Rajya Krishi Utpadan Mandi Parishad Tender

S/I/T/C of Evaporator unit for Puff Panelling temperature-controlled area (Make-Patton / Luve): light weight aluminium case duly powder coated rust proof paint, along with reversible drain tray, for temperature controlled in Puff area of Mango sorting / grading area. Temperature range: +240C @ 12.0 KW cooling capacity, high air throws around 12 mtr, fan motors make (EBM-Germany). No of fans & size: 04 x 350 mm. Evaporation temperature +100C. complete in all respect with copper piping & refrigerant charging. APPD

S/I/T/C of Condensing unit required for evaporator unit (Make-Emerson / Bitzer): cooling capacity: 12.0 Kw @ condensing temperature +500C & refrigerant, condenser coil grooved type, condenser fan axial type, condenser body is made of CRC sheet, duly powder coated rust proof paint. Fitted complete along with gas drier filter, freon pressure gauges, fan guard, suction & liquid line, unit come with a standard weather proof housing. Complete in all respect with copper piping & refrigerant charging. APPD

S/I/T/C of Puff Panelling in complete internal side of Pack House for temperature controlled (Make-Lloyd / Dignus): Puff Insulation: The insulation material shall be CFC free PUF with CLOSED CELL CONTENT of 90% to 95% minimum. This foam is injected using high-pressure equipment in a precise ratio and proportion and auto cohesively laminated. The density of foam shall be 40 ± 2 kg/m 3, with thermal conductivity [K of 0.023 W/m deg K (AGED)] and dimensional stability over the temperature range of minus 600 C to 1000 C. It is already known to you that PUF Panel system has been satisfactorily type tested for the under mentioned fire properties: - Self-extinguishing as per IS:11239 Conforms to class -I surface spread of flame as per BS: 476 part 7 Conforms to classified as “Not Easily Ignitable” as per BS 476 part 5. To facilitate easy and systematic assembly/disassembly, the panel to panel jointing system shall be CAMLOCK. The constructional details shall be as under: Wall & Ceiling Panels:PUFF insulation core thickness: 50 MM Density: 40 + 2 Kg/M 3 Surface spread of flam : Class I to BS:476 Pt.7 Ignitability : To BS: 476 Part.5 “not easily ignitable” Flammability : To IS:11239 “self-extinguishing” Environmental acceptance : Environment friendly “CFC Free”Outer Skin [Body Sheet] : 0.4MMPPGI Inner Skin [Body Sheet] : 0.4MMPPGI Supply of PUF insulated sandwich Top / side / wall panel with outer & inner side 0.4 mm pre-painted GI sheet. Overall thickness of 50 mm. PUF having density of 40 Kg/cu.m (+2) along with flashing / Roof flashing /corner flashing /rivets & silicon etc. APPD

Hermetically sealed single leaf hinged Door of size: 1500 x 2100 mm with 80 mm thick, blade along with front frame. Puff material with density of 45 kg/cu mtr with 0.6 mm PPGL finish for positive temperature up to +10c with wall frame, rising hinges, Door opener & closure, EPDM gasket & other related accessories (Make-Metaflex / Salco ) APPD

S/I/T/C of Mango processing Line Consists: Feeding elevator, Hot water treatment unit, washing cleaning unit, Drying unit, sorting inspection unit, U Belt & Electronic sorter with 1-line weight sorting system 5+1 Exits. Conveyor Type Feeding Elevator: It can feed fruit /vegetables into the Hot water treatment unit. Parameter: Drive power: 0.75kw, Mesh belt width: 800mm, food grade PVC. Frame thickness 3mm stainless steel 304 grade.Dimension: 2500 x 1200 x 1100 mm Capacity: 2000 Kg/Hr. M.O.C: Stainless Steel 304 Motor gear Make: Bonfiglioli-Italy Motor Make: Siemens /ABBOnline Hot water immersion treatment unit: Parameter: M.O.C. S.S. 304 Size: L X W: 4500 X 900 mm Roller conveyor: Powered by .5 H.P. Geared Motor. Flap Conveyor: Powered by .5 H.P. Geared Motor. Recirculating Pump: 2.0 H.P. Monoblock Heaters: 10 KW 2 nos. VFD: A.C. retention time 3 minutes. Function:To treat the mango for 3 minutes at 530C to control the Anthracnose disease, which is generally not controlled by any available approved fungicide. Motor gear Make: Bonfiglioli-Italy Motor Make: Siemens /ABB.Conveyor type Brushing / Washing Cleaning Unit /Waxing Unit: The whole machine is, made of 304 grade stainless steel. Large air turbine, high pressure water pump, fan nozzle, good cleaning effect. Complete electrical control system, easy to operate. Circulation filtration system, water can be recycled. The mesh belt is punched chain plate mesh belt with long service life. Simple installation, easy operation & low maintenance, low energy consumption, small foot print. labour & water saving, no damage of fruits /vegetables. Machine can continuously wash automatic, equipped with stepless variable speed motor, processing speed adjustable. The waxing unit is a machine consisting of 10 cylindrical brushes from soft natural horse hair. Above the brushes there are the sprayers that apply the wax on the fruits. Last after the waxing machine is the final hot air dryer, in order to dry the wax.Parameter:Drive power: 1.5 kw, Fan power: 4 kw Water pump power: 2.2 kw, Lift power: 0.75 kw. Capacity: 2300-2500 Kg/Hr. Brushing section with 15 cylindrical brushes of 900 mm each. Fruit cleaning brushes, maximum operating temperature of water +600C. Supasoft Light Blue, Size: 900 mm Length x 125 mm Diameter, designed for application requiring more rotation during brushing. Make-IBC (U.S.A) /Industrial Brushware (Australia). Mesh belt width: 800mm Dimension: 4000 x 1200 x 2100mm Gear Make: Bonfiglioli-Italy, Motor Make: Siemens /ABB Conveyor type Air Drying Unit: High speed good air-drying effect. Turning over the transition mesh belt, the fruit surface will be fully air dried, after washing cleaning. Parameter: Drive power: 1.5kw Fan Power: 0.75 Kw x 10 No Mesh belt width: 800 mm Whole machine is made of SS 304 grade. Capacity: 2000-2200 Kg/Hr. Dimension: 5000 x 1000 x 1350 mm Gear Make: Bonfiglioli-Italy, Motor Make: Siemens /ABB. Conveyor-Type Sorting Inspection Unit: Artificial Sorting /Inspection line is mainly used in the process of fruit / vegetable transmission manual picking bad, good fruit / vegetable transport to the next device. Parameter: Drive power: 1.5kw PVC belt width: 600mm, food grade PVC. Whole machine is made of SS 304 grade. Capacity: 2000-2200 Kg/Hr. Dimension: 3000 x 1000 x 1100 mm Gear Make: Bonfiglioli-Italy, Motor Make: Siemens /ABB.Electronic Sorter with 1 Line, Weight Sorting System: 5+1 Exits: No: 1 frame formed from sheet metal and hollow sections with double coating antirust paint. Specially designed PVC cups for large products, such as mango, pomegranates, etc. with dimensions of cup: 220mm length x 130mm width.No.1 system receiving the weight of the fruits. No.1 central controller.No.1 Feeder. No.1display unit with touch screen for the operation & control of the machine, ability for internet connection for technical support.No.5 outputs for the sorted product. No.1 output for small-large products. No.6 fruit trays lined with a special soft material to avoid the bruising of the fruits. No.1 system for the placement of empty boxes above the fruit trays.No.1 packaging bench in front of the fruit trays.No.1 motor driven by INVERTER with power 2 HP - Dimensions: 10000 mm Length / 1350mm Width Gear Make: Bonfiglioli-Italy, Motor Make: Siemens /ABB Packing Conveyor: The last conveyor after complete drying of fruit /vegetables into air drying unit, then ready for collection in packing conveyor.Drive power: 0.37kw Mesh belt width: 800mm, food grade PVC. M.O.C: Stainless Steel 304 grade.Frame thickness 2mm stainless steel 304 grade Dimension: 2000 x 1200 x 1100 mm Capacity: 2000 Kg/Hr. APPD

De-sapping Tables for Mango: Material of construction: Top Rollers & Bottom tray is made of 304 grade stainless steel and support frame is made of galvanized iron duly powder coated rust proof paint. Gap of 1” between the two rollers. Will be provided with heavy duty rugged swivel castor wheels with adequate locking system for easy in movement from one place to another. APPD

Hydraulic Hand Pallet Truck (Make-Supreme / Nilkamal): Hydraulic System: The manually operated lift pump is simple & reliable in operation. The hard chrome polished piston is resistant to rust, scratches and strokes. The pump is double sealed which secures efficiently against leakages and prolongs the life of the packing. The lift cylinders are welded directly on to the pump, and the oil reservoir is welded around the lift cylinder. This imparts efficient tightness and eliminates tube and hose connections the hand pallet truck is equipped with a neutral position valve as standard. When the drawbar is moved slowly, the neutral position ensures that the load is not lifted (Driving position). When the drawbar is moved a little faster, the load is lifted the usual way (lifting function). The system is simple, needs no adjustment and is reliable in operation. 6 no nylon wheels, powder coated finish. Capacity: 500 Kg Handle swivel: Standard. Wheels: two nos. nylon wheels with sealed bearing at front & 4 roller tandem wheels at back side. Lifting 12 mm/stroke. Lubrication grease nipple: For all movable part for easy Maintenance. APPD

Hand Operated Automatic Scrubber Drier Floor Cleaning Machine. Machine are handy operated scrubber-drier for quick, economical & effective cleaning of all type of hard floors. The extremely compact & robustly constructed machines guarantee a high degree of maneuverability, easy handling & good visibility. The height adjustable operating handle & the adjustable brush drive are ideal for fatigue-free operation. No of brushes:1, Brush diameter: 43 cm, Effective suction width: 75 cm, power brush motor: 800-watt, power suction motor: 1000 watt, working speed: 4 Km/hr, brush speed: 280 Rpm minimum, Clean & Dirty water tank: 22 Ltr. Dimension of the machine: (L) 100 cm x (W) 45 cm x (H) 87 cm. brushes can be changed quickly without the need for any tools at the push of a button (Make-Roots). APPD

Plant Quarantine Unit Misc & Minor Laboratory Equipment for Plant Quarantine Required with each Plant Quarantine Unit of Pack House Equipment: Illuminated magnifier (Magnoscope) 20X, Qty-02 no Stereo binocular microscope with cold light source with camera, Qty-01 no Inspection Table clear top, SS(Size: 2.5’X6’), Qty-02 no Desktop Computer, Qty-01 no Printer (24 Pin dot matrix), Qty-01 no UPS for computer with 15-20 min power backup, Qty-01 no A. INSPECTIONKIT 1. Kit bag, Qty-01 no 2. Knife(pointed), Qty-02 no 3. Magnifier glass- 20 X with provision of light, Qty-02 no 4. Camel brush-(small/medium), Qty-02 no 5. Scissor, Qty-02 no 6. Torch with cell, Qty-02 no 7. Forceps, Qty-02 no 8. Marker pen- (Red & Black), Qty-02 no 9. Pencil & Sharpener, Qty-02 no 10. Stapler With pin, Qty-01 no 11. Cello tape-, Qty-01 no 12. Rexene sheet/ White-Black papers heet, Qty-02 no 13. Marking slip-, Qty-02 no 14. Specimen vials -, Qty-20 no 15. Poly bags-, Qty-20 no 16. Needle-, Qty-01 no 17. Calculator-, Qty-01 no 18. Hand Gloves-, Qty-02 no 19. White enamelled Tray(solid type), Qty-04 no 20. Apron-, Qty-15 no Tissue paper, Qty-10 rolls. APPD

HOT WATER IMMERSION TREATMENT UNIT AS PER N.P.P.Q NORMS CAPACITY: 500 KG PER BATCH Automatic Type: • Working Treatment Temperature Range: Up To: 46.5-48.50C. Treatment: Batch Type. Internal Dimension’s in mm: 3000 x 1230 x 830 (L x W x H/D). Temperature Uniformity in Bath:+ 0.2-0.30C. Programmable Temperature Controller: LED display, Fully Microprocessor Control PID, Microprocessor Control to Optimize Parameters during Operation. (Make-Delta / Yokogawa) Digital Display of Set & Process Value in PID Temperature Controller. Paper Less Recorder for Temperature, Time & Date during the Operation’s. (Make-Chino / Yokogawa / Eurotherm) Automatic Recording Type Recording Time: Continuous during the start & end of treatment. Frequency of Recording: 2 Min Interval. Recording Type: Numerical Print / Pen Line Responding Each Channel by Colour. Accuracy: 0.10c Measuring Range: Ambient to 600c Display Resolution: 0.10C. Controller Accuracy:+0.10C. Control Panel Having Membrane Key Pad with Soft Touch Switches. Accuracy of temperature recorder: + 0.1%. Temperature recorder display VGA TFT: 5.7” touch screen. Input Signal for temperature recorder: K,S,E,J,T,B,N,R WRe 526. Fruit Sensor Flexible Pencil Type RTD: 8 No, In SS 316 Grade.Sensor Dimension: Outer Sheath Dimension: 5.4mm Sensor Rod: 2.54 Cm Located 8 Channel Relay Alarm Output. RS232 Print Port. Online suitable software for temperature, date & time.Record cycle:Flexible 1/2/3/5/1015/20/30/60 min. Device for Alarm: Audible, after process end cycle.Capacity of the treatment tank: can hold up to 500 Kg Mango per batch in stainless steel cages.Total Number of fruit cages required: 08 no. Fruit cage Is Made of Stainless-Steel-304 grade material.Lifting arrangement mechanically for holding the stainless-steel cages, lifting in & out (Up & Down) during treatment, fitted complete along with gear, motor & mild steel wire rope for Hot water treatment unit. Gear Make: “BONFIGLIOLI”, Motor Make: “SIEMENS /ABB” of suitable capacity. Permanent temperature sensor’s: 100Ω PT RTD-03, Made in SS316 Grade. Water Circulation pump: 4.0 Hp X 2 No-2900 Rpm, Powerful Single-Stage Circulation Pump, M.O.C in Stainless-Steel-304 (Make-Lowara-Italy) Grade. Operating temperature not less than 600C. Inner chamber treatment tank: Dull Finished 100%, 304 Grade Stainless-Steel in 16 SWG, Corrosion Resistant Inner Bath. Outer Chamber: Dull Finished 100%, 304 Grade Stainless-Steel in 18 SWG, Corrosion Resistant Inner Bath. Gap: Between the Walls Is Filled with Special Grade Puff Insulation to Avoid temperature loss. Heating Is Done through Immersion-Type Heating Elements & Is Fitted & Supported by Silicon Gasket’s, For Long Lasting Operation without Any Leakage, Heating Load: 10K.Wx5=50.0 KW. All Joints Are Duly Argon Arc Welded, Glossy & Smooth Finished. Back Drain Facility Is Available, With the Help of on /Off Valve. Machine should be fitted on heavy duty swivel castor wheel’s for easy mobility from one place to another place.Total Equipment load: 60 K.W. APPD

COLD ROOM:Design Parameters: Internal dimension:7.5 x 4.5 x 3.6 (L W H) Mtr Desired temperature range: +10 to 140C.Product stored: Misc. fruits & vegetables.Storage capacity /Per day loading: 20 Tons.Product incoming temperature: +350C.Wall & Ceiling insulation thickness: 80mm, PPGI/Inner-Outer. Floor insulation & thickness: 80 mm Puff Slab.Door type & Size: Swing type, 1500 x 2100 mm.No of doors: 01, Supply of Hinge Door, 80mm PU Insulation, (Density 45kg/m3) with 0.6mm PPGL Finish, For Positive temperatures up to (+1) degree, with Wall Frame, Rising Hinges, Door Opener & Closure, EPDM Gaskets and other Accessories.), Clear Opening. (Make-Metaflex / Salco / MTH) Ambient temperature: +350C.Refrigeration unit: (Make-Patton / Luve) No of Indoor Unit: 03 in each chamber.Pull down time: 24 Hrs.Evaporator unit dimension’s: 3350 x 421 x 610 mm. Evaporator unit capacity: 18.0 KW Casing: AlMg, Powder Coated RAL 9003 Air throw: 16.1 mtr approx. Fan: 04 No of 450 mm dia.Interconnecting copper pipe: Refrigerant: R-22Condensing unit dimension’s: 1016 x 440 x 800 mm. (Make-Emerson / Bitzer)Type compressor: Hermetic reciprocating type.No of Condensing unit: 03 in each chamber. Condensing unit cooling capacity: 17.0 KW @ 12.8 Evaporating temperature. Condenser coil grooved type. Condenser fax axial type.Condenser body & metal parts duly rust proof powder coated paint.Gas drier filter.Pressure switch.Suction & liquid line valve. PPGI/Puf insulated panels for walls & ceiling: Puff Insulation: The insulation material shall be CFC free PUF with CLOSED CELL CONTENT of 90% to 95% minimum. This foam is injected using high-pressure equipment in a precise ratio and proportion and auto cohesively laminated. The density of foam shall be 40 ± 2 kg/m 3, with thermal conductivity [K of 0.023 W/m deg K (AGED)] and dimensional stability over the temperature range of minus 600 C to 1000 C. It is already known to you that PUF Panel system has been satisfactorily type tested for the under mentioned fire properties: - Self-extinguishing as per IS:11239 Conforms to class -I surface spread of flame as per BS: 476 part 7 Conforms to classified as “Not Easily Ignitable” as per BS 476 part 5. To facilitate easy and systematic assembly/disassembly, the panel to panel jointing system shall be CAMLOCK. The constructional details shall be as under: Wall & Ceiling Panels: PUF insulation core thickness: 80 mm (Make-Lloyd / Dignus) Density: 40 + 2 Kg/M 3 Surface spread of flam: Class I to BS:476 Pt.7 Ignitability: To BS: 476 Part.5 “not easily ignitable” Flammability: To IS:11239 “self-extinguishing” Environmental acceptance: Environment friendly “CFC Free” Outer Skin [Body Sheet] : 0.5 MMPPGI Inner Skin [Body Sheet] : 0.5 MMPPGI Supply of PUF insulated sandwich Top / side / wall panel with outer & inner side 0.5 mm pre-painted GI sheet. Overall thickness of 80 mm. PUF having density of 40 Kg/cu.m (+2) along with flashing / Roof flashing /corner flashing /rivets & silicon etc.Temperature & Refrigeration unit of each room will be controlled through PLC control panel having following features:PLC system will be capable of interfacing RTD directly into its modules. No converter should be used to improve the accuracy of system. Scada graphics should be licence free for operation & should be downloadable on the PLC CPU itself. No special dongle / soft license will be required. Scada visualization pages can be displayed in any standard browser. There will be no need to install additional plug-ins, so projects will be created based on HTML5. The pages can be displayed on all of our web panels with integrated runtime environment. There will be no cost implications for creating any number of pages-unlike general scada systems where cost is incurred for each display device with runtime environment.(Make-Phoenix / Omron / Mitsubishi) APPD

PRE-COOLER:Design Parameters:Internal room dimension’s: 6.5 x 4.5 x 3.6 (L x W x H) Mtr Desired temperature range: +10 to 140C.Product stored: Misc. fruits & vegetables.Storage capacity /Per day loading: 15Tons. Product incoming temperature: +350C. Wall & Ceiling insulation thickness: 80mm, PPGI/Inner-Outer.Floor insulation & thickness: 80mm, Puff Slab. Door type & Size: Swing type, 1500 x 2100 mm. No of doors: 01, Supply of Hinge Door, 80mm PU Insulation, (Density 45kg/m3) with 0.6mm PPGL Finish, For Positive temperatures up to (+1) degree, with Wall Frame, Rising Hinges, Door Opener & Closure, EPDM Gaskets and other Accessories.), Clear Opening.(Make-Metaflex / Salco / MTH) Ambient temperature: +350C.Refrigeration unit: (Make-Patton / Luve) No of Indoor unit: 03 in each chamber.Pull down time: 10-12 Hrs. Evaporator unit dimension’s: 3350 x 421 x 610 mm.Evaporator unit capacity: 18.7 KW Air throw: 16.1 mtr approx. Casing: AlMg, Powder Coated RAL 9003 Fan: 04 No of 450 mm dia.Interconnecting copper pipe: Refrigerant: R-22 Condensing unit dimension’s: 1030 X 432 X 1160 mm.Type compressor: Hermetic reciprocating type. No of Condensing unit: 03 in each chamber. (Make-Emerson / Bitzer) Condensing unit cooling capacity: 17.0 KW @ 12.8 Evaporating temperature.Condenser coil grooved type.Condenser fax axial type. Condenser body & metal parts duly rust proof powder coated paint. Gas drier filter. Pressure switch. Suction & liquid line valve. PPGI/Puf insulated panels for walls & ceiling:Puff Insulation: The insulation material shall be CFC free PUF with CLOSED CELL CONTENT of 90% to 95% minimum. This foam is injected using high-pressure equipment in a precise ratio and proportion and auto cohesively laminated. The density of foam shall be 40 ± 2 kg/m 3, with thermal conductivity [K of 0.023 W/m deg K (AGED)] and dimensional stability over the temperature range of minus 60 DEG C to 100DEG C. It is already known to you that PUF Panel system has been satisfactorily type tested for the under mentioned fire properties: - Self-extinguishing as per IS:11239 Conforms to class -I surface spread of flame as per BS: 476 part 7 Conforms to classified as “Not Easily Ignitable” as per BS 476 part 5. To facilitate easy and systematic assembly/disassembly, the panel to panel jointing system shall be CAMLOCK. The constructional details shall be as under: Wall & Ceiling Panels:PUF insulation core thickness: 80 mm (Make-Dignus / LLoyd) Density: 40 + 2 Kg/M 3 Surface spread of flam: Class I to BS:476 Pt.7 Ignitability: To BS: 476 Part.5 “not easily ignitable” Flammability: To IS:11239 “self-extinguishing” Environmental acceptance: Environment friendly “CFC Free” Outer Skin [Body Sheet] : 0.5 MMPPGI Inner Skin [Body Sheet] : 0.5 MMPPGISupply of PUF insulated sandwich Top / side / wall panel with outer & inner side 0.5 mm pre-painted GI sheet. Overall thickness of 80 mm. PUF having density of 40 Kg/cu.m (+2) along with flashing / Roof flashing /corner flashing /rivets & silicon etc.Temperature & Refrigeration unit of each room will be controlled through PLC Control panel having following features:PLC system will be capable of interfacing RTD directly into its modules. No converter should be used to improve the accuracy of system. Scada graphics should be licence free for operation & should be downloadable on the PLC CPU itself. No special dongle / soft license will be required. Scada visualization pages can be displayed in any standard browser. There will be no need to install additional plug-ins, so projects will be created based on HTML5. The pages can be displayed on all of our web panels with integrated runtime environment. There will be no cost implications for creating any number of pages-unlike general scada systems where cost is incurred for each display device with runtime environment. (Make-Phoenix / Omron / Mitsubishi) APPD

RIPENING CHAMBER:Design Parameters:Internal room dimension’s: 6.1 x 3.3 x 3.6 (L x W x H) Mtr No of chambers: 0Desired temperature range: +15 to 240C. Relative humidity inside chamber: 60 to 90% Rh. Humidifier inside the chamber: Ultrasonic type, moisture proof. Product to be ripening: Banana / Mango /Papaya Etc.Type of ripening system: Automatic. Maintain of CO2 level: CO2 fan & Controller.Individual Dampers for air intake & outtake for CO2 level maintain. Individual Display & Control of Humidity, CO2, ethylene & temperature, Through PLC & Human Machine Interface. Ethylene gas sensor transmitter range: 20-2000 P.P.M Temperature & humidity sensor transmitter: 0-100% RH, Temp: +10 to +600C.Carbon dioxide CO2 sensor transmitter: 0-20000 P.P.M Ethylene maintain in ripening chamber: 50-150 P.P.M Stacking details of product: Plastic crate.Ripening capacity /Per day: 10 Tons.Product incoming temperature: +350C. Wall & Ceiling insulation thickness: 80 mm thick PPGI/Inner-Outer.Floor insulation & thickness: 80 mm Puff Slab.Door type & Size: Swing type, 1500 x 2100 mm. No of doors: 01, Supply of Hinge Door, 80mm PU Insulation, (Density 45kg/m3) with 0.6mm PPGL Finish, For Positive temperatures up to (+1) degree, with Wall Frame, Rising Hinges, Door Opener & Closure, EPDM Gaskets and other Accessories.), Clear Opening.(Make-Metaflex / Salco / MTH) Ambient temperature: +350C.Refrigeration unit: (Make-Patton / Luve)No of indoor unit: 02 in each chamber. Evaporator unit dimension’s: 3350 x 421 x 610 mm. Evaporator unit capacity: 18.0 KW Air throw: 16.1 mtr approx.Casing: AlMg, Powder Coated RAL 9003 Fan: 04 No of 450 mm dia. Refrigerant: R22Condensing unit dimension’s: 1016 x 440 x 800 mm.Type compressor: Hermetic reciprocating type. No of Condensing unit: 02 in each chamber.Condensing unit cooling capacity: 17.0 KW @ 12.8 Evaporating temperature.Condenser coil grooved type. Condenser fax axial type.Condenser body & metal parts duly rust proof powder coated paint. Gas drier filter. Pressure switch.Suction & liquid line valve.PPGI/Puff insulated panels for walls & ceiling:Puff Insulation: The insulation material shall be CFC free PUF with CLOSED CELL CONTENT of 90% to 95% minimum. This foam is injected using high-pressure equipment in a precise ratio and proportion and auto cohesively laminated. The density of foam shall be 40 ± 2 kg/m 3, with thermal conductivity [K of 0.023 W/m deg K (AGED)] and dimensional stability over the temperature range of minus 600 C to 1000 C. It is already known to you that PUF Panel system has been satisfactorily type tested for the under mentioned fire properties: - Self-extinguishing as per IS:11239 Conforms to class -I surface spread of flame as per BS: 476 part 7 Conforms to classified as “Not Easily Ignitable” as per BS 476 part 5. To facilitate easy and systematic assembly/disassembly, the panel to panel jointing system shall be CAMLOCK. The constructional details shall be as under: Wall & Ceiling Panels:PUF insulation core thickness: 80 mm (Make-Dignus / LLoyd) Density: 40 + 2 Kg/M 3 Surface spread of flam: Class I to BS:476 Pt.7 Ignitability: To BS: 476 Part.5 “not easily ignitable” Flammability: To IS:11239 “self-extinguishing” Environmental acceptance: Environment friendly “CFC Free” Outer Skin [Body Sheet] : 0.5 MMPPGI Inner Skin [Body Sheet] : 0.5 MMPPGI Supply of PUF insulated sandwich Top / side / wall panel with outer & inner side 0.5 mm pre-painted GI sheet. Overall thickness of 80 mm. PUF having density of 40 Kg/cu.m (+2) along with flashing / Roof flashing /corner flashing /rivets & silicon etc.Temperature & Refrigeration unit of each room will be controlled through PLC Control panel having following features:PLC system will be capable of interfacing RTD directly into its modules. No converter should be used to improve the accuracy of system. Scada graphics should be licence free for operation & should be downloadable on the PLC CPU itself. No special dongle / soft license will be required. Scada visualization pages can be displayed in any standard browser. There will be no need to install additional plug-ins, so projects will be created based on HTML5. The pages can be displayed on all of our web panels with integrated runtime environment. There will be no cost implications for creating any number of pages-unlike general scada systems where cost is incurred for each display device with runtime environment. (Make-Phoenix / Omron / Mitsubishi) APPD

VEGETABLE PROCESSING LINE Complete Stainless-Steel 304 grade Capacity: 1800-2000 Kg / hour for leafy & roots Vegetable Line Consists: Feeding elevator-Bubble type washing cleaning unit-Soak conveyor-Brush washing & peeling machine-Operating Table-Sorting Conveyor-Multifunctional vegetable cutting machine-Lifting Conveyor-Swirl cleaning machine & Dewatering machine, Etc.Conveyor type Feeding Elevator (Qty-01 no): It can feed vegetables into the bubble washing machine. Parameter: Drive power: 0.37kw Dimension: 2000 x 1200 x 1100 mm Capacity: 2000 Kg/Hr. M.O.C: Stainless Steel 304 Motor gear Make: Bonfiglioli-Italy Motor make: Siemens /ABB The frame is made of stainless steel 304 & the belt is made of food grade PVC, belt width: 800mm. Frame thickness 2mm, stainless steel 304 grade. Bubble type Washing Cleaning Unit (Qty-01 no): The whole machine is, made of 304 grade stainless steel. Large air turbine, high pressure water pump, fan nozzle, good cleaning effect. Complete electrical control system, easy to operate. Circulation filtration system, water can be recycled. The mesh belt is punched chain plate mesh belt with long service life. Simple installation, easy operation & low maintenance, low energy consumption, small foot print labor & water saving, no damage of fruits & vegetables. Machine can continuously wash automatic, equipped with stepless variable speed motor, processing speed adjustable. Parameter: Drive power: 0.75kw Fan power: 3.0kw Water pump power: 2.2kw Lift power: 0.55kw Capacity: 2000-2500 Kg/Hr. Mesh belt width: 800mm Dimension: 4000 x 1200 x 2100mm Motor gear Make: Bonfiglioli-Italy Motor make: Siemens /ABB Soak Conveyor (Qty-01 no): it can soak & feeding the vegetables into brush washing & peeling machine. Parameters: Dimension: 2500 x 800 x 1750 mm Mesh belt width: 600 mm Drive power: 0.75kw Fan power: 0.37kw Mesh belt is made of stainless steel 304 grade Motor make: Siemens /ABB Motor gear Make: Bonfiglioli-Italy Brush washing & peeling machine (Qty-02 no): it can wash & peel vegetable in continuous mode. Parameters: Dimension: 2300 x 1000 x 1760 mm Brush roller length: 1800 mm Total no of roller brush: 09 Roller brush is made of high-quality nylon yarn. Drive power: 3kw Discharge power: 0.75kw Motor make: Siemens /ABB Motor gear Make: Bonfiglioli-Italy Temporary storage platform / Operating table (Qty-02 no): After washing vegetables, temporary storage platform, workers put vegetables into vegetable cutting machine. Parameters: Complete made of rust proof stainless steel 304 grade. Easy maintenance & cleaning. Dimension: 2000 x 1000 x 650 mm Sorting Inspection Unit (Qty-01 no): Introduction Artificial Sorting /Inspection line is mainly used in the process of vegetable transmission manual picking bad, good vegetable transport to the next device. Parameters: Drive power: 0.75kw PVC belt width: 600mm, food grade PVC. Frame is made of SS 304 grade. Capacity: 2000 Kg/Hr. Dimension: 5000 x 1000 x 1100 mm Motor gear Make: Bonfiglioli-Italy Motor Make: Siemens /ABB. Multifunctional vegetable cutting machine (Qty-03 no): Introduction: This vegetable cutting machine can cut radish, potatoes, sweet potatoes, onions, eggplant, apples, ginger etc. It can cut potato chips, chips, radish and so on into cubes, slices and strips. Parameters: Dimension: 1160 x 530 x 1000 mm Power: 1.75kw / 220 volt / 50 Hz Capacity: 300-1000 kg/hour Weight: 200kg Cutting range: Slices: 2-20mm, strips: 2-10mm, Cubes: 8, 10, 12, 15 & 20mm Segment: 1-60mm Machine can be equipped with three Knife plates & all contact parts is made of stainless steel. Vegetable lifting conveyor (Qty-01 no): it can feed the vegetable into the blanching machine. Parameter: Drive power: 0.37kw Dimension: 2000 x 600 x 1500 mm Capacity: 2000 Kg/Hr. M.O.C: Stainless Steel 304 Motor gear Make: Bonfiglioli-Italy Motor make: Siemens /ABB The frame is made of stainless steel 304 grade (50 x 50 rectangular square pipe x 2mm thickness) & the belt is made of food grade PVC, mesh belt width: 600mm. Swirl cleaning machine (Qty-01): The whole head type pilot duplex design, frameless, three-dimensional seamless high strength stainless-steel plate bending technology. Washing cyclone massage, 360 degrees turn eight loop thoroughly clean. The vortex buffer out food, no chain, belt transmission, ensure effective cleaning time is longer, cleaning space is larger, at the same time without health corner. The high frequency vibration conveyor, use the high frequency miniature vibration frequency flexible spring, Sweden import motor. Punching and corrugated shape bending sieve body, classification of transmission, remove vegetable attachments, fine filtering hair, mi, vegetables, purify the water. Two precipitation filtering water cycle system, high efficiency and energy saving, avoid excessive waste of water resources. High block designed from the ground, convenient maintenance, no dead Angle to hide the dirt. Use give expulsion-type independent drainage system, no complex pipe laying, avoid to produce sludge stuck pipe. Used for cleaning materials to work in miscellaneous waterlogging caused by excessive rainfall, more thoroughly remove the sediment, dust in the material, pebbles and other lightweight or less heavy clutter. Swirl cleaner and vibration drop into the spiral chute is made of stainless-steel plate rolling. Tank inlet solutions and sides with spray washing pipe, the high-pressure water pump of water supply, through the jet wash pipe under the action of spray water is the water in the tub cyclotron state material through the water spin forward, complete cleaning. The material transportation vibration waterlogging caused by excessive rainfall, water flow through the orifice flow into the bottom of the vibrating screen a complete cycle of the water tank.Dimension: 4200 x 1300 x 1560 mm Power: 5.5kw Mesh form: piercing of stainless plate. Equipment Features of Vegetable Processing Equipment: The spiral mixing water washing vegetable material, extend the cleaning path, to save water. Materials with flow discharge, reduce the mechanical damage. The water flow through the pump, manual control valve, applies to the proportion of different material to clean. At the bottom of the tub with sediment precipitation tank, separation flow in the mud, impurities, convenient for centralized storage, emissions. Automatic water level control alarm system, real-time monitoring of the tub water level, provides the omni-directional safeguard. Adjustable direction fault current cleaning spray device and satisfies the requirement of many varieties of vegetables processing. Dedicated to the floating material cleaning, through mutual crisscross hedge water cleaning, materials become curve movement, extend the cleaning path, to save water. Adjust the supporting feet worthy of cut equipment level. Rotor cage to miscellaneous device, used for automatic exhaust noise deinsectization, rotating the separation flow cylinder surface worm miscellaneous, the discharge port. Dewatering machine (Qty-04 no): This is a High Quality Automatic Commercial Dehydrator, Industrial Food Dehydrator for Fruit & Vegetable, the dehydrator time and rotation rate can be set by PLC control panel. There are three baskets come with the Vegetable Dewatering Machine, it is easily operation and high efficiency. Power: 1.5kw, Dimension: 850 x 950 x 1480 mm. Electronic PLC control panel (Qty-01 no): to synchronize each other machines in conveyor line.Semi-Automatic Box Strapping Machine:Semi-automatic box strapping machine takes polythene plastic strap as binding material. The machine can automatically conduct strap collection, thermal sealing, cutting & with stopping operation. Strapping speed: 1.6 sec / strap, strapping width: 9-15 mm & operating voltage: 220 V, 50 Hz Machine size: 895 x 565 x 740 mm, Strapping tension: 5-60 Kg, Machine weight approx.: 100 Kg. SS Packing Tables with light arrangement: Size: 1.8 (L) x 0.76 (W) x 0.90 (H) mtr, M.O.C: stainless steel 304 grade, thickness: 1.5 mm, no of legs: 06, made of 30 x 30 x 1.6 mm square tube with rubber packing. APPD

Plastic Crate-20 Kg-48 Ltr Size: 540 (L) 357 (W) 290 (H) (mm). Weight=1.520 Kg (-/+ 2%) (Make- Supreme / Nilkamal) APPD

Plastic Crate-20 Kg-48 Ltr Size: 500 (L) 325 (W) 200 (H) (mm). Weight=1.150 Kg (-/+ 2%) (Make-Supreme / Nilkamal) APPD

Plastic Pallets-PDSS 1200 (L) 1000 (W) 160 (H) (mm). Weight 16.50 Kg (+/- 2%) (Make-Supreme / Nilkamal) APPD

AIR CURTAIN Super Slim Centrifugal type forward bending dynamically balanced blowers, highly efficient, less noisy with large air volume high velocity 20m/sec approx. at source with long air shooting range. All metallic stylish & slim casting, light weight body construction. Suitable for 5 feet door opening along with Auto switch. APPD

INSECT KILLER A high efficiency portable INSECTOCUTOR designed to prevent and destroy flying insects and prevent them from entering into food processing or any other area where you require insect free atmosphere. Insectocutor works on the principle of hypnotism and draws the insects towards the U.V. tubes of the unit and the insects die instantaneously on contact with the electrically charged grid. The dead insects are collected in the catchment tray provided at the bottom for easy disposal. The unit is easy to install with low maintenance cost and nil consumables required for operation and are available in different models to suit your requirement. Size: 25″ L x 9.5″ B x 20″ H 2 Tubes 2 ft. each, 20/40 watts each. APPD

Strip Curtain Transparent type for all Door’s inside Pack House: Size: 200mm Width x 2mm thickness APPD

Automatic Hand Dryer Material: Plastic Operation type: Automatic Infrared Sensor Installation type: Wall Mounted, suitable for Wall,It Comes with High Speed Motor that will dry your hands much faster. Box Contains: 1 X Hand Dryer & manuals & Nut n Bolts. APPD

Soap Dispenser

Wash Basin Wall hung wash basin with full pedestal Size: 23 x 16 inch. Complete along with stainless steel tap, drain plug, etc. APPD

Insect Trap Yallow APPD

Plastic Dustbin with Lid Medium Size Fitted complete along with handle. APPD

Plastic Dustbin with Lid Large Size, Fitted complete along with handle & wheel. APPD

Plant Quarantine Laboratory Furniture Working table Size: 36 x 24”, Qty-03 Stainless Steel Chair for single person, Qty-04 APPD

Almirah for Changing Room His & her Size: 6 Ft. Shoe Rack Size: 36 x 20” APPD

Comprehensive Annual Maintenance Contract of Vapour Heat Treatment Plant capacity 2500Kg/Batch, R.O plant capacity 4000Ltr/Hr, Cold Storage 02 no. capacity 20MT each, Pre Cold Room 02 no. capacity 20MT each, Ripening Chamber 01 No. capacity 10MT, Fruit Processing Line capacity 1000Kg/Batch, Hot Water Dip Treatment Unit capacity 400Kg/Batch, Vegetable Processing Line 1000Kg/Batch and Electrical Panels. (4th Year) APPD

Comprehensive Annual Maintenance Contract of Vapour Heat Treatment Plant capacity 2500Kg/Batch, R.O plant capacity 4000Ltr/Hr, Cold Storage 02 no. capacity 20MT each, Pre Cold Room 02 no. capacity 20MT each, Ripening Chamber 01 No. capacity 10MT, Fruit Processing Line capacity 1000Kg/Batch, Hot Water Dip Treatment Unit capacity 400Kg/Batch, Vegetable Processing Line 1000Kg/Batch and Electrical Panels. (5th Year) APPD

Comprehensive Annual Maintenance Contract of Vapour Heat Treatment Plant capacity 2500Kg/Batch, R.O plant capacity 4000Ltr/Hr, Cold Storage 02 no. capacity 20MT each, Pre Cold Room 02 no. capacity 20MT each, Ripening Chamber 01 No. capacity 10MT, Fruit Processing Line capacity 1000Kg/Batch, Hot Water Dip Treatment Unit capacity 400Kg/Batch, Vegetable Processing Line 1000Kg/Batch and Electrical Panels. (6th Year) APPD

Comprehensive Annual Maintenance Contract of Vapour Heat Treatment Plant capacity 2500Kg/Batch, R.O plant capacity 4000Ltr/Hr, Cold Storage 02 no. capacity 20MT each, Pre Cold Room 02 no. capacity 20MT each, Ripening Chamber 01 No. capacity 10MT, Fruit Processing Line capacity 1000Kg/Batch, Hot Water Dip Treatment Unit capacity 400Kg/Batch, Vegetable Processing Line 1000Kg/Batch and Electrical Panels. (7th Year) APPD

Operation of Fruit and Vegetable Pack House for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. Computer Operator 01 no. (For 1st year) APPD

Operation of Fruit and Vegetable Pack House for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. Computer Operator 01 no. (For 2nd year) APPD

Operation of Fruit and Vegetable Pack House for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. Computer Operator 01 no. (For 3rd year) APPD

Operation of Fruit and Vegetable Pack House for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. Computer Operator 01 no. (For 4th year) APPD

Operation of Fruit and Vegetable Pack House for 01 year with atleast following staff/operator: Electrician(Operators) 03 no. Computer Operator 01 no. (For 5th year) APPD