Saharanpur Development Authority Tender

Earth work in cutting in ordinary soil dressing the surface to required levels and slopes and also including 1.50M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30M distance as directed by Engineer-in-charge.SI 253a

Construction of granular sub-base by providing coarse graded material. Spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.(A.R)

Providing laying spereading and compacting graded stone aggregate to wet mix macadam specitfication including premixing the material with water at OMC in mechanical mix plant carrage of mixed material by tipper to site. Laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(A.R)

Providing and applying primer coat with 80/100 bitumen emulsion on prepared surface of granular base including cleaning the road surface and spraying primer at the rate of .60 kg/sqm using mechanical means including supply of all materials, labour, T&P etc. required for proper comletion of the work as per clause 503 of MOSRT&H specifications and as per direction of the Engineer-in-charge (A.R. approved)

Provinding and laying Dense Graded Bituminous Mecadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggegate of specifled grading premixed with bituminious binder @ 4.5% by waight of total mix and filler, transported to site, laying with hydrostatic paver fixing with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per morth & h specifications clauses 507 complete in all respects.

Providing and applying tack coat with 80/100 bitumen emulsion on prepared surface of granular base including cleaning the road surface and spraying primer at the rate of 0.30 kg/sqm using mechanical means including supply of all materials, labour, T&P etc. required for proper comletion of the work as per clause 503 of MOSRT&H specifications and as per direction of the Engineer-in-charge (A.R. approved)

Provinding and laying bituminious concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggegate of specifled grading premixed with bituminious binder CRMB-55 @ 5.4% by waight of total mix and filler, transported to site, laying with hydrostatic paver fixing with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per morth & h specifications clauses 509 complete in all respects. (A.R)

RCC work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportin 1:11/2:3 (1cement: 4.5 aggregates) in wall/slabe foundation and footings excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering & shuttering etc and also including supply of all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 284a)

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and including cost of binding wire.S.I. No-504

Providing and laying of hot applied thermoplastic compound 2.5mm thick including refectorising glass beads @ 250gms per area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35, The finished surface to be level. Iniform and free from streaks and holes, Rates are including of all taxes. royailty, vat etc. all T &P/machine material and labour required for proper completion of work. S.I. No-5/Ch-27 Signage

Reflective raised pavement marker providing and fixing of raised parvement markers (cat Eye) type x-ASTMD-4956-04 Avery dennishion/m-3m (USA Make) having moulded body of polycarbonate ASA HIPS or ABS able ot support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MORT & H Circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light) electronically welded to the body. The length height and width of the body shall not excead 130mm, 20mm and 105mm resperctively, The area (if each less than 13sq cm. on each side sloping at the angle of 35+5 degree to the base to ensure maximum reflectively it shall comply to apecification of Category a of Mort & H circular no. RW/NH 33023/10/97 -DD-III dated 11.06.97 lenses shall be moulded of methyl methecryles conforming to ASTMD 788 or equivalent with 7 years warranty rate shall be inclusive of all taxes, royalty, Vat etc. All T&P machine material and labour required fo rproper completion of work. S.I. No Signage New Item-9 (with Shanks)

Supply and Instalation of delinators as per I.no- New Item 27/10

Providing and applying Two coats of white cement based putty of average thickness 1 mm, of approved brand and manufacturer such as Berger/J.K./Birla or similar make, over the plastered wall surface to prepare the surface even and smooth complete. S.O.R. New Item./Painting & Distempering.

Paintings on new wall with one coat of ready mix priming paint and two coats of approved superior quailty ready mixed paint or clear synthetic varnish ( Berger, dulux,, Narolac, Shalimar) including supply of all materials, Labour,T&P etc. required for proper complete of the work. pain to be used should confirm to the ISI no. 1950 (PWD SI. No-641+642)

Relaying of interlocking tiles labour only Including 40mm local sand base (S.I. No-New Item -16+ Materil Item no-39a+20%Vat &lodeing unl)

Providing and fixing of M.S. informatory sign Board made of 2mm thick M.S. sheet welded on M.S. angle iron frame of 40X40X5mm size with diagonal braces of 25X3mm flat iron including fixing in 1:1.5:3 c.c. of 300X300X450 mm over 10 cm thick base of P.C.C. in proportion of 1:5:10 and also including writing on M.S. sheet over and including painting two or more coats with approved superior quality ready mixed paint over one coat of priming paint including supply of all materials, labour T&P etc. required for proper completion of the work as per drawing and direction of Er-in-charge.(A.R.)