Smarko Sangrahalayo Sansthao Parko Va Upvano Adi Ki Prabandhan Suraksha Evam Anurakshan Samiti Tender

Supply and Fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and leses suitable for 140 Watt. to 150 Watt and Confirming to IP 66 protection having Company LOGO Engraved complete in all respect including Labour. CAT-AAA 15400-16500 system lumens High Power LED with lenses,110lm/W, PF0.95, THD 10% at full load, CRI70, Potted driver Set (NotCircuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, with 5 year warrantee. (PWD SOR-2018, Item No. 1425)

Supply and Fixing of LED Street light Fitting with mandatory drver set having die cast aluminium body and lenses suitable for 160Watt. to 175 Watt and Confirming to IP 66 Protection having Company LOGO Engraved complete in all respect including Labour. CAT-AAA 17600-19250 system lumens High Power LED with lenses,110lm/W, PF0.95, THD 10% at full load, CRI70, Potted driver Set (NotCircuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, with 5 year warrantee. (PWD SOR-2018, Item No. 1425A)

Supply & Fixing of wall roof type service bracket of 50mm dia 4 Meter long fabricated from class "B" G.I. pipe complete with two bends, sockets, wall clamps. 7/3.15mm G.I. stay wire, stay insulators etc. complete in all respect. (PWD SOR-2018, Item No. 601)

Supply & Fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (PWD SOR-2018, Item No. 619)

Dimantling of Pole/Street light standard/strut embadded in cement concrete foundation etc. as required.

Supply and laying of 35 Sqmm. 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PWD SOR-2018, Item No. 501(K)-Less Item No. 507)

Supply and fixing of 35 Sqmm. plain or pin type copper tin plated cable socket (lug) to the cable leads, insulation with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (PWD SOR-2018, Item No. 504(f)

Dismatling manually/by mechnical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: bituminous road.

Dismatling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-in-Chage with in a distance of 60 metres (200 ft.). (PWD SOR-2019, Item No. 694)

Providing , laying and fixing 50 mm dia G.I. (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required

Dismantling of tiled floor cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metres (200ft). (PWD SOR-2019, Item No. 698)

Chequired precost cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). Dark shade pigment using ordinary cement. (PWD SOR-2019, Item No. 11.20.3)

Supply and Drawing of 2 x 2.5 sqmm FRLS PVC insulated copper conductor, single core cable in existing recessed steel/PVC conduit as directed at site by Engineer in charge.

Supply and Drawing of 4 x 2.5 sqmm FRLS PVC insulated copper conductor, single core cable in existing recessed steel/PVC conduit as directed at site by Engineer in charge.

Supply and Drawing of 6 x 2.5 sqmm FRLS PVC insulated copper conductor, single core cable in existing recessed steel/PVC conduit as directed at site by Engineer in charge.

Supply & Fixing of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G./Teak wood board (Sintex) complete in all respects. Cat.B (PWD SOR-2018, Item No. 305)

Supplying and laying of 63 mm dia (OD-63mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying and laying of 63 mm dia (OD-63mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench complete as required.

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. (PWD SOR-2018, Item No. 634)

S&F of 400 Amp. 415V metal clad T.P.N. CFS complated with HRC fuse etc. on angle iron frame complete in all respect. (PWD SOR-2018 (E/M), Item No. 356 Cat.B)

S&F of 63 Amp. 415V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracked complete in all respect. (PWD SOR-2018 (E/M), Item No. 316 Cat.B)

Providing and laying Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ballast 20 mm. nominal size) including supply of all materials, Labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation and floors. (PWD SOR-2019, Item No. 279(b)

Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.(CPWD DSR-2018, Item No. 12.37, Rate of Analysis attached)

Supply & eraction of factory fabricated and wired metal clad dust and vermin proof floor mounting panel. TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic aluminium busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indication lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-charge. All outgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minium thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 400 Amp. TPN-1 No. Outgoing 200 Amp. TPN-1Nos, 100 Amp. TPN-1 Nos. & 63 Amp. TPN-2 Nos. Cat. B. Cubicle Type (PWD SOR-2018, Item No. 804 (d)-ii)

Supply & eraction of factory fabricated and wired metal clad dust and vermin proof floor mounting panel. TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic aluminium busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indication lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minium thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 630 Amp. MCCB-1 No Outgoing 200 Amp. MCCB-2Nos, 100 Amp. MCCB-1 Nos. & 63 Amp. MCCB-2 Nos. Cat. B. Pannel Cubicle Type (PWD SOR-2018, Item No. 814 (b)-ii)