Directorate Of Technical Education Tender

Providing and laying factory made chamfered edge cement concrere paver blocks of required strength, thickness & size/shape, made by table vibratory method to attan supperior smooth finish using PU or equivalent moulds, laid in required Gray colour & pattern over 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator. All complete as per manufacturer's specification and direction of Store officer: a) 80mm thick cc paver block of M-30 grade with approved colour, design and pattern. b) Filling the joints with jamuna sand/local snad and cutting of paver blocks as pre required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. c) Brick edging 7cm wide 11.4 cm deep in plinth protection with common burnt clay FP 5 (Non modular) bricks of class desgination 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)