Saharanpur Development Authority Tender

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m MORT&H AoR

Disposal of dimantling material including loading and unloading up to 3.00 Km cartage complete as per instruction of Engineer in-Charge. PWD SOR SI-231(a)

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. S.I. No. 281

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in R.C.C. Raft foundation and footing excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. {S.I. No-287a+diff. of 1:1.5:3 &1:2:4(284a-284)}

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 MORT&H AoR

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (W.M.M.) MORT&H AoR

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. MORT&H AoR

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. MORT&H AoR

Providing and applying tack coat with bitumen V.G. 10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H AoR

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects MORT&H AoR.

Supplying, Fitting and Placing un-coated HYSD/TMT bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. MORT&H AoR

Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. PWD SOR Ch.-20 SI-761C

Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) PWD SOR Ch.-20 SI-New Item 15

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 300 mm high in M 20 grade on M-15 grade foundation Concrete beyond kerb stone all complete as per direction of E/I and clause 409 (exclusive cost of foundation concrete) MORT&H AoR

Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) SOR- New Item-14 PWD SOR Ch.-20 SI-New Item 14

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG PWD-SOR Ch.-10 SI-10.26

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (for repeated/transverse bar marking) Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. PWD-LKO SOR Ch.-27 SI-New Item 3

Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm exclusive of surface applied glass beads as per IRC 35-2015. The finished surface to be level, uniform and free from steaks and holes. PWD SOR Ch.-27 SI-New Item 7

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work excluding GST. (60 cm Circular with diffinitation plate (20 cm x 60 cm)) PWD SOR Ch.-27 SI-New Item 6(c)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work excluding GST. ( 60cm equilateral triangle with diffinitation plate size (20cm x 60cm)) PWD SOR Ch.-27 SI-New Item 6(b)

Retro-reflectorised Traffic sign as per IRC 67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. 80 mm x 60 mm rectangular with diffinitation plate (20 cm x 50 cm) PWD SOR Ch.-27 SI-New Item 6(d)

Retro-reflectorised Traffic sign as per IRC 67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender.30 x 90 cm (Left/Right) Object Hazard PWD SOR Ch.-27 SI-New Item 6(j)

Reflective Raised Pavement Marker Providing and fixing of raised pavement markers (Cat Eye) Type x-ASTMD-4956-04 Avery Dennision/3m(USA Make) having moulded body of polycarbonate, ASA, HIPS or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. The length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of Category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent. With 7 years warranty. Rate shall be inclusive of all taxes, royalty, etc. All T&P/ machine material and labour required for proper completion of work. PWD SOR Ch.-27 SI-New Item 10

Providing and fixing of M.S. informatory sign board of size 1x1.5 mt. with frame of 40X40X5mm angle iron and diagonal braces of 30X5mm flat iron. 16 S.W. gauge M.S. Sheet shall be fixed on the M.S. Frame including one coat of ready mixed priming paint and two coats of apporved superior quality ready mixed paint on the whole structure and also painting letters on M.S. Sheet firmly fixed to the ground with 15 grade cement concrete 35x35x35 B.G.L. Complete as per approved drawing and direction of Engineer-in-charge. (A.R.)

Utility shifting such as water line, Street light, Camera Line etc. as per site requirement and as per instruction of E/I. (Payment will be done item wise work excuted at site )

Construction of room for police chowki as per site condition and as as per instruction of E/I. (Payment will be done item wise work excuted at site such as excavation, PCC, Brick work, Plaster, RCC, Steel, Aluminium, Glass, water Supply and sanitary work etc. as per site)