Smarko Sangrahalayo Sansthao Parko Va Upvano Adi Ki Prabandhan Suraksha Evam Anurakshan Samiti Tender

Supplying & laying of 63mm dia (OD-63mm & ID-51mm nominal) size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc, conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench/surface complete as required. (CPWD Item no. 14.15.1)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mouting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC suport with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable calbe end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and insturment fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedetal type for Cat-B and C only. Incoming 100 Amp. TPN-1No. Outgoing 63 Amp. TPN-2Nos. CAT B cubicle type PWD SOR item no. 801A) II

Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 2000mm, outer pipe 48.4 mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducting the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I certified. PWD SOR item no. 726A

Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR item no. 716

Supply and Wiring of submain with two number 2.5 sq. mm. FRLSH PVC insulated 1100 V grade multi strand single core coppor conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one number 1.5 sqmm FRLSH PVC insuleted 1100 v grade multi strand copper conductor cable as earth continuty wire drawn in side the conduet. PWD SOR item no. 1301C

Supply and fixing of factory wired integral LED flood light kuminaries with die cast aluminium housing and lenses built with mandatory driver set suitable for 40 to 50 Watt. Confirming to IP 65/66 protection complete in all respect. CAT-AAA 4400-55001 system lumens SMD LED (Warm White) with lenses PF 0.95, THD 10% as full load, CRI 70, with 5 year warranty. PWD SOR item no. 1451

Supply and fixing of 10 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR item no. 501(H) less Item no. 501 (Rs 327-170)

S&F surface/ flush mouting 4 way TPN Distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer-in-charge.PWD SOR item no. 1026(A) CAT A

S&F of 40 amp. 4 pole isolator PWD SOR item no. 1007(A) CAT A

S&F of 6 amp.to 32 amp SPMCB (10K) C Curve PWD SOR item no. 1002(A) CAT A

Supply and fixing of 10 sqmm 4 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.PWD SOR item no. 530(B)

Supply and fixing of 35 sqmm 3.5 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.PWD SOR item no. 530(K)

Supply and fixing of 10 sq. mm plain or pin type copper tin plated cable socket (lug) to the cable leads, insulateing with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PWD SOR item no. 504(C)

Supply and fixing of 35 sqmm plain or pin type copper tin plated cable socket (lug) to the cable leads, insulateing with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PWD SOR item no. 504(F)