Rural Engineering Department Tender

R.C.C. work with Cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in R.C.C Columns SI.No. 289.

First class Brick work in 1:6 cement and coarse Sand morter in foundation & Plinth inculding supply of all materials Labour T & P etc.required for proper completion of work. As per S.I. No. 303

R.C.C. work with Cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in P/L beam SI.No. 283A

First class Brick work in 1:6 cement and coarse Sand morter in Super Structure inculding supply of all materials Labour T & P etc.required for proper completion of work. As per S.I. No. 303 +309+310

R.C.C. work with Cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Lighter beam SI.No. 285.

R.C.C. work with Cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Slab SI.No. 284A

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. S.I.No. 504

12 m.m. thick Plaster with Cement mortar consisting of one part of cement and 4part of coarse sand of 2.25 FM on brick work including supply of all material, labour, T&P etc.S.I No 584(i)

12 m.m. thick Plaster with Cement mortar consisting of one part of cement and 6 part of coarse sand of 2.25 FM on brick work including supply of all material, labour, T&P etc.S.I No (586+596)

Cement concrete with 4 cm. (1½") gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. S.no 279(i)

2.5 cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm.(3/4")graded approved stone shingle laid in panels finished with 3 mm.(1/8")floating coat of neat cement or cement and marble dust in 5:1 as specified over & including 8cm.(3") 'thick. base concrete consisting of cement ,local sand and brick ballast 4cm.(1½") gauge in the proportion of 1 :4:8 and removing any over lapping mortar at the joints of Panels if any and giving them a uniform finish including supply of all materials, labour' and T&P etc. requierd for proper completion of the work. s.no 601(a)

P/L of Vctrified floor tiels in different sizes (thickness to be specified by the manufacturer ) with water absorption's less than 0.8% and conforming to IS:15622 of approved make in all colours and shades ,laid on 20m.m thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.,complete As per S.NO. Chp.14 D.S.R 11.41

Providing and laying "Brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm. x 30 cm. and side wall parapet shall be mono tythic plaster wall upto 30 cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc. complete for proper completion of work.( s.no ch 11 of new item -1)

Supply and fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0m.m thick I.S.I Marked G.P sheet spot welded four to eight holes of 25.4 m.m for pipe entry of the box Holes should be semi-shuttered type with 0.5 m.m g.p Sheet made upper & lower cover duly screwed fitted with 300 m.m round zink coted M.S Bar X12 m.m & brand name should be embossed . Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material ,labour,T&P etc. required for proper completion of the work.as per S.I No.E-S.O.R 1149

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.dsr 13.26

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.). Dsr 13.46.1

Distemperiing oil bond of approv. brand two coat over priming Coat New surface . S.I. 649 & 650

Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer- in-charge. DSR 9.145

Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.DSR 9.146

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.) dsr 9.147.E2.1

M S Iron work such as Chuokhat frame With Sheet as per S.I.No 502(b)

Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specification sna direction of the Engineer-in-charge. as per S.I.No.13.76

Making drip courase in sun shade or facia with 1:3 cement and fine sand mortar as per direction of Engineer in charge including supply of all materials labour tools & plants etc required for proper completion of the work S.I.No. 600

Sand filling in plinth i/c supply of necessary quantity of sand from a distance not executing 8 km from the site of work and including watering, dressing etc. Rate including cost of all materials labour T & P etc. required for proper completion of the work (Including royalty) As per SI. No. 255

Earth Work in embankment in ordinary soil excavation to be in the regulour pits not exceeding 0.5 m depth and earth work in embankment to be in 20 cm layers including ramming and dressing the surface to required levels and slops and also in inculding 1.5 m lift & 30m lead.including watering dressing ...... as per SI.No. 253 upto a cartage of 3 km. distance.As per SI 253+C

S/F of informatory sign board.........i/c painting,writing & fixing at site.... Complete.

Wiring points with 1.5 sq.mm FRLSH P.V.C insulated multistrained copper wire in p.v.c concealed conduit with 1.5 sq.mm. p.v.c. insulated multistrained copper earth contuinity wire inside the conduit using modular board & modular switc socket complete in all respect for the following (a) Light points (131c & 187A)

Fan points (133c & 187A)

5A plug (134c & 187C)

S/F of 15A/240V power plug with 15A/240V flush type switches complete on the existing board complete in all respect,(1139A)

(a)S/F of 6A to 32A S.P. M.C.B(1002,CATB)

(a)S/F surface/flush mounting 6 way TPN distrbution board with additional metal door without M.C.B Complete in all PWD S.I 1027(A) cate B

S/F of electronic fan regulator(Modular) 120-180volt ISI mark on the existing board including making connection,required of engineer in charge of work, (1203 c)

Supply&Fixing of LED Tube fitting with batten suitable for up to 1*22 watt LED tube light fitting including tube on surface comp. in all respect ,(1413 A CAT AAA)

Supply and Wiring of sub main with two Number 4 sqmm FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia in walls with one No.2.5 sq mm as earth continuity wire drawn in PVC conduit complete (216-c)

S/L of aluminium conductor pvc insulated armoured served sheathed cable 1100 volts(10 sq mm 2 core)dsr 501b

Supply of 1200 mm sweep ceiling Fan complete including down rod and blades complete in all respect (Havells make model ES Plus 2Star.