bidder should have completed these works, including testing and commissioning, within the last
Costs
EMD
₹ 19,88,000Document Cost
₹ 23,600Tender Fee
Refer Documents
Summary
I D Of Drains Used Water Management System For Nagar Palika Parishad Gola Gokharannath Lakhimpur Kheri
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPJNM_1000705_1Tender No
324/M-13/25 DT 28.01.2025Tender Authority
UP Jal Nigam ViewPurchaser Address
-Website
http://http://jn.upsdc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
for E & m work
-
-
-
... More
Supplying, installing, testing and commissioning all Mechanical units (Mechanical fine screens, manual fine screen, belt conveyor for screenings, Detritus mechanism including Grit collection mechanism, Grit classifier mechanism, Organic return pumps, Air Blowers with acoustic enclosures along with drive motor and variable frequency drive motor, motors,, return activated sludge pumps with motors, decanters, core components of decanters comprising variable frequency drives, electric motors with gearbox, lifting mechanisms, level switches, magnetic switches etc. diffusers, Air pipe grid for diffusers with pipe supports, hardware, adhesives, fork lift / electric hoist with electric travelling trolley for air blowers, Gas chlorination system including vacuum chlorinators , Booster pumps, Interconnecting piping, safety equipments, electric hoist with electric travelling trolley for chlorine tonners, sludge sump mixer, certrifuge feed pumps with motors, dewatering polyelectrolite dosing pumps with motors, dewatering polyelectrolite dosing tank agitators, electric hoist with electric travelling trolley for centrifuges, service water pumps with motor, piping, valves / sluice gates etc)
-
-
-
... More
Supplying, installing, testing and commissioning all Electrical units HT Works : (HT substation including 4 - pole structure, HT panel, Transformers (ower control center, Internal HT cabling etc) LT Works : Motor control center, power & control cables with cable termination kits etc, Cable trays with fittings, hardware & supports, Earthing including earthing pits, earthing materials (GI / Copper earthing strips, earthing cables, hardware), local push button stations, junction boxes with accessories, hardware etc, Plant lighting (inside buildings and plant area) including lighting panel, lighting distribution boards, lighting poles, fitting & fixtures, cables, hardware etc, D.G. set (of required no & capacity) including AMF panel and all accessories.
-
-
-
... More
Supplying, installing, testing and commissioning all Instrumentation units : Pressure guages : Bourdon type, Pressures guuages : Diaphram type, DO meters : Immersion type, Level indicating transmitters : Hydrostatic type, VFD for Air Blowers, VFD for decanters, Decanter level sensor, Decanter position sensor, Level transmitters : Ultrasonic type, Differential Level transmitters : Ultrasonic type, Flow meter : Ultrasonic type, Level switches : Capacitance type, PLC - Cum - Control panel, Online UPS with required no & capacity with desired battery backup, PC with SCADA, printer & Desk.
1
35405550
35405550
... More
M.P.S. (Main Pumping Station)
-
-
-
... More
CIVIL WORKS
-
-
-
... More
Design (hydraulic, structural & architectural), supply, construction, testing and commissioning all civil structures for 6.5 MLD average Flow with 2.5 peak factor capacity MPS (indicative diameter of sump is 9 meter upto plinth) including pumping out sub soil water, interconnection with Sump, including hydraulic testing, Metering room, H.T. panel room, Transformer and D.G. R.C.C.platform, R.C.C. screen channel, R.C.C. Gate valve chamber, R.C.C. Sluice valve chamber, R.C.C. Air valve chamber, R.C.C. common header chamber etc complete including all labor, material, specials, T&P etc complete for proper completion of work in all respect, all as per Scope of Work and detailed specifications.
1
13221910
13221910
... More
RISING MAIN (MPS/IPS TO INLET OF STP/MPS)
-
-
-
... More
Supply of following sizes DI pipes Class K-9 including all joints materials, such as rubber gaskets cartage to site store, loading, unloading, insurance, taxes exercise etc.
-
-
-
... More
250 mm dia
3170
3608
11439198.6
... More
400 mm dia
60
6827
409662.6
... More
Excavation for sewer pipe line in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
-
-
-
... More
In ordinary soil (0.00-1.50)
3462.75
217
754256.21
... More
Carting of following sizes of pipes and specials from store to site of works (within 8 Kms.) and lowering them into trenches and laying true to alignment including jointing, testing and cutting of pipes.
-
-
-
... More
250 mm dia
3170
123
392667.9
... More
400 mm dia
60
210
12627
... More
Supply of following sizes of CI D/F non rising GM spindle type scour valve / Sluice Valve with cap. Class-10 (working pressure 10 Kg./cm² conforming to IS:790 at site store.
-
-
-
... More
250 mm dia
1
53675
53675.39
... More
400 mm dia
1
214498
214498.14
... More
Carting of scour valve / Sluice Valve of following sizes to site of work, lowering in already prepared trenches and fixing them in position, making flange joints including supply of all materials, such as bolts, nuts, rubber insertion, white lead, testing etc. complete.
-
-
-
... More
250 mm dia
1
1163
1163.04
... More
400 mm dia
1
1591
1591.62
... More
Supply of all materials, labour, T&P etc. and construct scour valve chamber as per type design.
-
-
-
... More
Masonary type
2
27825
55651
... More
Supply of following size double ball CI air valves with gun metal sheet.
-
-
-
... More
50 mm dia
2
20113
40226.08
... More
Cartage of following size double ball CI air valves with gun metal sheet.
-
-
-
... More
50 mm dia
2
261
523.62
... More
Supply of all materials, labour, T&P etc. and construct air valve chamber as per type design.
2
5757
11514
... More
I.P.S. (Intermediate Pumping Station)
-
-
-
... More
CIVIL WORKS
-
-
-
... More
Design (hydraulic, structural & architectural), supply, construction, testing and commissioning all civil structures for 5.29 MLD average Flow with 2.5 peak factor Constructing IPS (indicative diameter of sump is 9 meter upto plinth) including pumping out sub soil water, interconnection with Sump, at proper alignment including hydraulic testing, Metering room, H.T. panel room, Transformer and D.G. R.C.C.platform, R.C.C. screen channel, R.C.C. Gate valve chamber, R.C.C. Sluice valve chamber, R.C.C. Air valve chamber, R.C.C. common header chamber etc complete including all labor, material, specials, T&P etc complete for proper completion of work in all respect, all as per Scope of Work and detailed specifications.
1
12415930
12415930
... More
TAPPING ARRANGEMENT (DRAIN)
-
-
-
... More
Provision for coffer dam and required pumping to divert nala flow during construction of Nala flow during construction Nala cross wall (weir) Including supply of all materials, labour T&P and its maintenance complete including Construction of Temporary Drain.
4
95950
383800
... More
Bailing out of water form the excavated trench with help of pumps as well as manually and removal of sludge, sullary from the bed of Nala as and when required including supply of pumps, mobil oil, wages of operators etc. complete for proper completion of works.
4
50373
201495
... More
Excavation in Ordinary soil including disposal of surplus earth lift upto 1.5 mtr. & lead upto 50M filling watering & ramming of excavated earth, into the trenches and disposal of surplus earth upto a distance of 50M from the centre of the foundation trenches.
-
-
-
... More
0.00 - 1.50 m
74
217
16118.68
... More
1.50- 3.00 m
61.65
274
16915.53
... More
Provide and lay 1st class Brick ballast 40mm gauge with local sand in proportion of 12:6:1 in foundation including compaction complete.
-
-
-
... More
1.50-3.00
4.4
3663
16117.55
... More
Cement concrete with 20mm gauge stone ballast, local sand and cement in proportion 8:4:1 in foundation including supply of all materials, labour T&P etc. required for proper completion of work.
-
-
-
... More
1.50-3.00
6.4
6813
43608.13
... More
RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of 1:1.5:3 excluding supply of its fixing & binding including all labour materials T&P etc. complete.
-
-
-
... More
In foundation
17.84
12323
219849.99
... More
Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
21
11221
235649.19
... More
Supply and fixing of 1.50m wide and 1.00m high manual MS screen made of 10mm wide 20mm deep flat iron with angle frame 55x55x10mm
320
112
35907.2
... More
Supply and fixing of single face sluice gate of following size including construction of necessary RCC column cross beams and fixing and grouting of sluice gate in position true to alignment complete 1.5 x1.00m.
-
-
-
... More
Sluice gate 1.5 x 1.0 m
4
530267
2121070.72
... More
Construction of necessary, fixing and grouting of sluice gates.
4
47975
191900
... More
Disposal of surplus earth at proper place by truck upto a distance of 10 Km. including loading, unloading etc. all complete.
135.63
143
19521.23
... More
Fabricate, supply and fix MS ladder made of MS angle 60x60x6 and 20mm round bars etc. complete.
9
2734
24611.22
... More
Provision for construction of board crested cement, concrete, weir in main nala for diversion of flow including supply of all materials, T&P etc. for proper completion of work.
4
23987
95950
... More
Dismantling of nala RCC wall to make way for inlet of nala flow into the tapping channel including necessary repairs and removal and disposal of debries upto a distance of 50m and lift upto 5.0m complete.
4
19190
76760
... More
COLLECTION CHAMBER AT DRAIN
-
-
-
... More
Construction of Collection chamber of size 3.00x6.00 mtr.including all brick masonary, plastring, R.C.C work including all labour materials T&P etc. complete.
4
120014
480057.04
... More
RCC DRAIN
-
-
-
... More
Construction of RCC Drain of Size 1.0 M width and 1.7 M depth with RCC cover. Supply of all material complete in all respects.
40
29843
1193733.2
... More
APPROACH ROAD
-
-
-
... More
Provision of Approch Interlocking Road From main road to STP For construction of Site (Rate Analysis)
350
1561
546689.5
... More
INTERCEPTOR SEWERLINE
-
-
-
... More
Providing and erecting 1.00 metre high temporary barricading at site as per drawing/ direction of Engineerin- Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
250
824
206052.5
... More
Excavation for following depth below ground level for laying of sewers, manholes, gulley pits, sumps etc. in ordinary soil including cutting of joints pits, triming, dressing, leveling, refilling of trenches in 15 cm layer. @ 70% of total Quantity
-
-
-
... More
(A) Ordinary soil
-
-
-
... More
A. 0.00 - 1.50 m. depth
3839.55
217
836330.78
... More
B. 1.50 - 3.00 m. depth
1380.26
274
378715.74
... More
C. 3.00 - 4.50 m. depth
1380.26
345
476603.78
... More
Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm guage approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for proper completion of work.
-
-
-
... More
b. 3.00 - 4.50 m. depth
255.97
8681
2222121.64
... More
I. Provide and fix open timbering (covering 1/3rd surface area by planks) in trenches for the depth from 0.00 to 3.00 m. below ground level consisting of 4.00 cm. thick approved country wood planks for polling boards (125 cm x 75 cm) Indian sal wood waler.
-
-
-
... More
(a) 0.0 - 3.00 m
3544.2
370
1314083.03
... More
Supply of following sizes of R.C.C. non pressure pipes with rubber gasket including all taxes.
-
-
-
... More
For RCC Sewer Pipes NP3
-
-
-
... More
400 mm dia
627
1682
1055215.92
... More
500 mm dia
774
2292
1774201.5
... More
700 mm dia
568
3308
1879148.48
... More
Carting of following sizes of pipes including transportation, loading and unloading and R.C.C. non pressure pipes class NP3 and AC Mazza Pipe socket/spigot rubber ring jointing and specials from store to the site of work lowering the same into trenches in the following depth below ground level, true to alignment, caulking the joints with necessary open yarn soaked.
-
-
-
... More
For RCC NP3 Pipes 400 mm dia
-
-
-
... More
3.00 - 4.50 m. depth
627
743
465923.7
... More
500 mm. Dia
-
-
-
... More
3.00 - 4.50 m. depth
774
977
756840.42
... More
700 mm. Dia
-
-
-
... More
3.00 - 4.50 m. depth
568
1210
687666.24
... More
Constructing masonry Chamber circular type man hole dia of 180 cm inside, in brick work in cement mortar 1:3 (1 cement : 3 local sand) with 150 mm thick P.C.C. grade of 1:4:8. Top EHD R.C.C. mnahole cover with 560 mm dia compele as per type design, estimate and as per direction of Engineer - In - Charge.
38
124895
4746021.02
... More
Extra Depth per Running meter
4.66
34501
160779.04
... More
Sand filling including supply of all materials, labout T&P etc. required for proper completion of work for road crossing and as and where required as per site conditiond during execution of work.
984.5
798
786083.87
... More
Dismantling of roads for laying sewers including sorting out and stacking of serviciable materials, and diposal of unserviciable materials upto a distance of 60m and its reinstatement after filling and proper compaction of trenches.
-
-
-
... More
Bitumen Road
2326.5
159
370890.63
... More
Provision for road reinstatement charges.
-
-
-
... More
Bitumen Road
2326.5
2222
5169948.3
... More
Disposal of surplus earth
1376.66
364
501944
... More
Horizontal Directional Drilling for steel Ducts /Pipes :- Installation of steel product pipe by HDD method including preparing and setting up the plant and equipments, preparing new pipe work, material, installing new pipe-work and commissioning system or making the system ready for mechanical works like excavation, shoring / strutting etc. drilling, stringing, reaming and pulling back the new pipe work on the designed bore path alingment, proper disposal of drilling fluid and back fill of site after completion all inclusive as per IndSTT: 101:2018 Code of practice for horizontal Directional Drilling Technique suiting indian consditions.
-
-
-
... More
500 mm dia pipe (Sttel pipes above 450 mm and upto 700 mm dia )
40
12213
488539.2
... More
TREATED EFFLUENT CHANNEL UPTO SARAIN RIVER
-
-
-
... More
Providing and erecting 1.00 metre high temporary barricading at site as per drawing/ direction of Engineerin- Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
100
824
82421
... More
Excavation for following depth below ground level for laying of sewers, manholes, gulley pits, sumps etc. in ordinary soil including cutting of joints pits, triming, dressing, leveling, refilling of trenches in 15 cm layer. @ 70% of total Quantity
-
-
-
... More
(A) Ordinary soil
-
-
-
... More
A. 0.00 - 1.50 m. depth
390
217
84949.8
... More
B. 1.50 - 3.00 m. depth
142.24
274
39027.81
... More
Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm guage approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for proper completion of work.
-
-
-
... More
a. 0.00 - 1.50 m. depth
26
8113
210944.5
... More
Supply of following sizes of R.C.C. non pressure pipes with rubber gasket including all taxes.
-
-
-
... More
For RCC Sewer Pipes NP3
-
-
-
... More
700 mm dia
200
3308
661672
... More
Carting of following sizes of pipes including transportation, loading and unloading and R.C.C. non pressure pipes class NP3 and AC Mazza Pipe socket/spigot rubber ring jointing and specials from store to the site of work lowering the same into trenches in the following depth below ground level, true to alignment, caulking the joints with necessary open yarn soaked.
-
-
-
... More
For RCC NP3 Pipes (700 mm. Dia)
-
-
-
... More
1.50 - 3.00 m. depth
200
1140
228000
... More
Constructing masonry Chamber circular type man hole dia of 120 cm inside, in brick work in cement mortar 1:3 (1 cement : 3 local sand) with 150 mm thick P.C.C. grade of 1:4:8. Top EHD R.C.C. mnahole cover with 560 mm dia compele as per type design, estimate and as per direction of Engineer - In - Charge.
14
43386
607410.58
... More
Extra Depth per Running meter
5.56
34501
191830.79
... More
Sand filling including supply of all materials, labout T&P etc. required for proper completion of work for road crossing and as and where required as per site conditiond during execution of work.
302
798
241134.92
... More
Electrical And Mechanical Work
-
-
-
... More
Main Pumping station
-
-
-
... More
MCC Panel for MPS
-
-
-
... More
2mm thick MS sheet fabricated factory wired dust & vermin proof cubical and floor mounting type control panel comprising of following. Incoming panel- 2 nos. Reputed make cubical floor mounting extensible type panel complete with 4Pole air insulated aluminium Bus bar of 400 Amp. with Incommer feeder from PCC panel of STP 315 A,50KA,ACB 3 pole,Al BusBars, Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3O/C&1 E/F,indicating lamps,control fuse ,wiring etc.complete in all respect Housed in sheet steel cubical panel fitted with all above Load Distribution panel- Floor mounting extensible type cubical panel with common aluminium bus bar for 3 phase and one neutral comprising of suitable MCCB with over load trip, manual On/Off arrangement,indicating lamp, Ampere meter of suitable capacity, selector switch and internal wiring complete in all respect.(For 6 Nos. Pumps,1 for screens, 1 for Lighting) Spare feeder for each 1 type Spare feeder of 32Amp.x2Nos
1
671650
671650
... More
Supply and laying of 1100 volt grade aluminimum armoured cable of 3.5 CX 70 Sqmm or suitable size for suitable for 50 HP Pumps from LPBS to MCC panel
1
52773
52773
... More
Cable Jointing : This includes the cable jointing with all jointing materials of suitable capacity to connect load distribution panel to starter and starter to motor
1
47975
47975
... More
Installation and commissioning of MCC panel including all labour T&P complete in all respect.
1
47975
47975
... More
Provision for routine testing of equipments such as Pumps, main LT Panel etc. at manufacturer’s work’s and at site
1
47975
47975
... More
Clearance from Director of Electrical safety. Govt of U.P.
1
47975
47975
... More
Suitable VFD starter For 24 X7 Running Hour with RS 485 Port suitable for integration with RTU to operate 50 HP or suitable size submersible pump set & control panel with PMU to meet the basic requirement of motor protections such as No volt and under voltage protection and thermal over load protection. panel are equipped to take signals from the thermistor in the windings, the seal monitor and the Reverse rotation trip device and automatic start/stop device according to level in the sump.
6
119938
719628
... More
The Vertical submersible non clog pump should be single stage having two vanes semi open shrouded impeller coupled with submersible motor of 50 HP or suitable size Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 100 mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material- Casing & suction Bowl: CI IS 210 FG 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroison, erosion and prevent oxidation. Impeller: Duplex stainless steel CD4MCu (Chromium24.5% minimum, Carbon≤0.04%) as per ASTM A890 Gr1A or DIN 1.4474-EN 10088,Hardness 220-260 BHNPump Shaft: Stainless Steel: AISI 410 Wear Ring:/Neck Ring: Duplex stainless steel CD4MCu (Chromium 24.5% minimum , Carbon≤0.04%) its hardness to be 50 BHN less than impeller hardness'Pump and line shaft Sleeve: Stainless Steel with Ceramic coating strainer: SS 304 Coupling between Pump & Starter: Flexible Pin Bush Type Bearings : Anti friction L-10 with 60000 Hrs life Discharge of pump=85 lps Speed=960 Guide rail system of SS 316 for 50 HP or suitable size submersible pump sets comprises of guide pipe ,Pedestal, bracket, upper guide rail holder and lifting chain with D-Sackle etc complete for above pump set.
6
979006
5874036
... More
PLC Compatible Actuator based suitable for DI Sluice Valve 250 mm dia (Material DI)
6
182305
1093830
... More
PLC Compatible Actuator Based Suitable for Sluice Valve 450 mm dia (Material DI)
1
383800
383800
... More
Reflux valve 250 mm dia N.B (Material DI).
6
33583
201498
... More
Dismantling joints.
6
43177
259062
... More
Piping including flanges, S.S. Nut Bolt and Rubber packing etc. complete
1
298572
298572
... More
CE/UL Certified pressure transmitter for each Pumps with necessary fittings
7
47975
335825
... More
Suitable Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 450 mm dia main header line having following technical specification.
1
479750
479750
... More
Errection, commissioning,Testing charges of electromagnetic flow meter
1
47975
47975
... More
SITC of E.O.T. crane of 2 Tonne capacity along with gantry girders, chain pulley block and geared trolley suitable for 10 m span 15m clear lift complete in all respect for pump house. Detailed specifications are as below confirming to relevent I.S.
1
191900
191900
... More
Installation & Commissioning of all 6 Nos. Pump set, starters,Piping & Valves, Gauges as mentioned in above.
1
239875
239875
... More
local handling from store to site including loading carting, unloading and proper stacking.
1
52773
52773
... More
Painting of all pumps piping and valves with two coat enamel paint.
1
47975
47975
... More
Radar type level Transmitter for wetwell and screen channel
2
115140
230280
... More
Light wiring of pump house L.T. control room including exhaust fans (2 Nos.), Steel tubular poles (4 Nos.), LED Lights of suitable capacity
1
143925
143925
... More
S.I.T.C of suitable for handling Half peak capacity MultiRack mechanical bar screen having 20 mm clear gap between screen bar of S.S. 316 flat shall be 50mmx10mm size or any other suitable and angle of installation 70-80° duly followed with conveyor belt system including electric motor, starter, cable etc of suitable size in width
2
2230838
4461676
... More
S.I.T.C. of suitable manual bar screen for handling peak capacity having 20mm clear gap between screen bar of S.S.316 flat shall be 50mmx10mm size and angle of installation 45°
1
240835
240835
... More
S.I.T.C. of PLC/SCADA Compatible Actuator operated C.I.Sluice gate confirming to IS13349/92 or AWWA AC-501 having F shaped wall thimble rising spindle type flush bottom closure at upstream and downstream of screen channel
6
398193
2389158
... More
Automation of Units of MPS
-
-
-
... More
CE & UL Certified RTU/PLC with redudant CPU & Power Supply in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified. for SPS to store and transmit data on GSM Backbone. GSM/GPRS backbone. RTU/PLC designed with logic to transfer data at multiple stations as specified
1
550000
550000
... More
GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges.
1
30000
30000
... More
Intelligent energy meters
1
25000
25000
... More
Auto phase reversal Unit 630 Amp
1
225000
225000
... More
CE/UL Certified Surge Protector for control panel
1
15000
15000
... More
CE/UL Certified 7" HMl touch screen suitable to communicate with PLC/RTU,Local display and control of Parameters
1
30000
30000
... More
Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 V and power equipments
1
200000
200000
... More
Complete cabling for SPS
1
100000
100000
... More
Security Survelliance IP Camera
4
20000
80000
... More
Installation,Testing and commissioning
1
20000
20000
... More
Intermediate Pumping station
-
-
-
... More
11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 Nos. outgoing VCB panels (Breaker and panel should be of same OEM) complete with insulated bus bars, all necessary metering, Trivector meter and safety equipments to be operated from SCADA also
1
2110900
2110900
... More
11 KV / 0.415 KV, 125 KVA or suitable size outdoor, step down transformers
2
431775
863550
... More
11 KV XLPE cable of 3 x 70 sqmm or suitable size Al. armoured cable
1
59873
59873
... More
1.1 KV XLPE cable of 3.5 x 185 sqmm size or suitable size Al. armoured cable
1
143925
143925
... More
Cable Jointing Kit for HT, LT etc complete
1
132411
132411
... More
Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth electrode, C.I. earth boxes, G.I. watering pipe, G.I. earth strip of adequate capacity and labour.
1
230280
230280
... More
Erection and commissioning of all sub-station equipments
1
119938
119938
... More
Protection units i.e fire extiguishers, T&P for substation as per direction of E.I.C
1
143925
143925
... More
Testing of all equipments of sub-station at manufacturer’s works
1
71963
71963
... More
Construction of foundations of Transformers and panels
1
143925
143925
... More
Fencing around outdoor Transformers
1
143925
143925
... More
NOC From Electrical safety department
1
23987
23987
... More
MCC CUM Starter Panel for IPS 2mm thick MS sheet fabricated factory wired dust & vermin proof cubical and floor mounting type control panel comprising of following. Incoming Panel (2 from Transformer and 1 from DG Set) with following specificationsReputed make cubical floor mounting extensible type panel complete with 4Pole air insulated aluminium Bus bar of 400 Amp. with Incommer feeder from hydel meter and DG Sets with 315A,50KA,MCCB 4 pole,Al BusBars, Digital Multifunction meter compatable to SCADA, metering, Protection CT's, IDMT 3O/C&1 E/F,indicating lamps,control fuse ,wiring etc.complete in all respect Housed in sheet steel cubical panel fitted with all above Load Distribution panel Floor mounting extensible type cubical panel with common aluminium bus bar for 3 phase and one neutral comprising of suitable MCCB with over load trip, manual On/Off arrangement,indicating lamp, Ampere meter of suitable capacity, selector switch and internal wiring complete in all respect.(For 4 Nos. Pumps,1 for screens, 1 for Lighting, 1 for APFC ),SUITABLE SIZE CAPACITOR Bank, Spare feeder for each 1 type,Spare feeder of 32 Amp.x2Nos
1
647662
647662
... More
Suitable VFD starter For 24 X7 Running Hour with RS 485 Port suitable for integration with RTU to operate 40 HP or suitable size submersible pump set & control panel with PMU to meet the basic requirement of motor protections such as No volt and under voltage protection and thermal over load protection. panel are equipped to take signals from the thermistor in the windings, the seal monitor and the Reverse rotation trip device and automatic start/stop device according to level in the sump.
4
95950
383800
... More
The Vertical submersible non clog pump should be single stage having two vanes semi open shrouded impeller coupled with submersible motor of 40 HP or suitable size Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 100 mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material- Casing & suction Bowl: CI IS 210 FG 260 with suitable coating inside casing of 500 DFT, suitable for protection against corroison, erosion and prevent oxidation. Impeller: Duplex stainless steel CD4MCu (Chromium24.5% minimum, Carbon≤0.04%) as per ASTM A890 Gr1A or DIN 1.4474-EN 10088,Hardness 220-260 BHNPump Shaft: Stainless Steel: AISI 410 Wear Ring:/Neck Ring: Duplex stainless steel CD4MCu (Chromium 24.5% minimum , Carbon≤0.04%) its hardness to be 50 BHN less than impeller hardness'Pump and line shaft Sleeve: Stainless Steel with Ceramic coating strainer: SS 304 Coupling between Pump & Starter: Flexible Pin Bush Type Bearings : Anti friction L-10 with 60000 Hrs life Discharge of pump=65 lps Speed=1450Guide rail system of SS 316 for 40 HP or suitable size submersible pump sets comprises of guide pipe ,Pedestal, bracket, upper guide rail holder and lifting chain with D-Sackle etc complete for above pump set..
4
861202
3444808
... More
PLC Compatible Actuator based suitable for Sluice Valve 200 mm dia (Material DI)
4
143925
575700
... More
PLC Compatible Actuator based suitable for Sluice Valve 300 mm dia (Material DI)
1
206292
206292
... More
Reflux valve 200 mm dia N.B.(Material DI)
4
21055
84220
... More
Dismantling joints.
4
33583
134332
... More
Piping including flanges, S.S. Nut Bolt and Rubber packing etc. complete
1
465453
465453
... More
CE/UL Certified pressure transmitter for each Pumps with necessary fittings
5
47975
239875
... More
Suitable Electro magnetic flow metersuitable to measure 0 to 15 MLD flow to be fitted in 300 mm dia main header line having following technical specification.
1
249470
249470
... More
Errection, commissioning,Testing charges of electromagnetic flow meter
1
33583
33583
... More
SITC of E.O.T. crane of 2 Tonne capacity along with gantry girders, chain pulley block and geared trolley suitable for 10 m span 15m clear lift complete in all respect for pump house. Detailed specifications are as below confirming to relevent I.S.
1
239875
239875
... More
Installation & Commissioning of all 4 Nos. Pump set, starters,Piping & Valves, Gauges as mentioned in above.
1
169532
169532
... More
Painting of piping with two coat enamel paint.
1
47975
47975
... More
Radar type level Transmitter for wetwell and screen channel
2
115140
230280
... More
Light wiring of pump house L.T. control room including exhaust fan(2 Nos), Steel tubular poles (4 Nos.), LED Lights of suitable capacity
1
143925
143925
... More
S.I.T.C of suitable for handling peak capacity MultiRack mechanical bar screen having 20 mm clear gap between screen bar of S.S. 316 flat shall be 50mmx10mm size or any other suitable and angle of installation 70-80° duly followed with conveyor belt system including electric motor, starter, cable etc of suitable size in width
1
2115697
2115697
... More
S.I.T.C. of suitable manual bar screen for handling peak capacity having 20mm clear gap between screen bar of S.S.316 flat shall be 50mmx10mm size and angle of installation 45°
1
197273
197273
... More
S.I.T.C. of PLC/SCADA Compatible Actuator operated C.I.Sluice gate confirming to IS13349/92 or AWWA AC-501 having F shaped wall thimble rising spindle type flush bottom closure at upstream and downstream of screen channel
4
283053
1132212
... More
Supply of silent type DG set , engine ,alternator capable of developing 100 KVA at 415+6% ,50Hz AC at.8 P.F. lagging and self exciting coupled with suitable BHPdiesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per the design.
1
1043936
1043936
... More
Suitable AMF panel floor mounting type comprising of Ammeter/ Voltmeter with selector switch, power factor meter, short circuit protection of main supply, thermal over load protection, main supply voltage monitor short circuit protection relay, selector switch auto / manual/off, indicating lamps, push button start / stop / re-set etc.
1
124675
124675
... More
DG sets cables
1
33583
33583
... More
Automation of Units of SPS
-
-
-
... More
CE & UL Certified RTU/PLC with redudant CPU & Power Supply in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified. for SPS to store and transmit data on GSM Backbone. GSM/GPRS backbone. RTU/PLC designed with logic to transfer data at multiple stations as specified
1
550000
550000
... More
GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges.
1
30000
30000
... More
Intelligent energy meters
1
25000
25000
... More
Auto phase reversal Unit 315 Amp
1
140000
140000
... More
CE/UL Certified Surge Protector for control panel
1
15000
15000
... More
CE/UL Certified 7" HMl touch screen suitable to communicate with PLC/RTU,Local display and control of Parameters
1
30000
30000
... More
Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 V and power equipments
1
200000
200000
... More
Complete cabling for SPS
1
100000
100000
... More
Security Survelliance IP Camera
4
20000
80000
... More
Installation,Testing and commissioning
1
20000
20000
... More
CESSPOOL VEHICLE / CLEANING VEHICLE
-
-
-
... More
Purchasing of Cesspool Vehicle for Cleaning / Equipment and Flushing Van
1
1500000
1500000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%