South East Central Railway Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
South East Central Railway - SECR Tender
Civil And Construction
Telecommunication Services
Water Storage And Supply
Ireps
Opening Date28 Mar 2025
Closing Date24 Apr 2025
Tender Amount₹ 3,64,27,399.94
Technical
Technical
Financial
Additional Eligibility
Technical Capacity
... View More
The bidder must have successfully completed or substantially completed any one of the following categories of work(s) during the last 07 (seven) years: - Three similar works each costing not less than the amount equal to 30% of advertised value of the tender.
- Two similar works each costing not less than the amount equal to 40% of advertised value of the tender.
- One similar work costing not less than the amount equal to 60% of advertised value of the tender. In case of composite works, the bidder must have successfully completed or substantially completed any one of the following categories of work(s) during the last 07 (seven) years: - Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender.
- Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender.
- One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Costs
EMD
₹ 3,32,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
E-R-T-11-25-26-RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLYTender No
E-R-T-11-25-26Tender Authority
South East Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
REINFORCED CEMENT CONCRETE // PRE-CAST RCC // Providing, hoisting and fixing 5 above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
42
9673
395114.11
... More
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Add for using extra cement in the items of design mix over and above the specified cement content therein.
20
688
13390.35
... More
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular, as per design and shape for floors and roofs in 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural 7 sources : 3 graded stone aggregate 10 mm nominal size derived from natural sources), including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but, excluding the cost of reinforcement.
1
-
27214.2
... More
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 8 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.
2
408
794.05
... More
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing aluminium 9 extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
1
-
832.75
... More
STEEL WORK // Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
900
93
81442.01
... More
STEEL WORK // Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
40
111
4354.85
... More
STEEL WORK // Providing and fixing in position collapsible steel shutters with vertical 12 channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
2
9397
18277.85
... More
FINISHING // Extra for plastering: // Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
320
214
66690.16
... More
ROAD WORK // FENCING // Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
31120
99
3024906.79
... More
CARRIAGE OF MATERIALS // By Mechanical Transport including loading,unloading and stacking // Lime, moorum, building rubbish // 3km
5
181
884.25
... More
STEEL WORK // Steel work in built up tubular (round, square or rectangular hollow 16 tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubes
15
154
2259.6
... More
STEEL WORK // Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
930
142
128699.68
... More
STEEL WORK // Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. // G.I. pipes
800
180
140195.6
... More
FLOORING // Providing and fixing 10 mm thick acid and/or alkali resistant tiles of 19 approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. // In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) // Acid and alkali resistant tile
12
1515
17685.3
... More
FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% 20 and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm
40
1416
55107.68
... More
ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of 21 masonry (lead caulking will be paid for separately): // Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter
15
319
4664.35
... More
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 22 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Single tee without door // 110x110x110 mm
1
-
185.5
... More
ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ 23 accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degrees // 110 mm bend
2
132
256.74
... More
FINISHING // CEMENT PLASTER (IN FINE SAND) // 15 mm cement plaster on the rough side of single or half brick wall of mix : // 1:6 (1 cement: 6 fine sand)
320
324
100922.16
... More
FINISHING // Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. // Two or more coats on new work
160
92
14431.9
... More
FINISHING // EXTERIOR FINISHING // Finishing walls with water proofing cement paint of required shade : // New work (Two or more coats applied @ 3.84 kg/10 sqm)
160
97
15186.56
... More
FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system 27 for interiors and exteriors using Primer as per manufacturers specifications : // Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
1450
158
224139.37
... More
FINISHING // CEMENT PLASTER (IN COARSE SAND) // 15 mm cement plaster on rough side of single or half brick wall of mix: // 1:6 (1 cement: 6 coarse sand)
3140
339
1035492.71
... More
FINISHING // Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : // Two or more coats on new work 30
15
131
1917.53
... More
ROAD WORK // ROADS // Supplying and stacking at site. // Moorum
142
888
122669.79
... More
SANITARY INSTALLATIONS // Providing and fixing white vitreous china water closet squatting pan (Indian type) : // Orissa pattern W.C. pan of size 580x440 mm
40
2758
107293.98
... More
SANITARY INSTALLATIONS // Providing and fixing soil, waste and vent pipes : // 100 mm dia // Sand cast iron S&S pipe as per IS: 1729
170
1018
168309.12
... More
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 100 mm diameter // Class I
12
4097
47822.49
... More
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 100 mm diameter // Class II
8
4500
35011.94
... More
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 150 mm diameter // Class I
10
5980
58159.88
... More
WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : // 150 mm diameter // Class II
1
-
6478.6
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : // 80 mm dia
5
6255
30417.13
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 : // Up to 600 mm dia
5
17155
83420.56
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : // Up to 600 mm dia
4.5
18025
78884.53
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : // Above 600 mm dia
1.5
25651
37419.63
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : // 150 mm dia pipes
400
156
60703.45
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : // 150 mm dia Ductile Iron Class K-9 pipes
1425
1625
2252014.6
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : // 100 mm dia Ductile Iron Double Flanged
120
1541
179904.72
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : // 150 mm dia Ductile Iron Double Flanged
81
2312
182192.92
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Dismantling old C.I. 45 pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: // 150 mm diameter C.I. pipe
1425
366
507484.54
... More
WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Labour for cutting C.I. pipe with steel saw. // 150 mm diameter C.I. pipe
10
-
2.75
... More
EARTH WORK // Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. // All kinds of soil
300
104
30487.88
... More
EARTH WORK // Earth work in excavation by mechanical means (Hydraulic 48 excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. // All kinds of soil
4180
205
835164.52
... More
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of 49 required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For fixed portion // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
30
433
12660.49
... More
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 50 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
30
531
15515.26
... More
ALUMINIUM WORK // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, 51 straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
7
1019
6942.29
... More
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 52 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
88
7783
666124.77
... More
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 53 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
110
7365
787886.92
... More
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in 54 position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
230
6833
1528460.75
... More
CONCRETE WORK // MISCELLANEOUS // Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of 55 concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works above plinth and upto floor V level : // Concrete of M20 grade with minimum cement content of 270 kg /cum 4.3.1 205.00 Sqm 307.95 63129.75 (-) 2.75 61393.68
3
10009
29202.72
... More
CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Centering and shuttering including strutting, propping etc. and removal of form work for : // Foundations, footings, bases for columns
-
-
56
... More
REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.
28500
89
2484761.81
... More
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing 58 strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works upto plinth level // Concrete of M25 grade with minimum cement content of 330 kg /cum
92
8683
776939.59
... More
REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing 59 strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works above plinth level upto floor V level // Concrete of M25 grade with minimum cement content of 330 kg /cum
46
10306
461047.86
... More
REINFORCED CEMENT CONCRETE // CAST IN SITU // Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15 60 degree up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%).
15
11107
162035.76
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concrete
332
307
99427.82
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Extra for arches, domes, vaults exceeding 6 m span
45
575
25174.38
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
490
669
319057.31
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform
140
766
104365.78
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Shelves (Cast in situ)
50
766
37273.49
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.9.6 937.00 Sqm 804.25 753582.25 (-) 2.75 732858.74
205
608
121282.18
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Columns, Pillars, Piers, Abutments, Posts and Struts
-
-
67
... More
REINFORCED CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Arches, domes, vaults up to 6 m span
175
1826
310804.92
... More
REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.
3550
89
309505.42
... More
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand)
250
6658
1618787.03
... More
MASONRY WORK // HALF BRICK MASONRY // Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. // Cement mortar 1:4 (1 cement :4 coarse sand)
1
-
990.05
... More
MASONRY WORK // Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: // Cement Mortar 1:6 (1 cement : 6 coarse sand).
5
5549
26986.63
... More
MASONRY WORK // EXPOSED BRICK WALL // Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : // Cement mortar 1:6 (1 cement : 6 coarse sand)
15
8190
119484.75
... More
MASONRY WORK // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:6 (1 cement : 6 coarse sand)
423
8288
3409557.82
... More
MASONRY WORK // EXPOSED BRICK WALL // Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894, in super structure above plinth and upto floor V level. // Cement mortar 1 : 4 (1 cement : 4 coarse sand)
1
-
942.98
... More
STONE WORK // RANDOM RUBBLE MASONRY // Random rubble masonry with hard 76 stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : // Cement mortar 1:6 (1 cement : 6 coarse sand)
2
6653
12940.96
... More
CLADDING WORK // Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base 77 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. // Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. // Granite work
10
418
4073.32
... More
WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL 78 BE ISI MARKED) // Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 100 mm
1
-
51.79
... More
WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. // 30 mm thick plain PVC door shutters
5
2455
11937.92
... More
WOOD AND P.V.C. WORK // COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) // Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) // 300x16 mm
1
-
175.58
... More
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : // 250x10 mm
1
-
364.06
... More
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass door latch with necessary screws etc. complete : // 250x16x5 mm
1
-
252.66
... More
WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass handles with screws etc. complete: // 100 mm
1
-
184.63
... More
WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL 84 BE ISI MARKED) // Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : // 250x16 mm
1
-
228.44
... More
WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL 85 BE ISI MARKED) // Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 150x10 mm
1
-
73.47
... More
Supplying and fixing on water tanks etc. slotted WATER indicator board with M.S. Pulley ball bearing type phosphorus bronze twisted wire, wood float etc. complete in all respect and in metric units. The rate includes fixing at all heights More than 1.25 m long 2
2
1722
3444.92
... More
Chain Link fabric mesh of size 50X50 mm size made of GI wire of 4 mm dia.
12000
497
5966520
... More
Erection of precast RCC/MS section/Sal balli post upto 2 m height including excavation in all types of soil, filling back loose earth and consolidating etc. complete for making the post rigid. Concrete work in foundation to be paid for separately.
4000
38
153320
... More
Providing 1.2m high welded steel wire fabric fencing /chain link fabric with 1.8m posts of specified material and design placed at every 3m apart embedded in cement concrete blocks every 15th post (or nearer as per site conditions), last but one end post
10000
18
187200
... More
Water proofing of Overhead & Underground water tank by : Providing and fixing 12mmN.B.M.S. threaded nozzle of 75mm length upto reqd. depth in an approximate grid pattern at a spacing not exceeding 1.5m c/c on entire flooring, walls etc. followed by inje
360
339
122320.8
... More
Supply of following materials from the approved manufacturers of epoxy materials like CIBAGIEGE at railways store Araldite GY-257
1350
522
705577.5
... More
Supply of following materials from the approved manufacturers of epoxy materials like CIBAGIEGE at railways store Araldite TY-250
1240
494
613229.6
... More
Supply of following materials from the approved manufacturers of epoxy materials like CIBAGIEGE at railways store Araldite HY-840
1100
449
494747
... More
Supply of following materials from the approved manufacturers of epoxy materials like CIBAGIEGE at railways store Silica flour.
1200
11
13740
... More
Special repair to cracked stone masonary /RCC by injecting epoxy under pressure including surface preparation, application of epoxy putty, sealing of cracks etc. complete special repair to cracked stone masonary /RCC by injecting epoxy under premix including repair to surface of RCC slab by using Epoxy plaster. The work includes surface preparation application of Epoxy putty sealing of cracks etc. complete in all respect as directed by the Engineer-in-Charge or his authorised representative at site. NOTE:1.In case of repair to RCC slab by plaster to cover the exposed 5 reinforcement the work includes epoxy grouting of cracks. Cleaning of entire surface to be epoxy plastered .Cleaning of all rust from reinforcement application of antirust agent(Sika BSF or Fosrock ) to all reinforcement application of one coat of mixture of araldite GY-250(Two parts by weight) Hardner HY-840(One part by weight) application of epoxy putty.(No extra payment will be given for antirust agent) 2.The ratio of mixing epoxy putty shall be normally 1 to 1.3:2:8 ( Hardner, Araldite, silica Flour)by weight.3.The payment will be made for total area covered by epoxy plaster. No extra payment for grouted cracks. However the cost of material will be as per actual consumption. The thickness will be 30mm maximum for any surface & should be increased suitably to give a level surface (No extra is payable on account of thickness of work done in multiple layer). 6
250
787
196770
... More
Supply of 8mm thick MS casting pipe of 600mm dia. 7
50
33284
1641257.22
... More
Placing & pushing 8mm thick MS casing pipe. 8
50
34704
1711264.1
... More
Laying of 8mm thick MS casing pipe of 600mm dia by open cut.
4
3166
12490.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%