Rural Engineering Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rural Engineering Department Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date25 Apr 2023
Closing Date22 May 2023
Tender Amount₹ 3,61,00,000
Costs
EMD
₹ 7,22,000Document Cost
₹ 2,714Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_REDUP_798739_2Bid Award Id
ViewTender No
1609/RED/NIT/2022-23 Dated 29.03.2023Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Cement concrete With 4cm gauge approved stone ballast coares sand and cement in proportion 8:4:1 including supply of all material,labour and tools and plants. ect. required forproper completion of work. In foundation and floors.S.I.NO-281
200.65
1153737
5750
Providing and laying in position machine battched and machine mixed design mix M- 25 grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge cement content considred in this item as @330kg/cum minimum .All works upto plinth level. LKO SOR serial no. 25, 5.33.1
250.11
2440073
9756
Providing and laying in position machine battched and machine mixed design mix M- 25 grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge cement content considred in this item as @330kg/cum minimum
536.59
5778001
10768
Providing and laying in position ready mixed M- 25 grade cement concrete for RCC work using cement content as per approved design mix. manufacture in fully automatik batching and transprt to site of work in trangist mixer for all leads having countinues agitaed mixer manufacture as per mix design of specified grade for RCC work Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge cement content considred in this item as @330kg/cum minimum.all works above plinth level upto floor V lavel upto plinth level
115.71
950441
8214
M.S.(Tor steal or plain) in plain work such as R.c.c or R.B work including cutting Binding for proper shape & including all supply of steal and its wastage bend,hooks and authorised over lapping shall be measssuredetc. (S.I.No. 504)
1250
10250000
8200
M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. S.i.NO-307(A)
18.1
89595
4950
E/W embankment cutting or inembankment inordinary soil,excavation to be in the form regular pits not exceeding 0.50M in depth and earth work in embankment to be in 20cm Layers including remming and dressing the surface to required level and slope and also including 1.5M lift and 8.00km lead . The earth from cutting to be use in making embamkment or to be deposite as spoil banks with in 8.00 km distance as directed by the Engineer incharge S.I. No. 253(a)+231
154.28
43815
284
M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. S.i.NO-307(A) (230MM)
125
683125
5465
Half Brick masonry with comon burn clay (non moduler) brick of class -150 in super structure above plith lvl upto floor v lvl. In all shape and size in 1:4 (1: cement, 4: coarse sand)
198.55
156854
790
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. Bars at every third course of half brick masonary
198.55
15288
77
Homogeneous Vinyl floor (armstrong) impurity with daimond 10 coating. Thickness 2 mm and 2 mtr wide. Thickness of wear layer would be 2 mm and single layered. Operation complete as per direction of E /Incharge
1389.51
1736887
1250
providing extra labour and materials required in finishing of Trimix Vacuum Dewartring the Concrete Floors using TRIMIX or equivalent over item no 5.4 and finishing the top surface to required level/ slope and grade with Smooth finish using power trowels (both fan and disc) or standered make including curing, providing and mixing of hardening compound @2kg/Sqm of approved make , cutting of Vdf floor 5-40mm size with daimond saw system (disposal of debris to be included in the quoted rate) as per specification including filling of colpor of Fosroc/Polysulphite make etc. complete as per specification . ( Maximum thickness of R.C.C. flooring shall be of 150 mm) At all height/depths and level.
771.42
273082
354
Providing and laying of 125 micro thick Hdpe polythene sheet in proper position Bellow CC Floor
771.42
26999
35
Supply & fixing 6 mm thick approvedChina white/coloured glazed tiles inflooring or dado laid with 1:3 cement andapproved coarse sand mortar finished andjointed with white cement slurry andpigment &polishingcompleteincludingsupply of all materials, labour and T&P etc.required for proper completion of the work.
144.37
137151
950
Providing and fixing rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15822, of approved make, in colours except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm. Including grouting the joints with white cement and matching pigments etc, complete.
47.41
46841
988
Laying of 25mm Kota stone of size 45x45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per directed of Engineer in charge including cutting polishing with wax polissh including supply of all materials,labour and T&P etc reqired for proper completeof the work.
75.83
79621
1050
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-
Charge. Rs 418.83-20%
105
36435
347
4 c.m thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone laid in panels finished with 3 mm.flooring coat of neat cement or cement and marble dust in 5:1 as specified over & removing any over lapping mortar at the joints of panelsif any and giving them a uniform finish including supply of all materials, labour and T & P etc. required forproper completion of the work. above but without base concrete. S.I.NO-605
494.83
173190
350
providing&fixing glass strips of in joints of floors & skirting or dado add the time of laying floors, flash with floors level ,including supply of all materials,labour and T&P etc reqired for proper completeof the work but 3.70 c.m depth. (S.I.No. 631(d)
494.83
10886
22
6 mm cement plaster of mix 1:3(1cement amd 3 coarse sand ) ceiling
1528.91
201816
132
Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal
size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top
layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
13.19.1 Ordinary cement finish using ordinary cement
1198.98
748163
624
15mm cement plaster on rough side of single or half brick wall of mix 1:4 ( 1 Cement : 4 Coarse sand)
729.27
158251
217
Providing and applying white cement based putty on new surface with aproved qlty material burger/jk birla as similar make 2 coat etc. PWD MBD SOR Ch -15 New item -12 page No-43
3457.16
197058
57
Finishing walls with Premium Acrylic Smooth exterior paint with silicon additive of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Rs 166.85-20%
1198.98
165459
138
painting with synthetik enemal paint or approved band and manufacture of required colour to given an even shed two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand ISI material and manufacture PWD SOR MBD CH- 15 NEW ITEM(A)+2+4(3)
2258.18
180654
80
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)
1.89
15558
8232
Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50m in height dimension comprising of UPVC multi chambered frame with inhuilt roller track and sash extruded profiles duly reinforced with 1.60 x 0.,2mm thick galvanised mild steel section made from roll formingg process of required length (shape & size according to UPVC profile).Three track three panels sliding window with fly proof SS wire mesh ( two nos. glazed and one no. wire mesh panels) made of (small series) frame 92 x 44 mm and sash 32 x 60 mm both having wall thickness of 1.9+/- 0.2 mm and single glazing bead of appropriate dimension (area of window upto 1.75 sqm.). (three track slider window with mesh)
77.76
604428
7773
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
9.45
49262
5213
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separatelyttom and sides with required Polyester powder coated aluminium (minimum thhickness of polyester powder coating 50 micron) Rs 474.70-20%.
1764.01
695019
394
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. 12 mm thick
92.41
93241
1009
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
221.95
200420
903
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections.upto 5mm depth and 5mm width.
239.1
21519
90
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
14.7
57638
3921
Providing and fixing of stainless steel 304 grade handle for door 600 mm long.(Ozone make)
14
16800
1200
Providing and fixing of Ozone make locks for toughened door including cost of all material labour etc complete
7
6300
900
Supplying and fixing rolling shutters of approved make made of required size of M.S. laths interlocked together througgh their intire length and jointed together at the end by end locks mounted on specially designed pipe shall with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25m M.S. Laths with 1.25mm thick top cover
22.46
51725
2303
Providing and fixing ball bearingg for rolling shutters
4
1456
364
Extra for providingg mechanical device chain and crank operration for operating rollingg shutters.Exceeding 10.00 sqm and upto 16.80 sqm in area (say average 14 sqm)
18.14
17414
960
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for
payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).S no 10.27 page no 27
175.5
78975
450
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
25.84
7261
281
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
391.64
451560
1153
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.(1444.90-20%)
398
477202
1199
Providing and fixing on wall face unplasticised 110mm Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes. Rs 319.75-20%
157.5
41737
265
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Rs 138.00-20%
28
3052
109
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. Rs 309.50-20%
84
21504
256
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment
237.33
110358
465
costruction of information pillar in brick work with black granite stone(2"x2.5") size with b/w in 1:4 in 1:20m wide wall,23to35cm thickness &1.35m height above G.L.with plaster in1:4 including diigging and painting of letter ,snowcem two coats and including all incuding all material,lobour and T&P etc.
1
9000
9000
Earth work in excavation in foundation in ordinary soil i/c lift up to 1.50 m. & lead up to 30m including filling,watering and ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth i/c all as per comp. (S.I.No. 251)
105.27
11579
110
Cement concrete with 4cm gauge approved stone grit, coarse and cement in the prapostion of 8:4:1stonne blast ,coarse sand and cement Supply of all materials, labour, tools and plants etc. required for proper complition of the work. S.I.NO-281
4.29
24667
5750
M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. S.i.NO-307(A)
11.79
58360
4950
Providing and laying in Cement concret 4:2:1 of not less than strength of M150stoneballast(40 mm nominal size) 2 apprrovedcoarsesand :1 Cement and curingcomplete,including cost of form work infoundation and floors
2.32
15544
6700
M.S.(Tor steal or plain) in plain work such as R.c.c or R.B work including cutting Binding for proper shape & including all supply of steal and its wastage bend,hooks and authorised over lapping shall be measssuredetc. (S.I.No. 504)
227.63
18665
82
20 mm thick cement plaster with 1:3 neat cement and coarse sand mortar(DSR No 13.9.2) 507.85-20%
46.46
19559
421
2.5c.m thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone laid in panels finished with 3 mm.flooring coat of neat cement or cement and marble dust in 5:1 as specified over & removing any over lapping mortar at the joints of panelsif any and giving them a uniform finish including supply of all materials, labour and T & P etc. required forproper completion of the work. above but without base concrete. S.I.NO-605 A
10.57
2431
230
Providing and laying 150mm PVC pipe (6kg.Per cm ) I.S.I. Including cost of P.V.C. i.e socket/tee/ elbow etc and including earthwork and cost of solvent complete(DSR no 23.3.2)For Rain Water & Boring Rs 668.50-20%
225
124650
554
Providing and laying cement concrete 1:5:10 all round 150mm .S.W./PVC pipes including bed concrete as per standered design (DSR no 19.2.2) Rs 1095.15-20%
170
154360
908
Supply of Horizontal filter of screen made up of SS-304 150MM (6") having 0.5MM slot size & effective total length of 500 MM The end connection is of 6" PVC slipon to the
Modular Rain Water Harvesting Tank( As Per Rate Senction By SE MRT Ltr no 21 dt 03-04-2023 s n 1
1
36400
36400
Supply of borewell / ECORAIN Buffer Modular tank which is made up of 100% polypropelene material wrapped by 400 GSM Geotextile. The Modular structure with large and 4 small plates having 97% of void volume ratio Fixed thru the Clips of each module to avoid any collapse or make the entire modular structure intact and design to bear 25 tons per sqm of load as per specificaion the size is 685MM x 408MM x 450MM As Per Rate Senction By SE MRT Ltr no 21 dt 03-04-2023 s n 2
17.49
345252
19740
Supply 400GSM Geotextile: - To avoid invasion of soil, provide stability to the tank, and improve quality of water within the tank with tensile strength.(as per As Per Rate Senction By SE MRT Ltr no 21 dt 03-04-2023 s n 3
88.68
17824
201
INSTALLATION ETC OF
ABOVE MATERIAL(As Per Rate Senction By SE MRT Ltr no 21 dt 03-04-2023 s n 4
1
21000
21000
Supply and fillig of 1.6mm to 4.8mm pea gravel including cartage upto site loading and unloading etc complete. (DSR No. 23.7) Rs 1309.00-20%
18.3
19873
1086
Boring/drilling bore well of req. dia for casing/strainer pipe, by suitable mathod prescribed in IS:2800( part 1), including collecting samples from different strata , prepaing and submitting strata chart/bore log, including hire and running charges of all equip. as per DSR no 23.1.1.1 Rs 592.05-20%
60
29460
491
Providing and fixing bail plug /bottom plug of req. dia to the bottom of pipe assembly of tube well etc as per DSR no 23.15.2 Rs 281.75-20%
2
466
233
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Rs 5781.35-20%
2
9596
4798
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Rs 5540.55-20%
3
13794
4598
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Rs 10128.30-20%
2
16812
8406
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Rs 2040.85-20%
5
8465
1693
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Rs 131.65-20%
5
545
109
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia Rs 90.95-20%
7
525
75
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Rs 1411.15-20%
5
5855
1171
Providing and fixing toilet paper holder C.P Brass. Rs 680.80-20%
3
1695
565
Providing and fixing soil, waste and vent pipes :100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Rs 1077.44-20%
162.15
144962
894
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe. Rs 308.45-20%
12
3072
256
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989. 100 mm dia Rs 597.60-20%
8
3968
496
Providing and fixing plain bend of required degree: 100 mm dia: Sand cast iron S&S as per IS - 3989 Rs 439.75-20%
10
3640
364
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989 Rs 131.40-20%
4
2428
607
Providing and fixing terminal guard Sand cast iron S&S as per IS - 3989 . 100 mm dia Rs 439.75-20%
3
1092
364
Providing and fixing collar :Sand cast iron S&S as per IS - 3989. 100mm dia Rs 439.75-20%
10
3640
364
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100mm Rs 549.65-20%
104
47424
456
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100 outlet Sand cast iron S&S as per IS: 3989 Rs 1604.10-20%
14
18634
1331
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Rs 146.30-20%
5
605
121
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Rs 204.70-20%
5
845
169
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms RS 92.75-20%
2
152
76
Providing and fixing PTMT urinal cock of approved quality and colour.
15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms Rs 149.75-20%
2
248
124
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing
of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Rs 325.10-20%
189.54
50986
269
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing
of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Rs 408.55-20%
18.5
6271
339
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing
of joints complete as per direction of Engineer in Charge. 32 mm nominal dia Rs 500.95-20%
25
10375
415
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm Rs 461.75-20%
5
1915
383
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm Rs 589.90-20%
2
978
489
Providing and fixing uplasticised PVC connection pipe with brass unions (45 cm long and 15 mm dia) Rs 85.20-20%
12
840
70
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Rs10102.50-20%
2
16770
8385
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,
with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank. Rs 9.70-20%
1000
8000
8
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and
weighing not less than 690 gms. 15 mm nominal bore Rs 708.40-20%
5
2935
587
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (15 mm nominal bore) Rs 500.35-20%
12
4980
415
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal bore Rs 45.25-20%
14
518
37
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated
aluminium rod with L.P./ H.P.H.D. plastic ball. (25 mm dia ) Rs 459.40-20%
1
381
381
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Rs 96.75-20%
5
400
80
Earth work in excavation in foundation in ordinary soil i/c lift up to 1.50 m. & lead up to 30m including filling,watering and ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth i/c all as per comp. (S.I.No. 251)
0.91
100
110
Cement Concrite with 2cm gauge stone/Ballast, coarse/Sand of 2.25 Fineness modulous and cement proportion of 8:4:1 in foundation and under floors including supply of all matrial Labour T&P etc.including in all camp. (S.I.No..281 )
0.18
1035
5750
M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. S.i.NO-307(A)
0.37
1831
4950
R.C.C.work with cement, approved Coarse Sand & 20cm guage stone grit in proportion of 1:2:4 in T-beam and slab,Roof and R.C.C columns lintels of door ,windows and sunshades excludind supply of reinforcement and its bendind but including its fixing and binding the same with 24B.W.G.GG.I binding wire and including necessary centering and shuttering etc.and supply of all meterials,labour and T&Petc.required for proper completion of work .and including curing and binding wire of supplied by the contractor freeof cost etc. S.I. No284 A
0.16
1328
8300
M.S.(Tor steal or plain) in plain work such as R.c.c or R.B work including cutting Binding for proper shape & including all supply of steal and its wastage bend,hooks and authorised over lapping shall be measssuredetc. (S.I.No. 504)
15.7
1287
82
20 mm thick cement plaster with 1:3 neat cement and coarse sand mortar(DSR No 13.9.2)
1.49
342
230
2.5c.m thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone laid in panels finished with 3 mm.flooring coat of neat cement or cement and marble dust in 5:1 as specified over & removing any over lapping mortar at the joints of panelsif any and giving them a uniform finish including supply of all materials, labour and T & P etc. required forproper completion of the work. above but without base concrete. S.I.NO-605 A
0.2
46
230
Providing and laying 150mm PVC pipe (6kg.Per cm ) I.S.I. Including cost of P.V.C. i.e socket/tee/ elbow etc and including earthwork and cost of solvent complete(DSR no 23.3.2)For Boaring
40
22160
554
Boring/drilling bore well of req. dia for casing/strainer pipe, by suitable mathod prescribed in IS:2800( part 1), including collecting samples from different strata , prepaing and submitting strata chart/bore log, including hire and running charges of all equip. as per DSR no 23.1.1.1
40
19640
491
Providing and fixing bail plug /bottom plug of req. dia to the bottom of pipe assembly of tube well etc as per DSR no 23.15.2
2
466
233
Supply and wiring of submain with two number 2.5 sqmm frlsh PVC insulated 1100 V grade multistrand single core copper conducter cable in 20 mm dia heavy guage rigid steel conduit concealed in wall with one number 14swg copper earth continuity wire etc all complete sino 1304(B) electrical
60
12420
207
Crompton Submersible set of 1.5 hp including all
1
11660
11660
Crompton Submersible pump starter set of 1.5 hp including all
1
1694
1694
Earth work in excavation in foundation in ordinary soil i/c lift up to 1.50 m. & lead up to 30m including filling,watering and ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth i/c all as per comp. (S.I.No. 251)
74.5
8195
110
Cement concrete With 4cm gauge approved stone ballast coares sand and cement in proportion 8:4:1 including supply of all material,labour and tools and plants. ect. required forproper completion of work. In foundation and floors.S.I.NO-281
4.73
27197
5750
2.5 c.m thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone laid in panels finished with 3 mm.flooring coat of neat cement or cement and marble dust in 5:1 as specified over & removing any over lapping mortar at the joints of panelsif any and giving them a uniform finish including supply of all materials, labour and T & P etc. required forproper completion of the work. above but without base concrete. S.I.NO-605 A
18.48
4250
230
M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. S.i.NO-307(A)
18.9
93555
4950
R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Slabs excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (M-20) (For Slabs)
5.49
45567
8300
M.S.(Tor steal or plain) in plain work such as R.c.c or R.B work including cutting Binding for proper shape & including all supply of steal and its wastage bend,hooks and authorised over lapping shall be measssuredetc. (S.I.No. 504)
8.6
70520
8200
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar.
16
6112
382
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement (20 mm cement plaster).
85
35785
421
Supplying and fixing C.I. cover without frame for manholes (500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg)
14
37394
2671
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
23264
23264
Wiring for light point 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in 25mm Heavy duty PVC Conduct (2mm) in the wall with modlar box and modular Plate with Modular Switch with 15sqmm FRLSH single core conductor cabi as earth coninuty wire matching colour wash.Group B LIGHT POINT
160
109920
687
Wiring for Fan / fresher air fan (light duty exhust fan ) with modlar box and modular Plate with Modular Switch with 15sqmm FRLSH single core conductor cabi as earth coninuty wire matching colour wash .Group B FAN
27
20304
752
Wiring point for 5Amp plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in wall complete with 1.5 sq.mm. FRLSH PVC insulated multistrained copper wire as earth continuty wire inside the pipe with modular switch & Socket including modular board etc., complete in all respect including matching colour wash.
102
42636
418
Supply and fixing of power plug with 20A/250 V flush type switch and 5 Pin 20 A/250V flush type universal socket in suitable M.S. box including supply of all material, labor T&P etc. required for proper completion of work.
105
65625
625
Wiring Submain with FRLSH PVC insulated singal core copper cable in heavy duty PVC conduite pipe with earth continuty wire in concealed conduite in all respect as fellow 2 X 2.5 sq.mm + 1 X 1.5 sqmm earth wire
1600
212800
133
Wiring Submain with FRLSH PVC insulated singal core copper cable in heavy duty PVC conduite pipe with earth continuty wire in concealed conduite in all respect as fellow 2 X 4 sq.mm + 1 X 2.5sqmm earth wire
1580
249640
158
Wiring Submain with FRLSH PVC insulated singal core copper cable in heavy duty PVC conduite pipe with earth continuty wire in concealed conduite in all respect as fellow 2 X 6 sq.mm + 1 X 4 sqmm earth wire
1100
236500
215
Wiring Submain with FRLSH PVC insulated singal core copper cable in heavy duty PVC conduite pipe with earth continuty wire in concealed conduite in all respect as fellow 4 X 10 sq.mm + 2 X 6 sqmm earth wire
456
222528
488
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work( for Telephone)
2326
144212
62
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.
23
3220
140
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
17
3315
195
Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
23
3450
150
Supply of Ceiling Fan with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down road blades, shackle canopies etc and with double ball bearing system.BEE 5 Star rated-1200mm sweep
23
41400
1800
Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
23
11891
517
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.
CAT-AAA
32
156160
4880
Supply & fixing of recess/Surface mounting round 10 to 15 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respect.(CAT: AAA)
32
43200
1350
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.
CAT-AAA
14
63700
4550
Supply and fixing of 17 watt LED Mirror Light and complete in all respect.
3
3705
1235
Supply and fixing of LED tubelights with metl heavy duty box type batten light fitting 2x22 watt suitable for upto 2x22 watt LED polycarbonate tube light complete in all respect CAT -AAA
80
143200
1790
Supply and fixing of surface/flush mounting distribution boards with additional metal door without MCB complete in all respects.(CAT A) 6 Way TPN
5
21850
4370
Supply and fixing of surface/flush mounting distribution boards with additional metal door without MCB complete in all respects.(CAT A) 8 Way TPN
3
15630
5210
Supply and fixing of surface/flush mounting distribution boards with additional metal door without MCB complete in all respects.(CAT A) 6 Way VTPN
2
18900
9450
Supply and fixing of 6Amp to 32 Amp (10 KA)SP MCB in existing MCB, DB complete with connections as required. (CAT: A)
162
42120
260
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A)6 Amp. to 32 Amp. 4P MCB (10 KA) C Curve (CAT: A)
2
3200
1600
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A) 63 Amp. TP MCB (CAT: A)
8
14320
1790
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A) 40 Amp. FP MCB (CAT: A)
5
11375
2275
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A) 63 Amp. FP MCB (CAT: A)
17
38930
2290
S & F sheet steel enclosure for T.P/ 4P MCB (CAT: A)
20
17000
850
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT: A)
120
3000
25
S&F of 125 Amp 4 pole MCCB CAT-A ( 25 K ) thermal magnetic release
2
21230
10615
Providing fixing of 63 amp TPN disconnected fuse switch unit inside the axisting panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 3144.00-20%
55
143495
2609
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 240 sqmm 3.5 core
250
344750
1379
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc70 sqmm 3.5 core
310
190030
613
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 10 sqmm 4 core
450
147150
327
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 10 sqmm 2 core
350
102200
292
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIncharge 240 sqmm 3.5 core
6
2838
473
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIncharge 70 sqmm 3.5 core
22
4378
199
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIncharge 10 sqmm 4 core
22
1914
87
Supplying and fixing of Plain / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.240 sqmm
18
4896
272
Supplying and fixing of Plain / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge 150 sqmm
3
438
146
Supplying and fixing of Plain / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge35 sqmm
22
682
31
Supplying and fixing of Plain / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge70 sqmm
66
4422
67
Supply and burring of safe earthing electrode T-19 (Hot Dip Galvanized) length upto 3000mm outer dia 50mm inner dia 25mm terminal dia 12mm outer GI pipe galvanization up to 100micron filled with CMM having anti corrosive & capable of reducing the soil resistivity with good mixture of reting capacity and one earthing lead 25mm x 3mm GI strip upto switch board along with 30cm square C I frane with honged cover and masonry housing.all respects.
15
150600
10040
Supply and laying of 32mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
336
50400
150
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
336
30240
90
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.ll bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
1
221091
221091
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mm X 75 mm) Rs 298.00-20%
2
494
247
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.Telephone socket outlet Rs 148.00-20%
2
244
122
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.2 Pair Rs 38.00-20%
120
3720
31
Supplying telephone wire following pair 0.6 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.5 Pair
200
16000
80
S/f of 10 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same
1
3000
3000
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness. RS 669.00-20%
250
138750
555
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 150 mm wide x 50 mm depth x 1.6 mm thickness. Rs 716.00-20%
200
118800
594
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm wide x 50 mm depth x 1.6 mm thickness. Rs 1159.00-20%
40
38440
961
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness. Rs 1270.00-20%
35
36890
1054
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm wide x 50 mm depth x 1.6 mm thickness. Rs 1327.00-20%
10
11010
1101
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.Rs 1383.00-20%
10
11470
1147
Providing, Laying and Fixing following Dia RCC Pipe NP 2 Class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 ( 1 Cement : 2 fine sand)including trenching ( 75 cm) deep and refilling etc. as required. 150mm dia Rs 724.00-20%
50
30000
600
Supply of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
5
12800
2560
Supply of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 600mm sweep.
14
111860
7990
Supply and fixing of Stand for AC installation
14
21000
1500
Supply and fixing of Copper Pipe
140
133000
950
Supply and fixing of Water exhaust Pipe
140
35000
250
Supply and fixing of fire extinguisher ABC type 6.00 kg.capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper complition of work
15
136500
9100
Supply and fixing of fire extinguisher CO2 type 6.5.0 kg.capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper complition of work
15
298500
19900
Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. Rs 269.00-20%
3
669
223
Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. Rs 292.00-20%
3
726
242
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
4
1960
490
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
13
33150
2550
Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules
2
170
85
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
2
610
305
Supplying Installation of split direct expansion air conditioners suitable on operation on AC Supply single phase 50Hz 230Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitor, relay and over load protector internal unit, with one indoor unit and outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/Cordless) Suitable capacity 3Core shearthed /PVC copper cable and a battery operated wireless remote. 1.5Tr (BEE 5 Star rating : EER 3.4)
5
215000
43000
Supplying Installation of split direct expansion air conditioners suitable on operation on AC Supply single phase 50Hz 230Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitor, relay and over load protector internal unit, with one indoor unit and outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/Cordless) Suitable capacity 3Core shearthed /PVC copper cable and a battery operated wireless remote. 2 Tr (BEE 5 Star rating : EER 3.4)
8
400000
50000
Supply and fixing of 4KVA (150 v to 280 v ) Copper Wound stabiliger ( vailed upto 2.00 KVA tonne A.C.
15
102000
6800
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements