Sarjoo Sahkari Chini Mills Limited Tender

A- Vaccume Circuit Breaker (VCB) 630amp, Cassette type closing & triping coil 230VAC, Spring Charging, Motor 220VAC, L&T make B- Complete VCB panel Base Mounted with Required Materials 1- Current Transformer100/5amp, Dual core metering class 05, Core 2 Protection - 03 nos. 2- Potential Transformer 100VA, 11KV S //110VS3, fixed cl - 0.5 - 01 nos. 2- Digital ammeter (0-100amp) - 01 nos 4- Digital Voltmeter (0-11KV) - 01 nos. 5- Protection Relay, overload, Earth fault - 01 nos. 6- Indicating light R,Y,B,On, Off, Trip, TCH, SC - 08 nos. 7- Control MCB as required. 8- Selector switch (Local/Remote) - 01 nos. 9- Push Button Emergency Stop, Mushroom head - 01 nos. 10- Breaker control 16amp, 2NC - 01 nos. 11- Auxiliary Contractor 2NO + 2NC - 01 nos. 12- Hooter - 01 nos. 13- Panel illumination - 01 nos. 14- Space Heater with thermostat - 01 nos.

1- MDI Controller panel with Incomer size 1575x800x800mm, Indoor type base mounted with suitable paint. Equipments details are given below which will fitted in above panel a- MDO, ACB MP based release O/C, S/C Protection, 630amp, TP - Siemens,make 01 no b- Power contractor 500A, FP coil - 415V AC, Siemens make 01 no c- MDI controller with programme 230V AC, 92x92 sqmm 01 no Pentocon make d- Digital Amp meter )0-600A), 96x96mm with ASS - 01 no e- Digital volt meter (0-600V), 96x96mm with VSS 01 no f- On delay timer 230V AC 01 no g- R.Y.B, Phase Indicator LED type - 230V AC - 03 nos seimens make h- On/Off indicating Lamp, LED type - 230 V AC - 02 nos Siemens make i- Auto/Manual selector switch - 01 nos j- Start/Stop push button 02 nos k- BA 10KASP, MCB for controlling siemens make 04 nos l- CT'S for metering 600/5A, 15VA, CL-1 tape wound 03 nos AE/KAPPA make