Rural Engineering Department Tender

Class-150 brick work in 1:4 cement and Corasand of fineness modulus mortar in foundation and plinth including supply of all material, labour T&P etc required proper completion of work.as per DAR 6.1.1

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density.

25 mm thick 1:2:4 Plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone grit laid in panels finished with 3 mm neat cement slurry including supply fo all materials, labour and T&P etc. required for proper completion .

12 mm thick plaster with cement mortar in proportion of 1:4 cement and four part of approved coarse sand as ped DAR 13.4.1

Construction of plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.

Supply and fixing of Mild Steel Road signboard of 1.5/1.2 ms Sheet and 2.1 m hight including ,painting, writing, fixing, and also including supply of all meterials, labour and T&P etc. required for proper completion of work,