State Agricultural Produce Markets Board Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
State Agricultural Produce Markets Board - RKUMP Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date4 Apr 2023
Closing Date11 Apr 2023
Tender Amount₹ 10,60,33,932
Costs
EMD
₹ 55,02,000Document Cost
₹ 29,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_RKUMP_793176_1Bid Award Id
ViewTender No
NIVIDA 107 DATE 01.04.2023Tender Authority
State Agricultural Produce Markets Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and piano type switch and socket etc., complete in all respect including matching colour wash.141(C)
123
40221
327
Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit,GP Box , 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. 144 (C)
250
223250
893
Same as in item 148, but 25mm dia 16 SWG (1.5 mm) thick rigid steel conduit.149
6400
998400
156
Same as in item 174(B) but for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable in PVC conduit.178 ©
135
28890
214
Add for light / fan points with modular type switch in place of piano type switch. 187 (A)
269
11836
44
Add for 2 way light point with modular switches in place of piano type switches. 187 (B)
102
16830
165
Add for plug point with modular switch & socket in place of piano type switch & socket.187 ©
196
16268
83
Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch 187 (D).
138
6486
47
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required..DSR 2022
1.24 Telephone socket outlet
200
25200
126
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.. DSR 2022
1.24 15/16 A switch
184
24472
133
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire DSR 2022
1.7.1
1855
517545
279
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
2 Pair DSR 2022
1.18.2
1900
61693
32.47
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022
1.19
1650
66280
40.17
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.1307(C)
6900
834900
121
Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. 221(C)
4130
615370
149
Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 25 mm dia heavy duty (2 mm thick) PVC conduit with one number 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.222(C)
2540
518160
204
Supply and wiring of 4 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in heavy duty (2 mm thick) PVC conduit with 2 nos 6 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduit. 278(C)
2360
1191800
505
Supply and wiring of 4 number 16 sq. mm. PVC insulated 1100 V grade single core Copper conductor cable in 40 mm dia PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 10 sq mm single core Copper conductor cable as earth continuity wiredrawn in coudit including matching colour wash etc, complete in all respect. 279(C)
5600
4048800
723
Supply and fixing of recess/Surface/Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA 1401
191
147070
770
Supply and fixing of recess/ Surface/ Pendent mounting round 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA 1402
439
592650
1350
Supply and fixing of batten / angle holder complete in all respect.405
1146
68760
60
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AAA 1413
485
577150
1190
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. CAT-AAA 1453
142
1256700
8850
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501 16 sq. mm 4 core
940
322420
343
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501 35 sq. mm 3.5 core
680
286960
422
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501 70 sq. mm 3.5 core
980
600740
613
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501 240 sq. mm 3-1/2 core
1440
1985760
1379
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 6 sq. mm 2 core
310
23560
76
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 10 sq. mm 4 core
440
38280
87
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 16 sq. mm 4 core
360
31320
87
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 35 sq. mm 3-1/2 core
480
85440
178
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 70 sq. mm 3-1/2 core
360
71640
199
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 240 sq. mm 3-1/2 core
330
156090
473
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 6 sq. mm
441
7938
18
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 10 sq. mm
441
8820
20
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 16 sq. mm
419
8799
21
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 35 sq. mm
367
11377
31
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 70 sq. mm
177
11859
67
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 120 sq. mm
185
21645
117
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 240 sq. mm
188
51136
272
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.703
515
2770700
5380
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 716
1100
99000
90
S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-A 1024 (A)
349
663100
1900
S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-A 1027 (A)
53
231610
4370
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve Cat-A 1009
150
111000
740
S&F of 6 Amp. to 32 Amp. 4 pole MCB (10 KA) C Curve Cat-A 1019
150
240000
1600
S&F of 40 Amp. 3 pole MCB (10 KA) C Curve Cat-A 1020
150
341250
2275
S&F of 6 Amp. to 32 Amp. 3 pole MCB (10 KA) C Curve Cat-A 1013
150
178500
1190
S&F of 40 Amp. 4 pole MCB (10 KA) C Curve Cat-A 1016
150
267000
1780
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A1002
951
247260
260
S & F surface/Flush mounting 4ways V TPN distribution board without additional Door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-A 1026 B
140
1050000
7500
S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release 1021
200
1260000
6300
Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. 1116
421
58940
140
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. 1120
118
23010
195
Supply and fixing of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. 1122 (A)
358
422440
1180
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality. 1136
72
183600
2550
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. 1139 (A)
160
100000
625
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 1149
400
60000
150
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. DSR
2022
1.57
310
192510
621
Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work 1203(C).
425
219725
517
Supplying and installing following size of perforated painted
with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. DSR
2022
4.1 300 mm width X 50 mm depth X 1.6 mm thickness
1500
996000
664
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.DSR
2022
14.4 300 mm dia
1740
1694760
974
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.DSR
2022
14.16 200 mm dia (OD-200 mm & ID-175 mm nominal)
1990
1136290
571
Supply and fixing of 1200 mm ceiling exhaust fan with fan motor of AC Permanent insulation capaciotr rating confirming BEE 5 star rating and IS 374-79 And also compite V,50HZ ,I-PH AC the fan assemble should ensists of down rod blades shackle canopies etc. and with double bearing system. 1501
361
649800
1800
Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect. 1414
105
187950
1790
Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect. 1417A
170
442000
2600
MAIN L.T PANEL Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. INCOMMER 813
8
1630808
203851
Supply and fixing of MS Channel 75x40 mm 2.24 long as per design for cross ann.(V Channel xarms ) approved
32
12000
375
Supply and fixing 11KV Insulator complete with spindles & hardware complete as required.approved
60
25500
425
Supply and fixing 11KV disc and fitting on cross arm -clamps complete with spindles & hardware complete as required.approved
72
67320
935
Supply and fixing 11KV lightning arrestor and connecting to all phases. Approved
2
19700
9850
Supply and fixing of steel tubular pole 11 .00 m long with 1/6 of over all length of pole in cement concrete with 1 sqft dia cement plinth alround the pole above the ground level. The foundation of underground will be of cement concrete in the raio of 1:2:3 the stone ballast -brick ballast used will be of size including all rewuired for proper completion of the work approved
24
552000
23000
Supply and fixing of 11 kv G.O Switch air break triple people complete with fixing angle 25mm dia. 6m long operation pipe lock and handle sactioned approved
1
16450
16450
Supply and fixing 11KVD.O FUSE of approved make of DIP complete in all respect.approved
1
8300
8300
Supply and fixng OF cubical box dust and vermin proof 2/3/4 was distribution box of 16 swg ms sheet of 1.5 mm thick with the suitable sizes of copper buster 3 no. 500 amp cut out unit as incoming inside locking arrangement handle danger plate etc. I/C two coat of approved quality paint and earthing by two no. 7/10 SWG wire which will be taken as loop from existing sub station earthing. The job including all material labour T&P suitable foundation for mounting the bars etc as complete.approved
1
31500
31500
Supply and making of terminal outdoor joint for 11kv xlpc of following size cable including light insulation tape and mat shinn cable kits as per required outdoor joint
2
22600
11300
Supply and fixng of HT-LT jumpering and connection of double pole and transformer approved
1
1100
1100
Supply and fixing of MS Channel 125x65 mm 2.24 long as per design for cross ann.(V Channel xarms )approved
4
2080
520
MAIN L.T PANEL Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. 800 Amp /415Volt ACB-1 No 822A
6
4531200
755200
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 641
55
907500
16500
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. 1421
70
345800
4940
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 701
12
48912
4076
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. 703
24
129120
5380
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. 704
12
122040
10170
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 716
900
81000
90
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. 718
480
532800
1110
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. DSR2022
5.18
1400
50400
36
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. DSR
2022
14.4 300 mm dia
80
77920
974
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR
2022
14.16 200 mm dia (OD-200 mm & ID-175 mm nominal)
200
114200
571
Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 506 120 sq. mm 3 core
400
592000
1480
supplying and making indoor cable end termination with heat
shrinkable jointing kit complete with all accessories including
lugs suitable for following size of 3 core, XLPE aluminium
conductor cable of 11 KV grade as required : DSR 2022
10.4 120 sq. mm
12
153516
12793
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required DSR 2022
10.5 120 sq. mm
12
206148
17179
Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. 621
80
6320
79
Supply & fixing of 230 mm x 32 mm x 1.5 mm galvanised steel strips including holes for shakcle insulators pins and bolts etc. complete in all respect. 622
50
5650
113
Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . 623
60
13380
223
Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect. 631
30
90870
3029
Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634
75
24300
324
Supplying fixing and commissioning of SILENT (Canopy design) water cooled DG Set with electronic governer with one Diesel Engine with rated capacity (mentioned below) at 0.8 P.F. 1500 RPM, 4 stroke multi-cylinder coupled to brush less type 415 volts 50 cycle/ second self exited alternator completed with cushy pads. Domestic silencer exhaust pipe complete with Alternator auxiliaries, Radiator, 24 volts chargeable battery including initial charging of batteries. suitable for synchronizing complete as per specification. MAKE KIRLSKAR,JACKSON,CUMMINS 200KVA approved
1
1200000
1200000
Supplying fixing and commissioning of SILENT (Canopy design) water cooled DG Set with electronic governer with one Diesel Engine with rated capacity (mentioned below) at 0.8 P.F. 1500 RPM, 4 stroke multi-cylinder coupled to brush less type 415 volts 50 cycle/ second self exited alternator completed with cushy pads. Domestic silencer exhaust pipe complete with Alternator auxiliaries, Radiator, 24 volts chargeable battery including initial charging of batteries. suitable for synchronizing complete as per specification. MAKE KIRLSKAR,JACKSON,CUMMINS 160KVA approved
2
1380000
690000
Supplying fixing and commissioning of SILENT (Canopy design) water cooled DG Set with electronic governer with one Diesel Engine with rated capacity (mentioned below) at 0.8 P.F. 1500 RPM, 4 stroke multi-cylinder coupled to brush less type 415 volts 50 cycle/ second self exited alternator completed with cushy pads. Domestic silencer exhaust pipe complete with Alternator auxiliaries, Radiator, 24 volts chargeable battery including initial charging of batteries. suitable for synchronizing complete as per specification. MAKE KIRLSKAR,JACKSON,CUMMINS 40KVA approved
1
432000
432000
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse.
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. INCOMMER 824D
4
3822400
955600
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 4 core 501
1720
510840
297
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core
200
68600
343
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core
320
196160
613
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 150 sq. mm 3-1/2 core
350
334950
957
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq. mm 3-1/2 core
300
413700
1379
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 300 sq. mm 3-1/2 core
850
1371050
1613
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 6 sq. mm 4 core
5
400
80
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 16 sq. mm 4 core
4
348
87
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 70 sq. mm 3-1/2 core
4
796
199
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 150 sq. mm 3-1/2 core
4
1220
305
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 240 sq. mm 3-1/2 core
2
946
473
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 503 300 sq. mm 3-1/2 core
6
3030
505
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 6 sq. mm
20
360
18
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 16 sq. mm
16
336
21
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 35 sq. mm
4
124
31
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 70 sq. mm
16
1072
67
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 120 sq. mm
2
234
117
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 150 sq. mm
18
2628
146
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 240 sq. mm
6
1632
272
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 504 300 sq. mm
18
7056
392
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 641
50
825000
16500
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA 1420
50
225000
4500
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 701
10
40760
4076
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. 703
16
86080
5380
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect. 704
6
61020
10170
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 716
750
67500
90
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. 718
340
377400
1110
Supplying and laying 6 SWG G.I. wire at 0.50 metre below
ground level for conductor earth electrode, including
connection/ termination with GI thimble etc. as required. DSR2022
5.7
3540
155760
44
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. DSR
2022
14.4 300 mm dia
100
97400
974
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR
2022
14.16 200 mm dia (OD-200 mm & ID-175 mm nominal)
800
456800
571
Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 506 120 sq. mm 3 core
800
1184000
1480
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : DSR 2022
10.4 120 sq. mm
6
76758
12793
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : DSR 2022
10.5 120 sq. mm
2
34358
17179
Supply and fixing of Retro Reflective sign board made of 2 mm thick aluminum sheet face to be fully covered with high intensity grade Retro Reflective sheet. (Approved Brand of M.O.S.T. color as per required and test matter sign & symbol shall be computerized cutting machine and fabricated out of high intense grade Retro Reflective sheeting. The board will be provided along with back frame of angle iron of size 40 x 40 x 4 mm all round and across with proper clamping arrangement painted with synthetic enamel paint to fix with tubular structure or on wall. The back of aluminum sheet shall be powder coated. APPROVED
65
662740
10196
Supplying, installation, testing and commissioning of
electric driven terrace pump suitable for automatic
operation and consisting of following, complete in all
respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing
pump of cast iron body & bronze impeller with stainless
steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type
suitable for operation on 415 volts, 3 phase, 50 Hz, AC
supply with IP55 class of protection for enclosure,
horiziontal foot mounted type with Class-'F' insulation,
conforming to IS-325. M.S.fabricated common base plate, coupling, coupling
guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered
and with anti vibration pads. 450 lpm at 35 m Head (DSR 4.2)
12
849498
70791.53
Providing, laying, testing & commissioning of 'C' class
heavy duty MS pipe conforming to IS 3589/IS 1239
including Welding, fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia (DSR 7.4)
620
404990
653.21
Providing, laying, testing & commissioning of 'C' class
heavy duty MS pipe conforming to IS 3589/IS 1239
including Welding, fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia (DSR 7.6)
620
577381
931.26
Providing, laying, testing & commissioning of 'C' class
heavy duty MS pipe conforming to IS 3589/IS 1239
including Welding, fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia (DSR 7.7)
620
771385
1244.17
Supplying and fixing single headed internal hydrant
valve with instantaneous Gunmetal/Stainless Steel
coupling of 63 mm dia with cast iron wheel ISI marked
conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (DSR 9.1)
13
80860
6220.02
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 50mm dia (DSR 11.2)
57
173675
3046.93
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80mm dia (DSR 11.4)
57
229075
4018.86
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia (DSR 11.5)
57
305338
5356.82
Supplying and fixing orifice plate made out of 6 mm
thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (DSR 13)
35
37503
1071.53
Providing, installation, testing and commissioning of
non-return valve of following sizes confirming to IS:
5312 complete with rubber gasket, GI bolts, nuts,
washers etc.as required : (DSR 14) 100mm dia
22
197865
8993.88
Providing, installation, testing and commissioning of
stainless steel Y-strainer fabricated out of 1.6 mm
thick stainless steel, Grade 304, sheet with 3 mm dia
holes with stainless steel flange. 100mm dia (DSR 15.2)
5
26767
5353.5
Supplying and fixing 63 mm dia, 15 m long RRL hose
pipe with 63 mm dia male and female couplings duly
bound with GI wire, rivets etc. conforming to IS 636
(type-A) as required : Gun Metal (DSR 16.1)
25
107651
4306.04
Supplying and fixing first-aid Hose Reel with MS
construction spray painted in post office red,
conforming to IS 884 complete with the following as
required. 30m (DSR 17.1)
10
69827
6982.79
Supplying & fixing 63 mm dia gun metal short branch
pipe with 20 mm nominal internal diameter size nozzle
conforming to IS 903 suitable for instantaneous
connection to interconnect hose pipe coupling as
required : Gun metal (DSR 18.1)
28
55822
1993.66
Supplying and fixing air vessel made of 250 mm dia, 8
mm thick MS sheet, 1200 mm in height with air release
valve on top and flanged connection to riser, drain
arrangement with 25 mm dia gun metal wheel valve
with required accessories, pressure gauge and
paintingwith synthetic enamel paint of approved shade
as required. (DSR 20)
12
179369
14947.47
Providing & fixing of pressure switch in M.S. pipe line
including connection etc. as required. (DSR 22)
11
13768
1251.64
Providing & fixing flow switch in following sizes M.S.
pipe including connection etc as required. 150 mm dia (DSR 23.2)
11
80973
7361.27
Providing, installation, testing & commissioning of
adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required. (DSR 29)
72
12370
171.81
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR(2018) 25 mm nominal bore
60
24757
412.63
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank. DSR(2018)
60000
438240
7.3
Fire Extinguisher : Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1131 (A)
62
468286
7553
Fire Extinguisher : Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1132
62
616490
9943.4
INTELLIGENT FIRE ALARM SYSTEM : Two Loop Panel.
6
1189756
198292.81
Supplying, installation, testing & commissioning of intelligent
analog addressable photothermal detector complete with
mounting base complete as required. (DSR 17.2.4)
281
663772
2362.18
Supplying, installation, testing & commissioning of response
indicator on surface/recessed MS Box having two LED,
metallic cover complete with all connections etc as required. (DSR 17.2.5 )
145
31652
218.29
Supplying, installation, testing & commissioning of fault
isolator complete with base as required. (DSR 17.2.7 )
39
105429
2703.31
Supplying, installation, testing & commissioning of
addressable fire control module complete as required. (DSR 17.2.10)
113
280432
2481.7
Supplying, installation, testing & commissioning of
addressable phone control module complete as required. (DSR 17.2.11)
26
70242
2701.65
Supplying, installation, testing & commissioning of
addressable beam detector with short circuit isolator (in built or seperate) complete with emitter and receiver including connections with remote test features etc complete as required. (DSR 17.2.12)
4
248262
62065.74
Supplying, installation, testing & commissioning of
addressable manual call point complete as required. (DSR 17.2.14)
66
211396
3202.97
Supplying, installation, testing & commissioning of
addressable horn cum strobe complete as required. (DSR 17.2.15)
66
191401
2900.02
Supplying, installation, testing & commissioning of fire fighter
telephone handset complete as required. (DSR 17.2.17)
66
313725
4753.41
Supplying, installation, testing & commissioning of fire fighter
phone jack complete as required. (DSR 17.2.19)
66
86935
1317.21
CABLING & WIRING
Supplying & laying of 2x1.5 sqmm fire survival armoured
cable, 600/1000V rated with annealed copper conductor
having glass mica fire barrier tape covered by an extruded
layer of Cross Linkable Ethylene Propylene Rubber (EPR)
insulation and LSZH inner bedding, steel wire armouring &
LSZH outer sheath complete as required. (DSR 17.5.1)
5500
1497320
272.24
CABLING & WIRING:
Supplying and fixing 25 mm dia MS flexible pipe with PVC
coating along with all ancillaries and accessories like coupler
etc. as required. (DSR 17.5.4)
5500
228250
41.5
EXTERNAL FIRE
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS 1520
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S.fabricated Common base plate, coupling, coupling guard,foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered with anti vibration pads.
2280 lpm at 56 m Head 1.6
4
1096277
274069.32
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump).Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads
2280 lpm at 56 m Head 2.6
2
1008694
504347.01
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common
M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 56 m Head 3.1
4
269570
67392.68
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : 5 INCOMING
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A
OUTGOING
( Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully
automatic Star/Delta starter suitable for 75 HP pump
with overload protection, current sensing type single
phase preventor complete with all acceessories and
internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF
operation.
100 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 5.2
2
477839
238919.65
PIPES & ACCESSORIES
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports,
anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia 6.2
1800
3549744
1972.08
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. Pipe 19.6.4
280
209636
748.7
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia 7.6
180
167626
931.26
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia 7.7
170
211508
1244.17
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia 7.8
150
256968
1713.12
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 200 mm dia 7.9
140
340001
2428.58
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal 10.1
40
248800
6220.02
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia 11.4
20
80377
4018.86
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia 1105
20
107136
5356.82
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia 11.5
20
144403
7220.17
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as
required.13
15
16072
1071.53
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :14 100mm dia 14.5
12
107926
8993.88
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :14 150mm dia 14.5
12
175066
14588.91
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :14 250mm dia 14.9
12
449006
37417.23
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.15 250mm dia 15.5
2
45206
22603.39
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :16 Gun Metal 16.1
15
64590
4306.04
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :18 Gun metal 18.1
15
29904
1993.66
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. For suitable dia MS pipe connection conforming to IS 904 as required :19 4 way-150 mm dia M.S. Pipe 19.2
4
45889
11472.26
Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.20
5
74737
14947.47
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.22
5
6258
1251.64
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.23 100mm dia23.1
5
30556
6111.29
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.23 150mm dia 23.2
5
36806
7361.27
Providing, fixing, testing & commissioning of
installation control valve of cast iron body,
brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :24 150mm dia24.3
8
318042
39755.34
Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thik suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.PWD-652
5
1155000
231000
S&F of 63 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.352
1
4050
4050
Supply and fixing of twin unit aviation obstruction light (GEC-ZH 752) / Bajaj BJAOL-2 with red glass, B.C. holders etc. complete in all respects, at the top of the building complete in all respect.`409
10
39450
3945
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25A TPN 807EII
5
132500
26500
Supply and Wiring of submains with 4 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. 289C
120
18120
151
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. 7258
15
150600
10040
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.1455
40
910000
22750
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 501I
1600
548800
343
50sqmm 3.5 core501I
50
24600
492
63 Amp 4 Pole MCB (9/10KVA) 1020A
15
34350
2290
S&F of 200 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.354
1
8950
8950
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. 814AII
1
301000
301000
S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. 379
1
14040
14040
Transportation ,Erection & Dismentling of Rig Machine IP JAL NIGAM
2
65360
32680
DC/RC Drilling from up to 100m Deep by 600 mm dia. UP JAL NIGAM
200
458000
2290
DC/RC Drilling from 101 to 200 mtr Deep by 600 mm dia. UP JAL NIGAM
150
393000
2620
Electric Logging of Bore Hole
2
36000
18000
Zone testing in water quality problem areas including all required all material ,labour T& P etc. complete in all repects. UP JAL NIGAM
2
80000
40000
S/O 300 dia. M.S.E.R.W 7.20 mm thick plain pipe Tata /Jindal/Surya Make.UP JAL NIGAM
110
429000
3900
S/O 200 dia. M.S.E.R.W 7.20 mm thick plain or slotted pipe Tata /Jindal/Surya Make.UP JAL NIGAM
230
634800
2760
lowering upto 100 mtr 300 dia. UP JAL NIGAM
110
40700
370
Lowering upto 100 mtr 200 mm dia.UP JAL NIGAM
90
22500
250
Lowering upto 101 to 200 mtr 200 mm dia.UP JAL NIGAM
140
43400
310
Transportation Installation & Dismentling of 350 PSI compressor.UP JAL NIGAM
2
56640
28320
Charges for development by 350 PSI compressor per hr UP JAL NIGAM
120
362400
3020
Transportation Installation & Dismentling of 1 Cusec/3Cusec OP unit & Yied test.UP JAL NIGAM
2
89760
44880
Charges for development by 3 cusec OP unit per hrUP JAL NIGAM
160
124800
780
Supply & filling of Lal Kuan Quarry Pre Gravel 1.6 mm to 4.8 mm sizeUP JAL NIGAM
130
780000
6000
S/I/T/C of 15 HP Pumping plant including starter Control Panel,cable complete in all respect with all required material Labour T&P etc.UP JAL NIGAM
2
305040
152520
S/I/T/C of Main piping & valves with 24 mtr Column pipe earthing printing ,tools sets, chain pilley Block & Gauges complete in all respect etc. 80mm dia Size.UP JAL NIGAM
2
328548
164274
3 mtr long heavy duty column pipe same as item no.10 UP JAL NIGAM
56
117600
2100
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD-501J
400
149200
373
Brick work 1:6 cement & coarse sand in foundation & Plinth including supply of all materials ,labour & T&P etc required for proper comperion of work.PWD 303
2.64
11880
4500
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth nd finshed even and smooth. (1)1 cement : 2 C. sand (FM 1.50-1.75) PWD-581
19.2
4032
210
White washing with two coats including supply of all materials labour T&P etc required for proper completion of work. PWD-672
19.2
249
13
Cement concrete with 2 cm gauge grit ballast approved coarse sand & cement in the proportion of 4:2:1 including supply of all materials ,labour & T&p ETC REQUIRED FOR PROPER completion of the workPWD-279A
2
12700
6350
S&F of 63 A. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect.PWD-352
2
8100
4050
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also).PWD-702
2
10700
5350
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 25 sq. mm 3-1/2 core PWD-503J
2
246
123
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25 sq. mm 504E
2
54
27
a)-Solar Module
Multi-crystalline (305 Wp) Make Renesola Solar/Vikram/Canadian or equivalent (MNRE Approved)-748 Nos (b)-Power Conditioning Unit 120 V with MPPT controller 3 phase supporting DC input of 5.5 KWp Environmental Testing Efficiency Measurements Environmental Testing TEC 60068-3 (12,14,30)/Equivalent BIS Std. IEC 61683/1S 61683 IEC 60068-2 (1.2, 14, 30)/Equivalent BIS Sid Make: Power-One/SMA/Schinder/Delta or equivalent (MNRE Approved) (e)-Batteries With Assessories Frame (12V or 2 Vor as per System Design) Maintainance free gel VRLA Bateries with 5 year warranty General Requirements & Methods of Testing Tobular Icad Acid/VRLA/ GEL Capacity Test Charge/Discharge Efficiency Self-Discharge As per relevant BIS Std. MAke: HBL/EXIDE or equivalent (MNRE Approved) (d)-Array Junction Boxes 120V 10 Input I Out with fuse & protection IP 54(for outdoor)/ IP 21(for indoor) as per IEC 529 A DC distribution box shall be mounted close to the solar inverter. The DC distribution box shall be of the thermo-plastic IP65 DIN-rail mounting type and shall comprise the following components and cable terminations -Incoming positive and negative DC cables from the DC Combiner Box -DC circuit breaker, 2 pole (the cables from the DC Combiner Box will be connected to this circuit breaker on the incoming side); ake: As per PWD Approvede Charges Exina) (2) LT Panel to Weightffridge/Checkp 10 sqmm X2 core) Maker As per PWD Approvedt Charges Fixtiral (3) LT Panel to Pump House (26 sqm X 4 core)) Make: As per PWD Approved Charges
100
8400000
84000
supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps elu (1)) 10 sqmm X 2 core (SINO-501 b) (2) 16 sqmm X 4 core (SINO-5011) (1)) 10 sqmm X 2 core (SINO-501 b)
500
146000
292
supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps elu (1)) 10 sqmm X 2 core (SINO-501 b) (2) 16 sqmm X 4 core (SINO-5011) 2) 16 sqmm X 4 core (SINO-5011)
500
171500
343
supply and taying of aluminum conductor PVC itulated armored, served, shealed cable 1100 Vols grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be property connected with the earth conductor by clamps elu (1)) 10 sqmm X 2 core (SINO-501 b) (2) 16 sqmm X 4 core (SINO-5011) (3) 185 sqmm X 3.3 care (SI NO-501 ) labour T&P painting and other material required for proper completion of the work as per direction) and satisfaction, of E/L
500
570000
1140
S/E changeover switch inculding the cost of labour T&P Painting and other material required for propwer completion of te work a sper the direction and satisfaction of E/I a) 400 A Four Pole (SI NO-381) (angle iron frame size 5mmx50mmx6mm)
1
23420
23420
S/E changeover switch inculding the cost of labour T&P Painting and other material required for propwer completion of te work a sper the direction and satisfaction of E/I 100A FOUR POLE (angle iron frame size 40mmx40mmx6mm)
1
8750
8750
S/E changeover switch inculding the cost of labour T&P Painting and other material required for propwer completion of te work a sper the direction and satisfaction of E/I 63A FOUR POLE (angle iron frame size 40mmx40mmx6mm)
1
4760
4760
OpEration and Annual Comprehensive Maintainance for 5 years (At the rate
of 2% of the Solar PV Project Cost
mentioned in item number I of PART A YEAR 1
1
-
-
OpEration and Annual Comprehensive Maintainance for 5 years (At the rate
of 2% of the Solar PV Project Cost
mentioned in item number I of PART A YEAR 2
1
168000
168000
OpEration and Annual Comprehensive Maintainance for 5 years (At the rate
of 2% of the Solar PV Project Cost
mentioned in item number I of PART A YEAR 3
1
168000
168000
OpEration and Annual Comprehensive Maintainance for 5 years (At the rate
of 2% of the Solar PV Project Cost
mentioned in item number I of PART A YEAR 4
1
168000
168000
OpEration and Annual Comprehensive Maintainance for 5 years (At the rate
of 2% of the Solar PV Project Cost
mentioned in item number I of PART A YEAR 5
1
168000
168000
S/F/C/T of LIFT SPECIFICATION-13 PERSONS -(AS per IS 14665 Standard, battery operated automatic rescue device with audio notifications and speech synthesiser (ARD) Shall be provided on all lifts to take the lifts to the nearest possible landing in case of power failure.)Name of lifts/Type of lift- One/ nextra- passenger.Load/ Speed – 13 Persons (884kgs.)/ 1.00 Mtr. Per Second and MTR with Re Gen drive ,pulse monitering system with belt required,Braille buttons- Micro Processor based VVVF.Travel/ PIT/ Headroom- 18 Mrter/ PIT 1500mm/ Headroom 4500mm.Number of Floors- 5 (G+4 Upper floors).Floor Display Char- G,1,2,3,4.Number of landing entrances- 5 (G+4 Upper floors).Number and Position of car entrances- 1 (one), in front only.Position of machinery- Directly above the lift well- gearless.Size of Lift well- 2660x3200 (MM wide x MM Depth x MM Height x MM E- Value).Lift Car inside size- 1450x1500x2200x (MM Wide x MM Depth x MM Height x MM C- Value).Clear opening of gates/ door/ lintel/ ec- 800x 2000 (MM Wide x MM Height) Lintel- 2200 mm. ECHR0206182.Additional car spec-Car Ceiling- car floor- Sleek (Small circular lights)- SS hair line finish -20 MM recess. Car Fittings- Led lights and cross flow- fan.Type of car front entrance protection- Power opera ted centre opening sliding door- stainless steel (1.5mm)- hair line.Land Entrance Protection (G,1,2,3,4)- Center opening sliding door- Stainless steel (1.5 mm) hair line.Landing door frame (G,1,2,3,4)- Stainless (1.5 mm)- hair line.Type of Control System- Microprocessor based simplex selective collective control with/ without attendant.Electric Supply- AC 3 Phase, 50 Cycles, 415 Volts+10 percent. (Without Machine Room) (APPROVED)
8
10800000
1350000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements