State Agricultural Produce Markets Board Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

State Agricultural Produce Markets Board Tender

Works

Civil Works Others

Eprocure

Ghaziabad, Uttar Pradesh

Opening Date1 Jun 2019

Closing Date11 Jun 2019

Tender Amount₹ 4,20,49,477

Email

Download

Costs

EMD
₹ 23,02,000
Document Cost
Refer Documents
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2019_RKUMP_349509_1
Bid Award Id
View
Tender No
956
Tender Authority
State Agricultural Produce Markets Board View
Purchaser Address
-
Website
http://http://upmandiparishad.upsdc.gov.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-11.6 MBTendernotice_1.pdf

NIT

BOQ-1670.2 kBBOQ_504745.xls

financial bid

Document-1551.4 kBtender956.pdf

TENDER DOCUMENTS

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Earth Work in filling by carted of earth from including distance 5 km. from the site of work including atering, ramming and dressing etc. 20 cm. layers required for proper completion of the work as per direction of E/I. PWD

Quantity272.6

Rate-

Amount 239

Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL Anti termite treatment and creating a chemical barrier under and around the columns pits, wall trenches basement excavations top surfaces of nplinths filling junctions of walls and floors along the external perimeter of building , expansion joints surroundings of pipes and conduits etc. complete plinth area of the building at ground floor only shall be measured as per IS 6313 ( part -II ) Aldrine emulsifisble concentrate or any other approved material such as chloropyriphos or Heptrachlor or chlordance will be used. The rates of application of chemicals emulsion shall be as follows: as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment ).

Quantity-

Rate-

Amount -

Treatment for Masonary & foundation 5 liters per / 100 Sqm.

Quantity-

Rate-

Amount -

Back fill in immediate contact with foundation 7.5 liters per / 100 sqm.

Quantity-

Rate-

Amount -

Treatment of top surface of plinth filling 5 liters per / 100 sqm

Quantity-

Rate-

Amount -

Treatment junction of wall and the floor 7.5 liters per / 100 sqm

Quantity-

Rate-

Amount -

Treatment of soil along External perimeter of building 7.50 liters per / 100 sqm.

Quantity-

Rate-

Amount -

Treatment of soil under Apron along external perimeter 5 liters per / 100 sqm

Quantity1109.41

Rate-

Amount 200

2 cm (3/4") thick damp proof course with cement and approved coarse and 1:2 with and including water proofing materials as ordered by the Engineer-in charge in the proportion as specified by the manufactures including supply of all material ,labour and T&P etc. required for proper completion of the work including proper curing and shuttering as necessary. PWD-361

Quantity38.1

Rate-

Amount 200

Painting on DPC or over roof slab two coat of air blown bitumen S-35(60/70) or S-90 (80-100) grade @ ne k./sqm. Including cost of fuel wood other materials, labour T&P etc. required for proper completion of the work. PWD-362+363

Quantity38.1

Rate-

Amount 100

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand:8 graded stone ballast 40mm.nominal size) including supply of all materials.lablour and T&P etc.required for proper competion of the work and curing complete, also including cost of formwork in foundation and floors. PWD-281

Quantity107.61

Rate-

Amount 5200

Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand:10 graded brck ballast 40mm.nominal size) including supply of all materials.lablour and T&P etc.required for proper competion of the work and curing complete, also including cost of formwork in foundation and floors in sunken portion. PWD-274

Quantity25.99

Rate-

Amount 3050

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. (a) Lintel PWD-283

Quantity44.95

Rate-

Amount 7400

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in slab of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. PWD-284

Quantity423.92

Rate-

Amount 7700

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in lighter beam of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. PWD-285

Quantity230.66

Rate-

Amount 7900

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in raft foundation and footings of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. PWD-287

Quantity131.52

Rate-

Amount 6650

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in column of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. PWD-289

Quantity103.54

Rate-

Amount 8000

M-150 Class brick work in 1:6 Cement and fine sand in FM 1.25 mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I. PWD - 303

Quantity23.67

Rate-

Amount 3950

M-150 Class brick work in 1:6 Cement and fine sand in FM 1.25 mortar in super structure including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I. PWD 303+309+310

Quantity355.93

Rate-

Amount 4490

Same as item No. 13 but extra for second floor.

Quantity266.2

Rate-

Amount 44.9

Same as item No. 13 but extra for third floor.

Quantity152.45

Rate-

Amount 89.8

Class 150 brick work in super structure in half brick wall with 1:4 cement coarse sand mortar including necessary cutting and moulding . The cost of including all materials, labour, T & P and scafolding etc. complete. PWD-305(b)+309+310+310(a)

Quantity133.11

Rate-

Amount 5030

Providing & fixing ISI : 3564 Aluminium die cost body tubulor type universal hydraulic door closer, Hardwyn make(classic queen) or equivalent with necessary accessories and screw etc. complete . DSR 9.84

Quantity68

Rate-

Amount 353.4

Providing and fixing aluminium sliding bolts ISI marked anodised (anodic coating not less than grade AC as per IS:1868) transparent of dyed to required colour or shade with nuts and screws etc.complete. DSR 9.96 16mmx250mm

Quantity20

Rate-

Amount 172.15

Providing and fixing aluminium tower bolts ISI market anodised (anodic coating not less than grade AC 10 as per IS: 1868) trasparent of dyed to required or shade with necessary screws etc. complete. DSR 9.97 200mm Long

Quantity20

Rate-

Amount 69.3

Providing and fixing aluminium handle ISI market anodised (anodic coating not less than grase AC as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete: DSR 9.100 100mm Long

Quantity49.55

Rate-

Amount 41

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) Wrought to required shap as necessary bending for proper completion of the work and including supply of steel its wasteage bed hooks and authorised overlapping shall be measured . PWD 504

Quantity1426.78

Rate-

Amount 5600

Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm angle iron 3.15mm (1/8") gusset plates at the junctions and corners,, hooks at top 25mm (1") dia pulleys at bottom, 40x40x6mm angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No mateiral shall be issued by deptt.) all necessary fittings complete, including applying a priming coat of approved steel primer. PWD-519

Quantity6.12

Rate-

Amount 2598

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the sides of waist slab with suitable arrangement as per approval of ENgineer incharge (for payment purpose only weight of stainless ssteel members shall be considred excluding fixing accessories such as nuts, bolts, fastenrets. etc.) dsr-10.28

Quantity1080

Rate-

Amount 429.9

Supplying and fixing of rolling shutters of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackts, side guides and arrangements for inside and outside locking with push an dpull operation complete but excluding the cost of top cover and springs.

Quantity-

Rate-

Amount -

80x1.25 mm M.S. laths with 1.25 mm thick top cover PWD-520

Quantity24.86

Rate-

Amount 1600

Providing and fixing top cover for roling shutters 2.50 meter wide. PWD-522

Quantity3

Rate-

Amount 1200

Providing and fixing 27.5 cm. long wire spring grade 2 for rolling shutters PWD-521

Quantity6

Rate-

Amount 500

Providing and fixing ball bearing for rolling shutters. PWD-523

Quantity6

Rate-

Amount 550

Supply and fixing of kota stonein flooring 20 mm thick and joint filled with 1:2 cement and coarses and with approved colouring materials to be given an even shade with 12mm base coat (bedding) of 1:2 cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, T&P etc. required for proper completion of the work. PWD-14.26

Quantity112.64

Rate-

Amount 950

Supply and fixing 10 to 12mm brick kota stone tiles in skirting o dado laid with 1:2 cement and approved coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, T&P etc. required for proper completion of the work. PWD-14.26.3

Quantity82.93

Rate-

Amount 920

Supply and fixing of vitrified tiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. complete. PWD-Pg. 39 New Item

Quantity1466.26

Rate-

Amount 1300

Providing and fixing quality ceramic glazed floor tiles 300x300 mm ( thicknes to be specified by the manufacturer) of 1 st quality conforming to IS: 15622 of approved make in colours such as white, lvory ,grey, Fume Red Browm, laid on 20 mm thick cement Mortar 1:4 (1cement:4 Coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.DSR-11.37

Quantity127.72

Rate-

Amount 626.4

Providing and fixing quality ceramic glazed wall tiles conforming to IS:15622( thickness to specified by the manufacture)of approved make in all colours , shades excepted burgundy, bottle green,black of any size as approved by Engineer -in-charge in skirting ,risers of steps and dado over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with gry cement slurry @ 3.3.kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR-11.36

Quantity391.23

Rate-

Amount 677.75

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 8.2

Quantity-

Rate-

Amount -

Granite of any colour and shade. 8.2.2

Quantity-

Rate-

Amount -

Area of slab upto 0.50 sqm 8.2.2.1

Quantity41.85

Rate-

Amount 3050.25

Area of slab over 0.50 sqm. 8.2.2.2

Quantity686.85

Rate-

Amount 2833.1

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of with up to 150 mm with epoxy resin based adhesive including cleaning etc. complete. 8.4

Quantity17.25

Rate-

Amount 242.3

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen sink in kitchen platform, vanity counters and similar location in marble / granite/stone work including necessary holes for pillar taps etc. including rubbing and polisheg of cut edges etc. complete. 8.5

Quantity15

Rate-

Amount 389.4

Chequrred precast cement concrete tiles 22 mm thick in footpath & court yard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand ) DSR-11.20

Quantity-

Rate-

Amount -

Medium shade pigment using 50% white cement 50% grey cement 11.20.2

Quantity33.75

Rate-

Amount 799.5

Providing and fixing wooden flooring of 25mm thick with pre laminated flat pressed three layer Engineered Hard Wood Flooring on Stage of exterior grade including edge profiles as may be required in desired shape and size of approved colour and texture. including front cladding of stage riser 38mm thick parquet (wood block) flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm nominal size) to be paid separetely coated with thin layert of hot bitumen (blown type) @ 2.45 kg per sqm including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planded, levelled smoth and finished complete. DSR-11.33.1

Quantity142.97

Rate-

Amount 2816

12mm cement plaster with cement and coarse sand of 2.75 fineness modulus in 1:6 (1 cement : 6 coarse sand) over brick work minimum thickness not to be les than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work. PWD-586+ difference

Quantity3730.03

Rate-

Amount 155

Add for extra labour to all item of plaster on rough face

Quantity3730.03

Rate-

Amount 15

12mm cement plaster with cement and coarse sand of 2.75 fineness modulus in 1:4 (1 cement : 4 coarse sand) over brick work minimum thickness not to be les than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work. PWD-584 new item

Quantity1834.72

Rate-

Amount 165

6 mm Ceiling plaster cement & Fine sand in F.M not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all materials, labour, T & P and scafolding etc. complete. pwd-584+587

Quantity2576.26

Rate-

Amount 115

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar,Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (PWD 649+650)

Quantity10772.07

Rate-

Amount 65

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR-13.80

Quantity10772.07

Rate-

Amount 60

Finishing walls with water proofing cement paint of approved make and quality on new work with two coats to give an even shade.Including supply of all material labour nad T&P etc, required for propoer completion of the works and each coat of water proof cement paint after the first two coats to give an even shade. PWD-660+661

Quantity696.68

Rate-

Amount 57

Providing and Fixing 15 mm thick densified tegular edged eco friendlylight weight calcium silicate false ceiling tiles of approved texture ofsize 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Quantity1027.43

Rate-

Amount 1363

Painting or varnishing work in small areas or new wood work with two coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paiint for varnish incluidng supply of all materials, labour, T&P etc. required for proper completion of the work. Paint to be used confirm the ISI No. 103.1950 PWD-641+642

Quantity40.16

Rate-

Amount 80

Providing and fixing brick coba 12mm thick laid with M 150 class brick bat coba 7.50 cm. thick with gap of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound sprading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand finished smooth & top pmashed false square 30 cm. x 30 cm. and side wall parapet shall be monotythic plaster wall upto 30 cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all materials, labour, T&P etc. complete for proper completion of the work. PWD-Chapter 11 pg. no. 33 new item.

Quantity861.05

Rate-

Amount 900

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :

Quantity-

Rate-

Amount -

Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

Quantity-

Rate-

Amount -

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.

Quantity-

Rate-

Amount -

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

Quantity-

Rate-

Amount -

IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). DSR-22.3

Quantity130.11

Rate-

Amount 460.35

Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : DSR-20.3

Quantity-

Rate-

Amount -

300 mm dia piles 20.3.1

Quantity1327.5

Rate-

Amount 1950.15

Extra over item No. 45 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid). 20.4

Quantity-

Rate-

Amount -

300mm dia piles 20.4.1

Quantity221.25

Rate-

Amount 1392.2

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinfoorced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Enginner-in-Charge. 9.119

Quantity125.75

Rate-

Amount 399.25

Providing & fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm . 19mm for styles and 15x15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on eigher side forming styles: and 5 mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mmshall be tapered in 45 degree on the inner side to form top and bottom raiil and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided eigher side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer's specification& drawing. 9.120

Quantity-

Rate-

Amount -

30 mm thick pre laminated PVC door shutters. 9.120.2

Quantity34.51

Rate-

Amount 2941.75

Providing and fixing aluminium work for doors , windows, ventilators and partitions with extuded built up standard tubular sections/ appropraite Z section and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansions hold fasteners including necessary filling up to gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust fee, staight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling . C.P.brass /stainless steel screws , all complete as per architectural drawing and the directions of Engineer -in - charge. ( Glazing and paneling to be paid for separately) 21.1

Quantity-

Rate-

Amount -

Powder coated aluminium ( minium thickness of powder coating 50 micron ) 21.1.1.2

Quantity412

Rate-

Amount 349.9

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness 21.3.1

Quantity25.93

Rate-

Amount 674.75

Design, supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured

Quantity28.69

Rate-

Amount 6305

Providing and supplying Spandrel Glass Panels comprising of 6mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge.“For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. DSR-25.6

Quantity197.16

Rate-

Amount 2546.8

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 355.20 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR-21.1.1.2

Quantity2988

Rate-

Amount 349.9

Providing & Installation of 16 mm thick Microcell Polycarbonate panels & will be 16mm thick (min.) single panel. Panel Width shall not be less than 1040 mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. The panels shall be uniform in color with an integral Microcell/Multicell. Panels shall be manufactured with Vertical Standing Seam with maximum height 15mm at both sides of the panel. Snap-on connector to interlock the panels shall have a double tooth grip-lock locking mechanism to ensure maximum uplift capability. Panel shall be with additional End- cap/Aluminum U-Profile (mill finish) for ends. Panels shall be co-extruded UV protected. Panel shall be fixed over structural steel / MS purlin (will be paid as extra) conforming to the detail technical specifications enclosed and as per approved shade / colour .Design, Preparing shop drawings, obtaining consultants approval, supplying, fabricating , delivering at site, erection, including all temporary staging and supporting work and making all structural steel work in accordance with the design drawings using TATA Tubular sections or equivalent .

Quantity-

Rate-

Amount -

The rate of steel work shall include cutting, grinding, machining, assembly, welding, jointing, cost of fasteners (nuts, bolts etc), The rate shall also include one coat of primer after properly cleaning the steel surface and final coat with polyester powder coating and directions of Engineer-In-Charge. DSR

Quantity126.5

Rate-

Amount 1825.7

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm DSR 13.45.1

Quantity1064.43

Rate-

Amount 137.1

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPTI) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848 DSR 7143

Quantity100.31

Rate-

Amount 1820

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 250x10 mm DSR 9.74.1

Quantity-

Rate-

Amount -

250 mm Long N.S

Quantity40

Rate-

Amount 285

200mm Long N.S

Quantity28

Rate-

Amount 228.9

Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125mm N.S

Quantity136

Rate-

Amount 155.8

Providing and fixing bright finished brass door latch with necessary screws etc. complete : a) 9.75.1 300x16x5 mm DSR 9.75.1

Quantity40

Rate-

Amount 206.6

b) 9.75.2 200x16x5mm 9.75.2

Quantity28

Rate-

Amount 196

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. DSR 9.82

Quantity68

Rate-

Amount 78.1

Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587 DSR-9.155

Quantity18.75

Rate-

Amount 1051.2

2.5cm (') thick 1:2:4 plain cement concrete floor wioth cement,approved coarse sand and 2cm (3/4") graded approved stone laid in panels finishing with 3mm .(1/8") flooring coat of neat cment or cement and marble dust in concrete consisting over&including 8cm.(3") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals, if any and giving them a uniform finish, incluidng supply of all materials, labour, T&P etc. required for proper completion of the work. pwd-601

Quantity120.19

Rate-

Amount 540

Sanitary Installation

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White viterious china Orissa pattern W.C. pan of size 580x440mm with integral type of foot rests. 17.1.1

Quantity10

Rate-

Amount 3179.7

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC pan with ISI marked white solid plastic seat and lid.

Quantity14

Rate-

Amount 3111

Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required white viterious china wash basin size 630x450 mm with a single 15mm C.P. brass pillar tap. 17.7.2

Quantity30

Rate-

Amount 1838.7

Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth white Agaria Marble stone. 8.10.1

Quantity12

Rate-

Amount 2577

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. 17.8

Quantity18

Rate-

Amount 4697.6

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm 17.32

Quantity30

Rate-

Amount 685

Providing and fixing PTMT Bottle Trap for Wash basin and sink bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 17.70.1

Quantity30

Rate-

Amount 267.5

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(sink & urinal) 17.70.2

Quantity18

Rate-

Amount 278.05

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. 17.71

Quantity30

Rate-

Amount 125.4

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms 17.72

Quantity30

Rate-

Amount 179.75

Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore. 18.49.1

Quantity24

Rate-

Amount 338.25

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore 18.51.1

Quantity5

Rate-

Amount 448.2

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15mm nominal bore. 18.53.1

Quantity66

Rate-

Amount 432.9

Providing and fixing toilet paper holder CP brass. 17.34.1

Quantity24

Rate-

Amount 350.65

Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm long towel rail with total length of 645 mm, width 78mm and effective height of 88mm, weighing not less than 190 gms. 17.73.2

Quantity6

Rate-

Amount 384.65

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge 17.16A

Quantity14

Rate-

Amount 231.85

Providing and fixing CP Brass shower rose with 15 or 20 mm inlet 100mm diameter. 18.22.1

Quantity6

Rate-

Amount 65.2

INTERNAL DRAINAGE.

Quantity-

Rate-

Amount -

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S. 17.60.1.1

Quantity46

Rate-

Amount 941.35

100 mm inlet and 75 mm outlet centrifugally cast (spun) iron S&S. 17.60.2.2

Quantity8

Rate-

Amount 712

Providing and fixing soil, waste, vent and rain water pipes centrifugally cast (spun) iron S&S pipe. 17.35

Quantity-

Rate-

Amount -

100mm dia cast (spun) iron S&S pipe. 17.35.1.2

Quantity660

Rate-

Amount 838.7

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. for 100mm dia pipe. 17.37.1

Quantity190

Rate-

Amount 152.3

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100x100x100mm 17.38.1

Quantity-

Rate-

Amount -

Centrifugally cast (spun) iron pipe S&S 17.38.1.2

Quantity72

Rate-

Amount 350.25

Providing and fixing plain bend of required degree. 100mm dia. 17.39

Quantity-

Rate-

Amount -

Sand cast iron S&S as per IS : 3989 17.39.1.2

Quantity49

Rate-

Amount 304.8

Providing and fixing heel rest sanitary bend, in 100mm Centrifugally cast (spun) iron pipe S&S 17.40.1.2

Quantity23

Rate-

Amount 337.55

Providing and fixing double equal plain junction of required degree. 100x100x100x100mm 17.42

Quantity-

Rate-

Amount -

Sand cast iron S&S as per IS - 3989 17.42.1.2

Quantity23

Rate-

Amount 680

Providing and fixing double equal plain junction of required degree. 100x100x100x100mm 17.42 17.43

Quantity-

Rate-

Amount -

Standard cast (spun) iron pipe IS-3989 17.43.1.2

Quantity23

Rate-

Amount 566.9

Providing and fixing single equal plain junction of required degree : 100x100x100mm 17.44.1

Quantity-

Rate-

Amount -

Sand cast iron S&S as per IS - 3989 17.44.1.2

Quantity23

Rate-

Amount 523.6

Providing and fixing single unequal plain junction of required degree 100x100x75mm 17.48.1

Quantity-

Rate-

Amount -

Sand cast iron S&S as per IS -3989 17.48.1.2

Quantity23

Rate-

Amount 627.15

Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete 100mm 17.55.1

Quantity-

Rate-

Amount -

Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete, in 100mm Centrifugally cast (spun) iron pipe S&S 17.55.1.2

Quantity23

Rate-

Amount 466.5

Providing and fixing terminal guard 100mm

Quantity-

Rate-

Amount -

Sand cast iron S&S as per IS - 3989 17.56.1.2

Quantity23

Rate-

Amount 303.75

Providing and fixing collar 100mm. 17.57

Quantity-

Rate-

Amount -

Centrifugally cast (spun) iron pipe S&S 17.57.1.2

Quantity23

Rate-

Amount 319.6

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work 100mm dia cast (spun) iron S&S pipe. 17.65.1

Quantity610

Rate-

Amount 37

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead 100 & 150mm diameter pipe. 18.28.1

Quantity2112

Rate-

Amount 204.4

Providing and fixing PTMT grating of approved quality and colour circular type. 18.58.1

Quantity-

Rate-

Amount -

100 mm nominal dia 18.58.1.1

Quantity49

Rate-

Amount 29.8

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround SW including bed concrete as per standard design 19.2.1

Quantity-

Rate-

Amount -

Note: This work shall be done all-round CI pipe at ground floor's toilet. 100mm diameter

Quantity50

Rate-

Amount 566.9

Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS:13592 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for thermal expansion. (i)Single socketed pipes. 100mm diameter. 12.41.2

Quantity216

Rate-

Amount 215.05

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion. 12.42

Quantity-

Rate-

Amount -

Coupler -110 mm diameter 12.42.1.2

Quantity9

Rate-

Amount 93.4

Bend -87.5 deg -110 mm diameter 12.42.5.2

Quantity18

Rate-

Amount 102.9

Shoe -110mm shoe 12.42.6.2

Quantity9

Rate-

Amount 89.2

Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete 110mm dia. 12.43.2

Quantity72

Rate-

Amount 165.05

P/F M.S. cap 100 mm dia 7760

Quantity10

Rate-

Amount 109.2

WATER SUPPLY INSTALLATION

Quantity-

Rate-

Amount -

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. 17.3

Quantity2

Rate-

Amount 35

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 18.7 Internal work -Exposed on Wall

Quantity-

Rate-

Amount -

20 mm nominal outer dia pipes 18.7.2

Quantity12

Rate-

Amount 163.75

25 mm nominal outer dia pipes 18.7.3

Quantity25

Rate-

Amount 196.7

32 mm nominal outer dia pipes 18.7.4

Quantity35

Rate-

Amount 263

40 mm nominal outer dia pipes 18.7.5

Quantity25

Rate-

Amount 350.8

50 mm nominal outer dia pipes 18.7.6

Quantity10

Rate-

Amount 499.2

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge. 18.8 concealed work including cutting chases and making good the wall etc. 18.8

Quantity-

Rate-

Amount -

15 mm nominal outer dia pipes 18.8.1

Quantity60

Rate-

Amount 224

20 mm nominal outer dia pipes 18.8.2

Quantity110

Rate-

Amount 259.2

25 mm nominal outer dia pipes 18.8.3

Quantity90

Rate-

Amount 303.5

32 mm nominal outer dia pipes 18.8.4

Quantity26

Rate-

Amount 375.7

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) For roof level DSR Item 18.10

Quantity-

Rate-

Amount -

20 mm dia, nominal bore 18.10.2

Quantity4

Rate-

Amount 204

25 mm dia, nominal bore 18.10.3

Quantity4

Rate-

Amount 225.5

32 mm dia, nominal bore 18.10.4

Quantity4

Rate-

Amount 280.6

40 mm dia, nominal bore 18.10.5

Quantity25

Rate-

Amount 358.6

50 mm dia, nominal bore 18.10.6

Quantity15

Rate-

Amount 109.2

65 mm dia, nominal bore 18.12.7

Quantity40

Rate-

Amount 411

Painting with synthetic enamel paint of approved drand and manufacture to give an even shade DSR Item 13.61

Quantity-

Rate-

Amount -

Two more coast on new work 13.61.1

Quantity53

Rate-

Amount 71.3

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 18.17

Quantity-

Rate-

Amount -

25mm dia, nominal bore 18.17.1

Quantity5

Rate-

Amount 389.65

32 mm dia, nominal bore 18.17.2

Quantity2

Rate-

Amount 455.7

40 mm dia, nominal bore 18.17.3

Quantity2

Rate-

Amount 532

50 mm dia, nominal bore 18.17.4

Quantity2

Rate-

Amount 109.2

Providing and fixing gun metal non- return valve of approved quality (PN 1.6) 18.19

Quantity-

Rate-

Amount -

80 nominal bore 18.19.6.2

Quantity2

Rate-

Amount 2679.5

Providing and fixing brass stop cock of approved quality 18.16

Quantity-

Rate-

Amount -

15mm nominal bore 18.16.1

Quantity26

Rate-

Amount 236.2

20mm nominal bore 18.16.2

Quantity16

Rate-

Amount 255.15

Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2

Quantity45

Rate-

Amount 61.5

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 18.46

Quantity-

Rate-

Amount -

15mm nominal bore 18.46.1

Quantity8

Rate-

Amount 134.45

20mm nominal bore 18.46.2

Quantity8

Rate-

Amount 155.55

25mm nominal bore 18.46.3

Quantity8

Rate-

Amount 187.25

32mm nominal bore 18.46.4

Quantity8

Rate-

Amount 219

40mm nominal bore 18.46.5

Quantity8

Rate-

Amount 271.85

50mm nominal bore 18.66.1

Quantity8

Rate-

Amount 350.25

Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominla bore. 18.49.1

Quantity26

Rate-

Amount 338.2

Constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 fine sand) for sluice valve, with C.I. surface box 100mm, to diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. 18.33.1

Quantity1

Rate-

Amount 6233.1

SIGNAGE

Quantity-

Rate-

Amount -

Manufacturing,C159 supplying and fixing retro reflective C168overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along theperiphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

Quantity26

Rate-

Amount 4297.2

BOUNDARY WALL

Quantity-

Rate-

Amount -

Excavation in foundation in ordinary soil ( lomaclay or sand ) including lift upto 1.5 m and lead upto 30 m . And including filling watering and ramming of excavated earth into space between the building and the sides of the foundation trenches or into plinth and removal and disposal of surplus earth as directed by Engineer in charge upto a distance of 30m . from the foundation trenches including all T&P phowarah and basket etc. complete.

Quantity385.31

Rate-

Amount 95

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand:8 graded stone ballast 40mm.nominal size) including supply of all materials.lablour and T&P etc.required for proper competion of the work and curing complete, also including cost of formwork in foundation and floors.

Quantity36.02

Rate-

Amount 5200

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) Wrought to required shap as necessary bending for proper completion of the work and including supply of steel its wasteage bed hooks and authorised overlapping shall be measured .

Quantity20865.82

Rate-

Amount 56

Providing and fixing sheet covering over expansion joints with iron screws as per design. 5.29.1 Fibre cement board 6 mm thick as per IS: 14862. 5.29.1.1 150mm wide metre 128.55 5.29.1.2 200mm wide metre 172.80 5.29.2 Aluminium fluted strips 3.15 mm thick. 5.29.2.1 150 mm wide metre 336.65

Quantity58.5

Rate-

Amount 306.35

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). 5.33.1 All works upto plinth level

Quantity90.76

Rate-

Amount 5866.25

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). 5.33.2 All works above plinth level upto fourth level

Quantity56.47

Rate-

Amount 6597.5

M-150 Class brick work in 1:4 Cement and coarse sand in FM 2.75 mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I.

Quantity69.49

Rate-

Amount 4450

M-150 Class brick work in 1:4 Cement and coarse sand in FM 2.75 mortar in super structure including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I.

Quantity162.99

Rate-

Amount 4990

MS iron work in hevy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary.

Quantity4120.74

Rate-

Amount 64.5

12mm cement plaster with cement and coarse sand of 2.75 fineness modulus in 1:4 (1 cement : 4 coarse sand) over brick work minimum thickness not to be les than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work.

Quantity1756.85

Rate-

Amount 165

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Quantity1756.85

Rate-

Amount 137.1

Painting or varnishing work in small areas or new wood work with two coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paiint for varnish incluidng supply of all materials, labour, T&P etc. required for proper completion of the work. Paint to be used confirm the ISI No. 103.1950

Quantity165.82

Rate-

Amount 80

GATE

Quantity-

Rate-

Amount -

Excavation in foundation in ordinary soil ( lomaclay or sand ) including lift upto 1.5 m and lead upto 30 m . And including filling watering and ramming of excavated earth into space between the building and the sides of the foundation trenches or into plinth and removal and disposal of surplus earth as directed by Engineer in charge upto a distance of 30m . from the foundation trenches including all T&P phowarah and basket etc. complete.

Quantity40.42

Rate-

Amount 95

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. From the site of work and inlcuding watering, dressing etc. labour and T&P etc. required for proper completion of the work saplings of girth upto 30 cm. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. outside the periphery of area cleared.

Quantity1.51

Rate-

Amount 460

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand:8 graded stone ballast 40mm.nominal size) including supply of all materials.lablour and T&P etc.required for proper competion of the work and curing complete, also including cost of formwork in foundation and floors.

Quantity4.76

Rate-

Amount 5200

Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL Anti termite treatment and creating a chemical barrier under and around the columns pits, wall trenches basement excavations top surfaces of nplinths filling junctions of walls and floors along the external perimeter of building , expansion joints surroundings of pipes and conduits etc. complete plinth area of the building at ground floor only shall be measured as per IS 6313 ( part -II ) Aldrine emulsifisble concentrate or any other approved material such as chloropyriphos or Heptrachlor or chlordance will be used. The rates of application of chemicals emulsion shall be as follows: as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment ).

Quantity14.64

Rate-

Amount 200

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in raft foundation and footings of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20.

Quantity9.2

Rate-

Amount 6650

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in column of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20.

Quantity13.46

Rate-

Amount 8000

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. Lintel/ plinth beam

Quantity2.78

Rate-

Amount 7400

R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in T beam slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20.

Quantity25.34

Rate-

Amount 7900

M-150 Class brick work in 1:4 Cement and coarse sand in FM 2.75 mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I.

Quantity2.14

Rate-

Amount 4450

M-150 Class brick work in 1:4 Cement and coarse sand in FM 1.25 mortar in super structure including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I.

Quantity6.14

Rate-

Amount 4990

Class 150 brick work in super structure in half brick wall with 1:3 cement coarse sand mortar including necessary cutting and moulding . The cost of including all materials, labour, T & P and scafolding etc. complete.

Quantity3.5

Rate-

Amount 5180

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) Wrought to required shap as necessary bending for proper completion of the work and including supply of steel its wasteage bed hooks and authorised overlapping shall be measured .

Quantity66.74

Rate-

Amount 5600

12mm cement plaster with cement and coarse sand of 2.75 fineness modulus in 1:4 (1 cement : 4 coarse sand) over brick work minimum thickness not to be les than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work.

Quantity545.6

Rate-

Amount 165

12mm cement plaster with cement and coarse sand of 2.75 fineness modulus in 1:3 (1 cement : 3 coarse sand) over brick work minimum thickness not to be les than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work.

Quantity67.04

Rate-

Amount 175

Supply and fixing of vitrified tiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. complete.

Quantity12.42

Rate-

Amount 1300

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts, wastage etc. and their fittings required for proper completion of the work.

Quantity54.52

Rate-

Amount 56

M.S or iron work for Z section steel windows and ventilator including welding, cutting, jointing etc. all complete as per direction of E/I for openable window.

Quantity111.84

Rate-

Amount 70

M.S. or iron work for grill & stair case railing incluidng supply of all material, labour T&P etc. for the completion of the work.

Quantity3610.66

Rate-

Amount 63.5

Supply & fixing of 3.8 cm. thick sheesham wood part panelled and part glazed door and window cleats and stops and including fixing & adjustment of hinges bolts, locks, handles, spring and or other fittings but excluding their supply and includng painting with two coats of black Japan on all iron fitting if necessary including fixing the glass panes with putty and brads Glass to be 4 mm thick fitting with necessary screws to be supplied by the department.

Quantity3.78

Rate-

Amount 3200

Renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty including supply of all materials, labour, T&P etc. required for proper completion of the work.

Quantity5.6

Rate-

Amount 460

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar,Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials.

Quantity76.42

Rate-

Amount 65

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Quantity768.87

Rate-

Amount 137.1

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 13.52.1 On steel work

Quantity13.46

Rate-

Amount 111.5

Melamine polishing on wood work (one or more coat).

Quantity7.56

Rate-

Amount 72.35

Extra costing of First Floor

Quantity-

Rate-

Amount -

Extra costing of Second Floor

Quantity-

Rate-

Amount -

Extra costing of Third Floor

Quantity-

Rate-

Amount -

Extra costing of Fourth Floor

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.