Rajya Krishi Utpadan Mandi Parishad Tender

Earth filling in plinth including supply of necessary quantity of earth from 8.0Km outside the market yard and also including watering.ramming,dressing etc. complete including etc. supply of all materials, labour, & T&P etc. .

Local sand filling in plinth & under floors including, watering,ramming,consolidation and dressing complete.

Cement concrete with 2 cm gauge stone grit c/sand and cement in proportion of 4:2:1 including supply of all materials,labour and T&P ect. Required for proper completion of the work. (SI 279A)

Finishing walls two coats with extorior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacoreated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work .(SI 31)

12mm thick plaster in 1:4 cement and coarse sand mortor over brick work minimum thickness not to be less than 10mm including supply of all materials labour and T&P etc. required for proper completion of the work (584 -II)

Dismantling of BOE. Pavement including stacking of materials as per directed by E/I wthin a distance of 60m. BSR

Relaying of B.O.E. soling including supply of all material labour & T&P etc. required for proper completion of the work. Labour Only(762b)

Water Bound Macadam Sub-base/ Base (A) W.B.M. Grade-2 Providing ,laying spreading and compacting stone aggregates of specific sizes to water bound macadam Specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100KN in stages to proper grade and camber,applying and brooming,stone screening/binding materials,to fill-up the interstices of coarse aggregates,watering and compacting to the required densitsy grading 2 as per Technical clause 405(2).

Water Bound Macadam Sub-base/Base (A) W.B.M. Grade-3 Providing ,laying spreading and compacting stone aggregates of specific sizes to water bound macadam Specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100KN in stages to proper grade and camber,applying and brooming,stone screening to fill-up the interstices of coarse aggregates, watering and compacting to the required densitsy grading 3 as per Technical clause 405(3).

Mild Steel or Iron work in Plain work such as reinforcment concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bends hooks and authrised overlapping shall be measured. SI 504

Laying Cement Concrete pavement ( C.C. Road Slab) consissting 1:1.5:3 Cement coarse sand and approved 2cm gauge stone grit . Over prepared Sub base grade after its recitifications and bringing it to proper camber and including camber and including supply of all material Labour & T&P etc. required for proper completion of work finished to temp as directed by E/I but excluding cost of material required for rectification of the sub grad. ( SI NO 279 (b)

Supply and liaying of 125 Micron polythene sheet including supply of all materials, labour & T&P etc. required for proper completion of the work.

Providing and fixing bitumen mix filler including supply of all materials labour and T&P etc. required for proper completion of the work.

Class - 150 Brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (305)

Class - 150 Brick work in 1:4 cement and coarse sand mortar in super structure in one brick thick including supply of all materials, labour and T&P etc. required for proper completion of the work. (305+309)

Fabrication of grill /stairs case railing .SI 502C

RCC work with cement approved coarse sand and 20mm gage stone grit in the proportion of 1:2:4 in Lintel excluding supply of reinforcement of steel and its binding but including its fixing and binding the same with 24 BWG GI binding wire and including necessary centering shuttering etc. and also including supply of all material, labour and T&P etc. required for proper completion of work binding wire cost being included in the item. SI 283

Providing and laying Vitrified tiles in floor of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. SL 13 NEW

Dismandtling cement concrete or brick or granotithic floors including base concrete and including stacking of dismantled materials as directed by the E/I. within a distance of 60m.

Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections(galvanized @120grams/sqm, both side inclusive ) consisting ofmain *T* runner with suitably spaced joints to get required length and of size 24x38mm dade from 0.30mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross *T* of size 24x25mm made from 0.30mm thick (minimum) sheet 1200mm long spaced between main *T* at 600mm center to centre to form a grid of 1200x600mm and secondary cross *T* of length 600mm and size 24x25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grits of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grit including required cutting /making opening for services like diffusers, grills, ;ight fittings, fixtures, smoke detectors etc. Main *T* runners to be suspended from ceiling using GI alotted cleats of size 27 x 37 x25 x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvan ised butterfly level clips of size 85x30x0.8mm spaced at 1200mm center along main T bottom exposed width of 24mm of all T-sections shall be prepainted with polyester paint all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore . Chapter 23 -10A

Providing and fixing CP Brass bib cock of approved quality(20.90) (a) 15mm dia nominal bore 400gm IS 8931 (Chapter 23-22)

Providing and fixing CP Brass stop cock of approved quality(20.90) (a) 15mm dia nominal bore 400gm IS 8931(chapter 23-25)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherver required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Supply and fixing of flush doors commericial quality 35mm thick conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts, locks, handle, springs and other fittings but excluding their supply and including painting with two coats of Black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally.

Approximate cost of oxidised Iron fittings including supply of all materials,labour and T&P etc. required for proper completion of the work. (SI 473).

Supply & hoisting of Sintex or equivalent high density polyethyne seamless of piece mounded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work Tank should be ISI marked Sintex or equivalent for 500 litres.

wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt grease loose pieces and prepare smooth.Chapter 15-23 new +24

Applying Painting and Varnishing two coats over previously painted surface and upto 10cm . In width or girth or small not exceeding 0-10sqm. Area after and including preparing w/o in use the surface by thoroughly clearing oil, greased, dirt and other foreign matter and scoured with wire brushed, fine steel/wood.Scrapper , sand papering and knotting including cost of all materials, labour T&P etc. required for proper completion of work. SI 4A+8A

Finishing walls with Putty approved brand and manufacture and of required shade and undacorated wall surface to give even shade overf including curing and cost of all material, labour T&P eetc. Required for proper completion of work.(two coats)