State Agricultural Produce Markets Board Tender

Complete servicing & overhauling of all conveyor’s chain in the line.

Supply /Installation/testing & Commissioning of Evaporator unit capacity: 24.6 KW, Air flow: 12250 m3 /h, Refrigerant: R404a, Evaporation temperature: -4.00C & Room temperature: +20C, 2 Piece Fan, Capacity: 0.69 KW, Air throw approx.: 18 mtr. (MakeGutner/Patton/LUVE/Roller), complete in all respect with copper piping & refrigerant charging.

Supply /Installation/testing & Commissioning of Condensing unit capacity: 23.30 KW, condensing temperature: 500C & Refrigerant: R404a (Make-Bitzer/Emerson), complete in all respect with copper piping & refrigerant charging.

Installation of Evaporators & Condensing unit for Pre-Cooler & Cold Room.

Hermetically sealed single leaf hinged Door of size: 1200 x 2100 mm with 80 mm thick, blade along with front frame. Puff material with density of 40 kg/cu mtr with 0.5mm PPGI cladded on both sides with required accessories

Installation of single leaf hinged Door for Pre-Cooler & Cold Room.

Partition in Pre-Cooler of size: 24.4 Ft (L/D) x 12.2 Ft (W) x 13 Ft. Supply of Puff insulated panel having overall thickness of 50 mm, density of 40 Kg/cu.m (+2), outer side of 0.5 mm GI sheet.

Supply of dis-continuous line manufactured PUF insulated sandwich panel with Top/side /wall panel with outer side of 0.5 mm PPGI sheet & inner side 0.25 mm bare sheet having overall thickness of 50 mm. PUF having density of 40 Kg /cu.m (+2) along with flashing /roof flashing, corner flashing, complete along with required accessories to fix the PUF panel.

Hermetically sealed single leaf hinged Door of size: 1200 x 2100 mm with 80 mm thick, blade along with front frame. Puff material with density of 40 kg/cu mtr with 0.5mm PPGI cladded on both sides with required accessories.

S/I/T/C of Evaporator unit, light weight aluminum case duly powder coated rust proof paint, along with reversible drain tray. For temperature controlled in Puff area of vegetable sorting / grading area. Temperature range: +240C @ 12.0 KW cooling capacity, high air throw around 12 mtr, fan motors make (EBM-Germany). No of fans & size: 04 x 350 mm. Evaporation temperature +100C. Evaporator make: (Gutner /Patton /LUVE / Roller), complete in all respect with copper piping & refrigerant charging.

S/I/T/C of Condensing unit, cooling capacity: 12.0 Kw, condensing temperature +500C & refrigerant R404a (Make-Bitzer / Emerson), condenser coil grooved type, condenser fan axial type, condenser body is made of CRC sheet, duly powder coated rust proof paint. Fitted complete along with gas drier filter, freon pressure gauges, fan guard, suction & liquid line, unit come with a standard weather proof housing. Complete in all respect with copper piping & refrigerant charging.

“ROOTS”-Make Hand Operated Automatic Scrubber Drier Floor Cleaning Machine. Machine are handy operated scrubber-drier for quick, economical & effective cleaning of all type of hard floors. The extremely compact & robustly constructed machines guarantee a high degree of maneuverability, easy handling & good visibility. The height adjustable operating handle & the adjustable brush drive are ideal for fatigue-free operation. No of brushes:1, Brush diameter: 43 cm, Effective suction width: 75 cm, power brush motor: 800 watt, power suction motor: 1000 watt, working speed: 4 Km/hr, brush speed: 280 Rpm minimum, Clean & Dirty water tank: 22 Ltr. Dimension of the machine: (L) 100 cm x (W) 45 cm x (H) 87 cm. brushes can be changed quickly without the need for any tools at the push of a button.

Supply of Stainless Steel-304 grade fruit holding cages. the plastic fruit crate inside the Cages /Hot water treatment unit.

S/I/T/C of Lifting arrangement mechanically for holding the stainlesssteel cages, lifting in & out (Up & Down) during treatment, fitted complete along with gear, motor & mild steel wire rope for Hot water treatment unit. Gear Make: “BONFIGLIOLI”, Motor Make: “SIEMENS /ABB” of suitable capacity.

Hydraulic Hand Pallet Truck: Hydraulic System: The manually operated lift pump is simple & reliable in operation. The hard chrome polished piston is resistant to rust, scratches and strokes. The pump is double sealed which secures efficiently against leakages and prolongs the life of the packing. The lift cylinders are welded directly on to the pump, and the oil reservoir is welded around the lift cylinder. This imparts efficient tightness and eliminates tube and hose connections the hand pallet truck is equipped with a neutral position valve as standard. When the drawbar is moved slowly, the neutral position ensures that the load is not lifted (Driving position). When the drawbar is moved a little faster, the load is lifted the usual way (lifting function). The system is simple, needs no adjustment and is reliable in operation. 6 no nylon wheels, powder coated finish. Capacity: 500 Kg Handle swivel: Standard. Wheels: two nos. nylon wheels with sealed bearing at front & 4 roller tandem wheels at back side. Lifting 12 mm/stroke. Lubrication grease nipple: For all movable part for easy Maintenance. Make: Nilkamal /Supreme /Easy Move /Godrej /Equivalent

Industrial Mancooler Tubular Drying Fan Size:30” (750 mm) In this type of Mancooler, the impeller and Motor Assembly is mounted in the circular casing with suitable stand arrangement. This can be moved from place to place easily even in rough floor areas. The Air flow can be adjusted vertically for any convenient Position. Necessary protection guards are also provided on both sides of the casing, 2.0 HP, 1400 RPM, Total air delivery: 37000 M3 /Hr. Make: Almonard /Equivalent