Saharanpur Development Authority Tender

Recoveries of brick bats obtained from dismantling of brick work. (Basic Rate)

RCC work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportin 1:11/2:3 (1cement: 4.5 aggregates) in lighterbeam, excluding of supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering & shuttering etc and also including supply of all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 285+diff of cement)

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorised overlapping shall be measured and including cost of binding wire.S.I. No-504

Concrete with 4cm guage stone ballast, fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors including all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 273).

Cement concrete with 2cm. guage approved stone ballast, coarse sand & cement in the proportion of 1:1.5:3 including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. S.I. No-279(a)+ Diff of cement

Mild steel or iron work in M.S. grills/Stair case railing/gates/truses/racks etc., wrought to required form including supply of steel bolts, nuts, wastage etc., and their fixing required for proper completion of the work. (PWD S.I. No. 502 A)

Mild steel or iron work in heavi size built up gates etc, wrought to required form including supply of steel bolts, nuts, wastage etc., and their fixing required for proper completion of the work. (PWD S.I. No. 503)

Paintings or Varnishing on iron work or new wood work with one coat of ready mix priming paint and two coats of approved superior quailty ready mixed paint or clear synthetic varnish ( Berger, dulux,, Narolac, Shalimar) including supply of all materials, Labour,T&P etc. required for proper complete of the work. pain to be used should confirm to the ISI no. 1950 (PWD SI. No-641+642)

Writing on M.S. sheet/wall with artistic painting/drawing with attractive multicolour paint as per direction of engineer in-charge over and including painting two or more coats with approved superior quality ready mixed paint over one coat of ready mixed priming paint including supply of all material, labour, T&P etc. required for proper completion of work. (A.R.)

M-150 Brick work in1:4 cement & four coarse sand in foundation for 9" thick wall supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SI-305A

12 cm thick plaster with cement and coarse sand in 1:4 over brick work minimum thickness plinth with cement and coarse sand. S.I.No-584(a)

4" dia rain water pipe. S/F of 10cm internal dia PVC(Kishan/ Suprime) down pipes everst of charminar make complete with bends with door at top and plain at bottom and gratings and I/C supply of all necessary M.S. clamp 2.5cm. X 3cm fixed to walls & I/C supply of 15cm. long 6mm dianails all materials, labour & T&P etc.(SOR Item No-730A)

Providing wall putty on New surface with approvel quality material of berger/J.K./Birla or simila make 2 Coats. New Item

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete on concrete work I.No-13.52.2/DSR-2016

Retro reflective signboard made up of 2 mm thick alluninium sheet, face to be fully covered with 3M high intensity prismatic reflective sheeting series 3930, letters/simbols shall be made of same retroreflective sheeting and computer cut as per colour required. Boards are to be supplied alongwith back support frame of stainless steel angle (Grade 304) size 25X25X3 mm and back side of allumunium sheet shall be painted with stove enamel paint, with 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, royalty etc. all T&P /machine material and labour required for proper completion of work. Note : The composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judical stamp of required denomination both for retro reflective sheet and also complete signage. S.I. No-New Item at s.no 4/ Ch. 27